No search or profile themes - please don't help
I read that there is some problems indexing on the search, but it seems that user profiles were not all themes. Themes are going up in the RSS feed and the sides, but if I click on the user to see what other themes we produce, he says there are no topics to display. Even for users I know have a ton of themes.It is part of the same series of indexing. It was fixed at the moment and we are working on a permanent solution. Thanks for the update.
Tim Strickland
lead geek kuler
Tags: Adobe Capture
Similar Questions
-
Fujitsu Siemens Amilo M3438G laptop no sound after upgrading to Windows 7 please don't HELP
Hello
Please can someone help me.
I "improved" XP to Windows 7 on my mums laptop, but now there is no sound whatsoever!
Ive tried the site of siemens and their http://www.forces.gc.ca/CRS/RPT/reports_f.htm#YEAR2005 drivers do not work. Ive also tried older realteks and latest drivers including XP Vista and Windows 7.
All I get is Microsoft install HD Audio device ready to use? But it's not?If someone help me successfully to solve this problem, I will make a donation to a charity of their choice.
Thanks for reading
Hi Umaruk,
I appreciate the steps you tried until now to install the drivers for XP/Vista. Unfortunately, this has not helped.
This notebook is compatible with Windows XP. I suggest that you check if the computer is ready to install Windows 7 or not.
Please check the links below:
Your product is ready for Windows® 7?
Windows® 7 Support for Fujitsu laptop computers and microcomputers
Click on the link: http://ts.fujitsu.com/support/downloads.html
If the problem persists, I suggest that you contact the manufacturer of the computer and check if they have the latest drivers available for windows 7.
Thank you, and in what concerns:
Swathi B - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
No sound for a HP ZV6000 - please don't help
Thanks in advance for anyone who sees this and tries to help me.
I have recently reinstalled the partition on my computer. In doing so, I apparently lost my audio drivers. Downloaded the recommended outside the site of HP... BUT, it doesn't work, or more accurately, impossible to install.
They recommended that I use the Conexant AC-Link Audio driver that I downloaded and installed two different moments.
But when I try to install, my computer says that the file already exists on my computer. But I told him to go and rewrite the file with the new. But when I do it, it gives me an error message saying that 'swsetup/audio/setup.exe' is not found.
I don't know how to remedy this situation. If anyone can offer any suggestions, I'd love to hear them.
Well, I have solved my problem. Where this has happened to others, I will explain how I solved it.
The .exe file I was told to download was OK, but it's basically a self-extracting executable... but there is an error with the automatic extraction of the part. So I bypassed the executable and extract the files manually. Download the file as usual, but instead of activating the executable instead right-click on it and extract using Winzip or 7zip. Once the files are extracted, you can simply run the installation executable file... and voila!
-
I already tried to solve the problem, but it don't stop me sound card and I know that I have one it's a driving weard
Hello Cluedog,
Thank you for your message. Go to the Web site of the manufacturer of your computer and download/install the latest audio driver for your computer. Please let us know if this or do solve you the problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
HP 250 G1, no complete package driver HP please don't help.
Hello
I have 25 machines HP250 G1 that I'm trying to build to Windows 7. HP do not have a pack full driver for Windows 7 32-bit or 64-bit. The pilot collection only I see is for 64-bit Windows 8, so I don't see why another operating system is listed...
If anyone can help me, it miss the Ethernet driver and graphics driver.
Kind regards
Harry.
Hello:
Here are links to the drivers you need:
Bus SM
Wireless:
-
MSI GTX760 no video, please don't help!
I plug in the card and I get 6 long beeps and no video. Using a new EVGA 500W I tried all combos of 6/8 power supply pins. PC is old, several mos
Windows 8 64
AMD 6 core 3.5
6 gig Ram
old card was the Radeon HD 7450Don't know what I can do?
Hello:
PC under Windows 8 presents a whole new learning curve.
So even something too systematic to install a video card is frustrating.
You must change some settings of the BIOS with a W8 PC and a video card no HP, and afterwards, you should be fine.
The info on the link below, you should get your present dilemma.
-
Hello, I installed MAX (measurement and Automation Explorer) 5.1.0f0 Runtime of NI - VISA (5.1.1) and also direct,
but there is NO 'series and parallel' in 'Devices' (Geräte und interfaces).
What's wrong?
I already reinstalled and restarted the PC, but nothing helped.
Any idea?
Ahhh,
I'll have to download OR-Serial
I thought, NOR VISA is enough...
Ok
-
Okay, so my problems are...
(1) I downloaded a theme for the first time and when I did, it worked perfectly fine. After updating, I download the theme again and it helped, but the theme will not change the look of my browser. When I tried one of the relevant articles, I cleared my cookies and cache and downloaded the theme (A Blue Fox), installed and turned on, and it worked perfectly fine! I tried to upload another (Pink Fox), one installed and activated, but it did not work. Instead, he returned to the default theme. So I tried to clear my cache and cookies again and repeat the process, but now after downloading, it says "error".... "I don't know if it says"Error Downloading"or"installation error ". Now, I tried to download it again after turning off my computer and turn it back on again, but (today), the two has not applied to my browser. They both had the same look... by default! Please tell me what is the problem!
(2) in my "Add-ons Manager" page, on the appearance tab, there is no button disable for my modules. Only the "delete" button is present.Please help me!
NOTE: I already tried to reset Firefox, but it does not solve my problem.
You do not disable a theme, but you choose another theme if you want to change the theme.
Remove button is for when you no longer want this theme.You must select a theme and then close and restart Firefox, if you want to use this theme.
If this does not work, then you may have a problem with the prefs or something interferes.
If you don't keep changes after a reboot then see:
-
Satellite L50 - B - 2FC - no device capable of starting please don't restart
No boot device able to please don't restart. How to do
Enter your BIOS, make sure that UEFI is enabled, or if you are using a linux operating system allow inheritance.
-
where are the printheads on Canon ip4850 so I can clean them, please
where are the printheads on Canon ip4850 so I can clean them, please... as usual now, impression, all cartdges, & have used harsh cleaning several times... Thank you
Ray
Hello.
Take a look at this Web site, it shows the procedure to clean the printheads on your Canon:
-
My friend was rename his photos on his laptop computer. those named remained and the other in the folder disappeared. How can she get back them please?
Hi christinecave,
Take a look at the article here about the recovery of the lost files.
I hope this helps!
-
Hello
I deleted the creative cloud of the trial and the DM Dream weaver of the trial, after only using it for about 6 days, I tried to re-download the two tests and nothing happens. Anyone know how I can get this done. Please advise, your help will be greatly appreciated.
Hello
Also see also software Adobe to trial has expired at the beginning
Hope that helps!
Kind regards
Sheena
-
I have a document that keeps returning, "trust settings are not activated.» How can I activate them please?
Hello
Please check the following thread.
Let me know if it helps.
Thank you
Abhishek
-
Hoi
Ive just updated to 2015 and all photoshop my ins plug attached to my previous version disappeared. Someone knows how I get back them please?
Thank you
Hi alanp
We recommend that you reinstall your Plugins after downloading the latest manufacturer's Web site.
View 2015 release of Photoshop CC: FAQ
Concerning
~ Assani
-
By clicking on objects to pick them up. Need help please
Hello
Following my other thread: http://forums.adobe.com/thread/775468?tstart=0
I'm trying to find how to make my game so that if you click on objects you can pick up. That is, click and hold the mouse on an object it will seek, move the mouse will be to follow the mouse, release the mouse will drop the object.
I use the Havok xtra.
That's what I have right now:
-Created the field, a box and a character.
-Do the arrows move the character forward, backward and turn left and right
-The camera made a child of the character
Then I put in place the Havok Physics:
-Created a piece of media physical scene Havok.
-Apply a physical behavior of Havok (No. HKE) in the 3D world.
-Make the box a removable rigid body and the gound a rigid body fixed as follows:
-installation havok (box)
pHavok = member ("EmptyHavok")
pHavok.gravity = vector (0, 0, -300)
pBox.addModifier (#meshdeform)
pHavok.makeMovableRigidBody (pBox.name, 1000.0, true, #box)
-installation havok (ground)
pHavok = member ("EmptyHavok")
pHavok.gravity = vector (0, 0, -300)
pPlane.addModifier (#meshdeform)
pHavok.makeFixedRigidBody (pPlane.name, true, #box)
Physical work, now I need a way to click on the box to pick it up.
What I want to do is exactly the same as in this tutorial: http://www.deansdirectortutorials.com/3D/Havok/
You can see the result here: http://www.deansdirectortutorials.com/3D/Havok/tutFiles/3DobjectsImportedHKE.dir
But I use objects created Director and no. HKE. I can't make it work, when I try to apply the behavior of the mouse down it won't let me (no idea why?)
Can I use the code inside the mouse to the bottom of behavior to do this?
Need some advice please. Any help is very appreciated.
The type of error you describe is revealing a list of incorrect model (all items in the list must be valid models in the 3D world).
If pBoxHitBox1 and pBoxHitBox2 refer to models (rather than strings), all you need is:
tModelList = [pBoxHitBox1, pBoxHitBox2]
Maybe you are looking for
-
new tabs keep opening at a frantic pace, when I download the mail etc.
Whenever I try to download a letter so that I can print it opening new tabs keep at a frantic pace
-
If I type a few letters of a Web site I visit, the menu name drop-down will appear with the name of the entire site. I used to be able to just click on name & Firefox took me there. Now, the name appears in the bar, but I have to go to the end of the
-
Light sensor ambient iMac 2012
My iMac has clearly a sensor of ambient light as I can see the screen change when turning on/off the light. My question is about the 'normal' position of the brightness slider, because it seems that the brightness of the screen changes automatically
-
complaints from xBox - easy process?
Hi, anyone knows why there are no complaints on the menu for xBox section? I had a bad signal playing BlackOps2 and the game kept out me and finally I got a message to say that I was suspended to quit early, so clearly he was a signal problem! Intere
-
Update of jellybean, album driving bad app
I'm not able to see thumbnails of all the pictures stored on the internal memory as external. I tried to fix this by resetting the phone, but he continues. Help me out of this.