Nutrition on hardware plug - UX application - a way to configure or extend?

Similar Questions

• How to connect secure application programmatic way?

  Hi all

  I use JDeveloper 11.1.1.6.

  My scripts, I have user name and password I need to connect in the way programmatic request. I tried with the

  JAS JAASAuthenticationService = new JAASAuthenticationService();
  Jas.Login ("UserName", "Password");

  But it does not work. How to connect to the trusted application programmatic way?

  Thank you...

  Hi David,

  Please, download the example of this link. This example has the code of connection and explanations for any aspect

  http://www.Oracle.com/technetwork/issue-archive/2012/12-Jan/o12adf-1364748.html

  Thank you

  Sandeep

• ESXI hosts 5-2 and the best way to configure vSwitch and Nic redundancy

  Hi all

  Could someone help me find the best way to configure the vNetwork on 2 5 ESXI host for redundancy.  Once I managed to correctly configure the 2 hosts I will seek to use the same installation process for 6 guests.  3 sites with 2 hosts on each site managed all of vCentre Server

  I have 2 DL380 G7 servers 5 ESXI installed on a class 10, 8 GB SD card, I'm looking to install VSA on the 2 hosts on each server with 4 TB of internal storage (8 * 600 GB 10 k SAS).  Each server has a gigabit integrated 4-port NIC and I installed a 2nd NIC gigabit PCIe 4 ports, I also x 2 16 switches of port with Layer 3 routing.  I use vSphere 5 Standard acceleration Kit I am looking to use vCentre server for managing, vMotion for maintenance, HA for the failover and VM 10/15 (vCentre Server Std, DB SQL to vCentre Server, Exchange 2010, SQL Server 2008 R2, IIS Intranet, Helpdesk, 1 DC, 2 Domain Controller, AV Server, WSUS, SCCM Server, and Terminal Server server).

  What would be the best way to install and configure the network for performance and redundancy and am I missing something?

  My thoughts are, Teaming: -.

  vCenter - vswitch0 - port1 on NIC1 and port1 on NIC 2 - port1 on NIC1 to physical switch 1 - port1 on NIC2 to physical switch 2

  vMotion - vswitch1 - port2 on NIC1 and port2on NIC 2 - port2 on NIC1 to physical switch 1 - port2 on NIC2 to physical switch 2

  HA - vswitch3 - port3 on NIC1 and port3on NIC 2 - port3 on NIC1 physics 1 - port3 on NIC2 to physical switch 2 switch

  VM - vswitch4 - port4 on NIC1 and port4on NIC 2 - port4 on NIC1 to physical switch 1 - port4 on NIC2 to physical switch 2

  or do I need an additional NIC on each server to hit the VM 12-6 VM for 2 ports on 2 NETWORK interface card, or maybe something else I missed?

  Thank you

  In your case, to keep it simple and what I can say here is what would be my recommendation:

  3 standard vSwitches

  vSwitch0:

  • Management - vmnic0, vmnic2

  vSwitch1:

  • vMotion - vmnic1, vmnic3

  vSwitch2:

  • VM network - vmnic4, vmnic5, vmnic6, vmnic7

  The only reason why that I didn't split the VM in other network adapters shipped is because the difference in the types of the DL380 adapter shipped and the PCIe quad.

• Is there a way to configure my laptop to start automatically when it's plugged in?

  I want to make sure my laptop will automatically start the minute it is plugged. I use it a lot for work and would be handy when displaying presentations.

  Is it possible, without going through the BIOS (most old laptop - does not power options in the BIOS menu) to ensure that this happens?

  The BIOS is your only option, the operating system can't help you because it is not aware of the world until it starts.  This is what is for, the BIOS at startup of the operating system.

  BIOS is basically your only choice, but given that you don't have it, you're kind of stuck.

  Why not try the waking state?  Windows 7 has sleep very reliable performance.

• How to close the plug-in application?

  When I open an Indesign file, she prays for a plug-in that is no longer necessary. How do know so that it stops to ask?

  If the file opens, and the plugin is not really necessary, you should be able to get rid of the warning by exporting to .inx or .idml, and then open the result and save it as a new .indd.

• Error "Required application module is not configured" showed in distributed environment of EMP

  Hi Experts,

  We are trying to install and configure EMP 11.2.2.2. on an environment distributed.

  We have 3 servers,

  On a server, we installed Foundation Services and R & A.

  On server B, we have installed EPMA, planning, Manager of Calc,

  On Server C, we have installed Essbase.

  (By the way, SQL Server is on a different server)

  First we have problem deployment on application server on server B, and then we installed and deployed web applications of all the products that we use on the server has.

  After doing this Manager planning and calc were deployed to the application server on server B with success.

  EPMA web tier and the data synchronization has failed somehow, but after we manually created the server EpmaWebReports1 & EPMADataSync1 on the weblogic administration console.

  EPMA has been deployed successfully. So, up to this point, all products have been deployed, and the services can be started.

  But when launch us the workspace on a server, and then access the module planning or epma (dimension library, the library of applications... etc), error has occurred.

  It bumps a message as "Necessary application module awb.appmanager is not configured." or "Required application module awb.dimeditor is not configured."

  For more information on server A we installed on the disk, I have, and on server B, we installed on the D drive.

  We do not know if it makes no effect, we watched Installation EMP system produced in an environment distributed and have seen this:

  In a distributed environment, Oracle EPM home must be the same on each machine. For example, if the path for Oracle EPM home is/Oracle/Middleware on the first machine that you configure, it must be/Oracle/Middleware on all machines in the deployment.

  It is delicate because the estimate does not include the disk information in oracle home.

  Does anyone have an opinion on the issues that we face? Thank you very much!

  Eric

  For machines that are hosting the web application, really, it must be the same way home of middleware.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Message: application launcher - cannot load configuration

  Hello
  Whenever I start my laptop, that a message is displayed on the desktop. APPLICATION LAUNCHER: could not load the configuration. Could someone tell me what this means and how can I sort or get rid of it please?

  Thank you.

  I have never seen anything like it. Can you please give us more information?
  Which laptop model you have?
  What operating system is pre-installed it?
  Can you identify which application are part of this error message?
  Check the list of startup and try disabling unnecessary applications using. Sorry, but reading the description of your problem there is no useful information, and it is not easy to say anything.

• What is the best way to configure the Cisco IOS password?

  I'm under 15.2 (4) IOS on a router in 1921

  What is the best way to set up the password of the router?  I already tried once and managed to block me on another switch.  I would use the most secure method that encrypts the password.

  Current config:

  username admin privilege 15 password 0 cisco123

  Hey Kevin,

  Use the secret keyword instead of the password for the password more secure and encrypted.

  The syntax that you are using will display the password in clear text.

  R1 (config) #username, 0 privilege 15 password test
  R1 (config) #exi
  R1 #sh runn
  * 00:00:25.523 Mar 1: % SYS-5-CONFIG_I: configured from console by console
  R1 #sh runn | in test
  username password 0 privilege 15 test
  R1 #.

  If you use the keyword secret then it will get encrypted.

  R1 #sh runn | in test1
  username privilege 15 secret 5 test1 $1$ PV6g$ sGMYxxmW8hD9Cdy7TsmHF0
  R1 #.

  Concerning

  Knockaert

• Good way to configure "never block addresses?

  ID 4210 2.0000 S47

  PIX 515 v6.2 (2)

  What is the proper way to 'never block' a whole network in IDM?

  The network behind the firewall with a private IP address range (10.10.10.1 - 254, for example) it's NAT would have on the external interface of the PIX.

  When an of these IPs gets shunned, I can't make a 'no shun' using the address private IP and the shun is deleted. Then... I guess I can enter the private IP address to 'never block '.

  But... I did this and the IP get sometimes shunned.

  Do I need to use the global public address pool these get NAT'd to?

  Can I enter the following in the IDM to 'never block' across the network? :

  10.10.10.0

  255.255.255.0

  Tony

  The addresses that you use in the never order block on the sensor must correspond to the location where the sensor is deployed.

  If the sensor is monitoring on your private network and generates alarms with private IP addresses then use IP addresses private when you configure never block.

  If the sensor is followed on the external network and generates alarms with the global ips then use the global ips when configuring never block.

  Then look at your alarms and see what address is reported in the alarm (private or global). This is the address or network you want to configure as never to block.

  The sensor doesn't know what private ip addresses are mapped to addresses what global ip. If a block on a private address never has no effect on whether or not the sensor will block a global address.

  The Pix knows the mapping, it's why the shun no order on the Pix will remove it. The Pix knows the mapping is not the case of the probe.

  Beware that if the sensor is turned off and reboot of the sensor re - runs the command to shun for all addresses that it deems should be avoided (even those that you have run the command 'not shun' for the pix). Is not a good idea to manually run the command 'not shun' on the Pix when the IDS sensor actively manages the list of shun.

  Instead, go to IDM on the sensor and delete (delete) the shun:

  Step 11 in these instructions: http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids10/idmiev/swchap5.htm#987105

  The probe won't do then the "no shun" automatically for you.

  To configure the networks never block:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids10/idmiev/swchap3.htm#32488

  (Remember to use the network that corresponds to the period of investigation (private or global) don't appear in the alarm)

  Or use these CLI commands:

  Configure the terminal

  NetworkAccess service

  General

  never shun networks ip address 1.0.0.0 netmask 255.0.0.0

  Replace 1.0.0.0 and 255.0.0.0 with either private or global network according to what is reported in the alarm.

• ADF application error: Houston-33005: Configuration AppModuleLocal cannot be found

  Hello

  I sent my application as a library ADF JAR on one EAR [sym-creating a binding in one EAR in the CONTAINER].

  In the AppModule.xml the AppModuleLocal is configured to use a certain data source and AppModuleLocal is defined as the default Configuration.

  In my application uses the createRootApplicationModule() API (in the class of oracle.jbo.client.Configuration) like this:

  ApplicationModule amInst = Configuration.createRootApplicationModule ("model. AppModule', 'AppModuleLocal');

  Now on the run the app get the following error:

  Caused by: oracle.jbo.ConfigException: Houston-33005: Configuration AppModuleLocal cannot be found.

  at oracle.jbo.client.Configuration.getConfiguration(Configuration.java:618)

  at oracle.jbo.common.ampool.PoolMgr.loadConfiguration(PoolMgr.java:761)

  at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:591)

  at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1508)

  at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1485)

  to the view. RefreshMetricsBean.intialLoad (RefreshMetricsBean.java:384)

  Am little beat on that without a solution all day...

  Thank you

  Geni

  The still unresolved issue after the abolition of the use of the Configuration.createRootApplicationModule API.

  I Redid the entire template project.

  Useful link for refactoring of model project: https://docs.oracle.com/cd/E28271_01/web.1111/e28164/refactoring.htm#BABBCICG

  New App created with my folder structure specific app rather than the default.

  Renamed the configurations AppModuleLocal and AppModuleShared with a specific name.

  Cleaned up the request following the directions in this post: https://community.oracle.com/message/10177545#10177545

  Thanks a lot for all the help.

• Best way to configure MySQL connection scripts for hosts the remote and

  I'm curious to know if there is an effective way to do it.  I have my local MAMP server test, then a remote server, both with MySQL.  Pages requiring PHP and databases at the start with a link to my login script.  However, the connection to my local details vary my remote servers.  I have two login scripts and need to change the link of each page when I download, or have a login script and change it directly whenever I'm working between the two.

  How will people work effectively in environments the and remote?

  The login script does not have to be in your PHP pages. Not good security. It should be above the root of the Web site, where it is not accessible via http. The name of the file containing the script of the same for the remote and local, even if the content is different.

  Then your PHP pages call a file with the same name and you don't need to change anything.

  require_once '... /... / / here. Connection.php';

  Also note that the file name begins with a period that allows to hide.

• Best way to configure Photoshop workflow settings when source photos are taken in AdobeRGB, edited from a wide and output range in sRGB?

  Be able to quickly produce finished photographs is of importance with the majority of my photography work. That's why I pull, process and deliver JPEGs. There is no advantage to my clients to my shooting RAW for this time sensitive workflows. I won't be able to accommodate any possible future uses of the photos, so I shoot using the Adobe RGB color space. The output of my clients are JPEG images for use on the Web, so of sRGB. Currently, I used a screen wide gamut (NEC PA302W) with a 24-bit graphics card. (I plan on upgrading to a 30-bit card in the future).

  I noticed that in Internet Explorer, the reds in my finished photos are too intense on my screen. My photos look good in other web browsers on my screen. This situation worries me because I don't know exactly why it's happening since my pictures have embedded sRBG color profile and IE supports embedded color profiles. If anything, I think that the reds would be too intense in other applications that do not support embedded color profiles.

  Please let me know if my work flow can be improved outside shooting RAW and use a 30-bit screen:

  1. Take JPEG pictures in Adobe RGB color space
  2. Edit photos in Photoshop using range wide screen, 24-bit
  3. Color settings: colors of the monitor (Monitor RGB - PA302W, calibrated)
  4. Save for Web, convert to JPEG, incorporate the sRGB color profile

  When you work in Photoshop the reds appear very well. When registering for the Web and previewing "Color Monitor" the reds are intense, when previewing 'Internet Standard RGB (No. Color Management)' the reds appear very well. The final appearance of fine recorded images with the exception of when displayed in Internet Explorer, which supports embedded color profiles - color management.

  Shooting JPEG can certainly be beneficial for the size and speed, although with improvements in conversion raw in a few years it becomes harder to justify.  But if you expose just conversions in camera can be very beautiful.  The camera manufacturers do a decent job in their chips.

  Your sounds of workflow practices, but one thing you know may not be not is IE use NOT your monitor profile, so what you see in Internet Explorer is incorrect to 100% of the time.  He only reads the profile of your image.

  In other words, Internet Explorer is not properly managed by color, unless you have a monitor set to display accurately in the profile sRGB IEC61966 - 2.1.  Microsoft seems to have no intention to fix it either, which is a shame.

  I suggest to view your images in Firefox or Safari, who read your color monitor profile as well as the profile of the image.  Firefox can even be configured to display the elements of the web page in a mode of color management.

  -Christmas

• Application of multi-user configuration

  Hi all
  
  Is it possible to have a configuration to multiple nodes which consist of a 64-bit database server and 32 bits application server for Oracle EBS R12?
  
  Thank you!

  Is it possible to have a configuration to multiple nodes which consist of a 64-bit database server and 32 bits application server for Oracle EBS R12?

  Yes.

  Frequently asked Questions: Oracle eBusiness Suite Support on x 86-64 [ID 343917.1]
  Oracle EBS R12 with database layer single platform on the Oracle 11.2.0 database [ID 456347.1]
  Thanks to a database Oracle EBS R12 Tier one platform on Oracle 11 g 1 material [ID 762669.1]
  With the help of Oracle E-Business Suite Release 12 with a single platform of database Tier on Oracle 10 g Release 2 [ID 456197.1]

  Thank you
  Hussein

• What is the right way to configure logging in WebLogic 10 for my EJB?

  We rotated WebLogic Server for some time. We have a file with two jars in there ear. The ear file consists of two jar files. Each jar file, in addition to having our class files, has a log4j.properties file configured correctly in it. However, when our code tries to connect, we get:
  
  log4j: WARN no appenders could be found for logger (com.armanta.util.Properties).
  
  log4j: WARN Please initialize log4j correctly system.
  
  And unfortunately, we don't see any of our record output. Exactly the same Setup worked well under WebLogic 9, then something changed. I'm ok with the change, but please tell me how to make this work correctly now. I tried a number of things, including the replacement with a log4j.xml log4j.properties.
  
  Thank you

  Hello

  WebLogic Server by default don't use log4j.
  For an example of using log4j with WLS, see BEA documentation:
  Link: [http://e-docs.bea.com/wls/docs100/medrec_tutorials/standalone.html#wp1059001]

  The message you see means that Log4j does not have a default logging target. You must ensure that all classes can inherit an appender. This can be achieved by attaching an appender to the root category.

  The following link explains how to attach an appender to your application
  http://www.ONJava.com/pub/a/ONJava/2002/08/07/log4j.HTML?page=2

  Hope this helps :)

  Kind regards.

• What is the easiest way to configure my Xbox 360

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi devinmmmmm,

  See the section Configure a Xbox 360 console (or other device) as an Extender to set up the Xbox.
  See also the configuration of your Xbox 360

  I hope this helps.

  Visit our Microsoft answers feedback Forum and let us know what you think.