Question about IO on A2109 IdeaPad Ports

Similar Questions

• Question about the migration to a new vswitch NFS port group

  We currently have our group of NFS port on the vSwitch that has all our VLAN and I'd like to bring out a vSwitch isolated dedicated network cards that will handle only NFS communnication.

  I have two network cards additional that I configured on an another vSwitch.  My question is can I remove the port from a vSwitch group and add it to this new and expect it to work?  This unmount and mount the NFS volume for me?  It will be just a quick blip?  What is a larger company?  I ask because I'm trying to figure if I need power off all the virtual machines that are on NFS before moving the port group.

  Is there another method that I should follow to do what I'm doing?

  Thank you

  t

  You'll need plan a failure.  You will need to create a new portgroup vmkernel, since you can't really "moving" a portgroup.  In addition, since you must create a vmkernel portgroup, it cannot be on the same subnet as the existing vmkernel portgroup.  You can have two on the same subnet, no matter how vSwitch' are you have.  Also, I'm not 100% sure the NFS, when you go back, to be assigned a new ID and be recognized as a new data store and force you to re-register your vm.  It's pretty easy to do, but it may be necessary.

  -KjB

  VMware vExpert

• Many questions about the HP 50 g

  I just ordered a HP 50 g graphic calculator! I have a few questions about this so hang on tight! What is the USB connector on the calculator? Mini-USB, micro USB, or is it a connector owner, "custom". Then, it would be possible to connect a keyboard to the HP 50 g by using the USB Port? Is there a program that would make this possible? (I doubt it would work if you plug it..) I have a Mini-USB to female USB 2.0 connector. So I could just plug the keyboard right, provided that the port on the calculator is a Mini-USB Port. If this is not so that I could use my female to female USB adaptor to connect the keyboard.

  Thanks for your help,

  Zekelegge

  Hi!, zekelegge:

  Welcome to Forum!

  The only printer I use, 50G calculators, 48GII, 39GS and 17BII +, as well as many former models, such as the 48 s/SX/G/G + / GX, 38 G, 39 G, 42, 41 C/CV/CX and 28 C/S, is the infrared printer HP 82240 b. If you can use the emulator HP50G, on the PC, the simulator of the printer, you can download, since... http://www.HPCalc.org/details.php?id=7386

  The printer... HP 82240 B

  

  The cable series...

  

  The description... http://www.allenwan.com/hpcalcserialcable/

  The original cable...

  

• Questions about TV Tuner Satellite A500/040

  Hi all

  I'm new to the Tuner of TV analog digital hybrid and I'm sorry if my questions seem as stupid.

  I have two questions about the of digital TV Tuner analog integrated hybrid in the Notebook Toshiba Satellite A500/040. My understanding is that the TV tuner hybrid integrated able to decode TV signals high definition and their display on TV via its HDMI port. I wonder if I could watch TV shows on your laptop without connecting to a TV. If so, is the software needed? There are several USB TV tuners for desktops and laptops on the market, A500 hybrid TV tuner works differently these USB TV tuners?

  Thank you

  Young

  > I think I know that the TV tuner hybrid integrated able to decode TV signals high definition and their display on TV via its HDMI port.

  N ° this s tv tuner not a HD!
  It s a digital tuner that provides digital video signal 576i and not 1080i.

  Of course, you can use the HDMI port to connect the laptop to the LCD HDMI port but you will not get the quality video full HD as blueray for example.

  I found this Australian page from Toshiba:
  http://www.MyToshiba.com.au/products/notebooks/satellite/A500/psam3a-04000e

  You will find this passage short text:
  + With tuner TV built-in, you can even watch analog or digital TV everywhere where you travel, while the HDMI ports make connecting high definition on your TV screen and sound system. +

  You can also watch TV on mobile phones display! It's a key reason why the TV tuner built in ;)

• Question about lights LED R7000

  Question about this quote from the Manual: "when the router is turned on, the light during approximately 10 seconds and then turn. If all lights lit, this indicates a fault in the router"my router lights LED is turned off. Are they supposed to? I discovered how manually to disable using genius. NETGEAR Nighthawk AC1900 is defective?

  I think the manual means just that at first they all turn on, then off for a few seconds. LED lights depending on what services are available.

  The power light should stay lit. Port LAN LED come on if a device is connected the WiFi LED (Amber on white, 100 M, 1000 m), are we if the radios are turned on. The Wan or the internet LED lights up if there is a connection to the internet. Some of them you can turn off via the user interface, but it is handy to have on so that you know the status.

  It looks like your router working normally.

• Ask questions about the HP Pavilion 14-V041TX Bluetooth

  Hello, sry for asking questions about simple things.

  How to activate bluetooth for laptop HP Pavlion 14-V041TX?

  Or how to bluetooth to detect other bluetooth devices?

  coz already try to use my smartphone, but cannot detect any bluetooth device or laptop.

  for what I know, I already install the driver for bluetooth.

  Maybe there's another driver, that I'm missing?

  Thank you.

  SRY for my bad English.

  HI @Ton1_qrenz ,

  Welcome to the HP Forums!

  It's a great place to find answers.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  No worries about your English.  I believe that I understand your question, and if not, you can specify if you must post back.

  I understand that you are unable to detect Bluetooth devices.

  Here is a document to help you with this company. There are links that it contains other documents that can also be of assistance.

  Understand and troubleshoot Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP)

  If the problem persists, try the following steps.

  Step 1. Go to Device Manager
  Step 2. Right click on "Bluetooth device" you want
  Step 3. Select "update driver software... »
  Step 4. Choose "Browse my computer for driver software".
  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
  Step 6. Select "Ports (COM & LPT)"
  Step 7. Select "Microsoft" to the list of "manufacturers".
  Step 8. Finally select "Standard series via a Bluetooth connection.

  If you are unable to connect to a Bluetooth device, try the following:

  Step 1. Search for 'Change device' in the start menu in Windows 8.
  Step 2. Click on where it says change device installation settings.
  Step 3. Select No, let me choose what to do option.
  Step 4. Check the automatically get the device app option
  Step 5. Click on save changes to save the settings that you select

  So, you can try this

  Step 1: Go to RUN (Windows Logo + R) and type "services.msc" and Enter
  Step 2: Now find 'Bluetooth Support Service' and double click it
  Step 3: Now click on the Log on tab and type "Local Service" without the quotes
  Step 4. Click on "account".
  Step 5: Now remove any authorization of passwords the password field blank
  Step 6: Below the upper left title should be a hyperlink 'Start' click

  You can also view tab management power and unchecked the box "Allow the computer to turn off this device to save power."

  If it is still not resolved, I suggest contacting HP support for further assistance.

  Please contact our technical support at the 800-474-6836. If you are outside the United States / Canada region, please click the link below to get help from your region number. Phone goes everywhere in the world

  Good luck!

• Question about the issue of the Double NAT...

  Hah I posted for a little.  I have a question about Double NAT.  Is it wise to launch?  Reason why is that I have a WRT54G v6 router and the Zoom ADSL X 4 Modem/Router/gateway and it seems that sites take just a little more time to respond to Web sites.  I just want to know I have to turn off (i.e., go in with my router bridge Mode) or what.  Or leave it alone.  Now one last thing: that the problem of slow could actually be AT & T but I have the feeling that this isn't.

  What configuration options you have on the Zyxel to fill? What have you tried exactly?

  The basis for the first option is:

  * Bridged Zyxel.

  * Linksys configured for PPPoE with your user name and password for the internet connection.

  Instructions to fill the Zyxel are here or here depending on the exact model of Zyxel.

  The second option is:

  * Zyxel doing business as the router. I assume here that the Zyxel is on 10.0.0.2 with a subnet mask 255.255.255.0.

  Unplug the Linksys to the Zyxel. Connect a computer to the Linksys. Open the web interface of the WRT to http://192.168.1.1/

  On the main Setup page:

  1. change the LAN IP of 192.168.1.1 address 10.0.0.1.

  2 disable the DHCP server.

  3. save the settings. You will lose the connection. Unplug the computer.

  4. wire one of the numbered LAN ports of the Linksys for the Zyxel. Do not use the internet port of Linksys!

  Now you should be able to open the Linksys web interface to http://10.0.0.1/ all devices connected wireless of Linksys or connected to one of the three LAN ports must have a connection to the internet via the Zyxel.

• Question about KB 2033173 - SNMP configuration

  Hi guys, I have a question about KB 2033173. It is said

  below is an example of the host SNMP Configuration profile:

  Port 161

  Community

  Community 10.0.0.1@0 receiver

  [...]

  Please note that the recipient's address contains a space, not a "/" as input to the command line.

  
  

  I wonder why the "10.0.0.1@0"? I think it should be "10.0.0.1@161" because the port number is 161. Thank you.

  
  

  
  

  Yes, you are correct and also keep in mind that there is a lot of difference with the SNMP agent without traps (use the port UDP/161) and SNMP agent with traps (use port UDP/162).

  

• Questions about vCSHB 6.5.1 (LAN or WAN and physical vs. virtual secondary server)

  Hello

  I have a few questions about vCSHB 6.5.1:

  1) there are two sets of installation guides: one for secondary physical server and a secondary server.

  What are the main differences between these two scenarios?

  (2) for vCSHB, there are two deployment options: LAN and WAN

  2 (a) which option is most common?

  2 (b) If an option (for example, LAN) works in an environment, can I assume that the other would work as well?
  And what a difference these two options?

  (3) is vCSHB backward compatible? VCSHB 6.5.1 works in an environment where an earlier version (for example vCSHB 6.4) works?

  (4) what version of vCSHB (e.g. vCSHB 6.5 or 6.4 and 6.3) is widely deployed today?

  Thank you.

  (1) there should be nominal differences - what is different is discussed the virtual network set up against the physical network implemented

  2 (a), in my experience LAN configuration is more common because it over a high availability solution oppesed to DR.

  2 (b) not necessarily, you should make sure that the appropriate ports are open

  (3) I think it is but you have to bring everything up to a compatible version as a best practice

  (4) I'd go with the latest version as it has been out for a few weeks-

• A question about external authentication with PHP OCI8 using a portfolio store

  Hello
  

  SQL> SELECT * FROM v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE     11.2.0.1.0     Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> 

  OS: Linux Fedora Core 17 (x86_64)
  PHP Version: 5.4.14
  Apache version (httpd): Apache/2.2.23 (Fedora) 

  I have a question about OCI8 connection to the Oracle server via portfolio, which I understand is a good practice because we do not have to hard code the users password. I'm trying to read pages 117 and 118 of the book The Underground PHP and Oracle manual online to learn how to set up a portfolio. I proceeded by steps as explained in these two pages (except that at the end I connect, as a normal user, not a privileged user) yet, apparently PHP does not detect the user.
  
  Here's what I write in my script
  

  $connection = 
                  oci_connect 
                      (
                          "training", 
                          "", 
                          "php_ora_usr", 
                          "AL32UTF8"
                      );

  the training is the name of the user that I use in my PHP scripts to connect to the oracle database and the password is mypassword (is not true, just for the purpose of this thread :)) the code above gives me the following error:)

  Warning: oci_connect(): ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 91
  
  Fatal error: Connection step: ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 13

  But if I also provide the password which is,

  $connection = 
                  oci_connect 
                      (
                          "training", 
                          "mypassword", 
                          "php_ora_usr", 
                          "AL32UTF8"
                      );

  Obviously it works, but at the same time, this means that my wallet is not operational.
  
  So I'll write here, step by step, how I did according to the instructions contained in the pages 117 and 118 of the above mentioned book and I would be grateful if you could kindly tell where I made the mistake (s)
  
  The following text was performed under my oracle linux (so the dbagroup)
  
  Step 01:_
  I created and provided the password for the directory of portfolio

  mkstore -wrl /home/oracle/wallet_dir -create

  Step 02:_
  I created an entry for my oracle user that will be used in my PHP scripts to connect to oracle
  user: training
  password: mypassword

  mkstore -wrl "/home/oracle/wallet_dir" -createCredential php_ora_usr training mypassword

  I also checked that the entry was actually created for my user in the portfolio

  $ mkstore -wrl "/home/oracle/wallet_dir" -listCredential
  Oracle Secret Store Tool : Version 11.2.0.1.0 - Production
  Copyright (c) 2004, 2009, Oracle and/or its affiliates. All rights reserved.
  
  Enter wallet password:                
     
  List credential (index: connect_string username)
  1: php_ora_usr training
  $ 

  Step 03:_
  I added the following to my $TNS_ADMIN/tnsnames.ora

  .  .  .
  php_ora_usr = 
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = db02)
      )
    )
  .  .  .

  Step 04_
  I added the following to my $TNS_ADMIN/sqlnet.ora

  # sqlnet.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
  # Generated by Oracle configuration tools.
  
  NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
  
  ADR_BASE = /u01/app/oracle
  
  WALLET_LOCATION =
      (SOURCE =
          (METHOD = FILE)
          (METHOD_DATA =
              (DIRECTORY = /home/oracle/wallet_dir)
          )
      )
  SQLNET.WALLET_OVERRIDE = TRUE
  SSL_CLIENT_AUTHENTICATION = FALSE
  SSL_VERSION = 0

  _ Step 05
  The TNS_ADMIN environment variable is already set correctly in * / etc/sysconfig/httpd * so I didn't need to do something for this step
  
  
  Step 06_
  I gave to access Apache (as root) in the directory of portfolio (in fact, it seems that the user oracle (dba) of linux also has the required privileges to grant this access to the apache)

  # setfacl -m u:apache:rx /home/oracle/wallet_dir
  # setfacl -m u:apache:r /home/oracle/wallet_dir/{cwallet.sso,ewallet.p12}

  Step 07_
  Restart Apache

  # service httpd restart

  Step 08_
  Finally make a test connection using the connection string php_ora_usr which the entry was created earlier. And the test was not successful, as indicated above

  $connection = 
                  oci_connect 
                      (
                          "training", 
                          "", 
                          "php_ora_usr", 
                          "AL32UTF8"
                      );

  The error message:
  

  Warning: oci_connect(): ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 91
  
  Fatal error: Connection step: ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 13

  I would appreciate it if you could kindly shed some light.
  
  Thanks in advance,
  Dariyoosh

  That gives a good clue to begin with. With your platform/Apache/DB, you might need different ACLs. Test directory and permissions. Check what euid your Apache runs as. Good luck.

• Questions about MRI

  Hi all
  
  My client asked me a few questions about MRI with ecm11g, I can't find the doc online answers, could someone tell me the answer?
  1. what kind of documents can be sealed by MRI, ms office should be able to be sealed, anyway, when I right click on a file .cmd or .rar in windows Resource Manager, there is no seal on in the option list
  2. is there a way to map IRM rights with model of account group/ECM ACL / security?
  3. text search full ECM can a doc sealed (for example: a word sealed) which is stored in ecm?
  
  Best regards

  I don't think that there is no configuration necessary.

  Just checked in 10g (Complutense University of MADRID and MRI):
  -There is a component called IRMIntegration
  -in the section of the Administration there is a menu item that allows configuration of base between the AAU and MRI (URL, port, etc) and it also contains an indicator "Index sealed Documents" - I think that it is the little thing that does not work in your system
  -When an element is integrated, it can be assigned to a metadata field called Protection MRI, which is filled with all the contexts in which a current 'seal' user allowed to (I assume that you do not see this area in your system)

  A context to this field of filling causes an item to be sealed. My system is a little slow, so I knew when the item was GENWWW, it was even made public. Once this was done, it was already sealed (and so was his web viewable format - spdf).

  I'll also take a look if the component is available in the 11g environment.

  As I expected: the component is not available in the 11g environment

  Edited by: jiri.machotka may 3, 2011 04:58

• Where can I ask a handful of general order questions about Firefox OS as a consumer and get the answers? (a forum or something similar)

  I have about seven questions about Firefox OS. I'm potentially interested in opting for a tablet that works instead of Android or iOS. I couldn't find a place to ask questions like that. Thank you!

  https://support.Mozilla.org/en-us/forums/Firefox-OS-English-Forum

  There is another option.

• About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  Hi Michael,

  If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

  One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

  

  Content

  To manage this content, you are currently subscribed and changing your preferences, select the content.

  Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

  You can select to terminate a subscription to a thread.

  

  Learn how to manage your subscriptions

  Take care.

• Where and how do I ask questions about Email?

  The Commission opening thingy is complicated, I have trouble finding my way around it.  I don't know where or how questions about email.  Is there an easier way than trawling through all these icons?  Like a list or something - as you get on all other forums on the internet?

  It would be a good starting point: Mac mini

  Or the appropriate under MAC Os and system software section.

  You might also find this useful: find answers and new questions

• Question about warranty after exchanges of RAM on Satellite module series

  Hello together,

  I have a question about the warranty. My laptop is 5 months old and now I want to improve it with more RAM. I want to do it myself, and now I'm wondering if the warranty will be getting hurt.
  Thanks in advance for your answers.

  Concerning

  TiG3r

  For new models of laptops the RAM upgrade described in s operating manuals. It is public act and it shows the owner of the notebook how do RAM upgrade only.

  If Toshiba offers something like this he won't have the negative influence of valid warranty.
  Buy a compatible module and RAM upgrade.

  Bye and good luck!