Open the other projects - does not work

Similar Questions

• Context menu (including all the other menus) does not work after a while.

  I use ubuntu 12.04 LTS, 33.0 firefox (thunderbird also same problem).

  Context menu and all menus are not works after a while (maybe 30 min)?

  I have to close all firefox windows to make the menus work (make an another new firefox windows does not solve problem)

  The problem this menu would not be displayed (menu popup and also normal menus) have not been reproduced approximately 2 days.

  I have not try your solution because I had planned to try your solution after I encounter the problem again.

  Only difference when I got problems with menu meets it is that I ran firefox from terminal invites no task bar of the unit...
  (I expect to capture some bad newspapers of the terminal prompt when I encounterd new menu problem)

  Maybe it takes other hours or days before I met the new problem or there is a possibility that I could not this problem again until I do some changes (restart firefox from unity...)

• make an an area smaller than the entire project does not work

  I recently installed 8 PE and converted from the original version of PE3 a project which is about 1 hour 40 minutes. I want to burn to a DVD and added some finishing touches.  Everything was fine, except that the entire project had a red line, so I decided to make the project (I couldn't see much if anything) which I did, and it took more than two days is more slower!  (35 video clips and 123715 images) OK, it finally finished so I saved the project.  Look at one was much better, if it's not perfect, but watchable.  So, back to the disk space, I deleted rendering files. Imagine my surprise when as soon as I did the red line is back, and intolerable listening to the edit mode.  The impression I got from PE8 help is that you could remove render after render files, as their goal had been finshed. I can't wait 2 days, so to accelerated rendering, I thought I would in small pieces, say 5 minutes each.  But even if I change the area of the workspace such as defined by the gray bar, (grabbing the end and drag it to a much smaller size - to the beginning of the project for example |) it begins to make the entire project again! what I am doing wrong?

  What you're looking for is the Windows address book (WAB, work area Bar). You can then assign the share of exports/only the area work for most export formats. Don't forget to do. It is usually with a drop-down menu, or a checkbox.

  

  Good luck

  Hunt

• Drag-and - drop text reader to the other application does not work

  Hello

  I have disabled protected mode in acrobat reader of the registry key... HKCU\Software\Adobe\Acrobat Reader\11.0\Privileged\bProtectedMode REG_DWORD 0

  This works when Acrobat Reader native app is used. When I open a PDF file in the browser (Acrobat Reader Plugin for IE11) then drag / drop do not work. Select, right click copy, destination Application as Word 2013 right click Paste, works.

  We use 11.0.12. Same problem was 11.0.11 too.

  Any ideas?

  Kind regards

  Roland

  Hi supports,

  Web browser uses only the PDF viewer plugin to view PDF files. It will have the same feature of the player.

  So if you want to use the drag & drop feature, please stick to the player application.

  Kind regards
  Nicos

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• The top of page 1 1/4 inch has no answer whin you click on it. As in this page, sign in or register and other app does not work. in English

  The top of page 1 1/4 inch has no response when you click it. As in this page, sign in or register and other app does not work. in English

  This problem can be caused by that extended the Yahoo! toolbar or extension of Babylon also well down and covers the top of the browser window and therefore links and buttons in this part of the screen not clickable.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• Re Windows XP: At the opening of the hearts, the window is very small. How can I increase the window to fill the screen. Double click on the top panel does not work.

  Re Windows XP: At the opening of the hearts, the window is very small.   How can I increase the window to fill the screen.   Double click on the top panel does not work.

  Hi Rosa,.

  The size of the window for Hearts is actually design in Windows XP.

  However, there is a solution. You can follow these steps:

  
  Step 1

  a. first of all, copy the game.

  b. click Start, all programs, games.

  c. right-click on the game of hearts .

  d. Select Properties from the list.

  e. press the button find the target on the next window.

  f. right click on the highlighted file and select copy.

  g. then paste the copy on your desktop.

  h. right click on your desktop.

  i. Select Paste from the list.

  Step 2

  Finally, we will change the resolution for the game setting:

  a. right click on the game you just pasted on your desktop.

  b. Select Properties from the list and click the Compatibility tab.

  c. put the check box marked "run in 640 x 480 screen resolution.

  d. now whenever you want to play, click on that game on your desktop and it opens in mode full screen using the widest possible cards and numbers.

  Hope the helps of information.

• Right-click the folder or any other function does not work, and I don't have a sticky key...

  Right-click the folder or any other function does not work, and I don't have a sticky key...

  While I click right click in windows Explorer has stopped working... Help, please!
  

  A Virus Scan. Your PC can be infected. If you have not installed it, use MS Security Essentials if you have a genuine Version of Windows. It's free.

• I have Adobe Lightroom installed on 2 computers. One works perfectly. On the other machine, the adjustment brush does not work.

  I have Adobe Lightroom installed on 2 computers. 1 works perfectly. On the other machine, the adjustment brush does not work. You can hear the fans in the Gallery of the computer up as if he is trying to work. All the other features do not work. I uninstalled and reinstalled Lightroom cc, but this does not solve the problem. Both computers are running windows 7 Professional 64-bit

  Hi Marc,

  Suggest you to reset preferences in Lightroom and then check out.

  Refer to this article: to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

  Kind regards

  Claes

• How to copy and paste into the search engine does not work?

  How to copy and paste into the search engine does not work?

  It should be.

  Restart your Mac and try again.

  Other than that, make sure that OS X is updated.

  Open the App Store, and then select the updates menu.

• Urgent - the sound recorder does NOT work after getting the window system 7 (64-bit)

  I have a problem with the sound recorder. After that I got the system with Windows 7 (64-bit), the sound recorder does not work. It's very urgent because I need to procticing my English pronunciation and the test day is coming.

  Please would you give me help? I really appreciate!

  Thank you very much.

  Eleanor

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volumn to check the next time that the system restarts,
  Enter: y

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  ========================================================================

  Run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  J W Stuart: http://www.pagestart.com

• "The cutting tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon.

  The error message "the snipping tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon.  However if I select snipping tool in the menu start nothing happens at all.

  Original legislative:

  M.

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• volume and the touch screen does not work

  good so we got our a Vulcan mod VTA1005XBM32. Will be that she locked her self so we had reset his tab/pc, but know its volume and the touch screen does not work. see some convo saying to download something, but I don't really know what to look for. Help, please... Thank you Dorothy

  OT:

  my / Tablet PC

  Dorothy salvation,

  Thanks for posting your query in Microsoft Community.

  I don't understand that the volume and the touch screen does not work and I'll be happy to answer your query. These features require the updated drivers for them work. Let me ask you;

  • When was the last time that the two have worked?
  • Remember to no particular change in the device before the show?
  • Since the touch screen does not work, you are able to use the options settings?

  The device requires the updated drivers for the volume and the touch screen. I suggest to follow the methods below and check.

  Method 1: Run the troubleshooter of material and check if that helps.

  a. type in the right edge of the screen, and then click Search.
  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)

  b. enter Troubleshooting in the search box, type or click Troubleshooting, and then press or click on hardware and sound.

  c. press or click on hardware and devicesand follow the instructions on the screen. You may be prompted for an administrator password or to confirm your choice.

  Method 2: Update the drivers

  Step 1: Update the driver through Device Manager

  a. press the Windows key + X , and then click Device Manager

  b. expand driver Sound

  c. make a right click driver, and then click Update driver software

  Step 2: Install the Windows updates pending

  To check the updates:

  1. Open Windows Update by hitting on any fly in the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), tapping or clicking on settings, tapping or clicking change PC settingsand then by typing or clicking on update and recovery.

  2. Press or click check nowand then wait while Windows searches the latest updates for your PC.

  3. If updates are found, tap or click install updates.

     Read and accept the terms of the license and then press or click Finish if the update requires it.

  4. Restart the computer for the updates to be applied.

  Step 3: Visit the website of the manufacturer of the device support and install the latest drivers for the sound and touch to Windows 8 for the same model of aircraft.

  You can also check: touch and pen settings: FAQ

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• The CD/DVD does not work with El Capitan 10.11.5 on Macbook Pro

  Hello everyone, I spent the time to research on the here and the other site on why the CD/DVD does not work with El Capitan 10.11.5 on MacBook Pro mid 2009. This discussion forum has said that he will not work with the El Capitan software. Any idea or suggestion? Back to Marverick or Yosemite? I tried to use SMC reset, restart, recovery and still the same issue.

  I thank in advance.

  ~ Mike

  I have my doubts that the (10.11.5) software is the problem.  Are you sure that the DVD player is simply not defective?  Have you tried to clean the lens?  What is the State of the disc?

  Your best option may be a date at a bar in engineering of the Apple store for a FREE evaluation.

  Ciao.

• Firefox automatically updated itself, would not add new bookmarks, then deleted all mine, will not always add new, now the back button does not work. I'm Livid.

  I think I'm on Firefox 13.0. He put itself as part of the update of my computer up to date (at least I guess that's what happened, because it has changed). I noticed yesterday that he would not favorite Web sites, but I thought it was just the website or bookmarks have been full-time or something. Today, I tried to remove a few bookmarks to make more, but they would not remove. I tried to register a new site, and it wouldn't work. I tried to close/exit firefox and re-opening of the program. While the program was closed, I installed the next set of updates on my computer. When I have opened firefox, all my favorites, and the tab menu (or what you call personal small bar on the actual tabs) were gone. I can't always favorite of new sites, so I can't even re-do all my favorites (and I got a lot, all of them arranged so it's a big loss and incredibly annoying). Then I realized that the back button does not work. And the cursor remains on the typing that I symbol, it does not change the arrow, when I click on a link.

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can also try to repair the database of places with this extension:

  • https://addons.Mozilla.org/firefox/addon/places-maintenance/