No source for the animation of the green arrow

Similar Questions

• How to check the image source for the image which is losted?

  Hello world

  How to check the image source for the image which is losted?

  If the image source already exists, I can read the PlaceItem.file.fsName.

  But if remove the image of the source, read the PlaceItem.file.fsName will report the error: there is no file associated with this element

  Thank you

  If (app.documents.length > 0) {}

  var sourceDoc = app.activeDocument;

  sourceName = sourceDoc.name var;

  artItem =]

  for (i = 0; i < sourceDoc.pageItems.length; i ++) {}

  artItem [i] = sourceDoc.pageItems [i];

  If (.) TypeName artItem [i] == 'PlacedItem') {}

  If (.imageColorSpace [i] artItem == undefined) {}

  Alert ("the file is the link, but I don't know whether or not the source image is losted");

  }

  }

  }

  }

  Use try/catch to catch the error

  if (app.documents.length > 0) {
      var sourceDoc = app.activeDocument;
      var sourceName = sourceDoc.name;
      artItem = []
      for (i = 0; i < sourceDoc.pageItems.length; i++) {
          artItem[i] = sourceDoc.pageItems[i];
          if (artItem[i].typename == 'PlacedItem') {
              if (artItem[i].imageColorSpace == undefined) {
                  try {
                      var fname = artItem[i].file.name;
                      alert("file name: " + fname);
                  }
                  catch (e) {
                      alert("The file is linking ,but source image is lost");
                  }
              }
          }
      }
  }
  

• ERROR: Cannot open the data source for the user

  Hello, I followed the instructions in the URL below
  
  http://gavinsoorma.com/2010/02/GoldenGate-installation-Oracle-11g-on-Red-Hat-Linux/
  
  and I get the ERROR: cannot open the data source for the user
  
  I run the sql for the role but nothing
  
  any ideas please.
  
  Sun solaris operating system
  database version 9.2.0.7

  Previous question that you were:
  Where did you get the GoldenGate for Oracle 9i software?

• No Source for the BMS in the Tuxedo ART cards

  I was looking at the product of the Tuxoedo ART. I looked at the examples provided in for the duration of the CICS. It seems that the samples do not have the source card BMS. Is it possible that anyone can publish the source for the abanner.mpdef and csignon.mpdef cards.
  
  Thank you

  Faisal,

  You can find the source of bms RSSBM0x.bms in the Workbench ART sample, i.e. the samples/STDB2ORA/source/card.
  I agree that it is better, if the source of bms is also available in the runtime ART CICS sample because it can be used to generate the cpy and mpdef.

  Kind regards
  Jared

• Source for the textlayout demos?

  Hello
  
  I would like to get their hands on the source for the demo of text available at http://labs.adobe.com/technologies/textlayout/demos/
  
  Would this be possible?
  
  Thank you

  The example source code that we provide for the world class text tour and in our packages to download is the scope of the examples we provide as part of this beta. My apologies, but we are not providing the source for the demo of text layout.

  If there is something more specific that you are trying to find a way to implement, please demand on these forums. We can put more examples here on the forums or our blog team for you help to recreate the features available in this demo.

• I just upgraded from 5 to 6. My "Enter" key no longer works when I enter a url and press ENTER, Ihave to click the green arrow at the end of the url. How can I fix it?

  If I type a url and press on enter it does not find this website, I have to click the green arrow at the end of the url box.

  If I choose a url in the url box drop he won't find the web site, I have to click the arrow on the green at the end of the url box for that to happen.

  Had the same problem. Then advise and traced my problem of "AVG Safe Search 10.0.0.1390. Normally, it would have disabled (not compatible with 6), but I also add on compatibility reporter 0.8.7 allowing him to run again.

  Disable AVG Safe Search and everything was OK again (for me)

• Why I have to click on the green arrow in the location bar instead of pressing ENTER to invite the new Web page to load?

  When you enter a web page (for example, www.aol.com) I would normally hit the ENTER button on my keyboard and opens the Web page of aol. However, using Firefox 4.0.1 on my desk, I have to enter the webpage (e.g., www.aol.com) and then use the mouse to right click on the tab of the green arrow to the right of the address bar. This is not the case on my wife's cell phone, however. And it uses the same version of Firefox.

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  In Firefox 4, you can use one of them to start in the questions to troubleshoot Firefox in Safe Mode:

  • Help > restart with disabled modules
  • Hold down the SHIFT key while double-clicking the shortcut from the desktop Firefox (Windows)
  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• The green arrows front and rear under file and Edition disappeared after I downloaded the new Firefox toolbar. How to recover?

  The green arrows to page forward or backward at the top left under the file and edit disappeared after I downloaded the new toolbar for Firefox (for 3.6) and was replaced by the most visited, getting started and last new icons, which I have little use for. How to bring back the original toolbar?

  If the Navigation toolbar is not be displayed? See below.

  Don't see the menu bar not (File, Edit, View, history, Favorites, tools, help)?
  Turn on/off the menu bar is a new feature in version 3.6.
  (~ ~ Red: Linux and OSX see ~ ~: what happened to the file, edit and view menus? )
  Windows Method 1. Press and hold the key and press the letters of the following in this exact order: V T M then release the key
  Windows method 2 Press the F10 key, while the Menu bar, choose "view > toolbars", click on 'Menu Bar' so that a check mark next to the Menu bar
  Method Windows 3 Press and release the button. The Menu bar is displayed; then choose ~ ~ red: V ~ ~ iew > ~ ~ red: T ~ ~ oolbars and click on ~ ~ Red: M ~ ~ enu Bar as well as a checkbox is placed next to Menu bar
  The menu bar should now be displayed permanently, unless you turn it off again using view > toolbars. Check = not displayed, NO check mark is not displayed.
  See:

  http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
  

  http://KB.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
  Navigation, bar toolbar bookmarks and other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).
  To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).
  Mode full screen
  http://KB.mozillazine.org/netbooks#Full_screen

  See also:
  Back and front toolbar buttons or others are missing
  Customize controls, buttons, and Firefox toolbars
  How to customize the toolbar

• I read the excellent instructions, but cannot locate the green arrow to start the download! I did not accidentally remove the arrow, because he was never

  I went on the Mozilla site to download to my Mac. I read the excellent instructions, but cannot locate the green arrow to start the download! I did not remove accidentally the arrow, as it was never there to be seen. I use Safari and don't have Firefox on my MAC (to my knowledge).

  Thank you

  PS: I clicked on the 'automatically add' and downloaded the file, but when I tried to open it, I get the message "Safari cannot read this file. Cool, huh?

  See how to install Firefox on Mac.

  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac
  • http://KB.mozillazine.org/Installing_Firefox#Mac_os_x

  Open the Firefox disk image file and drag the Firefox program into the Applications folder on your hard drive.
  Do not double-click the Firefox to run from the disk image, but instead, drag it out of the DMG file.

• When I type or paste a URL into the address bar or select a url from the address bar dropdow, the "enter" button does nothing. I have to press the green arrow to load the url?

  Each time it manually to enter a url, past a url, or select a url from the address bar, the system requires that I click on the green arrow to go to the url. The entrance to key doe nothing. Am I the only one having this problem?

  This problem may be caused by an extension (possibly AVG Safe Search) which does not work properly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  In Firefox 4, you can use one of them to start in the questions to troubleshoot Firefox in Safe Mode:

  • Help > restart with disabled modules
  • Hold down the SHIFT key while double-clicking the shortcut from the desktop Firefox (Windows)
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Save the distribution source for the previous version

  Hello

  I am trying to use the tool run a Labview VI in VBAI. I use LV2013 SP1 and VBAI 2013. The step run a VI Labview gives me an error saying "this step supports LV2012 or earlier. When I record to LV12, this time an error comes up saying "the VI has not been compiled for the specified remote target or it is not registered with LV12." After I read the forums and help documents, I see that this problem can be solved with the recording of the VI for distribution (LLB).

  But when I open the project, it becomes LV2013 and LLB built as LV2013. So I go back to the first step, saying: "this step supports LV2012.."

  How can I build a source like LV12 distribution using LV13? I couldn't find a solution.

  You can either download a 2012 version (ask your local sales engineer because it's an older version), or

  "Save your VI as" for 2012 and post the zip files exported to the Commission on conversion. Can someone respond and wrap your files in 2012 VI + llb ^^

  - http://forums.ni.com/t5/Version-Conversion/bd-p/VersionConversion

  -Eric

• Source for the latest HUU for server rack Cisco

  Hello, all!

  I was looking around for the latest HUU pack for my aging servers rack of Cisco.  These are the servers C210 M2 garden.  The matrix made MMIC refers to a version 14.4 (s) - which I can't find anywhere to download.  Is there a source for these packs of firmware and driver older?

  If this is not viable, a package in the range 15.X will work on one of these servers C210?  Maybe same 2.X?

  Thanks for all the research!

  Gregg

  Greg,

  Here is the link to the firmware:

  http://software.Cisco.com/download/release.html?mdfid=283862069&flowid=2...

  Here is the link for the drivers:

  http://software.Cisco.com/download/release.html?mdfid=283862069&flowid=2...

  HTH,

  -Kenny

• Configure SNMP source for the events of HW for IPMI sensors

  Us run Dell hardware and tested OMSA installed on ESXi5 hosts pointing to OpenManage (OME) Essentials for any interruptions SNMP. As indicated in the following Dell FAQ for OME the 9.5 troubleshooting section, to avoid massive amounts of alerts unknown on the server of the OME from our hosts ESXi5 we define the SNMP CIM for IPMI event source.

  http://en.community.Dell.com/TechCenter/systems-management/w/wiki/3265.OpenManage-Essentials-FAQ.aspx

  This article as well as VMware material and KB, any reference to the need to use the vSphere CLI to make this change, which of course works such as documented. Does anyone know if it is possible to make this change via PowerCLI? We do not want to use the vSphere CLI unless it's the only possible way as all the other configuration items that we have implemented kickstart or PowerCLI scripting.

  http://KB.VMware.com/kb/1008065

  http://pubs.VMware.com/vSphere-50/topic/com.VMware.vSphere.monitoring.doc_50/GUID-01D333E8-0A34-4F04-BB6C-D80A5FDA8CC5.html

  I was able to find the key value pair in PowerCLI where EnvEventSource/directions options, but I don't know if those who may be changed.

  If someone knows a way to do this, I would like to know how it is possible.

  Thank you.

  I think I knew that.  It seems that you have to connect directly to the ESXi host nothing to do with SNMP still, but if someone knows a way to avoid this, I'd love to hear it.  But this seems to work at the same time, but would need to change to more than one host at a time.

  ## Script function: Modify SNMP source for hardware events
  ## Usage: Connect to vCenter where host(s) reside, populate constants below and run
  
  ## Host to make changes to
  $strVMHost = "your_ESXi_5_host"
  
  ## Credentials for ESXi host(s)
  $strUser = "root"
  $strPassword = "your_password"
  
  ## Key to change value on (in case there are different key/value pairs you need to change in the future)
  $keySnmpEventSource = "EnvEventSource"
  
  ## New value for above key
  $valueSnmpEventSource = "sensors"
  
  ## Connect directly to VMHost in order to see the HostSnmpSystem object (http://pubs.vmware.com/vsphere-50/topic/com.vmware.wssdk.apiref.doc_50/vim.host.SnmpSystem.html)
  Connect-VIServer -Server $strVMHost -User $strUser -Password $strPassword
  
  ## Get the VMHost .NET View object and select only the HostSnmpSystem object
  $viewHost = Get-VMHost -Server $strVMHost -Name $strVMHost | Get-View -Property ConfigManager.SnmpSystem
  
  ## Get the HostSnmpSystem object
  $viewHostSnmpSystem = Get-View -Id $viewHost.ConfigManager.SnmpSystem
  
  ## Create new empty HostSnmpConfigSpec (http://pubs.vmware.com/vsphere-50/topic/com.vmware.wssdk.apiref.doc_50/vim.host.SnmpSystem.SnmpConfigSpec.html)
  $specHostSnmpConfigSpec = New-Object VMware.Vim.HostSnmpConfigSpec
  
  ## Populate newly created HostSnmpConfigSpec object with current values
  $specHostSnmpConfigSpec = $viewHostSnmpSystem.Configuration
  
  ## Modify desired value for the matching key
  ($specHostSnmpConfigSpec.Option | ?{$_.Key -eq $keySnmpEventSource}).Value = $valueSnmpEventSource
  
  ## Reconfigure the SNMP agent to take the new value
  $viewHostSnmpSystem.ReconfigureSnmpAgent($specHostSnmpConfigSpec)
  
  ## Disconnect from VMHost
  Disconnect-VIServer -Server $strVMHost -Confirm:$false
  

  Let me know if it works for your environment that we not use SNMP in ours, so I didn't do extensive testing.

• NOTE If ordering: could not able to find a source for the article ATPable

  Hi all

  I'm working on test cases where I need to activate the GOP if ATO model element. This model element is also seen point class option as well as a few a mandatory element and some optional component. Based on the selection of this option, * item will be created. I activated this CD in org1 to org2 and. I do SO the entry of the business unit belongs to the Org1.  Now, I have defined a global sourcing (enabled for all the org) for this model where transfer of org1 and transfer between org2 and is mentioned. In addition, I have created local sourcing rule in org1 than 'doing to org1' and sourcing rule in org2 and as "do to and org2. ATP is enabled for the item required org1 to org2 and. With this completed CAWC full refresh and then I tried to plan without mentioning the shipping warehouse. Here I'm note - 'couldn't be able to find a source; mention warehouse on line SO or set a sourcing rule.  Now if I quote warehouse on SO line, then planning will work perfectly.

  Believe that the GOP is not able to see overall supply rule IE 'org1 transfer' or ' transfer between org2 and. But I can work with local sourcing rule is to say 'make org1' or ' do to org2 and "if I mention warehouse on so.  so I did failed to make any other installation program in order to GOP advise me warehouse and corresponding available date?

  Please notify.

  Thank you / Dipak

  I got this answer to my own question. As we allow the GOP first, we must define certain profile options. as MRP: together for the assignment of ATP and MSC: ATP assignment together. This was missing. After you set this option to profile, it works fine.

  Dipak

• Should we use the same data source for the internal connection and Save Point?

  Hello
  
  Configuration of AM has an internal connection location db, adf - config.xml has also a Save Point db connection parameter, should we are all set to the same source database of the system or should create us a separate data source that is used only for the connection internal db AM of Save?
  
  jdev: 11.1.2.1
  
  Thank you very much!

  Hello

  its everything to you and you have security concerns if the backup point is registered with the business data.

  Frank