Please help me I am DESPERATE!

Similar Questions

• Please help me. My task manager disappeared, also run the command

  I have automatic updated my computer this morning. After the update, I had to reboot my computer. After the reboot, my task manager disappeared, I received a message that it is disabled by the administrator. The thing is, I am the administrator. I tried to bring it using command run, but he went too. I tried the command run in the properties of the start menu, impossible to find. How can I bring back?

  Another thing, all my word files are now listed as files Visual Basic EDITOR. I guess it's because of virus. I turned off to avoid any automated scripts from script virus running, but then I can't open any word file, so I still allowed him. I can open word file after that, but they are still reported VBEfile. What is VBEfile anyway?

  Another problem, the automated system recovery tab is also missing from my computer properties after the update.

  Please help me, I'm desperate here.

  If you see things like this:

  You do not have sufficient security privileges to restore your system.
  The System Restore tab is missing from the my computer properties.
  System Restore has been disabled by group policy.  To turn on system restore, contact your domain administrator.
  The System Restore tab is available, but the turn off System Restore (disabled by Group Policy) box is grayed out.
  The task manager has been disabled by your system administrator.
  The registry editor has been disabled by your system administrator.
  The task manager has been disabled by group policy.
  The registry editor has been disabled by group policy.
  The command prompt has been disabled by your administrator.  Press a key to continue...
  The operation has been cancelled due to restrictions in effect on this computer.  Please contact your system administrator.
  The "Run" option is missing from the start menu.
  The option "Log off."... ' is missing from the Start Menu.

  The usual advice are something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor, because there is no Group Policy Editor in XP Home and that really doesn't tell you where to look in group policy, even if you run the Group Policy Editor.

  You need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines in bold text in the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem).

  Because now you have or have had a malware infection, I would follow with this:

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Could not use brush history because the State of the story doesn't have a corresponding channel Please HELP CS6

  Whenever I try to use my history brush, the error pops up and I have no idea why. If I try just to open a blank document and use the brush it does not give me this error and I can 'use' the brush, but nothing is displayed on the project. Anyway, so when this error happens im trying to do a project and say I put a leader (picture) in the project and it's the first thing I do. I place, then I sized the image down some. I'm then a new layer to use the brush to behind the image and then that's when I get the error. I have no idea what is wrong can someone please help me I'm desperate: (.)

  It drove me crazy too and I couldn't find anything on the Net or in all the tutorials on the Adobe site. The solution I found is extremely obscure - it seems that it is essential when you take the snapshot for the layer of story that you do not choose the default option in the snapshot dialog box that appears to allow you to name the snapshot. In this dialog box, use a "Comprehensive Document", instead, click on the arrow to select the option below that is 'Merged layers', then it worked like a charm. Good luck!

• Problem with clips nested, please help!

  Help, please!
  
  I have a movieclip symbol, let's say, a ball that bounces with a stop(); action on frame 14.
  
  And I have another movieclip symbol which has a text that cross the screen with a stop(); action on the frame of 10.
  
  The main time line, I would like to that ball to start bouncing on frame 2 and stop frame 15, so I placed it on its own layer with a keyframe on frame 2.
  
  I want, the symbol of the text to start on frame 6 and stop on frame 15 also, so I placed it on its own layer with a keyframe on frame 6.
  
  It does not work.
  
  When I play it back, the Visual jump wildly back and forth between the symbols.
  
  What should I do?
  
  I work in Adobe Flash CS3. ActionScript 3.0, 30 frames per second, Player 9 (not sure if this is relevant, but just in case).
  
  Please help me, I'm desperate, I can't understand it.
  
  Thank you!

  Hello

  I'm so clear with what you're saying...

  You have a movieclip that has its own animation of scenario of a bouncing ball and it stop on chassis 14? Even with text movieclip - he has his own animation of script for simple horizontal interpolation that ends on the frame of 10?
  And you placed these clips on the stage, put them on their own layers and moved the mc of ball to frame 2 and the text in the box 6 mc?

  Are there blank keyframes before the frame 2 on image 6 of the text layer and layer of ball? If not, then select frame 1 layer on the ball and press F7 to make an empty keyframe. Do the same on the text layer but select images 1-5 and click F7 to make them blank keyframes.
  What you don't want to do, is show the movieclip before the beginning of their animation. Therefore, you get the wild flashing.

  Also extended these layers to frame of 15 images? Otherwise, click on frame 15 (for the two layers) and press F5 to add frames.

  And you order stop() on plot of 15? Otherwise, create a new layer, call it actions and put a stop() on frame 15 command.

  Sure that your movie will play correctly now.

  NOTE: Just out of curiosity - why don't simply animate you everything on the main timeline?

• Mother's day my end desperate to access the emails/photos - Please HELP

  Hotmail blocked me from my email account - I gave them all the information that I can remember and yet they claim that this is not my account - I have emails from my mother just expired that I want so desperately - CAN ANYONE please help?

  I gave them so much information as the Dates & topics of emails I've sent to and from my late mother, emails that I have received and answered.

  I keep all stall on name all the folders I had.

  Really, I'm round and round in circles so frustrating and upsetting to not being able to read/see my e-mail from mothers end and photos.

  So it's been underway since April 2011 neary 3-4 months

  I hope someone can help

  Thank you very much

  Priya

  For problems with Hotmail, you can ask in the relevant forum here: www.windowslivehelp.com

  If you mother used Outlook Express, then you could open and see what's in the message store already.

  Steve

• (Dell) Windows 7 Home Prem OA: Please HELP! Windows is loading files.

  To the right,.
  Since my brother was playing around with my computer and play Minecraft, I got a screen that says: "Windows loading files. I tried almost everything, and I'm desperate. I watched a lot of things that still doesn't work. Repeativly F8 at startup, F10, F12 and nothing. The thing is, whenever I have turn the computer back on, there is no commissioning. The screen will appear just by these words: "Windows is loading files," and a white bar at the bottom. I see no symbol start like HP or DELL. I see no screen connection. I tried unplugging and reconnecting TAB, CTR, ALT, DELETE, put highlighted with arrows keys and down and clicking on ENTER. EVERYTHING. He has also been disconnected from the internet for several months and I can't use the disc slot.

  I have also all my photos, songs, videos, work, life and data on this computer. I NEED A WAY TO REPAIR THIS COMPUTER WITHOUT LOSING ALL MY STUFF! Please, please, please help!
  Thank you!

  Since your computer laptop is a Dell, I highly recommend going to Dell Community support.

  It's the HP product HP consumer support forum.

  http://en.community.Dell.com/support-forums/

• ERROR 0 X 80240009 PLEASE HELP

  error 0 x 80240009 Please HELP

  Hey,.

  I am running VISTA HOME PREMIUM 32-bit (SP 1 is installed) and I always had problems with windows update. I wanted to install service

  Pack 2 a long time ago, but it has not been successful - by saying that the system was not ready for it, and as he told me I went to the UPDATE of the SYSTEM

  PREPARATION TOOL (KB947821)... and I ran, and it showed: press OK TO INSTALL HOTFIX for WINDOWS KB947821, when ok is

  clicked, after about 5 seconds, an error saying: ERROR 0 x 80240009! now, I'm desperate to install SP2 that some applications require! PLEASE

   

  Help!

  Véronique, INDIA (16 yrs) (I swear I want to join microsoft one day!)

  Hi SakethS,

  Step 1:

  Try to solve this problem with boot.

  See the following Microsoft KB article:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Restart your computer and let any other window update of full operation.

  Step 2:

  This see below article provided Windows Help and search for the question.

  How to reset the Windows Update components?
  http://support.Microsoft.com/default.aspx/KB/971058

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Please help computer does not start!

  Hello, I need desperate help! When I try to start my computer, it starts work and then comes to the screen below. I tried to start it in safe mode and others, but this screen keeps coming back. Please help, how can I get rid of him?  The screen is bright blue with white writing and said.  A problem has been detected a windows has shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME so he says a lot of stuff on the verification of the material and at the bottom it said technical information: * STOP: 0x000000ED (0x89D35900, 0x00000000, 0xC000009C, 0x00000000) Please help me! I can't get my computer to start so I have a lot of data out there I'm desperate to get. Thanks, kate

  Hi KateStapleton,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  See the Microsoft article below and try the steps mentioned, check if it helps.

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

  http://support.Microsoft.com/kb/297185

• Please help have installed some updates and now the laptop won't restart

  Please help I have installed the updates windows asked what I do, restasrted my laptopp and now it won, t start up. It's show on a black screen! 0xc01a001d! 29371/56275(\Registry\machine\Schema\wcm://Microsoft...) I turned off I tried to leave again in safe mode and last good configuration and it is right on the same scene. feeling pretty desperate now any help please ASAP would be greatly appreciated TO

  my laptop is a SONY Vaio and it runs on Windows Vista Business

  Hello

  Try this

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If that does not resolve you would like to repost in the forum update of windows for the best help with this issue of update

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1

• Please help - all is lost on my profile

  my computer crashed this morning by searching on google.

  When it has been restarted, he loaded a new profile, indicating that "your user profile was not loaded correctly, you have been logged on with temporary t profile, all profile information will be lost.

  I'm interested to know, if my old user profile is gone for good, or if there are ways to find again? It is on this profile, I've kept all the emails, photos etc etc... and if they are lost, I'll certainly scream!

  Please help someone! ?? I'm desperate!

  Hello

  Your data should stay there and accessible from your account once it is restored, or any
  ADMIN account. It will be under the old username C:\Users\"Your"------where C: is the drive.
  where your profiles are stored.

  Read and use this 1:

  A temporary profile is loaded after you connect to a Windows Vista-based system
  http://support.Microsoft.com/kb/947242

  -----------------------------------------------

  If you have other questions, try these methods:

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• BlackBerry Smartphones please please please help!

  Subject: RIM_bca28a80-e9c0 - 11 d 1-87fe-00600811c6a2

  This message is used to carry data between your BlackBerry handheld and

  a home server. Please do not remove, move or respond to this

  message - it will be processed by the server.

  BEGINETP 108

  Aa8qmVMAAAAAIBAIMzFBNTZENjIgEXRvdWNobTU4NUBhb2wuY29tAEzgTLJQBUNNSU1FA0CA

  gICAMgAAMEMzOTQ4NDg3K0crMQBF1Vq9sqFTgTCuCe0f2PSoABlC77CHRdYBGxfQR0X6fE4G

  ENDETP-1416855863

  I get that 50 - 100 times a day. Its driving me crazy. Any help will be greatly appreciated. I tried to wipe the handheld computer to replace the phone. I'm not addicted in a server business, but for some reason, he thinks that my aol email is connected to one. I have no book service bureau in the phone.

  I have contacted my carriers tech support but have been unsuccessful so far.

  I understand that this error message is related to a company server - so my question is how to stop?

  All the steps on the website do not work because I do not have books of service office or ever be put on a company server.

  Please help, I'm desperate. I'm willing to interrupt the e-mail account, but I want it as a final last step.

  Well after months of torture, we have a cure. I had to have my I.T dept a disturbance of the record and after hours of troubleshooting over the phone... We contacted R.I.M and they had me wipe my blackberry pearl original to see if it worked and it didn't... but ppl @ R.I.M proposed to create a filter in my email inbox and send just directly to the trash. So that was my landline. Why didn't think of this!

  Thanks for all the comments!

• 'Renew your membership'. Trying to renew my subscription is Sabine at this stage. Please help me!

  I am a student at a University and I am unable to redeem my creative cloud Adobe for ETLA (Multilanguage) - with my Redemption Code. Whenever I enter the code that an error message appears indicating "Oops!" This code has already been used. "I tried to download the free trial version in the hope to have access to one of my Adobe software applications, but an error message keeps popping up that says"renew your subscription. "Trying to renew my subscription is desperate at this point. Please help me!

  Please check the private message, I shared information at this location.

• I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  You can use it with your TV.

• I am tryng to buying music on itunes, but it says security code wrong please help

  Hello

  I have problems I want tp purchase music on my itunes bt ts always requires the security code that I don't have it please help

  Check your card information. If they are correct, try to change or remove your Apple ID - Apple Support payment information

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?