Quiz on changes to slide after the LMS downloading fonts

Similar Questions

• I'm unable to access Apple Store after the iSO download 9.3.1 on iPhone 4S. How can I fix the problem

  I'm unable to access Apple Store after the iSO download 9.3.1 on iPhone 4S. How can I fix this problem?

  What happens when you try to access the Apple Store app?

• change input key after the upgrade to windows 8

  I use the pavilion dv6-7012tx laptop, recently I've updated the Windows 8 operating system and then upgrade when you press (shift + 2) gives me "while pressing on (shift +') gives @ may I know what is the problem.is there solutions."

  Hello okkarai1991. I understand that you have some problems with your keyboard after the upgrade to Windows 8. More specifically you get incorrect symbols when you use the combination of keys shift +. Is this correct?

  Though according to me, there is a setting in Windows itself, I would like to add that HP has not released drivers for all models of laptops for Windows 8 yet. Most of the models purchased after October 1, 2011 should be supported. This site has more information on HP and the upgrade to Windows 8.

  This looks like a case of Windows using a keyboard that is incorrect. Each language has several layouts depending on the region, it seems that you have one of the other selected. This is a correction which is normally found in Control Panel. The process to access the control panel is a bit different in Windows 8, so I'll give you detailed instructions.

  1. Press the Windows key to take you to the view of the office.
  2. Move your mouse to the upper right corner of the screen and move it to the bottom, this opens the bar of charms.
  3. Select settings in the bar of charms, then select Control Panel. Then select the Language Options.
  4. Click Add an input method, and then select 'QWERTY-US.'
  5. Remove the old method of entry, leaving only QWERTY U.S. and click OK.
  6. Restart the computer and verify that your work of combinations shift + you want.

  I hope it's useful!

• Recovery without disks manually off during Windows Update (well after the finished download) - Vista Home Premium SP2

  Hello

  I have an Acer with Vista SP2. It has no boot and auto repair after that I stupidly shut the computer manually during a Windows Update.

  I fell asleep and woke up two hours after the start of the update of Windows. Then without thinking, I did a manual stop without recognizing the update restart message. Now Windows does not start, and the auto repair / recovery options have failed three times. Initially he gave me a (?) CMOS settings have changed the error so I went into Setup (with the delete key) and note the date / time has been reset to the date of manufacture of the computer, do not change that. I have however system virus detection function then it off after that repair failed the first time.

  I bought a second hand computer and I have no original discs and I can't find a manually created recovery disc I thought I made some time ago. The label of Windows with Windows Vista Home Premium product key is on the computer. I have access to a Windows 7 CD since another cmputer if this can help me.

  I sent thisquestion from another computer.

  Your help would be much appreciated.

  Hello

  an AV does not stop all

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method 3 depends on your hardware in the computer that failed

• I returned a library book by mistake. After the new downloadi ebook won ' t open in ADE. "

  I returned a library book by mistake. After the download again the ebook will not open in ADE.

  You delete the file and download it again?

• What happens after the full download? I don't see a program, an icon, or the next steps...

  What are the next steps for open test software after the Download Assistant has been installed?  No instructions for the next steps!

  Biggly2000 try to download a new copy of products download Acrobat installation files | Standard, Pro | XI, X.  You can install the software in trial mode.

• Impossible to go to the next slide after the addition of advanced response and other action

  Hello
  I'm creating a quiz and there are problems, that I can't solve.
  I have a flash project with the login page, where the user must fill out name, company and e-mail address. This e-mail address to send the results of the quiz. After correctly to fill in the gaps and click OK, my flash app starts within the project Adobe captive 4 (swf file). And now the problems:
  
  1. in my captivate project: I have a question, 3 replies, 3 possible attempts and only one correct answer. If the wrong answer user, there are gray hightlight, which should apears on my chosen wrong answer in a box and stay there to mark already selected response and there is also an animation of text "Sorry, your answer is not correct." under the quiz (on the same blade), who appears the error message instead. No problem, it works, I made a script for it, which is attached to each wrong answer (in edit the Question > advanced (responses) > execute advanced measures). But the problem is with the right answer (it shows text animation "Congratulations!" and the hightlight green box). If I specify the event on the right answer, and then send the correct answer, it shows the hightlight, animating text box, but it does not continue to the next slide! It stucks despite settings change the Question > Options > (if correct) Action: go to the next slide). If I add new statement to my script, which is "Go to the next slide" and then click on the right answer, she immediately move to the next page and does not display the box hightlight and animating text. How can I wait until the duration of the animation ends and after that go to the next slide?
  
  Script for action advanced on my correct answer is:
  --> To see the rightHighlightBox
  --> To see the congratulationsText
  
  2. I need to another option of fail passes, for example - I have 30 questions - 3 correct answers, 3 attempts. User submits the wrong answer, then he has the right, but he chose the wrong first-> 0 points. This is e-learning and I need allow users to correct.
  
  3. How can I export the value of correctAnswers for my flash? Is this possible?
  
  Thank you very much for the reply!

  Hello

  Add a statement "Continues" at the end of your script, otherwise you will need to click on Skip to go to the next slide.

  And Quzzing information is accessed directly from Flash using the Quizn variable.

  Thank you
  Ravi

• Decide the next slide after the slide in question.

  Hello

  I am using Captivate 5 on XP.

  A question on the slides of question and the navigation between them.

  I have a slide menu with 6 chapters. Each of the chapters contain 3-4 slides. After each chapter, I have a question slide by a simple question about the chapter the user just visited.

  What I would like is that if the user answers correctly, he returned to the menu slide. If he or she responds badly, I would go to a saying to slide something like 'you answered incorrectly' and then go at the beginning of the same chapter. It would be even better if the user got another question when it will return to the issue once again.

  Then the same for the rest of the chapters. I already had a final quiz at the end, but I think that in this way with any questions after each chapter will be easier to use.

  Is it possible to orient the user based on the correct/incorrect answer to a question slide?

  Thanks in advance.

  Kind regards

  Patrik

  What are the parameters of the Quiz? More specific: option then required. By resetting the failure levels, you now have a caption incorrect, right?

  And the quiz carried at least the menu slide, by inserting a button or click box, as Rod suggested at the beginning?

  Lilybiri

  BTW, if these questions are as simple as that (you may just created a sample) and one per chapter, I would have created question slides myself, not used the default question slides. This way you have full control and no mind as to the scope of quiz.

• Is not changed after the model download

  Sometimes it works but right now does not work.

  After I have chnaged the model, transfer it with dependent files (CSS), but on the web, it has not changed.

  But on the files in Dreamweaver has changed... I'm here doing wroing... Help

  Thanks for reading

  Models don't do anything on the side server. You need to download individual pages on your server.

  Hit refresh in your browser (F5 or Ctrl + R) to see the changes.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB
  www.Alt-Web.blogspot.com

• Array.length changes not really after the item deleted?

  Frame 1, I loaded 9 clips (pieces of a chart) and their names of the instance (piece1, exhibit2 etc.) are in a table, arrPieces.   In 3, I'm trying to remove them, but I discovered that I had a problem with my while loop.   I removed the loop and discovered that the problem is really that the size of the array does not reduce after that I deleted an item.   I could not find it in the documentation.  Is this true?  I do not suspect.

  That's what I've stripped the code in frame 3 down for:

  trace (arrPieces.Length);     9 as planned
  var whichPiece = Math.floor (Math.random () * 9) + 1;
  arrPieces.splice(whichPiece,1);
  trace (whichPiece);   as expected
  trace (arrPieces);   as expected
  trace (arrPieces.Length);   still gives 9 - should not
  Stop();

  Something obvious, I suppose, but I can't.   Help appreciated.

  Marion

  I don't know what you've changed things in, but you can still get the random index duplicate values, though that if you are splicing to the table, then it should not matter.

  I don't know what else is going on in your code, or if you really need to remove the elements in the array, but you might consider randomizing just the array and then read through it, from 0 to 8.

• Contrast and color change 10 seconds after the restart.

  Hi, I have a problem with my laptop Toshiba Satellite L300D, and every time that I reboot, and when restarting over my screen is all nice and dark and strong colors. After 10 seconds, he jumps and gets very bright.

  If it is too difficult to understand what is happening, that person has the same problem on different system model.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=191911

  I tried the FN keys do not help, it does not contrast of brightness.

  It's high-contrast / Bright and it kills my eyes. Thank you.

  Hello

  You can try the following:

  1. download and install a display driver of [European Toshiba driver Page | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] before installing, remove previous installed a
  2 update utlity vap (if you use xp, it is called common module, I guess)
  3 reinstall the operating system

• How can I prevent Captivate to advance to the next slide, after the end of the audio and I click on click to show/hide sidebar box?

  I currently have a slide that plays audio.  While usage is listening to the narration that I can click on three different click the boxes with advanced actions to open and close text boxes, I want the user to read the value.  When reading narrative ends and I'll click on the boxes to click to read a text box, it moves to the next slide.  I understand that I may have to replace the box with smart buttons click but I don't know how to stop the progression to the next slide.  I already have a next button that is put on pause until the user clicks.  Any help would be greatly appreciated.  I'm on a tight schedule.

  Quickly, I created a sample file, just have a slide with three form buttons that act as the toggles and a next button. The first three buttons break late exactly at the same time and the next button.

  Since it's the slide by clicking the audio stops no audio at all (common misunderstanding). I created a shared action, with the purpose to display and the variable (mine are labeled v_one instead of v_visib) as parameters:

  

  StarOne is what you want to show/hide. You can click on infinite time on each key to show/hide this element. He won't interfere not audio, once he started playing he will continue. When the audio is finished, you can still continue to click. Just click on the next button will advance to the next slide. It's my calendar

  

  No need to rewind the playback head in this case at all.

• Change adapter HFM after the upgrade of FDM 11.1.1.3 to 11.1.2.1

  Hello
  
  I've updated the FDM since version 11.1.1.3 to 11.1.2.1. The last step I think is to re - register the adapters to 11.1.2.1 FM11x-G5-E - version
  All know how with rebuild them the maps?
  
  Or pointers appreciated!
  
  Thank you
  PM

  The adapter is not related to the mapping table. Simply import the XML adapter and then save and configure the adapter on each application server in FDM in the environment:

  (a) to connect to the application of FDM via the established customer
  (b) choose file > import and select the file FM11x-G5 - E.XML and choose 'open '.
  (c) click on "Select all" and click "Import" to import the card in the application
  (d) copy the folder "AdapterComponents" which appeared in the card .zip file in the Oraclle\Middleware\EPMSystem11R1\Products\FinancialDataQuality\SharedComponents directory
  (e) choose file > adapter register and choose the AdapterComponents\fdmFm11xG5E\fdmFM11xG5E.dll file and choose 'open '.
  (f) make a right click on the FM11x-G5-E adapter and choose 'configure' and enter username/password / confirm password/domain of FDM Service account and click OK. * NOTE: This is the account that was used for the configs FDM (App Server, server load balancing, tasks, Web Config Manager)
  (g) choose Tools > Application settings and change the adapter FM11x-G5-E installation Code

  You can then syncronzie the settings of the adapter from the old to the new card by right-clicking the adapter Fm11x-G5-E and choose "Synchronize" and choose the adapter FM11x-G5-C as a source and click OK to copy the settings of the new card.

  You may need to update the target periods and categories in the Control Board on the web.

  That should be all.

• Automatic, change of name after the transfer.

  I have a lot of folders, each contains three files called 'blue', 'green' and 'merge '. I want to get out their individual records of all files and put them in a single folder. The problem is to know how to do this without crushing. Rename hundreds of 'blue', 'green' and 'merge' the files manually (for example numbering isn't an option). Sort rename them automatically when they arrive in their new folder is required.

  Hello

  It is not possible by design. You can use your favorite search engine and check for any third party software that will help to do this task.

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

• KB951847 X 86 settled after the successful download and gives error code 0 x 643 how do I correct or I give up?

  TURBO TAX REQUIRES .NET @ LEVEL 3.5 BUT IT WONT INSTALL.

  Hello

  You did changes to the computer before the show?

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/976982