Replace the elements of vertex

Similar Questions

• How to replace the element on the page master on master spread [JS CS5]

  Hi all

  There is a big media (scripts) on how to replace the element template on a page of a specific document, but my problem is, I've added new Master spread based on a further propagation where newly added distributed Master I need to replace all the elements to master basic page.

  pageItems [curPageItem] .override (destinationPage)

  works well if you replace the elements of master page on the pages of a document, but what works for replace page elements master master page for example

  pageItems [curPageItem] .override (destinationMasterPage)

  Thank you

  Mac

  Similar code worked for me (in CS4 - the machine, I had very practical is the one I use to accompany clients on older versions). Are you sure that your destinationMasterPage is a page and not a spread? This would cause a failure.

  Dave

• 'Replace the element of the array' replaces not only indexed items

  Hey masters LabView,.

  Fairly new to Labview and I'm trying to sort out how to create a table of images. I know that the total number of images I want in my 'stamp' (not the buffer of LabView), so I'm the initialization of an array of this size. Can I bring this table in a loop For with a shift register, and I want to capture images and write them in the table of the buffe continuously (a comment: I do a circular buffer, but I don't want to implement in LabView, because there a lot of things that I don't need and I will eventually have to the process to be as thin as possible).

  Here's the problem (I assume an implementation, that does not decompose LabView):

  I expect:

  AN element of the array, in the position indicated by the index of the loop [i], is replaced by the image newly caught

  I get:

  All THE elements of the array becomes the image newly caught.

  (I can tell because I taste under the table, grabbing a single image from a constant "Check Array" index - may 7, for example.) But my index of the loop [i] value is 13, and the subsample becomes again the image newly caught.

  What a ridiculous thing I am doing wrong?

  Any help would be greatly appreciated.

  

  Ah, I just noticed something.  Initialize you an array of references at the beginning of your program, but it is a complete picture OF THE SAME REFERENCE: you must call the IMAQ Create in a loop so that you actually get unique references in your table.  You must have a different NAME for each image.

• How to replace the element in the cluster in a table?

  Hello

  I understood better choice is to initialize the array first and replace the items in a table instead of insert the new item in a table for example in a while loop.

  So I started to evaluate since I asked where I want to read a lot of measures from a txt file and display them in a XY Chart. XY graph must show Y value and corresponding value X is red if it is out of reach and green if it is in range. I found a solution to do it with an array of clusters.

  In the attached example, I have represented two different methodologies. My problem is that a superior solution does not display the contents of all measures. Can someone tell me what I am doing wrong?

  Kind regards

  Petri

  I changed your VI top so that it works. Please take a look and see what I've done. It is also much faster.

• Replace the Macro Code

  I have about 60 web pages all containing multiple instances of the same table. I am updating this table of a CSS type and want to program a macro to find and replace the elements of the array in each web page.
  
  I tried to record the commands, but for some reason, all simply, it won't work (I cut and past the search text to and run replace them the function in the page) every page on which I work has multiple instances of the same table - all identical.
  
  Is it possible to write a macro for this?
  
  Here is an example (one piece) of what I'm trying to do:
  
  Replace the following HTML Code:
  
  < table width = "90%" border = "1" cellspacing = "0".
  CellPadding = "2" align = "center" >
  < tr bgcolor = "#FFFF66" >
  < td width = "72" height = "22" >
  < div class = "c8" >
  < strong > < facilities > Standard
  < / div >
  < table >
  < td = "22" height >
  
  With
  
  < div align = "center" >
  < table class 'standard' = >
  < class tr = "top_row" >
  < th > standard: < /th >
  < td >

  When you open find it and replace the installation program, you can select a search at the site level.
  I recommend you read the F1 help on the use of this facility first.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "JGreg7" wrote in message
  News:g0klck$KJV$1@forums. Macromedia.com...
  > I thank you all for your comments.
  >
  > Forgive my ignorance, I never had the opportunity to do before.
  >
  > How can I tell dreamweaver to browse all the files at once?
  > They
  > are all in the same directory.
  >
  >
  >

• How to replace (assign) a part of the elements of an array in TestStand?

  Hello

  I would like to replace or assign values to the elements of an array.

  For example, I have a local variable with 6 elements, Locals.A = {1, 2, 3, 4, 5, 6},

  and I would do it is {1, 2, 13, 14, 5, 6}.

  Accordingly, I add an expression and write "Locals.A [2.3] = {13: 14}", but it failed.

  Is it possible to replace a part of a painting?

  My real question is I want to pass parameters to a sequence to a local variable of the MainSequence, like the picture as an attachment.

  I hope that I can assign the parameter (table 5 elements) for the range of 5th to 9th item of the local Variable.

  Could someone give me any suggestions? Thank you very much!

  

  (1) I meant move the entire table and in the subsequence programmatically update only a subset of the items.

  For 1 or 2, you'd have to write a loop as interates on and updates the items that you are interested in. There is no simple syntax that will do what you want. You can use a loop but, rather than make a statement of entitlement for each item.

  -Doug

• Replace the configuration of the plugin apps config.xml element

  One of the plugins that I use has the following config: https://github.com/katzer/cordova-plugin-local-notifications/blob/master/plugin.xml

  One of the sections in there is:

  < target = "AndroidManifest.xml configuration file" parent = "/ manifest" > ""

  < android:name = "android.permission.RECEIVE_BOOT_COMPLETED permissions uses" / > "

  < android:name = "android.permission.WRITE_EXTERNAL_STORAGE permissions uses" / > "

  < / config-file >

  I would replace this is:

  < target = "AndroidManifest.xml configuration file" parent = "/ manifest" > ""

  < android:name = "android.permission.RECEIVE_BOOT_COMPLETED permissions uses" / > "

  < android:name = "android.permission.WRITE_EXTERNAL_STORAGE uses-permission" android: maxSdkVersion = "18" / > "

  < / config-file >

  This is because I understand that permissions are not forced to write to the external storage of your application from KitKat (4.4) (https://developer.android.com/guide/topics/data/data-storage.html#AccessingExtFiles), and I want to ask this permission is turned off for users to download the application.

  I build my app using PhoneGap Build (phonegap-version is cli - 6.3.0), is there any way of this from my apps config.xml file? So far I have tried several things led to errors on malformed or duplicate < uses credentials > elements config.

  Thank you

  Here are a few possibilities:

  1. The plugin of the fork and edit as you like and build from your fork (see the documentation for the use of rest git plugins: Plugins |) PhoneGap Docs).
  2. The plugin of the fork, edit and send a request to shoot for having him up-to-date on the repo of NPM (1 or 2).
  3. Try to use the element of the BMPS config file to change the manifest: change manifest. PhoneGap Docs (do not know if it will work in this use case).

• Value of the element after replacing the automated process of line does not?

  Greetings!

  I have a standard process of line automated filling in the fields on my current form after the header. Certain values that I need to replace by calculations from the data in other tables. If right after the line, I inserted another process for this. The results are actually stored in the database, but does not reach the customer. Why? Somehow it seems, once the line is completed, the html elements are not affected more during the processing of the page.

  So I resolved to set certain values with a call ajax after the page is loaded, but which actually is not the best way to do this.

  In coordination with the question: what is the difference between the headings of before and after? I looked in the documentation, but wrong in details. Myself I havn't found no difference between the two.

  I hope you can help me get clarity on who and how to implement the calculation as well as the shape of line.

  Thanks a lot and best regards,

  Tobi

  Hi TobiP,

  If your item has as the Type of Source database column, and I think you do since your using an automatic process of line Fetch, in the properties of the element, you'll find a region called 'Source '. If the Source value or expression is not null and the Source is set to "Always replace the value that exists in the session state", then the value of the source will be taken from what you put as the source and ignore session state values defined by other processes. Assign to this "only when there is zero current value in session state" to use the session as a source value.

  Kind regards

  Joni

• Replacing the drive HARD on Portege R700

  Hello

  I just ordered a R700 and hope to upgrade the HARD drive of 320 GB for one SSD OCZ Vertex 2.
  Is it easy to replace the hard drive in the R700? Should I remove the keyboard is a Panel on the back?
  What size hard disk will - 2.5 "or 1.8"?
  A SSD will be simply connect using existing connections, or something else there?

  See you soon.

  According to the specifications of the laptop Portege R700 has 2.5 HARD drive is HDD with SATA interface, so I think that you should order 2.5 SSD with standard SATA connectors.

  HARD drive is placed on the bottom side near the cooling vent and it is fixed with a screw only.

  Remove the screws and HARD drive. You will see how the HARD disc is placed and how it must be removed.
  It's very simple and you can do it alone.

• Replace the iTunes from Mac to another folder and make it synchronize with the iPhone?

  I copied the iTunes folder full of an iMac of El Capitan 2013 a 2015 running iMac running a little newer version of El Capitan. I want to replace the iTunes folder on the new Mac with my backup and everything on the new Mac to work as it did on the old, well that the old iMac and a new have different names, I do not know if what counts.

  1. my entire library of music appear and be available after replacing the files?

  2. home sharing with all my devices work after replacing the files?

  3. what happens with my iPhone and iPad that already synced with my old iMac? Will they continue to synchronize on the new iMac, as I replaced the entire folder?

  4. are there any other questions or things that I need to address with what I do?

  Thank you!

  1 Yes

  2. no doubt. If this isn't the case, you may need to reconfigure. I don't know exactly where these settings are stored.

  3. Yes

  4. nothing much as your installation is as described and the entire library is stored in the iTunes folder. Some elements used in iTunes related activities are not stored in the iTunes library folder, but in special folders.  If you move a library to another computer, you can copy these too:

  -Music Apple file cache: http://dougscripts.com/itunes/2015/09/new-flush-apple-music-cache-files/

  -device iOS, various preferences files backups: https://discussions.apple.com/thread/3285925

• How do you replace the values in a control of the ring?

  Hello

  I have a control of the ring (text values) in Labview 2009 and it is populated by programming with 20 points. The end user selects from the list items or fills with a new item based on a checkbox to add a new item. What I want to do, that's when section 20 is entered and the user selects the check box next to the point 21 to add I want around rap on the first item in the list and crush him. Is this possible and a sample VI would be great demonstrate how this is done. Any help would be greatly appreciated!

  Thanks in advance

  Charlie

  Replace the subset of the table.  You need to keep track of the element to replace in a shift register.  I would also like to keep the list in a shift register to make your life a little easier.

• How to replace the SCXI-1600?

  Since our IT obliges us to switch to Win7, 64-bit edition, our SCXI-1600 becomes unnecessary because there is no 64 bit driver (Sidenote: the device is still available in the online catalog without obvious by the lack of such a driver warning). in an another tread on this subject, Seth_B advise

  For example, the USB-6251 device mass termination that provides 5 x faster sampling with 7 x better accuracy, USB 2.0 transfer speeds of data transfer more reliable and is only about $300 more including the cable between the DAQ hardware and the SCXI chassis.

  I need more information - I don't understand how exactly who will replace the SCXI-1600 as a connection to the SCXI block, for me, it looks like an ordinary e/s USB device must connect directly to several types of e/s analog and digital through a CBS. What cable should I connect the chassis SCXI containing other maps, how she will turn upward in MAX - in short: I need to decide if the replacement is more trouble with respect to particular software rewriting labview and other efforts that fight OUR guys to keep the System 32 bits for this testbed.

  Hello MBohnet,

  To avoid work or acquisition of new equipment on your part then I would recommend against your IT Department to maintain 32-bit system.

  If you need to upgrade to Windows 7 64 bit then the 6251 is an option at your disposal to communicate and scanning information of you modules SCXI.

  There are steps for setting this up

  1. Remove the 1600 chassis.
  2. Fix a module SCXI-1349 in the back one of the SCXI modules. Then use an SH68-68-EPM cable (the cable is listed on the pricing for the device 6251 tab) to connect the SCXI-1349 module to the PCI-6251.
  3. Your configuration in Measurement & Automation Explorer would be alike in what concerns the addition of your device, but you will point to the 6251 as the digitizer.
  4. The quote above regarding the (5 x faster sampling rate) applies only when using the USB-6251 in parallel mode.
  5. You wouldn't have to make changes to code with switching on the material element.
  6. Also, if you are not connected to the USB take a look at the PCIe-6320 or PCIe-6341 with the SHC-68-68-EPM cable. They are less expensive than the USB-6251 housing alternatives.

  Kind regards

  Izzy O.

  Technical sales engineer

  National Instruments

  www.NI.com/support

• Great picture 'In Place Struct' or 'replace the item.

  Hi community

  I have a basic question about performance and memory allocation.

  In the past we sometimeise dealed with corresponding "memory full error" massage and a labview crash.

  These are generally produce on relativley applications of long duration with a frequency of fast acquisition.

  Typical data rate is about 100000 SGL numbers by up to 50ms.

  As it seemed that the reallocation of the elements of an array may be the reason of the chrashes we use extensively now it the structures in PLACE to manipulate the table of pre initialized.

  Here's my question.

  Y at - it a general rule when it is best to replace a subset of the table by the function of the subset to replace LV or is it better to do a few large loops as shown in my code for replacements.

  Personally, I'm worried about these loops (or ist is just OK) and the compiler is able to optimize these things.

  Please indicate on these two topics---> CPU usage

  ---> Memory management issues

  Thanks in advance

  See you soon

  Gernot

  Just use replace table subset.  It is a unique function that does what you want.  And does it in place (no reallocation of memory).  It is also likely (cannot say with certainty) that it run faster that the Structure element inside a FOR loop.

• Replace the subset of table operation

  I have a code to a key VI event down that toggles the visibility of some indicators in response to press the function keys. Records using Boolean shift, the code worked with a few indicators.

  To scale to a large number of indicators, I decided that I would need convert a registry to offset single Boolean array.

  With the shift table Boolean register, for a given function key, the code reverse the Boolean value of the table for the property node Visible, then replaces the same item in the table of Boolean with the inverted Boolean value. The code does not work. Once the indicator is visible, he won't go invisible on the next push of button.

  I watched the execution, display values. Looks like that replace it table subset VI is not replace the Boolean value with the updated value. In the attached screenshot, you can see where I got the element of the array once it has been "updated" to replace table VI of subset. Impossible to find all the bugs in the list of bug LV2013.

  See the attached screenshot. What's wrong with this code? My apologies for the resolution of the screen capture. If necessary, I'll go back to the lab and try to capture a screenshot of higher resolution.

  On-screen turned your empty Boolean arrayis, in other words, it has no elements. Subset of the table Replace does not work with an empty array.

  See you soon,.

  McDuff

• Best way to initialize a queue with the elements of the array

  Hi guys

  I'm looking for a bit of performance optimization...

  I'm developing an application of measure of noise using LV8.6 and Win Xp /Win 7.

  To say things very simple, I have a loop that samples and a loop that does the calculation. data are shipped in a queue waiting, producer / consumer lifestyle.

  So far so good.. It is - is there a specific and more optimized way to declare this queue?

  I was wondering if the notifier queue with an initialized in fixed size array element (the number of samples PR. read sound card will be known at run time) would produce a line which would be less burdensome on the dynamic memory compared to an allocation obtained using a simple queue control no value.

  I have attached a copy of Θcran to maybe make the most obvious question...

  I've been thru "clear as mud" thread, as recommended in other threads that covers this topic - but I get very high-tech, and I lost my way into it so... If you are looking for a more simple "you must use the #x solution, because...". »

  Thank you in advance.

  H ha wrote:

  you use solution # 2 because the initialization of an array first and by replacing its elements allocates any memory needed both as opposed to reorganize the memory as the table grows in size.

  That your response has to do with a queue?

  Using the option 2 is not a thing about creating a queue with a fixed number of items. Either you start with an empty queue. If you used a constant empty table with option 1, then this would require less memory in the VI himself. If you want to set the size of the queue, thread of something of this entry.