No received SNMP alert message

Similar Questions

• How to use this forum - is there a way I have a reception, an alert message?

  Hello world
  
  Is there a way I can receive an alert message when I post
  or when I want to follow another post?
  
  Is there a way to receive an email summary of the accounting day of actiivity?
  
  pls advise, tx, sandra

  Hello

  You must first login to your account to OTN. Make sure that you have configured your email in your control panel (click the link to the upper left corner, if you are not sure).

  You can configure your alerts in multiple ways. See the control panel for ideas. Personally, I don't like the alerts. When I turned them, my email account was flooded.

  Have you ever noticed the spy glass and Watch This Post just above the list of positions? When mailed, here and now, you will receive all the emails you've always wanted to see.

  Kind regards
  Nancy

• Traps to receive SNMP

  Hello.
  
  I read some posts on this subject, but I still don't understand how to set it up.
  
  [Here is the message:]
  http://communities.VMware.com/message/1916186#1916186
  ]
  
  Suppose I want to monitorize a CISCO switch, which sends snmp traps to the host where I installed the hyperic server.
  
  Its very simply to create the platform, using the snmp community and soon he will appear with his iFaces.
  I would now like to detect traps that it sends to the server.
  
  Now, dougm wrote:
  "The problem is that HQ agent must be able to bind to udp by default 162 to listen.  However, this can be changed in agent.propertieslike so:
  snmpTrapReceiver.listenAddress=udp:0.0.0.0/1620 ".
  
  But, what agent?
  I installed a local agent on the same server and I looked for this property, and I couldn't find it.
  
  Could someone explain it to me please, step by step?
  
  Thanks in advance.

  There is a difference between the implementation of the SNMP traps to be sent by the Central and the HQ to receive SNMP traps. Changes to SQL, you are talking about is to allow a hatch to be generated by an alert for the ignition of the AC, and it is a feature of the Enterprise product. Documentation on this configuration can be found here:

  http://support.Hyperic.com/Confluence/display/DOCSHQ30/enabling+SNMP+traps

  Receive traps from SNMP devices able to send them is part of the Open Source and versions of HQ company. The process by which you the configuration and use of SNMP interruptions came into HQ was not well documented, we have added new information to facilitate an implementation of SNMP trap on a HQ agent receiver and then configure the network device to act on these traps. See here:

  http://support.Hyperic.com/Confluence/display/DOCSHQ30/agent+SNMP+trap+receiver

  Other questions or comments welcome as a continuation of this thread. Specifically, some have launched around the idea that it may make sense to change the value default listening port officer breaks SNMP from 162 to 1620 (from port to port without privileges). This would allow the installation of SNMP trap receiver work as a non-root user by default and doesn't require so no change in the agent.properties file.

• Facebook watch notification "you have received a new message" instead of the text preview...

  Facebook watch notification 'you have received a new message' instead, the preview of the text... because it did before... I have the chrome browser and Mac OS X Mavericks. Something has changed this week or so because two weeks ago it was beautiful. I read an excerpt of the message right in the notification Center, it was really cool!

  Is someone has the same behavior now?

  Welcome karffe,

  I can see why it is important to be able to see your notifications completely when they arrive and I'll be more than happy to help resolve this.

  On your Mac, in the upper left corner, select the Apple logo and select System Preferences. Once here, select Notifications, then you should see listed Facebook. Click on Facebook and then make sure that the alert style is set to "alerts." This should now give you an overview of what talk notification.

  See you soon

• I just received this alert from Safari

  I just received this alert from Safari, . Phone number doesn't seem to be a real number of Apple support. Is it a phishing attempt or a genuine issue that I need to address?

  It's a scam. Choose force quit from the Apple menu, close Safari and then run it with the SHIFT key. If the message reappears, disconnect the computer from the Internet and close the tab that the alert came.

  (139904)

• Why can not receive sound alerts from Windows Messenger more

  I work on Hotmail, I stopped recently been informed by the SOUNDS or ALERT message that I received the mail, there are nec'y for my work, how can I get the sound alerts back thanks.

  Hi a-roze,.

  I recommend you post your question in the Windows Live Solution Center for assistance.

  Portal Messenger

  Hope the helps of information.

• Not sent to OME SNMP alerts

  Hello

  I have a small problem to configure my switch PowerConnect 5448 to talk to my open Server Management Essentials.

  I set up the snmp trap as in 'Making my environment Manageable.pdf.

  And by using troubleshooting utily of OME, I am able to communicate with the switch.

  The problem is that one of the fans is out of service and I don't have any information about this at OME.

  My question is, I have to implement something more (MIB,..) in OME or switch?

  In addition, the fan was out of use before you configure snmp interruptions... but I saw that OME see events of the month of other machines before they have been implemented...
  The show snmp output is:

  See the snmp console #.

  SNMP is enabled.

  Community community-access view name IP address string
  -------------------- ------------------ -------------- ------------
  dell_ome read only OME srv IP default
                                                                  
  Dell_Network_Manager read write DefaultSuper All
   
  Group Community-String name address IP Type
  ------------------ ------------ ------------------- ------
   
  Traps are enabled.
  The authentication failure trap is enabled.

  Notifications of the version 1, 2
  Udp target address community Type to the attempts of Version filter
  Name of the dry port
  ---------------- -------- ----------- ---------- ----- ------- ----- ---------
  OME srv IP trap dell_ome 2 162 0 0

  Notifications of version 3
  Udp security target address Type attempts username filter
  Name of the dry Port level
  [0mMore: , quit: q, one line:]
                                              
  ---------------- -------- ----------- -------- ----- ------- ----- ---------
  Console #.

  I have nothing under SNMP 3 and can't seem to enable it

  show the system - part fan:

  Power supply Status: OK
  1 table of fan: OK
  Fan 2 status: NOT OPERATIONAL
  Fan 3 Status: OK

  And OME comes to shows me that everything is 'green' on this switch.

  I searched Google and Dell times but can't seem to find more details, so I ask here if someone could help me :)

  Thank you!

  Best regards

  Liliana

  Hi and thanks for the question and good detail.

  So I guess the switch is displayed correctly in the OME devices tree and when you click on it you get a bit of inventory information, etc.  And you said that health currently appears green.

  OK, so if the alert happened in the past (before the implementation in OME), then you won't see in the alert console OME.  The thing that you might have seen, is if some type of device sends the same alert repeatedly.

  You confirm that you have changed the SNMP settings on the switch to run the SNMP alerts to the IP address of the server OME?  Your message makes it look like you have done this correctly, assuming that the IP address is correct.

  For some switches, just the Act of logging in the switch will generate an information alert.  Not sure about this model.  See you new alerts in OME this switch or you have a way to generate an alert of the switch as test by logging?

  BTW, OME has no support for v3 alerts, only v1/v2.

  Thank you

  Rob

• How to get the alert message while trying to open a file, folder, or drive?

  How to provide a warning message when opening a file, folder, or drive, such as I had in my disk recovery and back the file, but once I opened it, that message never came again, I want this parameters with some of my important files. so, how do you restore this setting? and how do you get to my files?

  Hello

  Thanks for posting the question in the Microsoft Community forums. According to the description, you need help to get an alert message when you attempt to open a file, folder or drive.

  The alert message you received disk and backup recovery file is supplied by the manufacturer.

  There is no message alert option in Windows. You can search for any third-party application, using your favorite search engine.

  Note:  This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Hope this information helps. For any help about Windows, you can still post on the Microsoft Community Forum.

• A doubt about the alert Message...

  Hello
  
  I am very new to Oracle Forms & I use Forms 6i.
  
  As I practice some bases as 'Validation' a text element I went by a few examples of code to bring or poping-up alert messages...
  
  Here is my Code... in this I don't understand Y... .do write us the 'Message ('no msg')' line TWICE... ??
  
  Although I commented on the 2nd one... but there must write two times... & wat is the logic behind it...?
  
  Help, please...
  
  ---------------------------------------------------------------------------------------------------
  Begin
  
  If (: aijaz_emp_master.em_dob >: aijaz_emp_master.em_doj) then
  
  set_item_property ('em_dob', current_record_attribute, 'VA_ERRORS');
  
  -If (: aijaz_emp_master.em_dob is not null and (: aijaz_emp_master.em_doj >: aijaz_emp_master.em_dob)) then
  message ("DOB must b higher or NULL MJ '");
  -message ('wort upper b DOB or NULL MJ');
  
  raise form_trigger_failure;
  
  on the other
  set_item_property ('em_dob', current_record_attribute, 'VA_NOnERROR');
  end if;
  
  end;
  ---------------------------------------------------------------------------------------------------------

  MIRA,
  I agree that this can be a little confusing, but once you understand the difference between messages and alerts it will make sense.

  In Oracle Forms, a 'Message' is any information that is displayed in the 'Message' of the forms Console line and requires no interaction with a user. The console is displayed at the bottom of the window and includes the 'Message line' and 'Statue line. If the message line already has a message, and then forms will promote the message in an alert (popup window) and the nouveau/deuxieme message is displayed in the message line. In general, many forms developers will use this "Double-Message" method to display information in an alert because it is less lines of code to assign the text of the message in an alert and then display the alert. It is advisable to always call the built-in function Clear_Message() before calling Message built-in to prevent unintential * promotion message.

  An alert in a physical object in a form of Oracle (note: there is a 'Alerts' node in the browser of object of forms). There are three types of alerts of forms: Note, attention and stop. Display the notes information, precautions display warnings and errors off display program, or critical information. In order to display an alert, you must first create an alert object in the Alerts node. You can create an Alert object for each of your posts, but this creates clutter and can be confusing. I prefer to use three alerts - one for each type (Note, attention, Stop) and then programmatically set the title, the text of the message and the buttons (max 3). As you can see, there is more work involved to display an alert. In addition, the integrated Display_Alert() is a function if you need a variable to receive the value returned by the call to Display_Alert.

  Here is an example of using e-mail in the forms:

  /* Standard message */
  BEGIN
     Clear_Message;
     Message('Display in the Message Line only');
  END;
  
  /* Message to display Alert */
  BEGIN
     Clear_Message; -- make sure you don't accidentally promote a different message
     Message('Display in the Default Alert');
     Message('Display in the Default Alert');
  END;
  
  /* Message displayed in a Note Alert */
  /* Assumes an Alert of type "Note" has already been created. */
  DECLARE
     al_id      ALERT;
     al_btn    NUMBER;
     v_msg    VARCHAR2(200); /* Max Characters that can be displayed in an Alert */
     v_title    VARCHAR2(78);  /* Max title characters */
  BEGIN
     al_id := Find_Alert('Note');
     IF NOT ID_NULL(al_id) THEN
        v_title := 'This is an informational message';
        v_msg := 'This is an informational message that requires the user to acknowledge the message';
        Set_Alert_Property( al_id, TITLE, v_title);
        Set_Alert_Property( al_id, ALERT_MESSAGE_TEXT, v_msg);
        al_btn := Show_Alert( al_id );
     END IF;
  END;
  

  Personally, we have a library package, we have created to simplify the display of alerts and allows you to set the properties of the alert and display it in a single call.

  /* In this sample, I use named notation to
  illustrate the meaning of the different parameters
  in our wrapper package. */
  DECLARE
     al_button  NUMBER;
  BEGIN
     IF (:aijaz_emp_master.em_dob > :aijaz_emp_master.em_doj) THEN
        set_item_property('em_dob', current_record_attribute, 'VA_ERRORS');
        al_button := message_pkg.warning( TITLE => 'Warning: DOB Required',
                                    MSG_TEXT => 'DOB must b NULL or Greater tahn DOJ',
                                          BUTTONS => 'OK');
        raise form_trigger_failure;
     ELSE
        set_item_property('em_dob', current_record_attribute, 'VA_NOnERROR');
     END IF;
  END;
  

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

  Published by: Silvere December 13, 2010 10:31

• IPhone 5 s 'message' I send gets received also several messages cut off an iPhone no.

  When I send a message to users an iPhone not they receive as several messages cut into two or three line only messages. My message is transformed into 3, 4 or 5 messages according to how long mine is.

  Iphone to iphone send the message gets received only one message as it was sent. If this is corrected on my iphone 5s in the Middle somewhere that I've missed?

  It's normal light depending on what type and age of the device of recipients. There is nothing on the iPhone that will change how non - iOS devices to receive your messages.

• Thunderbird guard receives the same message.

  On an old desktop PC, always under XP with AVG free antivirus. I let my AVG computer can be updated at night. All of a sudden Thunderbird had received the same message over 200 times. It took a while to remove them all, and now I must leave off Thunderbird so it will not continue to receive this message. It is a message from my sister that contains a few attached images, photos from his camera, and the webmail message appears only once. I change not all configurations, except after this problem started, updated to Thunderbird 31.6.0 to 31.7.0. Any ideas?

  Try to remove the message via webmail or move it to a different folder on the server.
  It is highly unlikely that the update of TB is the cause. It is more likely Avast is playing with Thunderbird files.
  So the Thunderbird profile folder should not be scanned by anti-virus software.

• I have two computers on the same router. One, on Xp and Eudora normally receives. The second on WIN-7 and Thunderbird receives the same messages in code -?

  I have two computers-
  On WinXp and Eudora receives emails in normal text.
  Sometimes, the other on Win-7 and Thunderbird receives the same message in code.
  Normally, this same message is received on the other computer.
  What have I've set wrong
  GerryMcDonald

  Start with view-> Message-> HTML Original body

• Why what I receive update alerts, but, when I check, I said I use the latest version of FF?

  Why what I receive update alerts, but, when I check, I said I use the latest version of FF?

  Try to repair disk permissions:

  • http://thexlab.com/FAQs/repairprocess.html

• I get an error message Firefox is already running. I rebooted and redownloaded the program and continue to receive the same message

  Question
  I get an error message Firefox is already running. I rebooted and redownloaded the program and continue to receive the same message

  See:

  • https://support.Mozilla.com/kb/Firefox+is+already+running+but+is+not+responding
  • http://KB.mozillazine.org/Profile_in_use

• reformatted my mac pro. copied from iPhoto from the external backup drive. received the error message saying lack of theme fonts. removed the app to be able to reinstall. but my app store it shows as installed. How I install it again.

  reformatted my mac pro. copied from iPhoto from the external backup drive. received the error message saying lack of theme fonts. removed the app to be able to reinstall. but my app store it shows as installed. How I install it again. the deleted copy is missing in the trash folder too.

  Unplug your backup disk, restart, and try again.