Separate alarms which have different thresholds based on the system

Similar Questions

• How do you take a deposit which is different from that of the monthly payments?

  I have a client who is in British Colombia and moved to Infusionsoft.

  At that time there BC might not take a deposit which was different from that of the monthly payments.

  Whenever they would have to manually set up the payments. They do not want to manually set up the payments.

  Is it possible to automatically install these progress payments in British Colombia now?

  Hi Tim

  Support to this recurrent stage of payments (with a different cycle types - daily, monthly, annual, etc.) but not progressive payments BC.

  Silviu

• How to determine which files can be repaired by the System File Checker tool

  Original title: results of scan now

  I have scan now it says I have corrupted files, how to know what they are

  Hi Honey bunch,

  To determine which files can be repaired by the System File Checker tool, analyze the file journal program SFC.exe (System File Checker) generates. Follow the steps mentioned in the article below

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Xbox will not connect to xbox live and said "Uh Oh, seems to have found a bug in the system.

  So I went to a game on my xbox and it froze, I so stop my xbox 360 and turned it. When it was turned on it says not connected to xbox live, so I did the steps and plugged but it got to the last step where it connects to xbox live, and it said unable to connect to live. So I went on the xbox website and I registered and it says "Uh Oh, seems to have found a bug in the system and it tells me I have no friends and it does not display my photo on the site...» It happened once in October, but has not occurred again until now. I need help please to find what's wrong.

  Try Xbox support:
  http://support.Xbox.com/en-us/

• vROPs and SRM - protected Machines and placeholder VMs have different guest free space operating system

  Hi all

  Question: Home - health - screen 'one or more machines virtual comments file systems are running out of disk space' has different values for MRS. protect VMs and VMs placeholder.

  Someone has to meet a gap with machines SRM protected value of free space of different OS comments that the position expressed VM?   I've been enforcing a cleaning of the guests with < 5% free space.  When we clean up the comments, the alert is cleared almost immediately on the VM protégé (power on), but the position expressed VM is never a present according to vROPs value.

  Is this a known issue? Is the problem with SRM or vROPs.  Are the vCenters related with MRS supported?

  I'm under vRops 6.2.0.3528905 build 3528905.  We use array based replication and have a GB link between sites.  Replication occurs in less than 5 minutes, so this shouldn't be a problem.  I can still see the question once a day and VMS space have yet to synchronize or to get close in value to their counterpart protect VM.

  Thank you

  Luis C.

  So after a discussion with the SRM team and vRealize Operations Manager, has identified vRealize treated VMs placeholder as ordinary VMs.   The interesting thing is that when a failover test is running that hard drives are connected to the VM placeholder.  All the information from disk are ingested in the vCenter site recovery.   Later this was my problem.  I had to open a feature request.  If any of you are in the same boat please do the same so they'll add logic in to MRS.   At the moment my solution was to create a dynamic group for turning off VMs and join the dynamic group to a policy with disabled alarms.

• Apex 5 schedule: different color based on the value of data field

  Dear Experts,

  I need to have a different color for each record on the calendar based on the value of the data field (eg. category).

  How can I achieve this?

  Thank you!

  See: -.

  You don't have to wait for APEX 5 integration FullCalendar ~ Blog of Doug Gault...

• Redirect to different pages based on the value of linked report table

  Hello
  
  I wanted to navigate to different pages of a report link based on a value from the table on which the report is based. I was able to link to a particular page without any problem.
  
  But I wanted to link to different pages depending on the value in the table. Please let me how can know I do this?
  
  Thank you

  Kaminey wrote:
  I use Apex 4.2 and my report is a classic.

  If I click on empID in a classic report, now it redirects to page 1. Now what I want to do, if I click empID, if his role as MANAGER he should redirect to page 2 and fill out the form on the page with the details of the employee. The role of the employee is ANALYST should redirect to page 3 and fill in the form on the page with its details

  This approach makes maximum use of the APEX has standard and minimizes the extra programming.

  1. If it is not already included as a displayed value, include the role column giving the value of MANAGER/ANALYST as a hidden column in the report.

  2. create the link in the column on the EmpID column, with the target of the link on the same page as the report and ask the role column value (for example #ROLE #).

  3. on the page of the report, create a On Load: front branch to page 2, with an request = Expression 1 condition with 1 Expression defined for the MANAGER.

  4. on the report page, create a On Load: front branch to page 3, with a Request = Expression 1 Expression 1 ANALYSTvalue condition.

• Redirect to 3 different pages based on the value of the Auto complete field.

  Hi friends,
  
  I use a "Auto complete field" in a page for research (Apex version 4.0). But I need to get the values of the 3 tables and when you click on the redirection of the value to one of the 3 pages based on the value.
  
  For example, I have 3 tables. 1 customer 2 Sites 3.Employees. When I enter "c" in the search field, I need to get values of 3 tables in this area "AutoComplete". That is to say, if I have a customer with the name "cusotmer1", "customer2" and the location with the names of "cisc1", "cisc2" and employees with the name "cid1", "cid2"; When I enter "c" in the FQDN of the auto all 6 values must be given in the "AutoComplete" box and clicking on "customer1" / "customer2" need to redirect to the 'customer' page When you click on 'cisc1' / 'cisc2' redirect to 'site' when clicking on "cid1" / "cid2" redirect to the page of the employees. Is there a way to do this. Help, please.
  
  
  Kind regards
  NAV

  Net asset value,
  Here is a sample page that uses the code I proposed works fine for me with FF and IE (8.0).

  http://Apex.Oracle.com/pls/Apex/f?p=18:3

  Note: I've added a warning message before being submitted

  This page works by your side?

• Java Script to perform a different Action based on the Orientation of the Image

  I need help creating a Java Script to perform a different action based on image orientation landscape vs. portrait. Can someone help me in this task.

  Thank you

  The Wookiee

  That should do it.

  docRef = app.activeDocument;

  If (docRef.width > docRef.height) doAction ("Action of landscape", "action group '");

  another action ('Portrait Action', 'Action Group');

• Different calculation based on the drop-down list

  I'm trying to figure out how to change the formula of a derived field in the selection in an adjacent drop-down list.

  For a simple example, trying to find the total amount paid on a loan, would you go Total paid = capital + (main * Int * time). But you may pay more depending on if you pay a fee.

  So what I have works when I enter the formula in the field "Total paid", but trying to integrate the list drop-down for the fees (which is either "Yes" (value = 1) or "No" (value = 2)), I can't figure out how to add the tax, which is $ 50.

  In the drop-down menu, I like an output event:

  Switch (this.rawValue)
  {
  case '1 ':
  totalPaid.rawValue = capital + (Principal * (rate / 100) * time) + 50;
  break;
  
  case '2 ':
  totalPaid.rawValue = capital + (Principal * (rate / 100) * time);
  break;
  
  }

  Could someone take a look at this and tell me what I'm doing wrong? I'll post a link to the form that you can see the details (if I do this right!)

  https://Acrobat.com/#d=L7YF3np55Dc7aBOM46qITw

  Thank you!

  Hello

  You just need to use .rawValue to access the value of each object.

  Here is the form to the you: https://acrobat.com/#d=7J3ho * YeHyJzQLK1AEFtWw

  Good luck

  Niall

• Forms - submitting to different recipients based on the selection

  I have a form I need to present it to different addresses depending on the option chosen in one of the drop down lists. This MUST be done on a form on the client side.
  
  Any ideas on how to go about it?
  
  I don't want to create a different form for each scenario.
  
  Thank you

  You can set the action attribute of form with js as well. as murray said, this isn't the way favorite of doing things, but if it is your only way you can control the browser uses your username does work.

  
  
  

  Form

  
  
  option 1
  option 2
  
  
  
  
  

• I have a fatal error of the system on vista (Home Basic). Please help, it is said: __STOP: C000021a {fatal system error} initial session process or system _ ended unexpectedly with status 0x00000000 (0 xC0000001 0 X 00100450)

  That's what happened, I was using just disk defragment hard disk and since it takes a long time, I just left it alone and came to my laptop after a few minutes (about 15 minutes) and all of a sudden, I see my laptop is off.
  I turn it on again normally and after a while, the screen goes black and a blue screen with the message above appears. I press the "TURN OFF" button and it shuts down.
  That's the problem.

  I can not use safe mode or something, I tried everything in the F8 menu such as 'Last good known Configuration (Advanced)' and 'debugging '. Nothing works, all of this brings back me to the error message.

  The only thing I can do, is use the Startup Repair tool.

  It scans and tells me that he could correct errors, then I used the restoration of the system (to an earlier point), I haf 2 restore points but an error message appears and then they both became deleted. At the moment, I have no restore points.
  I can only use the command line Interface which directs me to "x: windows\system32\.

  I can use regedit (the registry editor). However, I tried another procedure step by step that earlier, I found that told me how to fix this problem, I typed in "System Root\System32\Drwtsn32.exe" and it says 'system is not recognized as an internal.... " »
  I also tried "System32\Drwtsn.exe" and he said: 'the path cannot be specified.
  I don't know what to do, I ask you is can you please help solve me this problem by using CMD and the registry editor. Please, thank you very much for your time.

  ADDITIONAL INFORMATION:
  My laptop...
  Windows Vista Home Basic
  1.00 GB of RAM
  AMD Athlon processor
  120 GB hard drive
  ATI Radeon X 1250 graphics card (that I could remember)

  It's strange, so you are always able to get into the safe mode command prompt is that correct? If so try to type sfc/scannow and see if it finds problems

  regarding the komodia, you can stop this cycle by quickly tapping F8 and select Disable automatic reboot after the system failuyre you should give the sfc/scannow suddenly too who could fix

  Oh and the reason for which you've entered in this thing drwtsn.exe and itt said it does not recognized is because you're not on the right track

  in any case I doubt that may help, but if you know you need to learn how to navigate your system using the command-line... pretty easy:

  CD means change directory

  If you type cd-it will take you to the root of the system

  so go ahead and type of

  Note that you are no longer in the c:\windows\system32 folder

  now type
  CD windows
  CD system32
  Drwtsn32

  Note that you can type the first few letters of a file or folder tab and press on to fill in the rest

  in any case, who should start the program that you try to start but I think that your better off trying to run the sfc/scannow command. Let me know how you go

• List based on the system date or time zone user

  Hello
  
  We have been questioning a service request list based on the timestamp created with criteria = today.
  
  But the result is inconsistent. Sometimes records created within today do not appear on the list.
  
  What is the definition of SOD ' today ' today '? It applies to the date system (time US) or Pacific time zone (for example the + 8) user?
  
  Thank you, SAB.

  Hi Sab!

  I did some tests and found that this is directly related to the user zone set on the user details page.

  I am with paris (gmt + 1) time zone, and when you go to the created SR list today, I have a lot of records.
  I set the time zone of eniwetok (gmt - 12). It is 11 now in france, therefore, with this zone, it is p 11 m yesterday.

  And when I went back on the list (after the closing session and connection), there is no trace!

  I hope it's useful!

  Max

  Published by: Max K on Nov. 16. 2008 19:35

• How to split the signal into small pieces (which have different lengths)

  I have a long waveform which is just a combination of a waveform, waveform 0 + one another + 0 +... I would like to have small pieces of the long wave form.  The problem is that I can't think at least detect the 0 value to separate them.  Any advice would be appreciated.

  

  How are generated segments of zero? They are exactly zero or zero average but with a bit of noise? You know the length of the segments of zero? Is it still the same? One of the waveforms have segments where real values are zero, and, if so, how long these segments is possible?

  My first thought is to use in range & force with limits just a little above and below zero. Verification of the length of a set of samples not in Range.

  Lynn

• view the different buttons based on the logged in user

  I have 2 buttons on page 8, HOUSE and ended UP, I'd like to display only one or the other of the user to the application-based.
  
  This arrangement allows the user to be directed to the appropriate page by right button display based on who the user is, guest or mhamil. Therefore, if the comments connects to the 101 page, then on page 8 the HOME button displayed for them to click to access the 2010 page. If mhamil connects to page 101, then to page 8 so the button COMPLETE poster for them to click on go to page 2001.
  
  I tried to create the two buttons like URL redirection with a target like this Application Page as an option. Then I put a condition.
  
  For the button COMPLETE, the condition type is 'value in the expression 1 = expression 2'. In the field of the Expression 1 I tried to: APP_USER and the value of the Expression 2 is mhamil. It did not work. The button FINISH were not demonstrating. I also tried setting in Expression 1: P101_USERNAME and the Expression 2 mhamil, but it did not work. The button FINISH were not demonstrating.
  
  The two buttons display unconditionally placed on them.
  
  Any ideas on what I'm doing wrong on my terms, I create?
  
  Thank you
  Maggie
  
  Published by: mjhamilton on December 8, 2008 10:16

  Maggie:

  Check if you are using an expression of type "pl/sql" condition works with the expression being

  Upper(:APP_USER) = "MHAMIL";

  CITY