Similar Questions

• Are there any restrictions for custom object records?

  Hello

  Are there any restrictions for custom object records?

  Thank you

  Hello

  Registration of custom object data cannot be used:

  • with Hypersite field mergers;
  • with the research data on the data in the field, only the number of overall;
  • on off key Dynamic Content in the emails

  edynamic expert Eloqua

• Custom object of the quantities Record Field (best practices)

  Hello

  I've been searching but can't seem to find the best practices or recommendations on how many fields to the max may or must be in a single record from custom object. Is there someone out there who could give some information on this? or perhaps point me to some documents or articles on the subject?

  Thank you!

  You can take the class effective Marketing with the custom object class to better understand.  An excerpt from the guide of the student with the limitations thereon:

  

• Iterate through rows in the object using the pageflowscope variable view

  I'm looking for a way to browse multiple lines of a view object and the transaction using a variable that is stored in a variable pageflowscope programmatically.

  I have two view objects that have a relationship of the master / detail.  The jsf page ADF Master table secondary table created by the control of data objects. The requirement is to have a single button that when pressed will update all the selected record of the master detail records.  One of the operations that must be done is a value that is stored in a variable PageFlowScope.

  The approach adopted to accomplish this was based on the following video:

  ADF Insider Essentials: Iteration through rows in a view object programmatically

  Author: Grant Ronald

  Link: http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/ADF_Insider_Essentials/IterateRows/IterateRows.html

  I created the Classes of line of sight for the two display objects and developed the method for updating the lines (code below).  The method that takes no parameters, has been added as a tool bar button to the page and works as expected when you use a hardcoded value.  I would add a second update statement in the while loop to update another column, but using the value of the variable PageFlowScope is stored a previous view in the taskflow.

  I thought I'd be able to use AdfFacesContext.getCurrentInstance () .getPageFlowScope().get("objectid") to get the value but I get a warning in the source editor, 'this guy or a variable 'AdfFacesContext' not found. "

  How can I do this?

  JDeveloper Studio Edition Version 11.1.2.4.0

  METHOD CODE:

  /**

  * Method to update the tool work order status

  */

  public void checkInTools() {}

  All lines wor (RowSet) = getWOToolAsg ();

  While (wor.hasNext ()) {}

  CurrentRow = (WOToolAsgVORowImpl) wor.next () WOToolAsgVORowImpl;

  currentRow.setToolActive("Y");

  Add code here to get OpNmb of pagescope variable and update record in table - type String

  }

  }

  Thank you.

  Scott

  You must import the class to use.

  Import oracle.adf.view.rich.context.AdfFacesContext;

  AdfFacesContext (Java QAnywhere for Oracle ADF Faces)

• Customizing object in the Notification of the assignment in the task of IOM 11 approval

  Hello
  I would like to modify the object in the notification of default SOA. The purpose of the e-mail message have standard text = "Action required: I found metalink doc (1305748.1) how to:
  "For as the subject of e-mail as a single task title without the string"Action required", we can define a group of resources in your project and add the following property and set it to empty. Redeployment of the SOA project is necessary.
  TASK_VIEW_CONTEXT_ASSIGNEE_ASSIGNED ="
  but I do not know how to create the correct resource group for SOA project. I tried to create the file of properties owned, but without success. Any body can help with this.
  Best
  MP.

  Hello

  The file you are talking about is
  WorkflowLabels.properties
  Place it under
  DIRECTORY_PATH/Oracle/BPEL/Services/workflow/resource/WorkflowLabels.properties

  Get the solution against the link.
  http://docs.Oracle.com/CD/E23943_01/dev.1111/e10224/bp_workflow.htm#BABDIBBJ

  get the location:
  $Middleware/Oracle_SOA1/soa/modules/oracle.soa.workflow_11.1.1\bpm-services.jar
  Extarct and is WorkflowLabels.properties of:
  BPM-services\oracle\bpel\services\workflow\resource

  Thank you
  Kuldeep

  Published by: Kuldeep on May 4, 2012 01:52

• Custom AF:table, the default filtering view filtered etc.

  JDeveloper 12.1.3

  I am trying to assemble the pieces, I found on these forums and elsewhere on the web, given that I use 12.1.3 do not know if what I found, it is best practice, given that some ideas are dated.

  Let's say I have a table of addresses, several fields such address_id,address_line, city, state, zip, country... but what is important for this use case, the table has a current flag, which is always either Y or N.

  1. try to implement filtering without using table blockable af. The main reason is that users do not want to see this side of filter above the column headers. In addition, the table should be filterable by a single attribute (current flag), and finally this even filterable column is not used in the presentation of the table, only the addresses in the table. The current filter is af:selectOneChoice something like:

  < af:selectOneChoice label = "Current"? ID = "soc2" simple = 'true '.

  valueChangeListener = "#{backingBeanScope.backing_view1.filterChanged} '"

  autoSubmit = "true" binding = "#{backingBeanScope.backing_view1.currentFilter}" >

  < af:selectItem label = "All" value = "All" id = "si2" / >

  < af:selectItem label = 'Current' value = 'Y' id = "si3" / >

  < af:selectItem label = "Non-routine" value = "N" id = "i5" / >

  < / af:selectOneChoice >

  2. the second condition is that when the user opens the page for the first time, more high af:selectOneChoice is defined on < af:selectItem label = 'value' = 'Y' id = "si3" / > and the table is filtered to display only the lines with the flag set to y. user can use af:selectOneChoice to set the table to any other option. If the user navigates to this page and returns, the table and the 'filter' must retain value selected previously.

  3. If a table is filtered with say < af:selectItem label = 'value' = 'Y' id = "si3" / > and the user modifies or creates record, such as modified or new address is marked with current = 'n', (and this is done in the form of popup dialogue), after the closure of the pop-up window CRUD, newly edited/created record cannot be demonstrated.

  I guess I'd know how to implement these requirements individually (not sure about 2 though) but putting all the best practice way, probably not. Any help is appreciated, I'll close this thread once I have a complete solution for this use case (which I or someone else will publish) so that it can be useful in the future.

  My 5 cents:

  1.

  valueChangeListener = "#{backingBeanScope.backing_view1.filterChanged} '"

  backingBeanScope is specific scope adf provided for declarative components.

  If your code is not part of these components so it is best to use a different scope (for this use case, application scope is probably sufficient and you can't even write the requestScope prefix)

  Binding = "#{backingBeanScope.backing_view1.currentFilter}" > "

  It is usually bad practice (any component of a binding class is a standard approach for desktop applications, but not for the JSF).

  In short, you should bind the component to a managed bean that you must handle with any component (which is rare).

  In all other cases, you must create a concrete property binding (as the "value", "label", "read-only",...)

  2. you are talking about the value of the element, so it would be 'natural' to link the 'value' variable in some managed bean property.

  Because this bean must survive browsing, it should be placed in pageFlowScope or sessionScope.

  3. well, you will probably be filter your lines using ViewCriteria.

  Then maybe that you can use ViewObjectImpl.rowQualifies () method of applied access VC, read the value of the bind variable and determine if this line should be displayed or not.

  Something like this: binary: the substitution of ViewObjectImpl::rowQualifies (...) for memory filtering of the child nodes of a tree component

  Dario

• Custom object filters (data card)

  How do you run the filters with data cards?

  We have Contact information stored in the Contact record, and our products are stored against cards of data with the email address as a common link between them.

  I need to run reports for some products, that lists all the products selected for some countries.

  Kind regards

  John

  He discovered. Using the "field of the linked object Custom' and 'A related custom object' in the contact filter allows filtering in the game of the data card.

• The default value based on the field from another table to a custom object

  I'm trying to set the default value to a field in the custom object to the value of a field of account. I tried the syntax 50 ways different and just don't get the case. The label for the account field displays the form of s/n, the integration of the tag is ltDBA_ACCT and it appears in the fx reports area as Account.Text_22.
  
  The field of custom object that I am triying update is also called s/n, which was originally the required field 'NAME '. The name of the table, account, should it be included? Do I need a function to the field?
  
  I've updated the external ID using the line with syntex < ID > ID (at least higher ID) so I know that it is possible to define a default value, but s / < n >, < ltDBA_ACCT >, 'account '. "" S/n "and so on are simply not working.
  
  If anyone knows how to get into what I would be really grateful for the help.

  OK, so if you default a field to the value of another object, you must use the JoinFieldValue function. I think you understand that, based on your original post, but I want to be sure you do.

  Then this won't work by default if the folder is created from the object that you want to join the because a default works in record creation and the ID must be available so that it works correctly. It will not work if you choose the record of the related object after that registration of the custom object is created. You can set the default after, but that does not meet your requirements.

  The syntax of the default are the following: JoinFieldValue (ref_record_type, foreign_key, field_name).

  In your case, ref_record_type is '', foreign_key is [] and field_name is ''. The best way is to determine what is the name of the field to create a new workflow for the account and use the Workflow Rule Condition expression builder to choose your field ("DBA") in the list. The value returned by the expression builder must be placed in the field_name variable in the function JoinFieldValue (minus the parentheses and quotes).

  Give it a shot and let me know how you do.
  Thom

• Custom due to the REST API objects

  I'm looking to create a custom through the other API object. Details of demand that I'm getting are as below:

  Publish

  https://www02.secure.Eloqua.com/API/rest/1.0/assets/customObject

  Body of the request:

  {

  'type': 'Objetpersonnalise ',.

  "name': 'prospecting."

  "description': 'customer prospecting."

  'fields':]

  {

  'type': 'CustomObjectField ',.

  'name': 'call Notes.

  'dataType': 'text ',.

  "defaultValue",:

  "displayType": "text".

  },

  {

  'type': 'CustomObjectField ',.

  "name': 'Date called."

  'dataType': 'date ',.

  "defaultValue",:

  "displayType": "text".

  },

  {

  'type': 'CustomObjectField ',.

  "name': 'call Status."

  "dataType': 'digital."

  "defaultValue",:

  "displayType": "text".

  }

  ],

  'uniqueCodeFieldId': '1000012.

  }

  With the above request, we are able to create custom object record fields, but there is no API for this field mappings. Missing something?

  In addition, we would like to know what mean the following in regards to custom objects.

  Display name field

  Unique Code field

  Email address field

  All entries on this would be very appreciated.

  I don't know if you're still trying to understand this point, but I thought I would answer because it took me forever to understand as well. I hope this will help someone in the future.

  It helps to understand that there are actually two pieces of custom objects.

  1) there are data that you pass - which you built above

  2) there is the mapping you will spend so Eloqua know what fields to custom object match what elements in your data

  The problem with custom objects, is that there is no easy way for Eloqua expose the fields in the custom object because they accept a naming convention. So instead of being able to map to the fields as {{Contact.Field (C_EmailAddress)}}, you must instead map to fields like this: {{Objetpersonnalise [23].}} Field [181]}}.

  To get the field mappings, you must actually understand the Objetpersonnalise id and send a request to Eloqua to retrieve the field mappings.

  You have to hit two end points to return the json representation of the Objetpersonnalise:

  (1) for a list of all CustomObjects: /API/bulk/2.0/assets/customObjects/

  (2) for fields in a particular Objetpersonnalise: /API/bulk/2.0/assets/customObject/23<- number="" of="" custom="" object="" (see="" #23="" in="" example="">

  Then you must use the values you get returned to set your mapping.

  For the second question, ask questions about these fields:

  Display name field

  Unique Code field

  Email address field

  You set those in the creator of Objetpersonnalise in E10. You map on them so that Eloqua knows how to connect your Objetpersonnalise to a contact.

  I think they map this way:

  Display name-> what you want to see the Objetpersonnalise as Eloqua (the title essentially)

  Field unique Code-> which is the unique id of the Objetpersonnalise (so you can update or add a new properly). In the example below, we use the Email address

  E-mail address field-> what is the email address so Eloqua can map the custom to a contact in the database object

  This is a mapping of the example. In the example below, I am mapping a single false value (lock_date) as well as salesforce id and the e-mail address of a custom object:

  {"isSyncTriggeredOnImport": true}

  'name': 'example Objetpersonnalise Sync ',.

  "fields": {"lock_date": "{{Objetpersonnalise [23].}}"} Field [195]}}', 'sfdc_id': ' {{Objetpersonnalise [23].}}. Field [190]}}', 'emailAddress': ' {{Objetpersonnalise [23].}}. Field [189]}}"},

  "updatedBy": "OurAPIUser",

  "uri": "/ customObjects/20/imports/332",

  "createdBy": "OurAPIUser",

  'identifierFieldName': 'emailAddress;

  'isUpdatingMultipleMatchedRecords': false,

  "updatedAt": "2014-09 - 12 T 15: 59:08.0699772Z.

  {"converted": "2014-09 - 12 T 15: 59:08.0699772Z '}

• Get the custom object Id 5 in URL

  Hello
  
  How can I get an Id value of 5 custom in a URL object?
  
  I get 5 name of the custom object using the % name CustomObject5%, but does not work with the % CustomObject5 Id %.
  
  My code is:
  
  & ServiceRequestEditForm.CustomObject5 name = % CustomObject5 name %.
  & ServiceRequestEditForm.CustomObject5 Id = % CustomObject5 Id %.
  
  Customize objects 1 and 2 works fine with:
  
  & ServiceRequestEditForm.Custom 1 = object name % 1 object name custom percent.
  & ServiceRequestEditForm.Custom object Id = 1% Custom object Id 1%.
  & ServiceRequestEditForm.Custom 2 = object name % name object custom 2%.
  & ServiceRequestEditForm.Custom object Id = 2% object Id custom 2%.
  
  Thank you.
  
  Published by: user13796387 on 03/15/2011 06:59
  
  Published by: user13796387 on 03/15/2011 07:38
  
  Published by: user13796387 on 03/15/2011 07:39

  Yes. Name, Id and Id integration external fields are available in the lay of the land. ID is not available.

  .

• Research Manager custom, caching of the «question»

  I have a custom research manager that is used on the attributes of qualitative research to provide a list of choices based on a SQL, other PLM objects. It works fine in that it shows the type of choice in the pop-up selection dialog box and fills the value of the attribute correctly when the user selects a choice and later when they consult the specification outside editing mode. The question that I am running is that, even if the result of changes to the search query, the available choices in the dialog box pop up (and those who are already related to attribute values) reflect not the updated values since they are apparently put cached after the first use of research (call AllLookupItems). The new values will be displayed after an IIS reset.
  
  Y at - there a way to force the cache for this choice list refresh every time the pop-up dialogue box opens, and also when PLM retrieves values from existing attributes by using the custom search when the specification is viewed? Potential impact of performance of database hits are included, I was wondering if this is possible.
  
  I appreciate all advice, thank you.

  The app updates cached custom within our service of extended attribute values of research manager.
  You can schedule a query cache to cache group dump "Extended attributes / Custom Sections ' which I think will purge your cached values.

• Menus custom objects

  I'm starting with custom objects, but the menu does not match other screenshots I've seen here on topliners. In the custom menu object, the only option is 'Search for custom object records' (see screenshot). Y at - it something I need to install or configure to use these, or am I just missing something?

  Well Yes, Michael is right – not everyone has CDO, according to your level of finish. If you are on Basic of Eloqua trim, then you need not CDO unless pay you extra. The cost for the extra features depends on the size of your database, so I would recommend reaching out to your ad

  Also, here is the list of features produced in case you need more information: Oracle Eloqua price | Marketing, management and integration costs. Eloqua Oracle products

• HTML links on custom object 10

  I try to include a link on my field of "ID" object custom tens in one State and get to the oracle page using the following link:
  
  @[HTML]
  (less than Sign) a href ="
  / OnDemand/user/CustomObject10.Detail?
  OMTGT = CustomObject10.Detail form
  & CustomObject10.Detail Form.Id = "@"
  target = "_blank" >
  "CustomObject10.Detail" < /a >
  
  However, the report displays 'CustomObject10.Detail' in the field 'ID' to report rather than the ID itself, and when I click on this link on the report I get "form error: no records available" on the custom object and the Contact object for some reason, I get "this operation is not allowed when there are no records displayed. Please run a query that returns at least one record or add a new record. (SBL-DAT-00215)
  
  Anyone know how I can fix my HTML code so that it goes to my folder of custom object? I tried to remove the "." Retail' from the code, but it pulls a broken link type browser window.
  
  Any help would be appreciated more than my business is in LOVE with custom objects!
  
  Thanking you in advance for your time.

  Your syntax should be something similar to this when you pass the ID of form as a link:
  '(less than Sign) a href = ' / OnDemand/user... ". FormID =' | ID | ".. . target = "_blank" > "|" "' name of column here. '(less than Sign) /a > '

  Its a concatenation of strings. The quotes in mind when using it.
  Personally, I think it's a syntax due to which error you logic does not work. Refine and it should work.

  Edited by: Max_Payne on September 11, 2009 08:07

  Edited by: Max_Payne on September 11, 2009 08:08

• API bulk: creating custom objects, fields, and lists?

  Hi all

  I have searched and passed through the ticket of support for routing, but have not yet managed to find an answer to this question, so I thought that maybe the people who write the API would be the best ones to talk to

  Anyway, in summary, my question is:-

  Is it possible to create lists of contacts, the Contact fields and items customized by using the bulk API 1.0?

  I know, it is possible to create new contacts and add them to an existing list, but I want to create a new list with the bulk API and then add my contacts on this new list.

  Same kind of thing for the Contact fields. I want to be able to check if there is a Contact field and if not create one and then fill in the import.

  Once again, even for custom objects. I know I can do a GET for all currently available Custom objects, but can I create a new using the API as a whole?

  Any help would be most appreciated.

  Thank you

  Hi Chris,

  You cannot create contact fields, shared lists or the custom objects through the bulk API (which in fact is a RESTful API), they must exist already.

  You can use the REST or lists The SOAP API to create only shared the REST API to create the contact fields, but SOAP or REST currently supports the creation of custom data objects.

  If you don't have it already, please take a look here, building on The Eloqua Platform - A Resource Guide and there REST API - Documentation for kernel objects that will hopefully more questions.

  T.J.

• Developer Mode error: outdated., the xxAM.xxVO1 view object contained no trace. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  Hi all

  I'm creating a Maunal search page.

  To do this, I created a view based on a custom display object.

  Page contains 2 parameters.

  If I give all settings and click the OK button.

  It gives the following error.

  Developer Mode error: outdated data

  
  

  This page contains outdated information. This error could have been caused by the use of the buttons of the browser (the browser back button, for example). If the browser navigation buttons were not used, this error may result from coding errors in the application code. Please check press the back button on the browser developer guide - view primary key object comparison section to review the main cause of this error and correct the mistakes of coding.

  
  

  Cause:
  The view BLTrinDisplayAM.ViewVO1 object did not contain any record. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  To visit, please click on the Home link at the top of the application page to return to the main menu. Next, go to this page using the app's navigation controls (menu, links and so on) rather than use the controls of the browser as rear or front.

  If I don't give any parameter and click go Button.The content of the view are displayed.

  So if I pass all parameters and click Go, then the corresponding record is displayed.

  Why, for the first time, if I give the parameter and click Go, obsolete data error is coming?

  Please help me.

  Grateful for your help!

  -Aren

  You use the object of the view for the search criteria and search results fields.

  I suggest you to remove references of VO fields of search criteria, item1 and item2.

  And in the event of the button 'Go' in the processFormRequest, get the criteria for field values entered by the user as below and run the object (ViewVO1) of the view by using these values.

  String buCode = pageContext.getParameter ("item1");

  String lsiCode = pageContext.getParameter ("item2");

  Thank you