Repository of R3

Similar Questions

• Thunderbird is not updated in the ubuntu repository

  Hello

  Thunderbird 38 is not yet in the repository Ubuntu 15.04?

  Thank you

  Canonical decides when the Ubuntu of Thunderbird 38 version will be available, not Mozilla. You can request a forum of Ubuntu.

• HPDM: HPDM replace self signed SSL certificates for server HDPM and master repository

  I am trying to replace the automatically generated self-signed certificates (issued to DM) issued by DM server HDPM and master repository.  I'm NOT arbitration FTPS, HTTPS embedded HPDM or CERT Thin Client Agent server.

  I already have CERT for the installation of our own internal domain CA for FTPS in IIS and the built-in Apache HTTPS server.  These work properly and pass tests of repository for both protocols.  I also have questions for Thin Clients of our internal CA very well.

  I am interested in the HPDM real server cert and cert master repository. These are generated automatically when the two services start.  They use a very weak MD5 hash and key RSA 1024.  I can't find any documentation around that, with the exception of troubleshooting, in which you can remove these certificates restart services and they will be regenerated.

  Here are the paths certs\key
  HPDM % install Path%\MasterRepositoryController\Controller.crt (Cert repository)

  HPDM % install Path%\MasterRepositoryController\Controller.key (repository key)

  HPDM % install Path%\MasterRepositoryController\Client.crt (HPDM Server Cert)

  HPDM % install Path%\Server\Bin\hpdmskey.keystore (Both HPDM server and repository Certs and keys) (not sure what format it is in.  It is not PEM and P12 ok I can say)

  There are also some HPDM % install Path%\Server\bin\hpdmcert.key.  Don't know what it is.  It's the key to the server HPDM but deleting it does nothing and it is never re auto generated in one of my tests.

  I am able to replace the Controller.crt and keys with my own files CA internal those emitted very well.  The service started and no errors occur.  However if I replace the Client.cert (HPDM Server Cert) with my own service will start but there are Socket SSL errors in repository logs and the HPDM server could not connect to the master repository. I have no idea where the key file is supposed to be for HPDM Server Cert.

  Can anyone help with this?  I can't find the configuration files for the service to generate their own certificates.  If I did I would try at least to change the config to do not use MD5.

  Hello

  These certiricates between HPDM server and MRC are not designed for customizable. Please submite one scenario if you have concerns of security on it.

  Just for info:

  hpdmcert. Key is for communication between the server HPDM and gateway HPDM

  hpdmskey.keystore is for communication between the server HPDM and MRC

  server_keystore is for the commhucation between HPDM server and the Console HPDM

• DEB Skype in a repository (deb)-?

  Hello world

  I would like to see the DEB of the new skypeforlinux in a repository (deb)-. If I can add this repository in my package manager and my Skype is always up to date

  Best regards

  Andreas

  Answer to myself: I just noticed that the DEB package has already created a corresponding entry in /etc/apt/sources.list.d/

  A small request: do a dependency to the package 'apt-transport-https"it is necessary for the correct updates.

• Master repository HPDM4.6 SP3 - problem

  Hello

  I have a problem with the implementation of master repository in HPDM 4.6 SP3 on Windows Server R2 2012.
  First I put basic information in the management of repository and I did a test that completed successfully (attachment #1).

  After awhile, I got an error of fixing #2.

  Then, I tried to view the contents of the master repository and I had a #3 fixing error.

  I tried to send two tasks to the test device - both failed ultimately (attachments #4 and #5).

  I think I checked everything starting from the turn of the firewall, open all ports, resettlement HPDM and install it on another machine.

  Any ideas how can I do Master repository works properly?

  Yes, as my co-woker mentioned above, your FTP repository has not been defined according to the configuration of your RCM.

  You must set the repository FTP at ftp: / / < IP > / HPDM based on the configuration of your RCM.

  Note: The 'Test' button will only check if the IP and port is available, which can mislead you when given the 'success '. We are looking to improve it in the next version.

• Repository of child synchronization...

  Hello!

  I have a 4.6 SP4 HPDM

  My master repository works fine, I can capture images from customers and push them back.

  When I create a new repository of the child in the same subnet as the server I have problems.

  Setup is checked and tested, everything looks good.

  But when I sync it will stop synchronization.

  If I look at the new kid and the newspaper of master FTP (FileZilla), nothing happens at all.

  I found an error in MasterRepositoryController.log

  < / content >
  repositories <>
  < repository ID = "1" Name = "Server DT020864-Alingsås" address = "10.226.40.88" >
  < name of the Protocol = "FTP" Port = "21" Path ="". "" Username = "HPDM" Password = "kwZ3k3wLJXX5P8HsgcQv5A is" / >
  < protocol name = "SMB" Port = "0" path = "HPDM" username = "DT020864\csgadm #" Password = "IbFzHUFpSOiQo6oG9veW5w is" / >
  < / repository >
  < / repositories >
  < / operation >
  < / query
  2015-03-26 11:24:13 ERROR CreateTasks failed, bad XML:< application ID = "7" Priority = "Low" Version = "1" >
  < operation Type = 'Sync' >
  < content >
  < path = name "/ repository/Agents ' >
  < / path >
  < path = name "/ repository/gateways" >
  < / path >
  < path = name "/ repository/tools/image" >
  < / path >
  < path = name "/ repository/tools/PXEImagingTool" >
  < / path >
  < path = name "/ repository/HP_EasyTools/Config" >
  < / path >
  < path = name "/ repository/HP_EasyTools/Settings ' >
  < / path >
  < path = name "/ Repository/Files/captured" >
  < / path >
  < path = name "/ Repository/Files/ToDeploy" >
  < / path >
  < name of the path = "Images/repository /" >
  < / path >
  < / content >
  repositories <>
  < repository ID = "1" Name = "Server DT020864-Alingsås" address = "10.226.40.88" >
  < name of the Protocol = "FTP" Port = "21" Path ="". "" Username = "HPDM" Password = "kwZ3k3wLJXX5P8HsgcQv5A is" / >
  < protocol name = "SMB" Port = "0" path = "HPDM" username = "DT020864\csgadm #" Password = "IbFzHUFpSOiQo6oG9veW5w is" / >
  < / repository >
  < / repositories >
  < / operation >

  Problem solved

  Don't USE space AAO and maby (empty) in the name

  DT020864-Alingsas server

• FTPS (ftp over ssl) to the master repository connection. HPDM

  Hello

  I'm trying to configure the MR for FTPS (ftp with ssl). When I test the connection in the repository editor he fails to connect with the current FTP connection. The shared connection is successful.

  I can successfully connect with the Filezilla client for the FTP site.

  The Filezilla give a warning of a certificate not signed, when I click ok it is properly connected.

  Configuration information:

  Site - FTP is hosted on hpdm (2012 R2 server) with IIS server.

  -certificate of self-signed

  -port 21

  Can someone tell me how to configure the repository Editor to connect to the ftp site?

  Kind regards

  Van Beek

  Never mind.

  I found a white paper of the connection to configure FTPS

  HPDM wants you to use port 990 for ftps and not 21.

  FTP://FTP.HP.com/pub/hpdm/documentation/whitepapers/4.6/WP_HPDM4.6_FTP_Configuration.PDF

• What opkg repository to use?

  Have been seaching the forums and the Internet.

  Direct reference me if there are or please redirect to the appropriate forum.

  What is the best opkg repository to point my cRIO-9068 to?  Specifically I'm wanting to install Python on the cRIO but will want to examine the other core and additional packages and available offenders.

  The default repositories in /etc/opkg/*.conf point to a repository angstrom returning 404 not found with a wget by: opkg update (see below).

  Note: site of deposit in the configuration file is to pings so network connectivity is confirmed.  However does not meet the 80 website telnet port on which means maybe down?

  Any suggestions or pointers to reference appreciated.

  Thank you

  opkg Config files:

  Angstrom-base - feed.conf -.

  SRC/gz-angstrom-base http://feeds.angstrom-distribution.org/feeds/next/ipk/eglib

  Angstrom-python - feed.conf -.

  # python-angstrom-src/gz http://feeds.angstrom-distribution.org/feeds/next/ipk/eg

  Results of an opkg update:

  Admin@NI-cRIO-9068-01a6fb7b: / etc/opkg # opkg update

  Download http://feeds.angstrom-distribution.org/feeds/next/ipk/eglibc/armv7a/base/Packages.gz.
  wget: server returned the error: HTTP/1.1 404 Not Found
  Collected mistakes:
  * opkg_download: could not download wget http://feeds.angstrom-distribution.org/feeds/next/ipk/eglibc/armv7a/base/Packages.gz, returned 1.
  Admin@NI-cRIO-9068-01a6fb7b: / etc/opkg #.

  Thank you

  Thanks Aaron,

  I can't find this forum in question (still looking).  Somehow you can point me to even and I'll repost there.

  Thank you

• Optimize store them in the repository GOOP

  Hello

  I am writing an application that reads a RS232 device that sends data with a fewquency of 33 Hz. I'm querying data RS232 with a while loop that runs with a fewquency of 66Hz. In this while loop, I placed the attached .vi. My problem is that if my applications do a lot of other things at the same time the laggs asked strongly or crashes after a while (about one minute). However, when I remore the .vi attached the program works perfectly. This brings me to the conclusion that save the tables in a repository GOOP takes a long time (more than 15 ms) when the tables get large. Is there another way more optimized in order to save the data?

  I would appreciate your advice,

  Rui

  Hello!

  Just off the top of my head:

  The channel dividing the part should not be a problem. Table manipulation is the usual suspect, tables that are based permanently on are slow to manage, they must reallocate memory more time to another. Do you know what size your table will ultimately be? Or at least have a maximum table size? In this case, try to initialize the tables (using the 'initialize the array") to this format when you create the object, then that memory space wil be pre-allocated for them. This might speed things up. Can you get an indicator of the size or the probe on the berries for themselves how big they are when things start to go bad? If they are huge, you need another solution.

  Martin

• Loading time of LabVIEW tool to compare files from the repository

  I have the LabVIEW compare the configuration of the tool of the differences for .ctl and .vi files in the source Surround SCM control system.  The source code control system is running on a network server.  My PC is on the same network as the server.

  When the LabVIEW bed comparison tool screws that come from a control repository to differentiate against the files on my computer, it seems to load the files to a temporary folder located in users\username\appdata file.  It takes a lot of time to load the screws that have a lot of subVIs, because as the search tool for each Subvi the tool begins his research in the vi.lib and instr.lib files before finding the Subvi in the temporary folder.  It takes a few seconds and sometimes as much as 10 seconds to load each Subvi.  It takes a lot of time Diff screw with many subVIs.  Is there a way to make the comparison process go faster?  Or is it something that should be fixed in the comparison of LabVIEW tool?

  Thank you

  Gary

  This is the normal behavior of the LVCompare.exe and records who begins looking for subVIs or file (.ctl) control is not editable. The available options that can be configured are:

  Configuration of control of Source code with LVCompare.exe

  http://zone.NI.com/reference/en-XX/help/371361H-01/lvhowto/configlvcomp_thirdparty/

• How to check the size of a folder in a repository (using a URL not a local path)

  Hi, I wrote this function to calculate the size of a local folder, but somehow I can't make it work for a folder in a repository (using a URL).

  Help, please.

  The repository is online. I wanted to be able to get the modified files/folders for one revision to the other, calculate the total size, check if there is enough space on the drive to export. I got this by using TortoiseSVN commands. list of svn - r %s - v %s will give you the size of a file in bytes.

• type of data repository more quick vi

  I inherited a large application LV that, in some cases runs VERY slowly. It is almost exclusively due to the transfer of data between the application and the database or between a few screws to access the data in the repository live. First time data are necessary, it is read from the data base (via ODBC) and stuck in a LV repository with an identification number associated with (i.e., it is a version stripped of a class of porridge). This repository was written to be as simple (and effective?) as possible and is essentially a reentrant vi with a shift uninitialized register which contains an array of clusters. You can create, delete, read and write data in the repository as a Variant. Some of the groups of data are quite large (> 100 controls) and may contain subgroups or tables of channels and telephone numbers (I know, I know...).

  There are about 10 different repositories running. Each folder can contain data for items up to 30. The repositories as a whole are available on 1000 times and the 200 times database for a given operation (which therefore ends up taking about 20 seconds!)

  Because I don't have the luxury of rewriting the entire application from scratch, I need ideas on how to speed things up. So: Is there a quicker way to store/retrieve data as the repository I described? Are the massive parallelism and a 8-core chip my only Savior?

  I am running LV 7.1 on XP. I have attached a JPEG of the repository.

  Thanks for any ideas

  
  

• repository is compatible?

  This is the response I get from the prompt when you run it as administrator and typing in winmgmt / check the repository - seizure and winmgmt /salvagerepository - enter.  What does that mean?

  My computer guard disconnect itself after I turn on Windows Firewall.  Firewall Windows is disabled again when I log in.  This occurs every ten to thirty minutes.  I'm not to my knowledge running a competing firewall or any other firewall accepts a firewall router.

  Hi GiveGaveGiven,

  Please see the following thread similar with a possible fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Security/Windows-Defender-wont-start-WMI-repository-is/e982f4b2-1c21-4263-94a1-d0eff58ae286

  I hope this helps!

• Windows Defender does not start; WMI repository is consistent.

  My Windows Defender on Vista (home) does not start, and I tried several times to troubleshooting it. I ran the winmgmt/verifyrepository and it always comes back with "repository is constant." So what now?

  Hello

  1. what exactly happens when you try to start Windows Defender?
  2. When was this last work fine?
  3. you did it any hardware/software changes to your computer before this problem?

  I suggest you try the procedure below.

  Step 1: Check if windows defender service is running and set to automatic.

  a. click the Start button.
  b. click Run, and then type services.msc.
  c. now, locate the service named Windows Defender.
  d. Double click to display the Properties window.
  e. set the startup type to Automatic
  f. click apply , and then click Start
  g. click OK , then close Services windows.

  Step 2: Check if the problem persists in the clean boot state.
  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Step 3: Run to restore the system to a date and a time when Defender windows worked fine.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Troubleshooting of Windows Defender
  http://support.Microsoft.com/kb/555957

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• What is the repository of Dell for Ubuntu 14.04

  Hello

  Recently, I bought a Dell Inspiron 15 laptop 5555 with pre installed Ubuntu 14.04. However, it came with single partition for home and root that is not a recommended practice. So I reinstalled Ubuntu 14.04. However, I forgot to note the URL of the repository for Dell. Now my problem is like the Dell laptop driver is not installed the 'Fn' key does not work. The downloads on Dell section shows only the Windows Driver. The clientele is pathetic and they me slam just as if I did a sin by buying portable Ubuntu.

  DOE anyone know where can I get Ubuntu drivers for Dell laptop keyboard?

  I hope that you already have an answer, but in any case my 3510 seems to have these repositories of plant /etc/apt/sources.list.d

  faithful - dell.list

  public of loyal Dell dell.archive.canonical.com/updates deb

  deb - src dell.archive.canonical.com/updates public of loyal-dell

  faithful-dell-biz-long live - skl.list

  public of loyal-dell-biz-vivid-skl dell.archive.canonical.com/updates deb

  deb - src dell.archive.canonical.com/updates faithful-dell-biz-vivid-skl public

  faithful - oem.list

  public deb oem.archive.canonical.com/updates faithful-oem

  deb - src oem.archive.canonical.com/updates public of loyal-oem

  faithful-oem - sp1.list

  public of loyal-oem-sp1 oem.archive.canonical.com/updates deb

  deb - src oem.archive.canonical.com/updates faithful-oem-sp1 public

• Supported Oracle as repository NMS?

  I wonder if, at some point in the future, RDBMS Oracle would be supported as NMS, instead of SQL Server repository.

  Hi Bernie,

  This isn't currently on the roadmap.

  Thank you