R12.2.3 Custom OAF Page deployment Exception: could not load AM. Any idea?

Similar Questions

• Cannot install paintnet 3.5. It gives an error "system of e/s file not found exceptions could not load file."

  Original title: uninstalled paintnet3.5 now impossible to reinstall download

  "downloaded the file and open it to install gives this error :-systemi/o file not found exceptions could not load file or Assembly of base of the version3.0.0.0 culture = neutral public key token = 31bf3856ad364e35' or one of its dependencies, the system cannot find specified file base name of the 3.0.0.0 - batch version of gibberish between - then" AVT Assembly binding logging is disabled to allow to link failure check the registry value (hklm\software\microsoft\fusion\enablelog (c word) 1 IAM onwindows vista service pack2 version6 and ihavent a clue unless something has been lost in my recent wave of attacks of malware bullguard - computer reports now clean-i do not know how to access the files of basic trends are not listed as installed programs

  Hi Bernie, 78,.
   
  I suggest that you follow these steps and check if it helps.
   
  Step 1:
   
  Right-click on the setup.exe file and run as administrator and check.
   
  Step 2:
   
  I suggest that make you the SFC scan on your machine like a system file is damaged or missing. Scan SFC repairs and tries to retrieve system files.
   
  Step 3:
   
  I am not quite sure if the malware is flushed out of your system. I wish that you run a scan complete of your security again software or run a line scan using the link below.
  http://www.Microsoft.com/security/malwareremove/default.aspx
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• 12.2.4 deployment application: could not load application

  Hi all

  I was faced with error: "oracle.apps.fnd.framework.OAException: could not load application module" and the solution was to bounce the web server, but the documentation does not have to bounce...

  I followed the following steps to deploy my application:

  1 copy the files in $JAVA_TOP/xxcompany (we use the standard recommendation)

  2 change of privileges: chmod-r $775 JAVA_TOP/xxcompany

  3. run the utility "adcgnjar": adcgnjar

  4 import pages to MDS OFA: applications java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxcompany/oracle/apps/xbol/TimeCard/security/webui/LoginPG.xml - username username-password apps - "$AD_APPS_JDBC_URL" - rootdir $JAVA_TOP dbconnection

  5 edit the file '$APPL_TOP_NE/ad/custom/adop_sync.drv '. Add the following entry in the section marked by the "customization #Begin" and "#End customization" comments

  rsync - zr %s_current_base%/EBSapps/comn/java/classes/xgsg %s_other_base%/EBSapps/comn/java/classes

  At this stage the doc says to work... but no! oracle.apps.fnd.framework.OAException: cannot load application module

  We bounce server web and everything worked!

  We missed something?

  But the question of additional cost is on "adoption" the doc said: a) run '= prepare adoption phase' before step 1 and, b) run "adoption phase = failover ' after step 5.

  My DBA said it is not necessary (and he was right, because the bounce was enough).

  Then... Why the doc says: run adoption?

  Some suggestions? CLO, DilipG, Fernando Barros-Oracle, aJohny

  THX

  Then, after your bouncing experience is sufficient, and steps are correct?

  I would say the rebound is enough for a development environment.

  But I consider the steps adopted for a production environment.

  See you soon,.

  Olivier

• Urgent how page CUSTOM OAF toTranslate. Please Note CUSTOM OAF page not Standard OFA

  Hello

  We have developed a customized OPS in English page. Our client now wants the same page is available in FRENCH and ARABIC.

  Please help on this. Its Urgent 535571

  Hello

  I had the problem solved by following the steps below

  Step 1:- go to--> page customize Custom OAF page--> click on customize (pencil icon) for values or labels you want to translate.

  Step 2:- change the prompt value to inherit the same value in English how it was displayed before. Click on apply

  Step 3:- go to functional administrator--> customizations--> Application Catalog--> give you OAF page path in the path of the Document--> to Manage customizations--> translate and give respective language and values.

  Kind regards

  Matt Rohera.

• Could not load application module in R12.2.4 when I changed the class files directory

  Hi all

  I was able to successfully deploy a page in R12.2.4 where my path of the class file was like xxx/oracle/apps/fndxxx/abcd/Server

  but now, the directory must be changed to xxx/oracle/PSA/xxfnd/abcd/server, so I'm updating all the files of AM, VO, CO to point to the new directory and compiled and FTP'd to JAVA_TOP

  Bounce is done, but still the page is trying to access the page of the old directory (xxx/oracle/apps/fndxxx/abcd/server)

  It is said: oracle.apps.fnd.framework.OAException: could not load application module xxx/oracle/apps/fndxxx/abcd/Server/xxxAM

  I checked the classpath and it points to JAVA_TOP, also verified the file permissions (777)

  What could be the problem, please let me know

  @AJ: Please help me... You are the fastest of all

  Thank you

  Valsaint

  Hi all

  It was the FORM function issue, where he wasn't pointing to the updated file directory structure

  Thank you

  Valsaint

• Could not load the webapp in deployment

  Hi guys,.
  I'm trying to deploy my adf application.but get this bug.any idea what I am doing wrong.

  [18: 30:38] cannot determine the platform target profile.  Using default

  [18: 30:38]-deployment began.  ----

  [18: 30:38] the target platform's (Weblogic 10.3).

  [18: 30:41] recovery of the existing application information

  [18: 30:41] analysis of the dependence running...

  [18: 30:41] building...

  [18: 30:49] deployment 2 profiles...

  [18: 30:49] wrote on the Web for C:\Users\Fusion\Desktop\demoApp - Copy6\ViewController\deploy\demoApp_Project1_webapp.war application Module

  [18: 30:51] wrote the Module Enterprise Application-C:\Users\Fusion\Desktop\demoApp - Copy6\deploy\demoApp_Project1_demoApp.ear

  [18: 30:52] Application deployment...

  [18: 31:06] [Deployer: 149191] Operation "deploy" on demand "demoApp_Project1_demoApp" boot on 'WLS_FORMS '.

  [18:31:15] [Deployer: 149193] Operation "deploy" on demand "demoApp_Project1_demoApp" failed on "WLS_REPORTS".

  [18:31:15] [Deployer: 149034] an exception has occurred for task [Deployer: 149026] deploy demoApp_Project1_demoApp on WLS_REPORTS, AdminServer, WLS_FORMS. : [Deployer: 149145] failed to contact "WLS_REPORTS". Deployment is delayed until 'WLS_REPORTS' becomes available. ; nested exception is:

  java.rmi.UnknownHostException: could not discover the URL of administration for the server 'WLS_REPORTS '.

  [18:31:15] [Deployer: 149193] Operation "deploy" on demand "demoApp_Project1_demoApp" failed on "AdminServer.

  [18:31:15] [Deployer: 149034] an exception has occurred for task [Deployer: 149026] deploy demoApp_Project1_demoApp on WLS_REPORTS, AdminServer, WLS_FORMS. : could not load the webapp: 'demoApp-ViewController-context-root ".

  [18:31:15] [Deployer: 149193] Operation "deploy" on demand "demoApp_Project1_demoApp" failed on "WLS_FORMS".

  [18:31:15] [Deployer: 149034] an exception has occurred for task [Deployer: 149026] deploy demoApp_Project1_demoApp on WLS_REPORTS, AdminServer, WLS_FORMS. : could not load the webapp: 'demoApp-ViewController-context-root ".

  [18:31:15] WebLogic Server Exception: weblogic.application.ModuleException: could not load the webapp: 'demoApp-ViewController-context-root ".

  [18:31:15] caused by: java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet

  [18:31:15] check the server logs or the console of the server for more details.

  [18:31:15] weblogic.application.ModuleException: failed to load the webapp: 'demoApp-ViewController-context-root ".

  [18:31:15] undeployment.

  [18:31:15] - incomplete deployment.

  [18:31:15] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

  Thank you

  Raul

  User, please tell us your jdev version!

  It seems that you have not installed the adf runtime for your version on the server you are trying to deploy.

  Timo

• XP Windows Media Center error "Application has generated an exception could not be treated.

  XP Windows Media Center error

  My windows Media Center continues to send this message whenever I try to open it.

  Application has generated an exception could not be treated. Process id = ox1cc4 (7364) thread id = 0x1cb4 (7348)

  I gives me the ability to run the JIT debugger and when I try I get this message.

  Registered JIT debugger is not available. An attempt to start the JIT debugger with the following command resulted in an error code of 0 x 2 (2). Check the settings of the computer.

  Cordbg.exe 1A 0x1cc4

  Hello

  ·         You did changes to the computer before the show?

  ·         You have the latest updates of Windows installed including the Service Pack 3 for Windows XP?

  Try the following.

  a. close Windows Media Center.

  b. Click Start. Click Run, type cmd in the Open box. Press enter.

  c. type each command mentioned below one after the other and press enter.

  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  d. restart Windows Media Center.

• When I try to use the parental controls, I tells me that this page could not load any ideas

  When I try to use the parental controls, I tells me that this page could not load any ideas

  Hello

  Since when are you facing this problem?

  If it worked before, then do a system restore to restore the computer to an earlier point in time before the problem started.

  See these articles for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Live Preview error: could not load the page Live Development

  When I click on live preview.  Cromemo open without images to http://127.0.0.1:49836/Edge%20Code%20Assets/Start/index.html

  Can I get the Preview Live error message: could not load the page Live Development

  What should I try to fix this.

  Dean

  It is now defective due to a change in API with Chrome v34. We are currently working on a change which will be published shortly. She will work in Chrome v33, but I don't know if there's a way to go back.

  FYI, edge Code is based on media (http://brackets.io) that has the fix for this problem, so you can also try with strips.

  Randy

• Warn custom OAF Page changes

  Hi all
  
  I have a custom oaf new page that has been developed in which there are three regions. Now the three area there are two buttons record and cancel. I want to have a warning about the changes on the Cancel button.
  
  I had activated to true to warn about changes to the page layout area.
  
  But when I do it by clicking on save and Cancel button it triggers pop-up screen.
  
  My need is when I click on the Cancel button, it should display messages warning, but not when I click on the button Save. Any thoughts on this
  
  Any help is very appreciated.
  
  Thanks and greetings
  Vinod

  Hello

  Set client-side validation false to save button and check.

  I hope that in this case, it will not popup.

  Kind regards
  Out Sharma

• Names of approvals before submitting the custom OAF page

  Hello
  
  I posted the question below in Workflow forums but I have not received any response so thought to post it here. Please read.
  
  I created a new workflow that is triggered when a customized OPS page is submitted. This workflow is dynamic approvals and I created this workflow without using the SOUL. Now, how to display the list of approvers in the submission page? Please let me know.
  
  Thank you
  PK

  Using a table with a single column to the approvers.
  No other controls are flexible enough to display several lines of data...

  Prasanna-

• Exception: "could not validate SAML token.

  We have a configuration of rating system that we use to generate a PDF of Psalm we you connect through the EJB client and usually have had no problems. Until today. At some point today we started seeing some exceptions are thrown on the client:

  Caused by: com.adobe.idp.um.api.UMException | [com.adobe.idp.um.api.impl.AuthenticationManagerImpl] errorCode:16421 errorCodeHEX:0 x 4025 message: SAML - Assertion impossible to validate the token has expired and therefore not valid for user [administrator@DefaultDom]. Its valid until time [kill Feb 04 10:58:45 MST 2014] turns out to be before the current time [kill Feb 04 16:04:41 MST 2014]

  Bounce just the application server running the client code has solved the problem, but we would like to better understand what is happening and why. Nothing of what I can find in the docs seems to indicate the cause/solution and possible solutions have links which seem to no longer work: http://cookbooks.adobe.com/post_Renewing_the_context_to_handle_session_expiry-16410.html

  Any suggestions or insight would be greatly appreciated. Thank you!

  PROBLEM

  Using the same instance of ServiceClientFactory to call remote services exposed by the LiveCycle container can lead to

  exceptions related to the expiration of the assertion

  Solution

  To handle the timeout use the ThrowHandler mechanism provided by the ServiceClientFactory framework

  Detailed explanation

  LiveCycle provides a client sdk for java-based client call its services remotely.

  An invocation involves the creation of an instance of ServiceClientFactory setting user credentials in thefactory instance passes this factory to a customer of service or creating an InvocationRequest directly

  Use the client to perform the actual request.

  For more details, see Invoking

  LiveCycle ES using the Java API .

  An instance of ServiceClientFactory once created is valid for a certain

  period of time that is default 120 min., if the same instance is used to call beyond that period, while he leads to an exception indicating that

  the session has expired [com.adobe.idp.um.api.impl.AuthenticationManagerImpl]

  errorCode:16421 errorCodeHEX:0 x 4025 message: could not validate SAML

  Token - Assertion has expired and therefore not valid for the user

  [administrator@DefaultDom]. Its valid until time [Thu Oct 22

  17:07:53 IST

  2009] turns out to be before the current [Thu Oct

  [22 17:58:18 2009 IST]

  This isn't a problem if the ServiceClientFactory instance is used for a short time. However if you want to make a long

  the task as great conversion number of documents to PDF, applying the policies their etc., then it would be a problem.

  Session time-out

  Before fxing the question some info on what is session time-out.

  • When you use an instance of ServiceClientFactory to invoke service suite fow arrives
  • You set credentials in the properties and call the service
  • LiveCycle server side validates the credentials and issues a context. It's the kind of a ticket which can be reused later rather than the actual credentials.
  • After receiving the response from the server the ServiceClientFactory instance deletes its own copy of credentials and instead stores the context for calls more later on that this instance of context is passed instead of the credentials of the user
  • This fow everything is done to ensure that the credentials of the user are not sent for each remote call, thus improving security.

  For more information about the context, refer to

  Identity of the user in LiveCycle .

  Solution

  Fx this problem you need to re authenticate to LiveCycle and get the context new draw. the best way to do this is to use the ThrowHandler provided by the ServiceClientFactory framework

  Step 1 - create a Throwhandler

  ______________________________________________________________________ ______________________________________________

  /**

  * This ThrowHandler caches the credentials of the user and use them

  to update the framework in the

  * ServiceClientFactory to expiration.

  */

  private public static class SimpleTimeoutThrowHandler implements

  {ThrowHandler}

  private String username;

  private String password;

  public SimpleTimeoutThrowHandler (String username, String

  {password)

  me.username = username;

  This.password = password;

  }

  public boolean handleThrowable (Throwable t, ServiceClient

  SC,

  ServiceClientFactory EFC, MessageDispatcher md,

  IR InvocationRequest, int numTries) survey

  {DSCException}

  {if (timeoutError (t))}

  The call to AuthenticationManager does not require

  the authentication if the default properties

  are the people

  AuthenticationManager am =

  New

  AuthenticationManagerServiceClient (ServiceClientFactory.createInstance (getDefaultProperties()));

  AuthResult ar = null;

  try {}

  AR =

  AM. Authenticate (username, Password.GetBytes ());

  } catch (UMException e) {}

  throw new IllegalStateException (e);

  }

  Context ctx = new Context();

  ctx.initPrincipal (ar);

  Refresh the ServiceClientFactory instance with

  the new context

  scf.setContext (ctx);

  Logger.info ("refresh the related context

  ServiceCLientFactory");

  Now say CFS to try again, the invocation

  Returns true;

  }

  Check so that we do not again wrap the exception

  If (t instanceof DSCException)

  throw (DSCException) t;

  If (t instanceof RuntimeException)

  throw (RuntimeException) t;

  How is it possible to get that much?

  throw new IllegalStateException (t);

  }

  Private boolean timeoutError (Throwable t) {}

  If (!) () t.getCause () instanceof UMException)) {}

  Returns false;

  }

  UMException EU = t.getCause ((UMException));

  Check that UMException is due to the

  expiry of the assertion/context

  if(UMConstants.errorCodes.E_TOKEN_INVALID ==)

  {ue.getErrCode ()}

  Returns true;

  }

  Returns false;

  }

  }

  ______________________________________________________________________ __________________________________________

  This ThrowHandler would be invoked by the ServiceClientFactory to receipt of any exception. The manager would then determine if it's a timeout on the exception and then update the context associated with the instance of the factory and told him to retry the invocation.

  STEP - 2 record Manager

  ______________________________________________________________________ __________________________________________

  ServiceClientFactory.installThrowHandler (new

  SimpleTimeoutThrowHandler (username, password));

  ______________________________________________________________________ __________________________________________

  Note: the Manager should be listed only once in the application

  STEP 3 - make your invocation

  Following example would try to apply policies to all the fles present in a directory

  ______________________________________________________________________ __________________________________________

  Properties p = getDefaultProperties();

  p.setProperty (DSC_CREDENTIAL_USERNAME, username);

  p.setProperty (DSC_CREDENTIAL_PASSWORD, password);

  EFC ServiceClientFactory =

  ServiceClientFactory.createInstance (p);

  Now, to make a long running operation

  String inputDirName = "path-of-entry-dir";

  String outDirName = "path - to the-out-dir";

  String policyName = "the-policy-name ';

  Download the file = new File (inputDirName);

  Folder outDir = new queue (outDirName);

  RightsManagementClient rmClient = new

  RightsManagementClient (CFS);

  DocumentManager docManager = rmClient.getDocumentManager ();

  Iterate over all in the inDir pdf and apply the

  policies. If it takes a

  {for (file pdfFile: {inDir.listFiles ())}

  The inDoc document = new Document (pdfFile, false);

  Document securedDoc = docManager.applyPolicy (inDoc,

  pdfFile.getName (), policyName, null, null, null);

  securedDoc.copyToFile (new

  File (outDir, pdfFile.GetName ()));

  }

  ______________________________________________________________________ __________________________________________

  Now the invocation would end even if it takes a lot of time. If any session time-out occurs then our ThrowHandler would take care of it.

  Here's a sample:

  TimeOutSample.zip

• I design web pages and my fuzzy elements becomed button, any ideas? anyone?

  I recently started to design web pages, and with version 16 my button elements would display correctly, however with the 20 version they have, any ideas? anyone.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

  If it works in normal mode with all extensions (Tools > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change via "Firefox > Exit ' (Windows: Firefox/file > quit;) Mac: ' Firefox > quit Firefox. " Linux: "Firefox/file > exit ')

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• After adding an intro page. Pages of my site not loading not 100% please help!

  Hello everyone. After you have added an intro page annimation on my site and creation of a few areas of appro. us. Fr.. & .jp, the pages of my site will be not load 100%. I have no idea where to start to fix this problem. Thanks for your time!

  www.highestgoodclothing.com

  Hey guys. I was able to run in the same window. I replaced the "_self" in the link in the HTML5 for "_self".

  

  http://Allwebco-templates.com/support/S_target_link.htm

  I got it from that hopefully it can help someone in the future. Thank you!

• How to ADD Global buttons (home and Logout) to custom OAF page

  Hello

  I created the personal responsibility. Custom and Custome menu menu home page and attached 4 menu html in the menu of the home page.

  Now my requirement is in the pages of the home and logout links do not come I want to add the.

  Please suggest me to achieve this.

  Thank you and best regards,

  Sangu

  Oracle has created the standard menu for similar global buttons (home, Logout, preferences etc.) titled

  ICX_STANDARD_GLOBAL_MENU to add these buttons simply add to your menu that contains your page this menu.