report of treatment of form

Similar Questions

• ImageToArray function sometimes reports valid entry in form "no image".

  ImageToArray function sometimes reports valid entry in form "no image".

  Nothing in this image that ensures the Image in table VI will run before the close VI. It may look like you it requires much more code, so expect that he would go first, but apparently, the VI which releases the reference runs before the Image in table VI. Again, you must note the picture wire does not the image itself - it is a pointer to the image, in order to destroy the image means that you cannot access.

  If the Image in table VI has error I/O, using it to forcing him to run before the close VI. If it is not the case, you can use a flat sequence structure.

• report for the current form

  Hi all
  I want to report for my current form, and I use form 6i
  
  for example I form, which depend on the table and I want to make the button to report for the active form which show some of the field in the table
  Best regards to all members here
  Yasser

  Hello

  If please create when-pressed to release button and use the following code.

  declare
  v_plist_id paramlist;
  pl_name varchar2(50) := 'rep_params';
  
  begin
  v_plist_id := get_parameter_list(pl_name);
  check_param_list (pl_name); --Check availability of paramlist and
  destroy is present
  
  --When the parameter list already exists it needs to be distroyed first
  if not id_null(v_plist_id) then
  destroy_parameter_list(v_plist_id);
  end if;
  
  v_plist_id := create_parameter_list(pl_name);
  
  add_parameter(v_plist_id, 'P_1', text_parameter, :block_name.item);
  -- input parameter
  add_parameter(v_plist_id, 'PARAMFORM', text_parameter, 'NO'); --
  suppress the display of the Reports p-form
  add_parameter(v_plist_id, 'DESTYPE', text_parameter,
  :control.dest_type); -- set file destination type
  add_parameter(v_plist_id, 'DESNAME', text_parameter,
  :control.dest_name); -- set file destination name
  add_parameter(v_plist_id, 'DESFORMAT', text_parameter,
  :control.dest_format); -- set file destination format
  
  -- call reports
  run_product(reports, 'reports_file', asynchronous, runtime,
  filesystem, v_plist_id, null);
  end;
  

  Sarah

• Calculations in APEX 4.2 on the interactive report and the update form

  Hello

  I know that people have asked similar questions, but I was not able to do this work. I'm doing some fairly simple math (addition, multiplication) in an application. I have 2 fields (VALUE_A, VALUE_B). I can get the addition and multiplication work in the interactive report, but I also need that it works correctly in the form of update. I also need update form to work dynamically so that if the values are changed, the correction calculated response is shown immediately on the update form and then reflected in the interactive report. I tried the dynamic action, with and without javascript without result. Any help would be appreciated.

  Request Express 4.2.6.00.03

  model application:

  https://Apex.Oracle.com/pls/Apex/f?p=82162:

  username: guest

  password: Peanut123

  Thank you

  Rachel

  ADD dynamic action

  After refresh of region

  Set value

  ELEMENT the VALUE to change

  check the fire on the load

  To source, use expression JavaScript

  If ($v ("P2_TEST_1")! = null & $v ("P2_TEST_2")! = null)

  {

  parseInt ($v ("P2_TEST_1")) + parseInt ($v ("P2_TEST_2"));

  }

  ElseIf ($v ("P2_TEST_1")! = null & $v ("P2_TEST_2") == null)

  {

  parseInt ($v ("P2_TEST_1"));

  }

  ElseIf ($v ("P2_TEST_1") == null & $v ("P2_TEST_2")! = null)

  {

  parseInt ($v ("P2_TEST_2"));

  }

  on the other

  { 0; }

  That add another dynamic action on change POINT P2_TEST_1 and set even with the same expression JavaScrit action. but NOT fire on the load
  Do the same for the ARTICLE P2_TEST_2

  And the same for A times B but change + to *.

  Here, I did samples for you with this code.

  https://apex.Oracle.com/pls/apex/f?p=83519 demo/demo

• Reports 6i called from Forms 6i, on Windows 2008 (R2) 64-bit

  I installed 6i forms and reports (6.0.8.26.0) on a 64 bit windows 2008 Server. Everything works well except one thing: a form to a preview report or output screen, using Run_Report or Run_Report_Object. The two commands start successful reports database engine. The reports database engine also makes a good connection to the Oracle 11.1.0.7 database. The only thing that is not the case, run the report. In the pane, see the journal of the background reports engine, nothing appears, so the engine is not running only one thing.

  Is there someone who has the same problem and found a solution for this?

  I searched the forum and found a few link below:

  http://66.163.168.225/BabelFish/translate_url_content?.Intl=us & LP = es_en & trurl=http%3A%2F%2felfeme.googlepages.com%2fnn60.zip

  and

  http://66.163.168.225/BabelFish/translate_url_content?.Intl=us & LP = es_en & trurl=http%3A%2F%2felfeme.googlepages.com%2fnnb60.zip

  but I'm not able to download nn60.dll and nnb60.dll.

  Please help me find the nn60.dll and nnb60.dll patch oracle 6i number 3 or before version.

  Thanks in advance.

  Rakesh

  Here:

  DLL - download - 4shared

  Concerning

• How to set auditor report run Signon Audit forms

  Hello
  
  I'm on 12.1.1. I'm sysadmin and you want to activate the listener internal run/view the report forms of verification of access code , without giving them the responsibility of the system administrator.
  
  How can I go about it?
  
  
  concerning
  Dula

  Salvation;

  I think that, Yes, it could be the solution to your problem

  Respect of
  HELIOS

• cannot run reports in the menu forms

  A few hours I was able to run reports... in the menu forms but now when I try again, I get this message... its happens with all reports... all reports are working well in the generator
  
  
  REP-110: cannot open the file 'JOTYPE.rdf '.
  REP-1070: error when opening or saving a document.
  REP-0110: cannot open the file 'JOTYPE.rdf '.

  It seems that you have changed your configuration file and now you are off course.

  Check it ' \orahome\reports\server\conf

  Open the file with the name of the report server and find

  Save and exit

  Restart your application server.

  If the paths are Okey, then make sure that this file exists in defind the path.

  Published by: user5826950 on June 14, 2010 01:07

• How to create the report in the following form?

  Hi all
  
  How I use studio EN to create reports.
  I want to create a report that will show me accounts and accounts of each entity, which means I want to keep the entity in the size of the page in the dimension of the line. The report should be done in such a way that if I take an entity in the dimension of the page then it will show a few accounts in the dimension line that
  are specific for this entity and in the same way, if I take another entity in the dimension of the page then it should show me another different set of accounts in
  the dimension of the row corresponding to this specific entity.
  How can I do this in my report?
  
  
  Thank you

  There are two ways that you can achieve this goal.

  You have never given in combinations of entity/account disabled? If this isn't the case, I would like to delete missing lines.

  Is there the potential for existing data in invalid combinations of entity/account, then I would create a specific account that defines the valid combinations. Think of it as a Boolean, a value of 1 for the valid combinations or 0 for invalid combinations. I would then use the 'Advanced Options' en to delete values based on this account.

  Hope this helps,
  -Jake

• call report form 12 c 12

  call report 12 c of form 12 c by RUN_REPORT_OBJECT (the output format is pdf), but get error REP-56133 - an attempt to write to the folder failed due to a lack of permissions , can someone give me some advice. Thank you!

  the solution is:

  1. add more to rwserver.conf

  c:\Temp

  2 mkdir c:\temp in the report server

  3 change the ownership of the object of the report form with the name of Destination report to c:\temp\xxx.pdf

• Form of questions 12 c, run the report, how to set up uifont.ali 12 c reports?

  I have installed Oracle Forms 12 c:

  There are a few questions (problems) in the configuration after the installation:

  1. I need NLS_LANG value CROATIAN_CROATIA. EE8MSWIN1250. Text and the fields displayed are displayed correctly (all that is displayed from database), but their guests and the menu is displayed incorrectly (wrong characterset).

  2. when the report is started from form, instead of run from port 9002 (report server), it runs from port 9001, so I need to manually change the url to view the report.

  3. I don't know how to define a subset of PDF (in the previous version, just edit uifont.ali and put the subset inside).

  4. how to start Report Builder?

  For me, after you apply this hotfix, pdf subsetting works very well. (Linux x 64 environment).

  Concerning

• Report Oracle Forms. Browser does not report.

  It's in my trigger button

  

  

  It seems that you have wrong url to display reports. Remove the forms of report URL: http://ejmtv-virtual-pc:8889 / reports/rwsevlet/getjobid = 8? server = ejmtv.

  Concerning

• How can I report on shipments of landing page form?

  I have the same shape on 5 landing pages, is there a way to run a report on all applications to date and include "landing page" as an attribute?

  I found a solution for moving forward-(1) I created a hidden field on the form and baptized "Landing Page", (2) the 'Population form cloud App' added to each destination page and (3) the cloud application configuration, I put the 'Landing Page' field as a static value, the name for this specific landing page.

  Now I can just click 'view presentation given' form, or run a report for submission of form in insight to filter by date of submission.

• How to remove the internal contacts of Web site reports and remittances form?

  Hello

  There used to be an article about it previously under the support of old, but I can't find them more

  I would therefore delete the activities of people internally at my company of all Web site traffic reports and also to form presentations as it makes it difficult to work on the actual performance.

  For the test, we can use our gmail accounts personal, which will further enhance the figuration, but should be much less that is currently happening.

  Has anyone done this before?

  Thank you

  Richard

  Actually found something I could test for web traffic...

  Eloqua 9 is in the 'Setup' > 'Management' > then under the "System Management" tab > in the left menu, expand "IP filters" and select "visitors to be filtered from analytical."

• How to do a partial update of a form and a report on the same page?

  Hi all

  Im trying to make a page where you have a report on the top, and when you click on the link instead go to the form page, the form on the page is on the bottom of the report. Let's say that im trying to send an id from the report to the item below so that I could go get the rest of the element. However when I pass, other elements would still refer to it as null.

  If I am not wrong it could be done with the quote, but I want it to be partial refresh...

  I tried the steps detailed here, but it didn't work when the lower part is an also a report:

  https://forums.Oracle.com/thread/2345863

  I also tried, but this actually submits a page...

  Base Oracle: Tutorial Apex - form & amp; Report shares the same page

  would it not possible to get a form and a report in a partial refresh page?

  Post edited by: T101_cyberdyne

  Hello

  Do you mean something like this:

  http://Apex.Oracle.com/pls/Apex/f?p=vincentdeelen:26:26

  If so, you must create a dynamic action with a javascript action to set the id of the report line in the form of code field and further action from pl/sql to retrieve the record based on the identification number. You can use this record to set the shape of other items in the field.

  For the example in the link above, the code is as follows.

  action of javascript:

  var empno = $(this.triggeringElement).find('td[headers="EMPNO"]').text)

  $s ('P26_EMPNO', empno)

  action of PL/SQL:

  declare

  cursor c_emp is

  Select * from EMP

  where empno =: p26_EMPNO;

  BEGIN

  for r_emp looping c_emp

  APEX_UTIL. SET_SESSION_STATE ('P26_ENAME', r_emp.ename);

  APEX_UTIL. SET_SESSION_STATE ('P26_JOB', r_emp.job);

  APEX_UTIL. SET_SESSION_STATE ('P26_MGR', r_emp.mgr);

  APEX_UTIL. SET_SESSION_STATE ('P26_HIREDATE', to_char (r_emp. HireDate, 'dd-mon-yyyy'));

  APEX_UTIL. SET_SESSION_STATE ('P26_SAL', r_emp. SAL);

  APEX_UTIL. SET_SESSION_STATE ('P26_COMM', r_emp.comm);

  APEX_UTIL. SET_SESSION_STATE ('P26_DEPTNO', r_emp. DEPTNO);

  APEX_UTIL. SET_SESSION_STATE ('P26_ORDNO', r_emp.ordno);

  end loop;

  END;

  Make sure you list the item id in the field "Page of Items to submit" and ALL your form elements in the field "Page of Items of return" as follows:

  http://www.vincentdeelen.com/images/OTN/plsql_action.PNG

  A screenshot of the configuration of dynamic action:

  http://www.vincentdeelen.com/images/OTN/dynamic_action.PNG

  Kind regards

  Vincent

• Forms and reports Oracle apex Oracle10g migration

  Hello

  We are a small shop and have invested heavily in the pl/sql code to generate various reports and graphs using forms and reports10g, and it has been very stable. Forms and Reports11g oracle is different from 10g because it uses middleware and architecture is very different. and it might be overkill for what we need. Can someone point me in the right direction regarding documents, books and videos? for the migration to the APEX? I am new to Apex and will look at the documents available and wanted everything but just some advice from the user.

  Thank you

  Austin

  You really don't have to MIGRATE to the APEX, it is more than a process of re-development... Your existing PL/SQL code can be re-used when viable, but in the forms & reports you have an environment of a free State with APEX environment State...

  APEX also has this similar middleware (APEX listener with WebLogic or Glassfish)... We must therefore understand that you will need to think about what you REALLY want a gesture APEX...

  Forms & reports still work for you, then you MIGHT want to stay there with them... Otherwise, move to the APEX would be a long term choice...  Given that the future of forms & reports is not too clear...

  Thank you

  Tony Miller

  Software LuvMuffin