Passage of the battery 4 cells to the 6-cell battery

Similar Questions

• Wheel rotation during the passage of the apps

  Hello

  I frequently meet the spinning wheel during the passage of the apps. For example an app can do one, but open window have not been used for a while and then when I click on the window to use it I get the wheel spinning for a few seconds.

  I am running Yosemite 10.10.5 on a MacPro Mid 2010) with 16 GB of ram and 12 GB available on the 300 GB SSD drive. I just realized that maybe space on the boot drive may be the cause, so I'll empty now and update if there is no change.

  Also, my SSD is a 500 GB Samsung SSD 840 EVO media and I think that the TRIM is not enabled? I read that TRIM was not based with SSDS of third party on my machine and was picking up information contradictory as to the time it was a problem or not. The lack of TRIM could be the cause of the spinning wheel?

  Duane

  You ran a 'cleaning', 'optimize' or 'speed up' apps on your Mac?  Have you installed an antivirus software?

  The 12 GB of free space must be sufficient and not to be the cause of the problem. Don't let him get any small however.

  

• Mac Pro is not displayed after the passage of the screens

  OK, so this is a strange problem but it's very annoying (at least for me). I just bought a LG Ultrawide 29 "display and connected via a HDMI cable to my Mac Pro (Home machine) and a second HDMI cable to my Macbook Pro (desktop computer). The Mac pro / Macbook pro good work with the big screen, HOWEVER, when I use my Mac pro and select the tilt of the screen to switch to the HDMI 2 connection, it works and rocking on my Macbook pro. But when I try to switch it back to HDMI 1 (Mac Pro), it comes back with a black screen and says no signal. Even if I plug the HDMI cable it does not work. I set the timer to 3 hours sleep, doesn't always help. I know he's not missing sleep because itunes can be played when I spend and still playing music throughout and continued when I try to switch back. The only way I could get is long, press the button on my Mac Pro and restart.

  The only reasonable difference that I know is that the Macbook pro is running Yosemites, while my Mac Pro running Beta El Capitan. I have a feeling, this is probably the cause, but I just wanted to know if someone has solved this problem somehow.

  Thank you

  Hello Hemlock70,

  Thank you for using communities of Apple Support.

  I understand that your external screen remains completely black, with a message no signal, during the passage of the views.  For assistance with this problem, please go through the steps in the link provided below.

  Get help with graphical problems on external displays connected to your Mac.

  Take care.

• I tried to install 300 photos on a USB I installed 170 photos and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  I tried to install 300 photos on a USB I installed 170 photos and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  Hi BrendaMay,

  Take a look at this link http://social.technet.microsoft.com/Forums/en/itprovistasetup/thread/bf17ed76-5164-4380-9140-16bd74e7c8c7 and check if the post by Ira Horowitz to Monday, December 24, 2007 15:04 is a good one to try.

  Kind regards

  SAP

• I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  Hello BrendaMay,

  ·         What exactly do you mean by saying that you install photos?

  ·         You try to copy photos from your computer to the USB key?

  Try to format the hard disk to the NTFS Format USB and check if you can copy the photos.

  If does not work, try to format to FAT32.
  1. type devicemgmt.msc in the Vista Start menu or in the Run dialog box.

  2 expand disk drives, right-click on your USB key that you want to format it in NTFS file system, and then select Properties.

  3. on the Policy tab, select optimize for performance option. Click OK and return to my computer.

  4. right click on your key USB. Select Format.

  5. Select NTFS from the drop-down list (you can also select FAT32).

  6. click on apply to format your drive to NTFS.

  Note: The pilot of formatting will destroy all data on the disk.

  If this does not work, try to create a new folder in the drive, and then copy the photos on this folder.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• HP LaserJet Enterprise 600 m602 slow printing during the passage of the trays

  Hello world!

  On the HP LaserJet Enterprise 600 m602, who met breaks in print jobs during the passage of the trays?  Example, we are going to print invoices and we have a rule configuration that prints on plate 2 with the exception of the last page that is perforated paper tray 3.  So, in a job of 5 pages, pages 1-4 are the tray 2 paper... then page 5 is perforated tray 3.  There is a 2 to 3 seconds when the last page is extracted from tray 3.  If the invoice is only 2 pages, the print job appears super slow.

  This printer was working fine with no delay until we applied the firmware 2302786_433718.  Now, the delay is very noticeable.  We do not know if it was intentional or not in the new firmware.

  We use the latest PCL 5 Universal Print Driver.  The only thing that has changed is the firmware.  We even tried a full reset of firmware.  Problem is still there.

  I worked with HP support, but we were told to wait... the next version of firmware that may or may not fix everything.

  Any help or insight is appreciated.

  We have this same problem with our printer HP Laserjet 600 M602.

  Could solve by setting the Print Mode to all papertypes that are used for the same parameter.  We thought initially can be a problem, issue or firmware of the Board of adjustment, but in reality was the paper type settings. We set up printer for ordinary paper into tray 2 and tray 3, default regular bond has been set at light mode printing and binding for the print mode binding. Each time dial-up printer and trays, he stops to configure different paper type settings.

  Hopefully the other help solve their printing problems

  Enjoy your day,

• Competitor not starting not not to DR after passage in the

  Hello

  We have successfully configured recovery disaster for 11i ebs on windows environment.

  Redo log shipping and applying normally and its working fine.

  After the passage of the primary on the eve, we synchronized with the new primary database application services.

  But while watching the concurrent managers, we are facing questions.

  In the concurrent Manager log as its display error

  Could not contact Service Manager FNDSM_ORACLEAP_HRDR. The TNS alias could not be located, the listening on ORACLEAP process could not be contacted or the listener cannot generate the process from the Service Manager.

  Could not contact Service Manager FNDSM_ORACLEAP_HRDR. The TNS alias could not be located, the listening on ORACLEDB process could not be contacted or the listener cannot generate the process from the Service Manager.

  We have made the steps below but make even persistent.

  (1) connect apps/primaryapps

  (2) exec FND_CONC_CLONE. SETUP_CLEAN;

  (3) validation;

  (4) run cmclean.sql

  (5) run on nodes DB, CM & WEB autoconfig.

  (6) run @%FND_TOP%\patch\115\sql\afdcm037.sql sccripts also.

  (7) we have correct host entries in the system hosts file.

  Kindly help me to solve this problem.

  
  

  Thanks and greetings

  Villi Kumar

  Hello

  The problem is solved now concurrent Manager is up and running after the digital switchover.

  Solution:

  After the passage of the database:

  ------------------------------------------

  Complete the Configuration of database:

  ----------------------------------------

  connect the apps/primaryapps

  SQL > exec fnd_net_services.remove_system ('HRDR');

  SQL > commit;

  SQL > exec fnd_conc_clone.setup_clean;

  run the automatic configuration on db

  lsnrctl stop STHRDR

  lsnrctl start STHRDR

  Synchronization of the application:

  -------------------------------

  disable the listener applcaiton both on the odes before running the automatic configuration.

  Run the autoconfiguration on cm node service

  Run the autoconfig on the node of the Web

  Check the node values using query below:

  ----------------------------------------------------

  Select nodeName in fnd_nodes;

  Select CONCURRENT_QUEUE_NAME from FND_CONCURRENT_QUEUES where CONCURRENT_QUEUE_NAME like '% FNDSM'; ---> to the result of the query, for me web node hostname only came so I ran script below.

  @%FND_TOP%\patch\115\sql\afdcm037.sql ---> this script updates the table with the details of the cm node

  now, it seems very well.

  Select CONCURRENT_QUEUE_NAME in the FND_CONCURRENT_QUEUES where CONCURRENT_QUEUE_NAME like '% FNDSM ';

  Then restart all servers.

  Now start the database and applications.

  Problem will solve itself.

  Concerning

  Villi Kumar

• Hi, I have adobe creative cloud and a Macbook. I want to the passage of the mouse to pen. Any recommendations?

  Hi, I have adobe creative cloud and a Macbook. I want to the passage of the mouse to pen. Any recommendations?

  The best solution is to buy a wacom tablet, go wrong with breakfast as the draw Intuos | Wacom , Intuos Photo | Wacom or the Art of Intuos | Wacom this way you cn get used to it.

• CC in Lightroom on Windows 10 crashes during the passage of the library to develop.

  Everyone has a problem with Frost during the passage of the library to develop modules in Lightroom on Windows 10 CC?

  Hi mgmagney,

  This could be because of the graphics processor.

  Go to the Lightroom preferences > performance > uncheck 'use the graphics processor' > restart Lightroom, and then check out.

  Kind regards

  Claes

• Larger images Popup during the passage of the mouse on the photos (was: in Dreamweaver CC 2015...)

  I have thumbnails that I would have larger popup on the passage of the mouse. Can't do it in any way. Any help?

  Here is an example usage of CSS3 transform:

  div #socialmedia a {img:hover
  -webkit-transform: scale (1.3);
  Transform:scale (1.3);
  -ms - transform:scale (1.3);
  }

• How to make a passage from the mouse inactive before a click?

  Hello

  IM new at this request, but I like it a lot!

  My question is how to activate a button with a 'click' or any other action that is the only thing before for example a passage of the mouse becomes active? I would like to make this infographic that gives you the ability to click a button, then a rectangle is displayed, then you hover over the rectangle and the text appears.

  Thanks in advance

  Casper

  I would use animate() for mouseenter and mouseleave events.

  Example here:

  Dropbox - double action btn.zip

• Can I use the SQL function while setting of passage in the links?

  4.2.1
  
  Hello
  
  I have a report that is a hypertext link (using the column binding feature standard apex) to another page. One of the parameters (columns) I spend is a varchar column with & values. Now, there is a restriction on the passage, & in the apex in 4.2.1. I was wondering if we can use something as a replacement (COLUMN1 # #, ' & ','-')) in the connection settings?
  
  Unfortunately, the column does not have an equivalent id that can be used.
  
  All of the suggestions.
  
  Thank you
  Ryan

  ryansun wrote:
  4.2.1

  Hello

  I have a report that is a hypertext link (using the column binding feature standard apex) to another page. One of the parameters (columns) I spend is a varchar column with & values. Now, there is a restriction on passage and in the apex in 4.2.1. I was wondering if we can use something like a replace(#COLUMN1#,'&','-')) in the connection settings?

  Unfortunately, the column does not have an equivalent id that can be used.

  All of the suggestions.

  Thank you
  Ryan

  You can create another field in your query that might contain the value "prepared" - you set this to be a hidden column in the report definition and use it in the URL.

• the length of a passage from the mouse detection

  This seems a simple scenario, apologies if its already been posted, but I can't find anything on the research.
  
  I have a button that triggers an action on the passage of the mouse, I need to detect how long the users mouse is over the button and only trigger the action when the mouse has stayed more for 1 second.
  
  Any help would be greatly appreciated!

  :

• The passage to the line/column in the ListBox with enter/tab?

  I have a ListBox, in which I load several columns, ranks multiple excel files. Once I've selected a single cell to motify it, I would move down to the next line to the right or to the left / to the next column with the enter and tab keys respectively? It would be especially nice to be able to move to the next cell with it being active, so that I can make changes without touching the mouse pointer.

  Is it possible to do?

  LV2014

• How can I see where the letters are on the keyboard after the passage for the french, Spanish or German

  I use a standard keyboard, but write in Spanish, German and French and English. How can I see a Visual of the key Governing Council after the passage of languages so I know where the special keys are for each language?

  Tuesday, July 17, 2012 17:42:37 + 0000, DavidSouthard wrote:

  I use a standard keyboard, but write in Spanish, German and French and English. How can I see a Visual of the key Governing Council after the passage of languages so I know where the special keys are for each language?

  If I were you, I would not go to all languages. You can get all the
  These special letters on the English keyboard with the help of a third party
  program. I use a program background small freeware called AllChars.
  This allows me (in all applications, type many common special characters
  (many of them are used in other languages) by pressing the key ctrl
  followed by a combination of two-character mnemonics.

  For example, for n the two characters are ~ and n. "C is for c, and, for u, you and.

  To get it, go to http://allchars.zwolnet.com/

  Ken Blake, Microsoft MVP