Reports of the rule properties

Similar Questions

• OMBPlus report definition syntax "rule action" on a data_rule in a map

  Hello

  I'm trying to make sure that all the rules given in the tables of my maps are set to 'REPORT' and want to use OMBPlus for this but I can't find the proper syntax to do this. This is what seems logical to me at this time to retrieve the current value:

  OMBRETRIEVE MAPPING '$mapName' DATA_RULE '$ruleName' OPERATOR '$tbl' GET PROPERTIES (RULE_ACTION)

  It makes me:

  OMB02933: Error getting child object of the type DATA_RULE with 1855 name: MMM1034: DATA_RULE property does not exist.

  I also tried the reverse:

  OMBRETRIEVE MAPPING '$mapName' OPERATOR '$tbl' DATA_RULE '$ruleName' GET PROPERTIES (RULE_ACTION)

  
  

  also gives an error.

  
  

  Does anyone know the correct syntax?

  
  

  Thank you

  Eric.
  

  To answer my own question and anyone else looking for the correct syntax, this is what I came with:

  # some variables for name mapping ($mapName) settings and scoreboard operator target ($tgttbl) in the mapping took place before these lines

  define the rules [OMBRETRIEVE '$mapName' OPERATOR '$tgttbl' DATA_RULES GET from MAPPING]

  foreach rule $rules {}

  OMBRETRIEVE MAPPING '$mapName' OPERATOR '$tgttbl' DATA_RULES '$rule' GET PROPERTIES (RULE_ACTION)

  MAPPING of the OMBALTER '$mapName' CHANGE the VALUES of PROPERTIES (RULE_ACTION) DATA_RULES '$rule' OPERATOR '$tgttbl"("REPORT")

  }

  REPORT can be replaced by IGNORE or BR_MOVE_TO_ERROR, according to the necessary RULE_ACTION.

• error reported from the transport layer and the error description was impossible to extract

  Hi, can someone please explain how to get rid of the pop-up message when the computer starts up:
  error reported from the transport layer and the error description could not be found! the message has been lost
  Windows XP Virgin internet net gear wireless. I searched on the internet - nothing except suggestions, this is the internet
  connections but is not working okay I tried microsoft fix
  Thank you john

  Hi, I just started to use the hard drive that had the problem, it's still there. The problem is with the raid card. (no problem on other drives) In system config, starting there are two enteries: SATARAIDS and silcfg. I checked the SATARAIDS, rebooted

  missing message. I deleted all the files SATARAIDS and silcfg. my computer, properties, hardware - deleted. deleted the folder in program files. did a scan to remove any files or file fragments on the raid drivers. I did not know I had lefe the cd in the drive for the raid drivers I have in yesterday. I rebooted.
  after reboot, there not says found new hardware "raid card" perhaps because the disc was in the drive and it automatticly installed drivers. FIXED
  NO MORE ANNOYING MESSAGE

• Microsoft Paint - how to change the rule in inches and centimeters

  How to change the rule in inches, centimeters, etc.. ?

  While in the paint, select the arrow down in the blue box in the upper left of the window.

  Select Properties

  Set the unit of inches, etc.

• Windows Explorer crashes or resets whenever open the system properties, among other things

  So, recently, I had one set of questions arise in windows seven, apparently at random. It started to happen when I disabled it Internet Explorer (which I had reactivated it after that I saw coming problems) and uninstall my old antivirus (AVG Free). I also installed Windows updates not too long ago (after a long period of leave it turned off). I think it was about a week and a half ago or not.

  First of all, I noticed that the Windows Photo Viewer launches (even with the live Gallery, have not really tried the other windows live applications). After an investigation, I noticed that the dllhost.exe process would start up when I would try to launch the photo viewer, but would end not too long after. Apparently, I Live Gallery to run at startup (with anything other than HP related; it is as well as the laptop I use), but it doesn't seem to work in this case.
  Second, most of my programs installed (Mumble, the pitcher in the League of legends, steam, Skype, among other things) suddenly had to be run in compatibility mode for Windows 7... in Windows 7. Otherwise they don't start/stop working and other. Obviously, this is not good. I have not explored the question too, it's all I have on it.
  Third, whenever I open the System Properties Windows, either through my computer > properties or control panel, windows Explorer stops and restarts. Only this single window.
  I tried running sfc, who gave no results after a reboot (without reset my start ORB custom). A second performance immediately after the said nothing was wrong. I ran windows in safe mode, which seemed to have solved the issue of windows Explorer (not too sure Photo Gallery, because it cannot be run in safe mode). Since nothing seemed wrong then, I tried to run in clean boot mode, brings the issue of Explorer back, but solved the problem of Windors and Live Gallery Photo Viewer. I tried many restored system (a restore before windows update has solved my problem of Photo Viewer, but this restore point has long been lost at the time where this all started to happen all together). On a side note, I got a voip program, Mumble, to run correctly after all this happens, if I reinstall, repair or run the program in compatibility mode again.
  I spent my time recently trying to understand the issue of windows Explorer, and everything that I had going on right now is that it might have something to do with ntdll.dll
  . Here is the report of the accident event viewer and reboot:
  Log name: Application

  Source: Application error

  Date: 13/01/2014 02:50:41

  Event ID: 1000

  Task category: (100)

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Fiora-chan

  Description:

  The failing application name: explorer.exe, version: 6.1.7601.17567, time stamp: 0x4d672ee4

  The failed module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24

  Exception code: 0xc0000374

  Offset: 0x00000000000c4102

  ID of the process failed: 0 x 3498

  Start time of application vulnerabilities: 0x01cf105d4a9207a3

  The failing application path: C:\Windows\system32\explorer.exe

  The failed module path: C:\Windows\SYSTEM32\ntdll.dll

  Report ID: 4e94424f-7c51-11e3-a854-28924a18ac7a

  The event XML:

   

     

      1000

      2

      100

      0 x 80000000000000

     

      55233

      Application

      Fiora-chan

     

   

   

      Explorer.exe

      6.1.7601.17567

      4d672ee4

      ntdll.dll

      6.1.7601.18247

      521eaf24

      C0000374

      00000000000c 4102

      3498

      01cf105d4a9207a3

      C:\Windows\system32\explorer.exe

      C:\Windows\SYSTEM32\ntdll.dll

      4e94424f-7c51-11E3-A854-28924a18ac7a

   
  I also have a crashdump also, which I have no idea how read for the life of me. I don't know if this download will work or not, but whatever.
  https://www.mediafire.com/?d5aidn8qe47id03
  I'm at a loss right now on how to solve this problem. I was planning to do a reinstall in place, but I don't have a copy of the Windows 7 disc, nor have I any DVD big enough to spare a. I have to take this laptop for repairs of the hinge, and I don't want this issue ballooning the cost of the repairs on my laptop should I take on someone to fix for me.
  I ran my new (MSE) antivirus and MalwareBytes to check for problems, and they found some (if I remember correctly, it was potential threats in internet explorer, which I use never, incidentally). After the removal of these questions, everything seems to stay the same.
  A quick response would be greatly appreciated.
  Trying not to lose sleep trying to solve this problem.
  JVenus

  Looking at the dump with WinDbg (Windows Debugger) file the module that seems to be the cause of the accident is the atiumd64.dll which is a component of the AMD graphics driver:

  WARNING: Unable to verify timestamp for atiumd64.dll
  ERROR: Module load completed but symbols can be loaded for atiumd64.dll
  Cannot load the image C:\Windows\assembly\NativeImages_v2.0.50727_64\mscorlib\88744044294787b99dd4a8704ab75a79\mscorlib.ni.dll, 0n2 error Win32
  WARNING: Unable to verify checksum for mscorlib.ni.dll
  WARNING: Unable to verify timestamp for explorer.exe
  Probably caused by: verifier.dll (auditor! VerifierStopMessage + 1f0)

  Try to uninstall then reinstall the AMD graphics driver using the latest version available.

  Try HP for the latest driver for AMD graphics for the laptop, or you can try this link AMD:

  http://support.AMD.com/en-us/download/mobile?OS=Windows

• The rule of naming feature can be overridden in some cases?

  As a Unique constraint , I have created includes 4 columns, enforcement of rules for naming in the table properties - even with the abbreviations for all tables and columns configured, it produces a constraint name that is 52 characters long (as shown in the picture at the bottom.)

  Is there a way of or change how the 'models of naming rules' are used in this way (on duress with several columns or can maker data provide a way to allow the end user to create a specific name for a constraint like this, but does not allow the "naming rules" substitute for subsequent executions (IE. ' ")  Thanks to a checkbox "Override")?

  

  

  Yes, you can use ' tools > Administration object name ' to lock names and they cannot be changed

  Philippe

• How affect Dtx200 never participate in the rule of the load instead of doing in the sketch?

  I only know how to right click the Member that I wanted and click on modify member properties, then never changing the storage of data to share. But how to do it within the rules of charge? I also use essbase ASO.
  

  
  

  What I have in my .txt file. that is open in the loading rules that have columns.

  Member1

  Member2

  Member3

  What I did after having built the loading rules in the cube.

  Stored DataStorageTest # Default # (3)

  Member1 (+)

  Member2 (+)

  Member3 (+)

  What I want to achieve by using loading rules and not to do in the sketch

  Stored DataStorageTest # Default # (3)

  Member1 (+) (never share)

  Member2 (+) (never share)

  Member3 (+) (never share)

  Hello

  That's what I want to say my dear... The query answered in the mentioned thread. However, there are some codes that are used to set the properties in the rules of the load. The value of a column the file generation of dimension with the code that you want to use and tag the column as a property in the State of charge.

  For example, use N never share.

  Code	Description
  %	Expressed as a percentage of the total current in consolidation
  *	Multiply by the total current in consolidation
  +	Add the total current in consolidation
  -	Deducted from the current sum in consolidation
  /	Divide by the total current in consolidation
  ~	Exclude the consolidation
  ^	Exclude all Essbase - Consolidations / aggregations in all dimensions
  A	Treat it as an element of balance of medium time (applies to dimensions only accounts)
  B	Exclude data values of zero or #MISSING in the rest of the time (applies to size accounts only)
  E	Treat it as an element of expenditure (applies to dimensions only accounts)
  F	Treat as a first element of balance time (applies to dimensions only accounts)
  L	Treat as a last element of balance time (applies to dimensions only accounts)
  M	Exclude the data values of #MI or #MISSING of the balance of time (applies to dimensions only accounts)
  N	Never allow the sharing of data
  O	Tag as Essbase - Label only (store no data)
  S	Member of the stored membership (non - dynamic Calc and not the label only)
  T	Require an Essbase - calculations of re-encoding (applies to dimensions only accounts)
  V	Create like Essbase - dynamics and store calculations
  X	Create like Essbase - dynamic calculations
  Z	Exclude given values of zero on the balance of time (applies to dimensions only accounts)

  Hope this helps,

  Kind regards

  Amit Khanna

• PowerCli script to generate the report for the VM and ESXi model

  Hello

  I'm trying to generate a report for the virtual machines to a domain controller that includes the operating system, Cluster and host of brand and model of ESXi, but for some reason any the ESXi info does not come through. Any help is greatly appreciated.

  Get-data center 'TEST ' |

  Get - vm |

  WHERE-object {$_.} PowerState - eq "Receptor"} |

  Select Name, @{N = "OS"; e = {$_.}} Extensiondata.Guest.GuestFullName}},

  @{N = "Cluster"; E={$_. VMHost.Parent}},

  @{N = 'Esxi model'; E = {Get-VMHost - VM $_.} VM | {{Select model}}

  The virtual machine has the properties of the host.  For your information "Model ESXi" use $_. VMhost.Model, $_ is the current information for pipeline for the virtual machine.  You did for the section "cluster".

• How to make consolidation operator (~) instead of (+) by placing it in the rules of the load.

  Because by default it will make my child (+) values after build in the cube. I don't want one by one change the operator of consolidation in the values of the child to (~) in the outline. It must therefore be made in the rules of the load. For your information, for my build parameter dimension, I have defined this reference generation and in the dimension of the generation properties, I put as a generation like the field and field number 2. I can't find the setting to make all my child operator of consolidation so that it takes (~) in the rules of the load. Thank you

  What I have in my .txt file. that is open in the loading rules that have columns.

  Value1

  Value2

  Value3

  What I did after having built the loading rules in the cube.

  Stored MyDimensionName # Default # (3)

  Value1 (+)

  Value2 (+)

  Value3 (+)

  What I want to achieve.

  Stored MyDimensionName # Default # (3)

  Value1 (~)

  Value2 (~)

  Value3 (~)

  Hello, I did it before I saw your reply. I add a first column to help to create a field using text, and I type in ~. So total I now have two columns

  Field1 Field2

  Value1 ~.

  Value2 ~.

  Value3 ~.

  After that, for my dimension build setting, I put it as a reference of generation. In the generation of dimension properties, I put it Field1 as generation for the field and field2 as a property for the field. I have set as number2 Field1 and field2 as number2. I need to change my stored MyDimensionName # Default # (3) stored MyDimensionName # Default # (3) (Label only) If no, it will not work. That's how I did it. Haven yet tried your method. That means that u create using a field using text that is gen1 for column1, and ~ to Column3? In total it is therefore 3 columns?

• Process Scheduler running SQR report gets the Client HTTP response Code 401 Unauthorized error

  People,

  Hello. I'm under PeopleTools 8,53 Oracle Linux 5 with Oracle 11 g 1 material database.

  Process scheduler run reports SQR and get the error message as below:

  Error of the client Http Response Code: 401 - non authorized. Transfer HTTP error.

  My report node information is below:

  URLID: http://ip_address:port/p/psreports/ch

  Home directory: /psreports

  Resource URI: SchedulerTransfer/ch

  Login ID: PS

  Password: mypass

  PeopleTools > IntegrationBroker > Configuration of integration > nodes: authentication option is selected password.

  The 2 roles, ReportDistAdmin and ProcessSchedulerAdmin are granted to the user PS

  Someone tell the error above due to incorrect or misspelled path for report repository in the configuration.properties file.

  I see no error in my configuration.

  My question is:

  Can any help folk to solve 'Error Http 401 - transfer HTTP error response Code' unauthorized customer?

  Thanks in advance.

  I think there might help:

  E-RD: transfer report error: Client Error Code: 401 - Unauthorized (63.59) (Doc ID 623250.1)

  E-RD: what are the steps to configure basic authentication for the repository of reports on PT 8,4 x using Weblogic? (Doc ID 970572.1)

  Also if you use this with test the load on load balancer balancer.

  Kind regards

  RAM

• Report of the VM guest

  Hello

  I want to create a daily report that lists the virtual machines that were created and a few details about them.  Specifically: date of creation, memory and cpu allocated, tools and HW versions, home hardware (CD-ROM, etc.).  Before putting my skills limited to scripts for the test lol, I thought I'd run it by the community to see if something like this already exists, there is a better way to do it, or if anyone has any other suggestions.   I'm trying to make sure the construction team is actually the spec construction.   Environment: ESXi 5.1, 5.1, vRealize not vCenter.

  Thanks in advance!

  Bob

  You can analyze the events of new virtual machines the created or deployed.

  See  3. Re: report from the list of the VM created last year.   for an example.

  You can set the time interval as you wish with the Start parameter.

  Once you have the new virtual machine, it comes to a Get - VM and collecting the properties that you need

• Convert the output of a report at the entrance to another report

  I am looking for a number of past events related to the creation of virtual machines.  After obtaining all the data I can on those virtual machines from objects event, I try to channel the output in another section of the report that vCenter queries for each virtual computer and gets class size information from the results of get - vm.

  Get-VIEvent - maxsamples ([int]: MaxValue)-start (Get-Date). AddDays(-8)-done (Get-Date).adddays(-4) |

  where {"VmCreatedEvent", "VmClonedEvent", "VmDeployedEvent" - contains $_.} GetType(). Name} |

  Select Createduserid, userName,@{N="vmname"; E={$_. UM Name}},@{N="ESXiHost"; E={$_. $host.name}} |

  % {get-vm-name $_.vmname} | Select name, numcpu, memoryGB, provisionedSpaceGB, UsedSpaceGB, Createduserid, username, ESXiHost | Export-csv-path 'c:\test.txt '.

  I need to change the part in orange to make it operational - so that I can take the properties that I created in the first part of the report, make it available in the second part of the report so that I add the new properties.  How can I get all of these combined in my output file properties?

  Thanks for the help!

  Hello, TheVMinator-

  You should be able to get the info with a little tweaking, as:

  Get-VIEvent -MaxSamples ([int]::MaxValue) -Start (Get-Date).AddDays(-8) -Finish (Get-Date).AddDays(-4) |Where-Object {"VmCreatedEvent","VmClonedEvent","VmDeployedEvent" -contains $_.Gettype().Name} | %{    $evtThisNewVMEvent = $_    Get-VM -Id $_.Vm.VM | Select Name, NumCPU, MemoryGB, ProvisionedSpaceGB, UsedSpaceGB, VMHost,        @{n="CreatedTime"; e={$evtThisNewVMEvent.createdTime}},        @{n="CreatedBy"; e={$evtThisNewVMEvent.UserName}},        @{n="OrigVMHost"; e={$_.VMHost.Name}}} ## end foreach-object
  

  It combines the select statements into one and with the use of an additional variable, allows for the creation of VM _and_ event info.  I also added the 'in progress' and differentiated VMHost VMHost to the event is the "OrigVMHost", just for fun.  How does do for you?

• Speed real keyframes and the influence of the spatial properties

  I am writing a script that exports of layer properties based on their keyframes to animate on html.

  There are 3 different groups of properties and each takes a different calculation.

  
  

  PropertyValueType.COLOR, ThreeD, TwoD, OneD

  It is the easiest. For each dimension, I get the averageSpeed. And then I calculated the checkpoints of the ease curve.

  averageSpeed [index] = (endKey.value [index] - [index] initKey.value) /duration;

  bezierIn.x [index] = 1 - item.influence / 100;

  bezierOut.x [index] = initKey.easeOut [index] .influence / 100;

  bezierIn.y [index] = 1 - ((item.speed) / averageSpeed [index]) * (item.influence / 100);

  bezierOut.y [index] = ((initKey.easeOut[index].speed)/averageSpeed[index]) * bezierOut.x [index];)

  
  

  PropertyValueType.ThreeD_Spatial, TwoD_Spatial

  For these spatial properties, for average speed, I need to first get the spatial curve distance, and then it's like before.

  
  

  averageSpeed = getCurveLength (initKey.value, endKey.value, initKey.tangentOut, endKey.tangentIn) /duration;

  bezierIn.x = 1 - endKey.easeIn.influence / 100;

  bezierOut.x = initKey.easeOut.influence / 100;

  bezierIn.y = 1 - ((endKey.easeIn.speed) / averageSpeed) * (endKey.easeIn.influence / 100);

  bezierOut.y = ((initKey.easeOut.speed) / averageSpeed) * bezierOut.x;

  
  

  PropertyValueType.SHAPE

  The shape is the same as the previous one, only this average speed is always 1.

  
  

  They are all very well in common cases work. But for the spatial properties, After Effects reports incorrect influence in some cases.

  It seems that the influence is deliberately limited so that the speed will not get negative values on the way.

  I don't understand exactly how the influence is limited but the keyInTemporalEase property´s and keyOutTemporalEase indicates always the value defined by the user and not the limited value.

  I need to get the real value, so I can reproduce the animation correctly when I export it.

  
  

  Does anyone have an idea how to get the real value of the property of influence? I understand what is happening properly?

  Here´s a chart showing the curve when the influence is limited.

  
  

  After a bit of trying, I got what seems to exactly reproduce the movement in all situations:

  // e1, e2 : KeyframeEase associated to the first and second key:
  var e1 = myProp.keyOutTemporalEase(1)[0];
  var e2 = myProp.keyOutTemporalEase(2)[0];
  
  var DT = myProp.keyTime(2)-myProp.keyTime(1);
  var segLength = getCurveLength(bezier segment);     // use your getCurveLength method
  
  // restricted influences (restrictions are so that the arclengths is a non decreasing function of the time):
  var inf1 = Math.min(100*segLength/(e1.speed*DT), e1.influence);
  var inf2 = Math.min(100*segLength/(e2.speed*DT), e2.influence);
  
  // now use inf1 and inf2 instead of e1.influence and e2.influence;
  

  Xavier.

• standardize the rules of paragraph

  I inherited a large number of documents that use many styles that I'm trying to standardize. One thing that is obvious, for example, is that many use different weights of paragraph rules in their style. Is it possible for me to open a document and quickly define all the rules of paragraphs (when used) of a particular weight?

  I use CC 2014

  You can also set several properties on one line paragraph, then:

  Tell application "Adobe InDesign CC 2014"

  set the properties of each paragraph of each story in the active document to {rule above right indent: 0.1, rule above offset: 0.25, rule above left indent: 0.25, rule above line weight: 0.9, rule above tint: 50.0}

  tell the end

• Guides do not deleted when brought back to the rule

  Hi, a bit of a bug here.

  When I drag a guide towards the sovereign, out of sight, with the intention of getting rid of them, he's always there, to a right of action under the rule. So when I pan / zoom my scene, I can still see. However, I can not catch more, and when I save, close and reopen the file, the guide is a good start, finally.

  I work with Animate 20141 on a Mac with Yosemite.

  Hi Peter

  The bug is fixed and will be available as part of the next update.

  Thanks for reporting the same.

  Concerning

  Avinash