SGD 10g: where the XML (e.g.60000155939.xml) files are stored?

Similar Questions

• where the daqmx on real-time target files are stored?

  Hello

  I'm working on an application that is embedded in a desktop RT target.  To make the system easier to maintain in the future, I would like to be able to generate a DAQmx task programmatically to the *.ini file exported from MAX.  In this way, users don't know what my code does to recalibrate the sensors or manage new material; they only know how to use MAX and where to store the files in config on the target.

  Where are the task daqmx, channel, and scale information stored on an RT target?  I have been through the files on the target you are looking for something that contains my task data but have found nothing, while dropping a node of system property in a VI running on the target will give a correct list of the tasks that I set up.  (The project that contains the aforementioned VI has no tasks in it IE: I do not import into the project.)

  Is there a utility that runs on the RT target that can generate a task at the time of the *.ini files exported?

  Thank you

  Exahustive keyword search led me to an answer on the forums.  I'll post here a brief summary in case someone else uses the same key words I.

  1 export the MAX configuration file

  2. write a VI that uses tools in the system palette to load the configuration on the target in real time.

  3 profit.

  In my case, the VI I wrote to download the config DAQmx also generates the configuration files for the screw on the side host and target, so everyone knows what is called tasks.

• The location of the XML file?

  Hi - Maybe it's a weird question, but I hope someone can help me.  I'm supposed to copy and paste the XML of my client on the server whenever it is updated through DW when connected to FTP.  So far, I have not been able to access the server, so I have no way of knowing exactly where the XML file.  This is the page which takes XML:

  http://www.gulfspillrestoration.NOAA.gov/oil-spill/Gulf-spill-data/

  I assumed that there is a kind of folder on the server that holds the file called "matrix".  For the life of me, after looking at the link above, code I can't well it say anything on a matrix file.

  In DW, I made a small test page and put in place a Spry data set and took a picture of the code [see below]:

  

  Spry shows clearly where the file is located in the photo above, but I can't find it on the link.  In addition, scientists are telling me that all I have to do is to download the XML through WordPress (the above site using WP CMS) but when I did it - downloaded the XML through WP - it is not too much to write the previous version but rather re - name (such as matrix1.xml).

  So I think the only way to download and replace a DW FTP access and copy and paste the new code XML on the server.

  Is my analogy this correct?  You can see the path I might be dominant in the page above that points to the matrix file?  I want to just make sure that the XML file is located on the link server in a directory above.

  Thank you.

  Sorry - I was referring to your second question on downloading the file with FTP. If you want to download it with WP, and then delete the existing since the first Panel to SUPPORT XML file.

• Problem with the date when you load the XML file into Oracle Database 10g

  Hi all
  
  I have the interface as shown in the screenshot below. In this document, among other things, I am mapping to an element XML file representing a date to an Oracle table column defined as DATE. The source and target columns are highlighted in the screenshot.
  
  ! http://img223.imageshack.us/img223/1565/odiscr275.jpg!
  
  When I run the interface, I get the following error message:
  
  java.lang.IllegalArgumentException to java.sql.Date.valueOf(Date.java:103)
  
  I guess that this is the conversion of the date!
  
  I already tried to replace SRC_TRADES. DEAL_DATE with TO_DATE (SRC_TRADES. DEAL_DATE, ' DD/MM/YYYY') on the implementation tab. This feature was not recognized when I executed the interface, so it did not work! The value of date in the XML file is in the format DD/MM/YYYY .
  
  I guess that Date SQL Oracle functions do not work in the implementation tab. Could someone let me know:
  
  1. what the Date Conversion function I could use instead?
  2. where can I find a reference to the methods/functions that I use in the implementation tab (if such a reference exists)?
  
  See you soon.
  
  James

  Hello.

  Try changing the area of execution at the staging area. Once you change it, write in the map box just SRC_TRADERS. DEAL_DATE. When you use TO_DATE, the source field typu should be varchar2, no date (as it is in store for your data source)

• Flatten XML does not record the names of the ListBox element to the XML file.

  On my front, I have a ListBox indicator that has strings that the user can select. Also, the user can edit items in the drop-down list to add new items. After that the user selects one and pushes my "Save" button, I use the flatten XML function to save the selection in an XML file. But Flatten XML saves only the value (the index of the selected items to the XML file and not the names of items in ListBox.) This is enough information to reconstruct from the string of data that the user has selected.

  A ListBox where a user is to select from a list of strings, flatten function XML should not also store the strings that have been selected?

  
  

• Passing values from a CO of a page in the xml file of a field with LOV.

  Hello

  I have 2 pages in this CUSTOMIZATION and the 2nd page got fields that have their turn to LOV.

  The query behind the LOV is sitting in the XML file and as an amendment to this motion, he needs some dynamic values

  I got to a stage where in the Commander of the 2nd page I set up values using getparameters.

  But how to pass this value from the 2nd page to the XML FILE.

  Thank you

  Regis

  Hi Regis

  Leave; s first focus on your first build errors. You said very well reconstruction work but compilation error comes when you run the page.

  It's strange. Can you please confirm if you have added the OFA libraries to your project. Ideally, they should be there once you create an OA project

  Concerning

  Marie Lise S

• load the xml file into a database to help table of travel point

  Hello

  Someone help me please with a possible approach. I have an interface for APEX users where users can download a file xml in apex table wwv_flow_files using the element to browse with a button "submit". Now, after loading the xml file in the wwv_flow_files table. I need to read and load the xml data into a table sample_tbl. I'm using the version of Oracle APEX 4.0 and Oracle 10 g R2 database. Here is an example of XML file to load. Please help me possible suggestions.

  <? XML version = "1.0" encoding = "UTF-8"? >

  < dataroot generated =... >

  < MySample >

  < KeyId > 1234 < / KeyId >

  eddskc < KeyName > < / KeyName >

  < scheduleDate > 2013-06-16T 00: 00:00 < / ScheduleDate >

  < StartTime > 2013-06-16T 08: 00:00 < / StartTime >

  < EndTime > 2013-06-16T 08:30:00 < / EndTime >

  < / MySample >

  < MySample >

  < KeyId > 5678 < / KeyId >

  jppdf < KeyName > < / KeyName >

  < scheduleDate > 2013-05-19T 00: 00:00 < / ScheduleDate >

  < StartTime > 2013-05-19T 08: 00:00 < / StartTime >

  < EndTime > 2013-05-19T 08:30:00 < / EndTime >

  < / MySample >

  < / dataroot >

  Thanks in advance.

  Thank you

  Orton

  orton607 wrote:

  My sample_tbl has a start_time field and its data type DATE.

  Good.  Be sure to always store dates as the DATE.

  The application (in this case, APEX) needs to format the date date type in the appropriate human-readable format.

  The problem with the incoming data is the 't'.  You will need to convert a space using REPLACE() in the framework so that your SELECT statement

  From there on, conversion to the DATE data type is simply

  to_date( replace( start_time_str, 'T', ' '), 'YYYY-MM-DD HH24:MI:SS') as start_time
  

  And, just in case where, the conversion of DATE for the desired format:

  to_char( start_time, 'MM/DD/YYYY HH12:MI:SS AM')
  

  Although, I'm 'hours' as being left-padded with zeros... Am I looking for how / if you can get rid of the zero prefix (0).

• How to insert data in the XML file?

  Hi guys,.

  How to insert information into an XML file. I tell you, I have a CFM file with some questions to the user

  When users submit this form within the form information is send in an XML file.

  How can insert this information in the XML file?

  When I don't have a DB?

  Thank you

  Kind regards

  Fabiano Magno Pechibella

  You must

  1. Read in the XML file
  2. Analyze the document in an XML (just one big struct) object
  3. Insert your XML code of the object where you need
  4. rewrite the XML file with your data now included

  You can Google 'ColdFusion working with XML' and find hundreds of items to help you. Here's a beginning tutorial to help you get started:

  Intermediate ColdFusion Tutorials - working with XML

• How can I parse the XML file using the Oracle's Sql query.

  Hi all
  I have an XML file that must analyze and display the result according to the following example
  Can you please recommend me an approach to get the result.
  
  For example, here is my XML:
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < xmlns:pi = "urn:com.workday / picof pi: Extract_Employees" >
  < IP: employee >
  < Additional_Information: pi > < pi: pi function: PriorValue = "" > Intern - masteri¿½s < / pi: function >
  < / pi: Additional_Information >
  < / pi: employee >
  < / pi: Extract_Employees >
  
  Databases:
  
  Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - production
  
  SQL > SELECT * FROM NLS_DATABASE_PARAMETERS;
  
  NLS_LANGUAGE AMERICAN
  NLS_TERRITORY AMERICA
  NLS_CURRENCY $
  NLS_ISO_CURRENCY AMERICA
  NLS_NUMERIC_CHARACTERS.,.
  WE8ISO8859P1 NLS_CHARACTERSET
  NLS_CALENDAR GREGORIAN
  NLS_DATE_FORMAT DD-MON-RR
  NLS_DATE_LANGUAGE AMERICAN
  NLS_SORT BINARY
  NLS_TIME_FORMAT HH.MI. SSXFF AM
  NLS_TIMESTAMP_FORMAT-DD-MON-RR HH.MI. SSXFF AM
  NLS_TIME_TZ_FORMAT HH.MI. SSXFF AM TZR
  NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI. SSXFF AM TZR
  NLS_DUAL_CURRENCY $
  BINARY NLS_COMP
  NLS_LENGTH_SEMANTICS BYTES
  NLS_NCHAR_CONV_EXCP FAKE
  NLS_NCHAR_CHARACTERSET AL16UTF16
  NLS_RDBMS_VERSION 10.2.0.3.0
  
  
  
  The Xml file above with UTF-8 character sets which is multi bytes.
  
  But in my character database is WE8ISO8859P1 for example ISO-8859-1 (single-byte character set)
  
  SQL > SELECT extractValue (Value (x) ', ' / pi:Employee/pi:Additional_Information/pi:Job_Title','xmlns:pi="urn:com.workday/picof ' ')
  TABLE (XMLSequence (extract (XMLType (bfilename('XMLDIR','XML_Issue_227176.xml'), nls_charset_id ('AL32UTF8')),'/ pi: Employee ',' xmlns:pi="urn:com.workday/picof"'))) x;)))
  
  
  which gives the following error:
  
  Error:
  ORA-31011: XML parsing failed
  ORA-19202: an error has occurred in the processing of XML
  LPX-00200: could not convert from UTF-8 encoding to ISO-8859-1
  Error on line 1
  ORA-06512: at "SYS." XMLTYPE", line 295
  ORA-06512: at line 1
  
  Also I tried with this
  SQL > SELECT convert (extractValue (Value (x), ' / pi:Employee/pi:Additional_Information/pi:Job_Title','xmlns:pi="urn:com.workday/picof"'),'WE8ISO8859P1 ', 'UTF8'))
  TABLE (XMLSequence (extract (XMLType (bfilename('XMLDIR','XML_Issue_227176.xml'), nls_charset_id ('AL32UTF8')),'/ pi: Employee ',' xmlns:pi="urn:com.workday/picof"'))) x;)))
  
  The same error is according to the above error message.
  
  Please help in this regard.
  
  Thank you and best regards,
  Sandrine

  You know the code of real character behind "" or you receive the file like that?

  For the record, "" is the wildcard of UTF-8 (0xEFBFBD), so that the original character of the means has already been replaced and that very probably the file was not coded properly in the first place.

  With respect to the resolution of the problem, try another method to read the file:

  SQL> select value from nls_database_parameters where parameter = 'NLS_CHARACTERSET';
  
  VALUE
  ----------------------------------------
  WE8ISO8859P15
  
  SQL> SELECT x.*
    2  FROM XMLTable(
    3         XMLNamespaces(default 'urn:com.workday/picof')
    4       , '/Extract_Employees/Employee'
    5         passing xmltype(
    6                   dbms_xslprocessor.read2clob(
    7                     'COP_DIR'
    8                   , 'XML_Issue_227176.xml'
    9                   , nls_charset_id('AL32UTF8')
   10                   )
   11                 )
   12         columns job_title varchar2(30) path 'Additional_Information/Job_Title'
   13       ) x
   14  ;
  
  JOB_TITLE
  ------------------------------
  Intern -  Master¿s
   
  

• Automation of several Flash file by using the XML file 'mailing list '.

  I created a Flash interactive multi-fichiers 'demo' for a client. It is very well as a Web site (although he doesn't use it as a Web site) in the way it is stated that there is an index page which can then direct you to product categories, which you can click to see. Each 'page' contains the product (or product category) information, photos, diagrams, etc. There is nothing of Flash animation.

  My client also wants to be able to put in place so that the demo runs automatically in a configurable XML file. My ActionScript skills are fairly limited, but I was able to by using ActionScript 3 to load and read XML file. A loop using 'for', I am able to read the XML file and returns the path of each Flash file and the time that each file must be displayed (my client asked that he able to configure the duration of each page as well).

  I created a charger for each video clip and a timer for the duration. Unfortunately, the thing that throws me off is that when I try to load the clip (as the last element in the loop for), it reads the entire XML file, returns all the clips and the durations (I use trace to see this) before loading the clip. Thus, the single loaded clip is the last reading of the XML file.

  As I said, I'm not very good at ActionScript, so everything I managed to combine was internet tutorials.

  This is my code:

  var xmlLoader:URLLoader = new URLLoader();

  xmlLoader.addEventListener (Event.COMPLETE, xmlLoaded);

  var mcLoader:Loader = new Loader();
  mcLoader.contentLoaderInfo.addEventListener (Event.INIT, playClip);

  var mcCurrent:MovieClip = new MovieClip();
  stage.addChild (mcCurrent);

  var xml;

  function playClip(e:Event):void
  {
  trace("Function:playClip");
  stage.removeChild (mcCurrent);
  mcCurrent = MovieClip (mcLoader.content);
  mcLoader.unload ();
  stage.addChild (mcCurrent);
  }

  function xmlLoaded(e:Event):void
  {
  trace ("function: xmlLoaded");
  XML = new XML (e.target.data);
  
  var cl:XMLList = xml.clip;
  for (var i: uint = 0; i < cl.length (); i ++)
  {
  trace ("Begin"for"loop");
  trace ("variable" i "is" + i);

  clipPath var = cl[i].@path;
  var delay = cl[i].@duration;

  trace ("Clip path is" + clipPath);
  trace ("Display for" + delay);
  
  mcLoader.load (new URLRequest (clipPath));
  }
  }

  xmlLoader.load (new URLRequest ("filerunlist.xml"));

  
  I removed the timer event because, like all the rest was repeated until whatever it is obtained, so I wanted to figure out out to get the charger clip (mcLoader) to load the clip for each file, before I realized where put in the time to make sure each element is displayed for the appropriate duration. I suspect that the timer event must occur in the function "playClip", but that it would take advice on that as well.

  Thanks to anyone who can help me understand this.

  You need to do in the service of parsing xml is just to store all data in a table.  You will use while an array element after another through some timer control you set up, access each file in the order that they are stored in the table.  You do not load in this function, all data storage, and when finished, the last line of this function outside the loop, fires at any function you have who begins to treat the first element of the array.

  For example, to store the data objects in the array...

  var clipData:Array = new Array();   store your data xml here

  var clipToShow:uint = 0;                   use later in the function showClip

  function xmlLoaded(e:Event):void
  {
  trace ("function: xmlLoaded");
  XML = new XML (e.target.data);
     
  var cl:XMLList = xml.clip;
  for (var i: uint = 0; i
  {
  clipArray.push ({clipPath: cl[i].@path, delay: cl[i].@duration});

  }

  showClip();
  }

  function showClip() {}

  Regardless of the process of loading .clipPath clipArray [clipToShow]

  and using clipArray [clipToShow] .delay to start some timer is involved

  the timer handler function calls this function when it is run

  clipToShow += 1;   increment the counter for the next clip online

  }

  If you are not comfortable/familiar with the approach of the object, then you could also store the clip and delay data in two separate tables.

• create table from the XML file at several levels

  Hello

  I'm working on the provision of an app to display xml data, which are currently using data from the settings file where the data was stored in a table.

  CONT =]
  [{txt: 'Perfume'} //main menu]

  [[{txt: 'Top Note', framework: 'topNote'}, {txt: 'Heart notes', frame: "heartNote"}, {txt: frame, 'Note of Base': 'gaps'}] / / submenu]
  
  ,[
  {txt: 'Packaging', field: 'packaging'} / / main menu

  ]

  ]

  I created an xml file and am able to recover data and impossible to find the same.

  Here's the xml file

  < Products >
  < produces txt = setting "Perfume" = "" > "".
  < = frame 'Top Note' = "topNote" txt file name > < / name of the file >
  < = txt file name ' heart notes"frame ="heartNote"> < / name of the file >
  < file name txt = "Core score" frame = 'gaps' > < / name of the file >
  < / product >
  < produces txt = framework of 'Packaging' = 'packaging' > < / product >
  < produces txt = framework "3D Animation" = "tvAd" video = "true" flvName = "video.flv" w = "547" h = "309" > < / product >
  < product txt framework "advertising Lla' = 'the package' = >
  < name of the txt-file = "Print Ad Creative Pack" frame = "printCp" > < / name of the file >
  < / product >
  < / product >

  AS A CODE

  ---------------------------------------

  (GlobalVarContainer.myXML is the place where is stored the xml file)

  var node:XMLNode = GlobalVarContainer.myXML.firstChild;
  var navItm:int = int (node.childNodes.length);
  for (i = 0; i < wheel; i ++) {}
  
  var temp_array:Array = new Array();
  var subnavCount:int = int (node.childNodes [i].childNodes.length);     subnav
  var obj:Object = new Object();
  obj.txt = node.childNodes [i] .attributes ['txt ""]
  obj. Frame = node.childNodes [i] .attributes ["frame" "]
  trace (node.childNodes [i]. Attributes ['txt'])
  
  for (var j: int = 0; j < subnavCount; j ++)
  {
  trace (node.childNodes [i] Sublst.ChildNodes(1).ChildNodes(0) [j]. Attributes ['txt'])
  obj.subtxt = node.childNodes [i] Sublst.ChildNodes(1).ChildNodes(0) [j]. Attributes ['txt'];
  obj. Subframe = node.childNodes [i] Sublst.ChildNodes(1).ChildNodes(0) [j]. Attributes ['frame'];
  temp_array.push (obj);
  }
  GlobalVarContainer.my_array.push (temp_array);

  }

  If I add - trace (GlobalVarContainer.my_array); -to code the outout is

  [object Object], [object Object], [object Object]
  [object Object], [object Object], [object Object],.
  [object Object], [object Object], [object Object],.
  [object Object], [object Object], [object Object], [object Object]

  but trace (.txt [i] GlobalVarContainer.my_array + "array"); or trace (GlobalVarContainer.my_array [i] [0] .txt + "array"); no results.

  need advice to move forward from here.

  Thank you

  AYUSH

  What I meant is that if you load the XML e4x, you have to analyze in a table to use it. You can retrieve the syntax of e4x XMLList and use it directly in your code. You can treat the XMLList almost as you treat any array using a for each loop for example.

  Take the code below as an example and adapt it to your needs:

  var mainMenu:XMLList = this.testXML.menu;

  for each {var menu: XML (in mainMenu)}

  trace ("Menu:" + menu.@txt);

  You can use your logic to create menu main point here

  var mynavItem:Navitem = new Navitem (0, spatie * i, GlobalVarContainer.my_array [i] [0], [i, 0], false, true);

  this.holder.addChild (mynavItem); ABLE TO VIEW THE MAIN MENU

  var items: XMLList = menu.children ();

  If (items.length () > 0) {}

  for each {var point: XML (in the points)}

  trace ("point:" + item.@txt);

  Logic of creation of subitem here

  var mySubnavItem:Navitem = new Navitem (dash, spatie * (i + 1 + j), GlobalVarContainer.my_array [i] [2], [i, j], true);

  this.holder.addChild (mySubnavItem);        DISPLAYS ONLY THE LAST ENTRY IN THE SUBMENU

  }

  }

  }

• Center aligning images in table using the XML file

  Hello
  I use a flash file that uses an xml file to download a series of images one by one in a photo-gate.
  There are two different widths of images. The height is always the same. Is it possible to set up so that each image that calls file xml is center aligned as part of image.
  At the present time when using the xml file to load the image she always left aligns the image when he brings it in image even if you change the alignment to center align in the Panel align.
  Does anyone have a suggestion why this happens or how to fix it?
  Thanks for the help

  I did this quickly and did not test - but if it does not directly at the exit it might give you a starting point - or someone else can correct if there are errors. I'll check tomorrow - where I am its time to go to sleep...
  CHANGE the DETAILS: Just changed a few pieces of code I posted last night - I forgot to change the statement holder_mc.loadMovie in xml.onLoad Manager. I have not tested, but its along the lines of the approach I would use to solve your problem with resizing the image. Let me know how you go with it.

• Extracting XML error. The XML file that is assigned in the configuration.xml is either incorrect or damaged.

  1. some web pages gives "error extracting XML. The XML file that is assigned in the configuration.xml is wrong or corrupt.

  2 Youtube gives, after having pressed the button start, message "an error has occurred. Please try again later.
  Even youtube opening page with IE, there is no problem.

  3. scrolling on Mozilla firefox pages only works with the sidebar not with the mouse wheel.

  Other user accounts on this computer is not these problems.

  BR Juha

  This can be caused by a recent update of Flash 11.3.

  See:

  • https://support.Mozilla.org/KB/Flash-113-doesn ' t-charge-video-firefox

• Where the license DRM for music files are stored

  Hello.

  I received an email from moduslink yesterday, they will ship vista in max. 3 weeks ;-) I wonder when I'll get it? But I found something else, I'd like to know:

  on the laptop with Windows XP pre-installed, there was these pre-installed music files (shared documents folder) with different music etc..

  I copied these files on my desktop-pc computer and (of course) the music is not played due to the absence of DRM-rights... (btw: I really hate this kind of thing DRM!)
  WindowsMediaPlayer 10MS on my desktop pc tries to download these DRM files, but cannot get a connection to a server. Probably because, I suppose, the right DRM of these songs is only stored locally somewhere on the laptop.

  On the laptop I have MediaPlayer 11 installed (I didn't want it, but I clicked OK for an update of WMP10 and did not know that it is just the upgrade to 11...).

  OK, with 11 WMediaPlayer, I guess, I can't save my license... files? ! ?

  Are the license files of these music titles stored somewhere on the hard drive? and where?
  Therefore, it would be best just to copy these files from my desktop pc license.

  I don't know if there is the same music-files included with Toshiba-Express-Vista-set at level - Programm (?)
  , so I want to store (including DRM files) on the desktop pc and then paste them to the laptop.

  you have a few tipps?
  Thank you, goodbye, kai

  Hello

  To my knowledge the DRM files has nothing to do with the operating system. The mp3 files must run on XP and Vista, but you know...
  I m not a music license expert ;) and can only suggest

  However, I studied a little on the net and it seems that the DRM files are stored
  in Windows 2000 and Windows XP in this folder:
  drive: \Documents and Settings\All Users\DRM

  In Windows 98 and Windows Millennium Edition (Me)
  drive: \Windows\DRM

  If you can't find the DRM folder, the exact location of the DRM folder on your hard disk is stored in the following entry in the Windows registry:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\DRM\DataPath

  That's all what I found, but if you want to get more info on the DRM please check this Microsoft Knowledge base article:
  http://support.Microsoft.com/kb/810422

  Good luck

• repair of iTunes - fusion of the xml files or combine libraries

  My iTunes xml I messed up a little bit and now all my old songs have the same Date added date, if they have been added to 4 years ago or on 02/07/15.

  Titles added after 02/07/15 have correct dates.

  I am trying to find the better (not necessarily the easiest) way to fix them.

  It is important for me because I sort my titles by date added.

  I have a huge library and can change them one by one in the xml file.

  I think that the ideal way to change the dates maybe with a script that would take the correct dates back to the old xml and replace the incorrect in the xml of the last.

  However, I do not have such a script, and I don't know how to write one.

  So my other option is to merge libraries.

  I will do this on a separate drive in order not to spoil the libraries either old or new.

  I have a bunch of backups, but had not noticed the problem posed by the until after all the backups had already been updated with new and incorrect files.

  I also have a fully functional library on a player removed from my MBP dead last year.

  So I now several copies of a messed library and an obsolete library containing the correct information.

  If I had to start with the old library I would need then to add all new titles that were added last year on my new computer.

  I can sort of filter by modification Date to clear the majority of them.

  I know that iTunes has a feature to add to the library , but before I use it I want to make sure that will accomplish what I am trying to do.

  I hope that someone with real experience in doing that reads my post.

  Useful suggestions of someone else is appreciated.

  Too bad (as if someone was actually going to answer).

  I have since discovered that the added Date cannot be changed.

  So now I have copied the old library on an external drive, made iTunes open this library, and then added everything in my current library which was not in the old library. I now have a library with the correct dates for the majority of the files, but all my files since August 2014 have now to the current Date added date.

  Better to have 16 months from the incorrect dates of 6 years.