Remove all Revel mobile library to the local library
Upoloaded total photo library by mistake to Mobile Album and can find no way to delete. Any suggestions?
If you have a few mobile albums you want only in the elements and you have already made mobile albums, there is a way of your choice. You can drag and drop a mobile album on a category of local services in the elements Organizer. Support in the mobile album is uploaded as it exists to Revel and stored locally. Subsequently, the downloaded media are removed of Revel. Here are some links that may interest you also.
Guinot
Reference elements Organizer:
http://helpx.Adobe.com/PDF/elements-organizer_reference.PDF
Set up your mobile albums in the elements:
http : / / tv.adobe. com / Watch/learn- Photoshop -Elements-12/Setting-up-your-mobile-albums/.
https://helpx.Adobe.com/elements-Organizer/using/access-media-using-re vel.html
Set up your mobile albums in Premiere Elements:
http : / / tv.adobe. com /Watch/learn-premiere-elements-12/setting-up-your-mobile-albums /
Tags: Revel
Similar Questions
-
This will remove all your custom settings and the settings of many extensions.
Hello
I was reading this article of knowledge and he says:
"This will delete all your custom settings and many extensions settings."
What are the custom settings?for example one of these and what else
bookmarks?
Add - ons?
Top toolbar - Customize the toolbar
Add on the toolbar
Firefox/preferences
Authorization Manager settings
the new page openCorrupted preference file
File preferences may be corrupt, Firefox prevents writing to it. If you delete this file, Firefox will automatically create another when it comes to.Here's how to delete the prefs.js file.
This will remove all your custom settings and the settings of many extensions.
Open your profile folder:In the menu bar, click the Help menu and select troubleshooting information. The troubleshooting information tab will open.
In the section the Application databases, click view in the Finder. It will open a window with the folder of your profile.
Note: If you are unable to open or use Firefox, follow the instructions for finding your profile without having to open Firefox.In the menu bar, click Firefox and select Quit Firefox
Locate the prefs.js file (and, if applicable, the prefs.js.moztmp file).
Delete these files and files prefs - n.js where n is a number (e.g. prefs - 2.js).
If there is, remove the Invalidprefs.js.
Restart Firefox. You should now have reset all preferences.Based on information from preferences not saved (mozillaZine KB)
See also http://kb.mozillazine.org/Profile_folder_-_Firefox
#1: there are too many pref for all kinds of adjustment which will offer a recipe of what you lose and how to keep certain parameters.
It is possible to copy specific lines of a prefs.js to this file in another profile or restore some settings after deleting this file in the current profile folder.All the prefs that show as a user defined and appear in bold on the topic: config page are stored in the prefs.js file.
This includes the changes you make and data Firefox itself and extensions store as data/parameters in a pref.
It's#2,3: the localstore.rdf file stores the toolbar configuration and other data.
#4: the current versions of Firefox shows the menu entry "Tabs" at the top menu ' display > toolbars "and" Firefox > Options ' and in the menus toolbar pop-up if the tabs are not in the default position on the top.
If the notches located on the top and the menu entry is not available and you want to move the tabs under the navigation toolbar, then you have to toggle the pref browser.tabs.onTop false on the subject: config page.
A restart of Firefox is necessary for updating the menu entry to display or remove.Note that this pref will no longer effect when the code Australis lands on the output channel (code Australis will probably land in Firefox 29).
#5: see https://support.mozilla.org/kb/Clear+Recent+History
Compensation of the "Site Preferences" clears all exceptions for cookies, images, pop-ups, installing the software, stored passwords in permissions.sqlite and other site specific data stored in content - prefs.sqlite (including zoom on the page).
Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception allowing you want to keep.
#6,7: history of search bar is the story of the search bar (Google) on the Navigation toolbar.
All recorded data to a form on a web page is included in the data in the form, but you can not separate and distinguish the two.
Browsing history is the history of the web pages you have visited.- Form history control: https://addons.mozilla.org/firefox/addon/form-history-control/
- Tahoe Data Manager: https://addons.mozilla.org/firefox/addon/data-manager/
#8: session cookies are always kept in memory and never stored on the disc in cookies.sqlite
You can only delete specific cookies manually in the Cookie Manager or leave cookies expire when you close Firefox to make them behave like session cookies.
Cookies of other compensation will include all cookies and don't obey the exceptions that you have made.#9
Data stored in storage DOM is not stored in cookies.sqlite, but it is generally stored in the webappsstore.sqlite file or possibly in the form of data in IndexedDB. -
List of all hosts in a Cluster, the Local single data warehouses
I had a few attempts but failed miserably.
Can LucD - you help maybe?
I just need to list each local VMFS Datastore and ideally have each size. The idea is to get this info in a separate calculation in a hash table, something like this:
@{N = "Datastore"; {E = {* list all the Local DS for the host that is currently being questioned and their respective sizes in here *}}
I hope I explained well enough...
Thank you very much!
Fjorko wrote:
Thank you
How can it be adapted to run only on the current host?
Using the option - Get VMHOST-store of data.
http://www.VMware.com/support/developer/PowerCLI/PowerCLI41U1/HTML/get-datastore.html
Concerning
-
How to remove all Xbox Music metadata from the clouds?
I experienced some problems with Xbox Music in all of my devices (Surface RT and Lumia 920), to do with duplication of the song, read errors, playlists appears not and so on.
'Luckily', my Surface RT walled up the other day, and my brand new replacement is underway, so I take the opportunity to reset my phone also, synchronize my collection of music from scratch (also goes to change my region Xbox to my current locale while I am).
Thus, with respect to any information library that currently exists in the cloud, how to remove, so I can start over?
Also, what sync options could recommend you on both devices, so I can have a smoother experience this time?
Thank you.
Hello
See if these solutions work for you.
http://forums.Xbox.com/xbox_forums/xbox_support/f/3144/t/406540.aspx
See the solution of Plantje dated date December 24, 2012
-
Removed all icloud photo library, 1.9 GB still in use
I deleted all of my photo, My Photo Stream etc. flows including shared library iCloud.
I have also ensured that the recently deleted album is empty. I disabled iCloud photo library on each device. It should not be a trace of left.
However, I always told my library back 1.9 GB of my storage iCloud. There is an option to turn it off completely but it will take 30 days, which is a long wait when I don't know if it will work.
Any ideas that he could be taking all this space? Or if there is a way to reset all empty without waiting for 30 days?
I use the latest version of iOS on my iPad and the iPhone, and the El Capitan on my Mac if that helps.
Have you tried to log in to your iCloud account, then sign in again?
-
Remove all effects of shading in the Illustration
In the image above, some paths have a sort of brush effect or an effect of shading (as evident in the path above). I wonder, how do I remove any effect it's all paths in the form above, I don't want it to be.
Thank you
Kiss
- Select a highlight (which you have pictured)
- Select > same > fill color
- Delete
Those do nopt resemble effects, but emphasizes hand drawn.
-
Does anyone know how to remove all words of 'copy' of the name line HAVE layers?
I downloaded a script PSD which automatically delete the word "copy" of all layers. Inside of GOT it, I can't do this. Can someone help me? Here's the script jsx PSD file:
----------
///////////////////////////////////////////////////////////////////////////////
Script name: RenameLayers.jsx
Version: 1.0
Date: 27/02/08
"Use: Removes ' copy 1, copy 2, etc." in the name of all the layers
///////////////////////////////////////////////////////////////////////////////#target photoshop
$.localize = true;
var displayDialogMode = app.displayDialogs;app.bringToFront ();
app.bringToFront ();
app.displayDialogs = DialogModes.NO;processObjects (app.documents processDocument, function () {alert ("you have no open documents")})
app.displayDialogs = displayDialogMode;///////////////////////////////////////////////////////////////////////////////
Function: processObjects
Use: Work theMainFunction on each object in the list theObjects
Entry: The list of objects (documents, layers, etc.), function to run on each object, function to run on parent, if there is no object
Return: value returned by the function used
///////////////////////////////////////////////////////////////////////////////
function processObjects (theObjects, theMainFunction, theAlternateFunction) {}
var returnValue = null;
If (theObjects.length == 0) {}
If (!) () theAlternateFunction == undefined) & &! (theAlternateFunction == null) & &! (theAlternateFunction == "")) {
returnValue = theAlternateFunction (theObjects.parent);
}
} else {}
If (!) () theMainFunction == undefined) & &! (theMainFunction == null) & &! (theMainFunction == "")) {
for (var i = theObjects.length - 1; i > - 1; i--) {}
returnValue = theMainFunction (theObjects [i], i);
}
}
}
return returnValue;
}///////////////////////////////////////////////////////////////////////////////
Function: processDocument
Use: Treat the layers in the document with the function 'processLayer '.
Entry: Document subject of Document index object
Back: no
///////////////////////////////////////////////////////////////////////////////
function-processDocument (objectRef, i) {}
app.activeDocument = objectRef
processObjects (objectRef.layers, processLayer, null);
}///////////////////////////////////////////////////////////////////////////////
Function: processLayer
Usage: Delete "copy" of the name of layer (Layer content Set of processes)
Entry: Object layer Layer object index
Back: no
///////////////////////////////////////////////////////////////////////////////
function processLayer (objectRef, i) {}
If (objectRef.typename == 'LayerSet') {}
var layerCount = processObjects (objectRef.layers, processLayer);
}
renameLayer (objectRef)
Returns 0
}///////////////////////////////////////////////////////////////////////////////
Function: renameLayer
Usage: Delete "copy" of the name of layer (Layer content Set of processes)
Entry: Object layer Layer object index
Back: no
///////////////////////////////////////////////////////////////////////////////
function renameLayer (objectRef) {}
var theRegEx = new RegExp (/ (\s*copy\s*\d*) + $/)If (theRegEx.test (objectRef.name)) {}
Save the State of the layer (visible or invisible)
var layerVisible = objectRef.visible
var numero_index = 0
numero_index = objectRef.name.indexOf ("copy")
objectRef.name = objectRef.name.substr(0,indexnumber)
objectRef.visible = layerVisible
}
Returns 0
}
----------Anyone?
I wrote the original code you have several years ago, I did a quick check and if you change the first lines of what follows, it should work:
#target illustrator
$.localize = true;
var displayDialogMode = app.displayDialogs;app.bringToFront ();
app.bringToFront ();
app.displayDialogs = DialogModes.NO;processObjects (app.documents processDocument, function () {alert ("you have no open documents")})
app.displayDialogs = displayDialogMode;The code has been mistake out on the lines that changed the displayDialogMode and who brought the application forward, so I have commented out them. I don't have time now to see that needs to be done to ensure that this work (if they can), but it should work for you.
-
My FF browser was weird, so I did a Reset. My whole FF Ftp program has been removed. I installed the addon FF Ftp after the reset. I need to know how to return the file fireFTPsites.dat from the folder "Old data Firefox" browser worm FF 26. I have the latest version of FF on my windows xp desktop.
Unfortunately, I don't have a master list of my client user ftp & pws.
I am a novice. I read everything that in the Support section and really need help on how to get ftp info in the folder of old data from FF and get this info usable FTP again. Thank you.
I think you should copy these 3 files from your old profile folder to the current.
- fireFTPsites.dat
- signons3.txt
- signons.SQLite
The second and third files are your saved passwords. Note that replace your current signons3.txt and signons.sqlite files will replace any password that you have registered in your profile.
To open your active profile folder, you can use either:
- Help > troubleshooting information
- type or paste everything: in the address bar and press Enter
Then in the first table, click on the view file"" button. Keep this folder open, switch to Firefox and the output.
Copy the 3 files from the old profile on your desktop folder in your new folder. Make sure that you do not copy the other way, for obvious reasons!
Then restart Firefox. Success?
-
How to remove all the settings for one user Lightroom reset
Hi allWhen I decided to reinstall Lightroom 6, I also decided to take this opportunity to remove all my previous settings of the user. I know that some of the tasks that I have to do to get there and I'm listing below; I'm not sure if I missed something. So, please can I ask if you could think of something to add?-Remove preferences during the uninstallation of Lightroom-Go to the folder C:/users/xxx/photos/Lighroom and delete the catalog file-Delete the folder found within this same filepath-Go in C:/users/xxx/AppData/Roaming/Adobe/Lightroom/develop Presets/user Presets and delete all the files it-Go in C:/users/xxx/AppData/Roaming/Adobe/Lightroom/Import Presets/user Presets and delete all the files it-Go in C:/users/xxx/AppData/Roaming/Adobe/Lightroom/Export Presets/user Presets and delete all the files it-Go to Presets C:/users/xxx/AppData/Roaming/Adobe/Lightroom/metadata and delete all the filesThank you!Hi ninou Reyes.
Check if you have all left overs in those folders below
- C:\Program Files\Adobe - Lightroom
- C:\Users\xxx\AppData\Local\Adobe - Lightroom
- C:\ProgramData\Adobe - Lightroom
- C:\Program Files\Fichiers Adobe - Lightroom
Concerning
Rohit
-
Sometimes, I want to delete cookies that accumulate from a specific Web site, so I use the search bar. If 'remove all cookies' is clicked after the search bar using, only those who remain the search will be deleted, or will be deleted all cookies - including those outside the research -? Thank you.
Using Firefox 27.0.1
I tested it, and only the cookies that show in the result window are deleted if you click on delete all Cookies.
Clear the search bar through the icon on the far right, showed that other cookies are still there.Note that it is generally safer select all cookies that you want to delete and press the DELETE key or click Remove Cookies to avoid deleting all cookies.
-
all my data records on the local disk c, how to share the data with the other drive, local drive d.
Hi Jasonbichard,
1. what type of drive is D? Is - this another partition on the same disk?
2 Windows operating system you are using?
You can change the location of the disk to save the data in the d: instead of C: and check if it helps.
a. navigate to the location (username) C:\Users\.
b. right click on the folder that you want to change the location, and then select Properties.
c. click on the location tab and change the location to D: drive.d. click on apply and Ok.
-
Satellite M40x - recovery disk removes all partitions?
Hello
The new Toshiba satellite M40X I bought about 5 years and it came with the recovery disk. Now my system is slow and reflection on the running on it recovery disk.
When I bought the system I think she only had one C: drive and later I partition on three discs. Now, I want to know that if I run the recovery on my laptop disk then it would remove all partitions because I took the backup of the c: only?
Thank you
Hello
If you run a recovery of all data on local disk c and D; you be wiped. Thus, you must back up the important data before you start
-
Client remote access VPN gets connected without access to the local network
: Saved
:
ASA 1.0000 Version 2
!
hostname COL-ASA-01
domain dr.test.net
turn on i/RAo1iZPOnp/BK7 encrypted password
i/RAo1iZPOnp/BK7 encrypted passwd
names of
!
interface GigabitEthernet0/0
nameif outside
security-level 0
IP 172.32.0.11 255.255.255.0
!
interface GigabitEthernet0/1
nameif inside
security-level 100
IP 192.9.200.126 255.255.255.0
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
nameif failover
security-level 0
192.168.168.1 IP address 255.255.255.0 watch 192.168.168.2
!
interface Management0/0
nameif management
security-level 0
192.168.2.11 IP address 255.255.255.0
!
passive FTP mode
DNS server-group DefaultDNS
domain dr.test.net
network of the RAVPN object
192.168.0.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.200.0_24 object
192.168.200.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.9.200.0_24 object
192.9.200.0 subnet 255.255.255.0
the inside_network object-group network
object-network 192.9.200.0 255.255.255.0
external network object-group
host of the object-Network 172.32.0.25
Standard access list RAVPN_splitTunnelAcl allow 192.9.200.0 255.255.255.0
access-list extended test123 permit ip host 192.168.200.1 192.9.200.190
access-list extended test123 permit ip host 192.9.200.190 192.168.200.1
access-list extended test123 allowed ip object NETWORK_OBJ_192.168.200.0_24 192.9.200.0 255.255.255.0
192.9.200.0 IP Access-list extended test123 255.255.255.0 allow object NETWORK_OBJ_192.9.200.0_24
pager lines 24
management of MTU 1500
Outside 1500 MTU
Within 1500 MTU
failover of MTU 1500
local pool RAVPN 192.168.200.1 - 192.168.200.254 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 66114.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) source Dynamics one interface
NAT (it is, inside) static static source NETWORK_OBJ_192.9.200.0_24 destination NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.9.200.0_24
Route outside 0.0.0.0 0.0.0.0 172.32.0.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 0.0.0.0 0.0.0.0 outdoors
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
Terminal registration
name of the object CN = KWI-COL-ASA - 01.dr.test .net, C = US, O = KWI
Configure CRL
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.9.200.0 255.255.255.0 inside
Telnet timeout 30
SSH 0.0.0.0 0.0.0.0 management
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 66.35.45.128 255.255.255.192 outside
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 30
SSH version 2
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
internal RAVPN group policy
RAVPN group policy attributes
value of server WINS 192.9.200.164
value of 66.35.46.84 DNS server 66.35.47.12
VPN-filter value test123
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value test123
Dr.kligerweiss.NET value by default-field
username test encrypted password xxxxxxx
username admin password encrypted aaaaaaaaaaaa privilege 15
vpntest Delahaye of encrypted password username
type tunnel-group RAVPN remote access
attributes global-tunnel-group RAVPN
address RAVPN pool
Group Policy - by default-RAVPN
IPSec-attributes tunnel-group RAVPN
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory 2
Subscribe to alert-group configuration periodic monthly 2
daily periodic subscribe to alert-group telemetry
aes encryption password
Cryptochecksum:b001e526a239af2c73fa56f3ca7667ea
: end
COL-ASA-01 #.
Here is a shot made inside interface which can help as well, I've tried pointing the front door inside the interface on the target device, but I think it was a switch without ip route available on this subject I think which is always send package back to Cisco within the interface
Test of Cape COLLAR-ASA-01 # sho | in 192.168.200
25: 23:45:55.570618 192.168.200.1 > 192.9.200.190: icmp: echo request
29: 23:45:56.582794 192.168.200.1.137 > 192.9.200.164.137: udp 68
38: 23:45:58.081050 192.168.200.1.137 > 192.9.200.164.137: udp 68
56: 23:45:59.583176 192.168.200.1.137 > 192.9.200.164.137: udp 68
69: 23:46:00.573517 192.168.200.1 > 192.9.200.190: icmp: echo request
98: 23:46:05.578110 192.168.200.1 > 192.9.200.190: icmp: echo request
99: 23:46:05.590057 192.168.200.1.137 > 192.9.200.164.137: udp 68
108: 23:46:07.092310 192.168.200.1.137 > 192.9.200.164.137: udp 68
115: 23:46:08.592468 192.168.200.1.137 > 192.9.200.164.137: udp 68
116: 23:46:10.580795 192.168.200.1 > 192.9.200.190: icmp: echo request
COL-ASA-01 #.
Any help or pointers greatly appreciated, I have do this config after a long interval on Cisco of the last time I was working it was all PIX so just need to expert eyes to let me know if I'm missing something.
And yes I don't have a domestic network host to test against, all I have is a switch that cannot route and bridge default ip helps too...
Hello
The first thing you should do to avoid problems is to change the pool VPN to something else than the current LAN they are not really directly connected in the same network segment.
You can try the following changes
attributes global-tunnel-group RAVPN
No address RAVPN pool
no mask RAVPN 192.168.200.1 - 192.168.200.254 255.255.255.0 ip local pool
local pool RAVPN 192.168.201.1 - 192.168.201.254 255.255.255.0 IP mask
attributes global-tunnel-group RAVPN
address RAVPN pool
no nat (it is, inside) static source NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.168.200.0_24 static destination NETWORK_OBJ_192.9.200.0_24 NETWORK_OBJ_192.9.200.0_24
In the above you first delete the VPN "tunnel-group" Pool and then delete and re-create the VPN pool with another network and then insert the same "tunnel-group". NEX will remove the current configuration of the NAT.
the object of the LAN network
192.168.200.0 subnet 255.255.255.0
network of the VPN-POOL object
192.168.201.0 subnet 255.255.255.0
NAT (inside, outside) 1 static source LAN LAN to static destination VPN-VPN-POOL
NAT configurations above adds the correct NAT0 configuration for the VPN Pool has changed. It also inserts the NAT rule to the Summit before the dynamic PAT rule you currently have. He is also one of the problems with the configurations that it replaces your current NAT configurations.
You have your dynamic PAT rule at the top of your NAT rules currently that is not a good idea. If you want to change to something else will not replace other NAT configurations in the future, you can make the following change.
No source (indoor, outdoor) nat Dynamics one interface
NAT source auto after (indoor, outdoor) dynamic one interface
NOTICE! PAT dynamic configuration change above temporarily interrupt all connections for users on the local network as you reconfigure the dynamic State PAT. So if you make this change, make sure you that its ok to still cause little reduced in the current internal users connections
Hope this helps
Let me know if it works for you
-Jouni
-
Install lr on and external hard drive or on the local drive?
Hi again.
Someone at - it thoughts on installing the LR2 program on an external hard drive to store all the pictures and projects about it too so. If you do this you just plug the external hard drive into any pc or laptop and have your program and photos with you, even when you're traveling? If I had to do this where would be the best place to put a back up of all my work to? the local drive or dvd? Ive not heard of people doing this, so I wonder if this isn't a good way to do. Most often, I hear of just using the external dirve for one rear device.
Thanks for any ideas
Randy
Yes, in the application of the LR of the internal (boot-generally that it is starting, which is) is the way to go. There is little difference in safety if your images and your catalogs are on an internal or external: you must have a backup of the image and the .lrcat files. It is much easier on the hard drives on removable media.
-
I tried several times and it does not recognize my master password. In fact, I had a similar problem with the usual password before going with the master.
If I reset the 'master' password, I need to know that it will not erase all of my passwords where I use them as ebay, Apple, or emails. I don't want to be locked off sites or the loose them on this computer.
When you say that it removes all, do you mean just the ones that I entered for firefox? WHAT DO YOU MEAN IT WILL REMOVE ALL? from my computer?CAUTION: Resetting your master password will remove all of your saved usernames and passwords.
In the Firefox location bar, enter the following location: chrome://pippki/content/resetpassword.xul Press Return. The "Reset Master Password" page will appear. Click the Reset button, to reset your master password.
reset master pw fx29
Yes, resetting the master password or removing signons3.txt will remove all the password stored in the password manager.
If you use time Machine, and then try to restore the files logins.json and key3db of this backup in the event that you do not forget the MP, you have used in the past.
Make a backup of the latest version of these files.
You can use this button to go to the current Firefox profile folder:
- Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
- http://KB.mozillazine.org/Profile_folder_-_Firefox
Maybe you are looking for
-
I need to update my graphics but what to do
I recently bought a new hp G5460uk desktop computer and later realized I needed high grade of the graphics card I'm going to have a duel monitor setup as well as running games on it, but I don't know where to start please help I would like rearly apr
-
HP 6830 all-in-one: 6830 all-in-one
I bought a new 6830 at Best Buy only to have a problem of print head in February 2016 after only a month of 4 or 5. I was sent to a renovated (replacement) printer. It worked fine until yesterday (June 17, 2016) only 4 months. I unplugged the prin
-
If I delete an email address influence other programs implemented underr that meet?
like facebook, I get unwelcome email
-
Visual Land V-Touch 4 GB Media Player
Sorry to tell you but this device does not work with 64-bit / windows vista, I can't sync with my media player at all and it syncs with eMusic where I get my downloads. Thank you Marlene Cohely
-
How to set the transparent color in the BitmapField?
I display some Bitmap using BitmapField, to create a screen as our Office Windows means icons followed by the name of the application. When I first time poster main screen it seeks it is transparent, but when I move the focus from one Bitmap to anoth