Restart the question Module?

Similar Questions

• How do I restart the question VCENTRE 5.5 device

  I currently have two servers ESXi VMWare vSphere 4 Essentials x and will upgrade to 5.5 soon and ongoing.

  I've already updated my server vcentre for the new device vcentre I have running on one of the servers very well.

  I have the new vsphere 5.5 client installed and works very well also.

  My question is this:

  If I stop the ESXi server who runs currently vcentre unit how can I vcentre restarted again when I go back to the server?

  Is there a way to do this because I don't want to be more than the time needed for maintenance I have to do on the server.

  I fear that I will get looked out and not be able to get the device vcentre began as there would be no way to do it.

  I would appreciate all your comments and thank you in advance.

  The vCenter Server Appliance can be cast on the ESXi host and any other virtual computer. Just use the vSphere Client to connect to the host on which the VCSA is registered and start it. Just make sure that you have both versions of vSphere Client installed on your system, one for the ESXi 4.x hosts and the other corresponding to your version of vCenter Server.

  André

• Where is the help on the topic: "restart with disabled modules.

  In aid of the menu choice "restart with disabled modules" is trying to find out what would be the consequences of this command, but I can't get any result on this SPECIFIC command. If I try, I definitely will disable my Add - ons?

  I have to ask this question because I've had nothing but problems with Mozilla Addons lately, especially the themes.

  I'm tired of Firefox

  Basically what the restart with disabled modules is it closes your Firefox and them it opens in safe mode, which is a temporary mode where all add-ons are disabled, and the settings are set to their default values. It helps you to be able to test and see if your question is without third-party variable. Then, when you close and restart firefox, it starts as before without Add-ons.

  Questions to troubleshoot Firefox in Safe Mode is an article that explains a bit more.

  What problems with modules you meet specifically?

• Unable to mount cdrom in RHEL4 guest vm & question with the vnic modules

  People!

  It is an ESX3.0.2 Server and I had weird questions, especially lately with the vm (s) of linux hosts.

  (1) impossible to mount the virtual CD in the vm (s) comments from linux.

  (2) due to the above question, the esx is impossible to get the cdrom of vmware tools on the guest virtual machine and therefore neither I am able to install or update the vmware tools.

  (3) I tried to change the settings of vm (connected cdrom; Connect to the power on) and I tried connecting to the host device cdrom and client device cdrom and none of these works. Tried to restart the guest virtual machine and no avail.

  (4) the existing comments vm linux with vmware tools installed, watch reference to the module pcnet32 the /etc/modprobe.conf with the vnic as e1000. Vmxnet shouldn't replace the vlance/pcnet32 module when vmware tools is installed? I checked the forums and KB Home, looks like this problem has been spotted in 3.0.1 and claims have been fixed in 3.0.2.Which is not true, as I see many people complain about that. The KB gives a solution for mounting the .vmx or linux comments vm (s) /etc/modprobe.conf (or) /etc/modules.conf to point the eth0 on vmxnet module. I'm not exactly sure if it would work and have not yet tried. Need your comments. (KB I mean is http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1001685)

  5)

  Any help would be appreciated. Please post your comments on the cdrom and the issue of vmxnet. Thanks a zillion.

  Hello

  Oh, I didn't know that you were using a 64-bit host. Yes, what they say is true.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

• My app store and some other applications not re-downloadable are a question mark and are not in my file programs, Please HELP IVE TRIED EVERYTHING! GarageBand does not open, there was a question mark through the icon, restart comp, all the question marks

  I opened my garageband, but I does not, because there was a question mark hollow garageband icon, then I restarted the computer, it normally restarted (whithout saying I restarted the computer because of a problem), and when it was made of built-in apps were question marks, were not in the program and "it is not found on the computer.

  Please help even the app store is broken and he asked me if I would choose a program from the app store when I tried to re - download from the internet, said yes and it did not work. Help, please

  The? means that the location for the file specified in the Dock cannot be found.

  You said "were not in the programs.

  Did you mean that they are not located in the Applications folder? Windows has a record of programs, not OSX.

  You said "when I tried to re - download from the internet, said yes and it did not work."?

  What happened when you tried?

  The missing applications are in the purchase of the Mac App Store section?

• Question about the common modules on my Tecra 8200

  I tried to install common modules on my tecra 8200 with windows xp family. When I restarted the pc, I had a checksum error. Time and date when changed. I got a lot of error messages. What can ido to fix this.

  Hello

  Checksum error is caused by the RTC battery and if a BIOS checksum error message persists, this may indicate that the RTC (CMOS) battery must be replaced. The CMOS battery can be replaced by the authorized service partner.

  It's certainly not caused by common modules. Other error messages have noticed?

• Question about the common Modules on Satellite Pro A60

  HI - first post!

  Looks like it's a bit a 'common' (see what I did there;)... too bad..) fault - but what driver file has these "common modules"? There is nothing in the list for the A60 Pro Sat that says "common Modules".

  Can someone point me in the right direction? Or is it just a case that they've got to be in the order of some? Will I have to uninstall all then repeat? Can I ask more questions?

  Thank you very much in advance,
  Phill

  Hello Phil

  Common modules is a kind of base for the other Toshiba application designed tools and utilities, and it must be preinstalled in a first time. Is very important that the common modules is not available for each laptop model. Why is that I can't tell you.

  I checked Toshiba download page and I didn t find listed common modules for your device, but I found the instructions facilities document. If you want to install the operating system on your own please install things in the right order.

  If you have any other questions, please write again.

  Good bye

• Questions: licenses and have the availability of the DSC module

  Hello

  I transferred to another PC development project. When I opened it, some of my shared network variables (NSV) have been marked with errors of functionality: "Initial value: not allowed or can not be changed outside of LabVIEW.". I found out it's because I didn't install the DSC Module on the newer machine. removal of the function 'initial value' made the error message disappear.

  That the error itself was not a big deal, but it made me think and study. http://www.NI.com/white-paper/4679/en says:

  If you want to use the LabVIEW DSC Module features, you must host variables shared on Windows. The LabVIEW DSC Module adds the following features to network-has published the shared variables:

  · History by connecting to the database OR Citadel.

  · Network alarms and alarm logging.

  · Scaling.

  · The user-based security.

  · Initial value.

  · The ability to create custom I/O servers.

  · Integration of the LabVIEW event structure with the shared variable.

  · LabVIEW VIs for programmatically control all aspects of the shared variables and the shared variable engine.

  Question 1

  I didn't know that the initial value function was part of the DSC Module. If I use it in a project, means that my client needs to buy a DSC run-time license? (I don't use another function DSC)

  Question 2

  In my project, the NSV in question was hosted on a target of cRIO, yet my prototype (which had an initial value enabled) was happily running without problems. This contradicts the above documentation that says «you must host variables shared on Windows» Should it?

  Question 3

  I created a new NSV on my new machine (which has not installed a DSC). I saw the option of "Graduation". Is scaling part of the DSC module or not?

  Question 4

  Initial value and the scale are generic features, not related to the control of monitoring/recording of data. Why are they in the DSC Module? They do not in the motor base of the OAS?

  Hello

  1 Yes, whole generation using DSC features require a run-time license.

  2. This is a recommendation for more reliable operations.

  3. No, it's a native capacity of LabVIEW. DSC module adds just more features related to communication protocols, alarming, etc.

  4 development, Yes. Scaling, no I think is for easy access. Old school method is shown in here to the section 'initialize Variables shared your»

  Visit this pagefor more information on DSC.

• Resume Quiz button goes to good question 1, but then displays the content between the questions in the module

  I am using Captivate 8, win 7 64 bit

  I have 4 modules with graded questions after each module. When I click on the Retake Quiz button on the failure of quiz, I got properly into question 1/quiz module 1. But after receiving questions from module 1, I am taken to the content of module 2. Etc.

  How to display only the questions about the failure of quiz? The revisions quiz option on doing just that - questions only - no intermediate content.  Why not the possibility to resume the Quiz?

  Thanks for your help!

  SMILES,

  Susann

  Sorry, it's the design of slides of the Quiz, fairly strict rules. You can replace it using a conditional or shared tip action on enter for each or the first, according to the linearity of the course, slide after a slide of questionnaire content. There is a variable cpInfoAttempts of system quiz that is incremented each time you click the button back. It has the value 1, the first time you take the test. If you create a condition like "IF cpInfoAttempts is greater than 1, you know you're in at the second attempt. At this point, you can jump to the first question slide in module 2.

• Question about the use of the memory modules

  I have a dilemma between the use of a new 1 GB memory (what I intend to buy) with more speed
  and by using the 1 GB + my old 256 with less speed
  which option will contribute more?

  Hello

  The fact is that if you use 2 different memory modules with different properties (of lower performance) so the laptop can run with lower performance. This means that the 256 memory module slows down you memory. The best way is to use the same modules having the same properties.

• Question module on the Qosmio series cooling F

  Monday night, I got an error on the phone saying that there is a problem with the laptop cooling and need to repaired.

  I disable the computer left cool turn it back on.
  After that I did the computer was very slow start.
  It took about 10 minutes only from the error to reach again once I turned off the computer.

  Last night I disassembled the laptop and cleaned both fans and blow out the dust from the laptop. I turn on the laptop and always take forever to start up the error text does not come again.

  This problem of fan grilled my CPU?

  In my opinion, the cooling module is malfunctioning and needs to be replaced.
  I wouldn't recommend doing no work around. I think that you don t have enough computing experience to disassemble a laptop Qosmio.

  Take it to the ASP. The ASP technician would be able to order the compatible cooling module and replace it.

  Greetings

• System Restore - question: the computer is not protected. Restart the computer and restoring the system running again. "

  When I run the SYSTEM restore, I get the following message: "the computer is not protected. Restart the computer and restoring the system running again. "I already did and it does not help.  I have Dell Windows XP

  Hello

  Try this link it may be useful you http://www.kellys-korner-xp.com/xp_restore.htm

  Under the heading, enable and disable the system restore... Reg fix?

  Also, it wouldn't hurt to run for malware, spyware, etc...

  Concerning

  GT4U

• When Vista restarts, get the error "users\...~\\ntload.dll-que the specified module is not found."

  Whenever I start Windows, I get error message users\...~\\ntload.dll-que the specified module could not be found.

  Hello

  To remove the error message if still there after the controls above to malware.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• A small question about the location of the images in the develop module

  It seems that when I finally registered my number of license/serial for my LR stand-alone version the other day some of my presets were given to a default setting. It used to happen that when I have a picture to keep or chose the indicator X he automatically jumped to the next image in the Strip who seem to move things. Now when I have the X flag or flag an image I have to use the right arrow key so that he can move on to the next pictures. I looked in preferences to change but didn't see a choice to change that.

  If you want to put on permanently in the library Module go to PHOTO > AUTO ADVANCE.

• After the clean boot get error loading awuspn.dll and load yabbyx.dll error. The specified module could not be found

  Hi Thahaseena,

  Thank you for helping! Finally I solve the problem of the error1324.but there were other questions come, after I did the clean boot and restart the computer then log, the window came several times put warn against the "Rundll":) 1 awuspn.dll 2) error loading yabbyx.dll loading error (both happened to uo WARNING several times). And boths display the message "the specified module could not be found. I tried to restore the computer to the State at the beginning, but it has no will to restore before the own boot.would you please help me to solve this problem again?

  Thank you

  Well, I want you to do is run MalwareBytes.  You say you already ran MalwareBytes after the clean boot, and then tried to reload regularly?

  Whatever program you have downloaded to fix the missing image file sounds like he came by malicious software.  What is the name of this program.

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.