Shutdown Equallogic in environment vSphere5.0

Similar Questions

• Design of network for VMware/iSCSI SAN

  I am currently reshaping our business network to take account of the variation between stand-alone servers and an Equallogic/VMware environment. We will use iSCSI to connect to the virtual machine to the San.

  My question is this. How a proper network design should seek this kind of deployment? I've specified my current hardware less than what I have to work with. Given that I can't pay by port / vlan database MTU value on the 3750/2960 should I dedicate a switch for iSCSI?

  Equipment available:

  Core switch/router:

  WS-C37560G-24TS-1U

  Stacked switches:

  WS-C2960S-48TS-L access switch

  WS-C2960S-48TS-L access switch

  WS-C2960S-48LPS-L voice changer

  WS-C2960S-24TS-L Server switch (dedicated iSCSI Possible)

  Unused stacked switches:

  Dell Powerconnect 6224 x 2 reference

  Servers:

  Reference Dell R710 Quad NIC

  Reference Dell R610 Quad NIC

  Storage:

  EqualLogic PS4100 with two 2 x 1 GbE controllers = 4 GbE for iSCSI

  Best regards

  Markus

  given that the same logic has two controllers that you will have to use a pair of switches to cross connect for redundancy. You are going to need some maps as well. 1 sc, 1 for vmotion, 2 for iscsi (cross connected) and probably 2 for the production traffic.

  Sent by Cisco Support technique iPad App

• ESXi ISCSI questions

  Hi all

  I'm trying to set up my ESXi with Dell EqualLogic SAN environment. I have a switch connecting servers and the SAN, but use an ID VLAN for ISCSI traffic. I SAN connected to ports which is assigned to the VLAN and servers vmnic0 so. I use vmnic4 to my network of mangement. I plugged my computer live VIRTUAL LAN ports and has managed to establish a connection with the ISCSI LUN. However, when I go to ping the ISCSI array on the ESXi host, it will not ping. I have the setup of the VMKernel port on vSwitch1 mapped the physical interface vmnic0, am I missing something, why can't I don't ping table.

  Yes, same segment. The IP addresses of 10.80.0.1 to 10.80.0.31 will be on the same network. As ESX learns that the management interface is on the San, if up communication there. You will need to place your management network in an IP address above 33 or change your San.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Technical Support Engineer

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• Restore windows xp to a predetermined on the reboot or shutdown environment.

  How to create a Windows XP environment that will allow storage and download for the duration of a user session, but automatically reverts to a default environment to stop?

  I want to install the default programs and allow normal use before shutdown or reboot, after which he will return to the default state, erase all the new files, registry changes, etc.

  I've seen this before and have used systems like that, but I do not know how to set up.

  Any ideas?

  Hello

  There is none of these tools released with Microsoft however, you can use your favorite search engine and find a.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.

• ESXi 4.1 upgrade 5.1 in a Dell EqualLogic environment?

  Hi all, I am planning to upgrade our guests ESXi4.1 U1 to ESXi 5.1 Dell R610.  We use a PS6100E EqualLogic via iSCSI.  I installed 5.1 vCenter and prepared Update Manager with the image of Dell Custom ESXi 5.1, thinking that it would contain all the necessary drivers/modules.  However, after analysis of my ESXi hosts, I get the following caveat (see attachment).  Anyone has done an upgrade from 4.1 to 5.1 in a Dell EqualLogic environment?  I'm not warm and fuzzy about the procedure taking into account the warning.  Thank you!

  

  Hello

  There is no requirement for reconfiguration of re - install MEM after the upgrade.  It lies on the existing configuration as before.

  My personal preference is to uninstall 3rd party before the upgrade applications to make the cleaner process.  I don't know problem to upgrade to 1.1.2 and then the ESX upgrade, I have not tried it personally.

• Clean shutdown for EqualLogic PS6100 without stopping the host/iSCSI initiator

  In fact, I've known the procedure on how to stop the Equallogic PS storage. But I have a question as well as the procedure.

  Do you really need to stop the iSCSI initiator or the host connected to the storage before you shut down the storage controller?

  Because we move the Equallogic box on the rack on the other. I just want to stop the Equallogic without stopping the hosts.

  Hello

  The hosts are connected to some other storage that you want to keep as you move the table EQL?  If you stop the storage, it is similar to pulling on a hard drive in its operation.  Most of the time nothing bad will happen.  But all entries that did not allow the storage is lost.   For applications such as SQL or Exchange is not something you want.

  If you need to keep the server up, stop all applications accessing the volumes, then disconnect all EQL volumes first, and then stop the EQL table.  Will be served waiting for the written word.

  Kind regards

  Don

• Connection of RDM on Equallogic PS6100 volumes to virtual machines.

  Hello.

  I have a weird problem on Equallogic PS6100 storage. Here hoping that I can have some kind of answer or advice to continue troubleshooting and, hopefully, a solution to the problem.

  Goal

  I need the RDM disks to be install on virtual servers through Equallogic PS6100. RDM disks will be used for Windows clusters.

   

  This is my environment infrastructure.

  1 unit of Equallogic PS6100.

  3 modules of ESXi 5.5 servers. (2 NICs connected to the PS6100)

  2 virtual machines running Windows Server 2012 R2 for windows clusters.

  I created 6 volumes on the Equallogic PS6100 but not able to connect 5 volumes on two windows servers. I need all 6 volumes to be connected to two servers as the RDM disks. Somehow the 6th volume gives me a problem that both servers are able to detect the LUN, but I can not install them. In addition, the connections are on ISCSi.

  Once I have installed the 6th volume on one of the server window the other server will be is no longer able to detect the LUN. This is why I can't install this volume on both servers.

  I tried scanning the LUN volumes on 3 servers ESXi repeatedly and still I can not install this volume 6 for both servers. I even migrated windows servers to 3 ESXi servers and always with the same result.

  All the advice here will be highly appreciated.

  Thank you.

  Managed to solve the problem of a work colleague. Problem has been resolved by adding a new controller scsi for the virtual machine. After adding the controller either stop or restart the virtual machine. In doing so, I was able to discover the LUNS and install the disc RDM for servers.

• EqualLogic PS6100X: direct connections (double) iscsi to 3 vmware ESX host

  Hello

  Due to the reduction of costs, we integrate

  1 x ps6100x Dell Equallogic (2 controllers to each 4 ports)

  3 x dell poweredge r720 (each have 2 ports dedicated for trafficking SAN storage)

  vSphere 5.5 (shared storage on the San)

  Without the use of SAN switches. Each host has dual direct connection (1 to each SAN controller) with the initiator iscsi software.

  We did before with Dell MD3200i, who has also 2 controllers and 8 ports, so we expect no problems.

  But now that I have read on the Equallogic, I'm starting to become uncertain if this Setup will work?

  I know that this is not recommended, but at this point, my only concern is that it will work (even with less performance).

  Can you please give me some advice on this?

  Best regards

  Joris

  P.S. If this is probably NOT possible, what would be the best/low average cost to make this possible?

  I've seen this failure at work, as in the connections dropped, BSOD was virtual machines with a single host with no switch.  iSCSI traffic tends to be very burst, which is having when the right switch pays you back.

  Re: 3750 X are those good switches, there is some adjustment settings that need to be addressed.  Also to solve a flowcontrol problem download the most current IOS firmware.

  For such a small group / number of servers, the stacked 2960 would be OK.  Perhaps to problems later if you need to scale this environment.  lack of 2960 allocate buffer, then you want to start without Jumbo frames, all enter into stable and of good practices.  So maybe later try enabling it.  3750 X works very well with Jumbo and Flowcontrol active BTW.

  These choices are better than no switch miles.  3750 x were pretty expensive last time I looked.  Unless you have a little already.  If you share them with the rest of the traffic that is not optimal, but at least put all ISCSI traffic on its own VIRTUAL local network.

  4948 are the right choice.  Some high-end HP switches.  Step away from the elders, like 2810 or 2824/48.  They seem to be there for cheap $$ but are designed for GbE Office not GbE iSCSI.

  Kind regards

• DCB - Force10 MXL and Equallogic PS6210 - worth it or not?

  Hello all

  I have a new 3-blade M620 virtualization environment, 2 x MXL Force10 switches and 2 x Equallogic PS6210 - there is the possibility of using DCB - is it useful to configure DCB, will I get the gains and better stability, or for a small environment should I just use the configuration standard iscsi?

  Ideas or alternative options gratefully received.

  Thank you

  Hello

  If the switches are dedicated for iSCSI use, then there is no advantage to the use of DCB.  DCB in itself does not have iSCSI faster.  I just made sure non-iSCSI traffic doesn't interfere by providing iSCSI with a higher priority.  All other traffic is going in a "lossy" class of service.

  Also, you will need DCB converged network adapters to use BCD on the hosts.  Most of the iSCSI software adapters do not support DCB.

  Kind regards

• Reattach the EqualLogic iSCSI for 2012 Windows volumes

  Hello

  We use EqualLogic, Windows 2008R2, HIT and initiator iSCSI access volumes. Now I'm re - install OS to Windows 2012. All materials, IP addresses, volumes, host name will be the same on the new operating system. BONES of some changes. Will it be the right way to remap the iSCSI volumes to the new operating system:

  1. on windows 2008 R2 take the volume offline in the disk management console.
  2. disconnect "Discovered targets" in the Windows iSCSI initiator.
  3 collect volumes offline in Manager Dell EqualLogic Group (to restore the connections).
  4. the new 2012 Windows Installer 4.5 HIT and set (is this version of the correct software for Windows 2012?)
  5 activate the volumes in the Dell EqualLogic Group Manager.
  6. Discovery target and connect to targets.
  7 collect volumes online in the OS disk management console.

  These steps are correct?
  Are they all necessary?
  Is a correct software 4.5 for windows 2012 HIT?

  Thank you

  Re: connections.  Are you referring to the iSCSI to table sessions?   If so, those are dynamic.  When you stop they will disappear.

  If everything is the same, so technically Yes.  Shutdown, you can reload and bring it to the top.

• Snapshots created with the EqualLogic VSS provider are not displayed in SAN HQ

  Hello

  Poster for the first time. We have just implemented an EqualLogic SAN, PS6100X network, and we're having performance issues between our DPM backup server, one of our hosts Hyper-V and VM images stored on the San. I will try to provide as much information as I can

  Environment:

  Dedicated iSCSI using Dell Force10 switches network

  hyper-V (Windows Server 2008 R2) 3 hosts
  -2 hosts has a NETWORK 4 port GB dedicated adapter connected to the iSCSI network; 1 host has connected to the network iSCSI NETWORK 2 GB dedicated ports card
  -Each Hyper-V host computer has a dedicated on the EQ SAN, RAID-50 volume that stores the Hyper-V virtual machines
  -EQ VSS provider installed on all hosts Hyper - V 3 and works correctly

  Using DPM 2010 for backup

  Problem: on Hyper-V hosts 1 and 2, any/all backup activities are very slow. On the Hyper-V host 3rd, however, activities related to backup all are incredibly fast! We compared the NIC configurations, HIT / settings ME and ASM, but we cannot understand why it is so slow on hosts 1 & 2.

  In addition, whenever DPM 2010 tells the EQ VSS provider to create a snapshot, we see the snapshot being created in the EQ Team Manager, but he does not appear in the list of iSCSI connections. According to the documentation SAN HQ, instant and volumes should appear here.

  We also disabled TcpAckFrequency for all 3 hyper-v hosts. It helped a little, but there is still a HUGE difference with regard to backups of the DPM.

  We're pretty sure that there is something misconfigured on the hosts Hyper - V 1 & 2, given that the host Hyper-V 3 has no performance issues.

  How can I get snapshots to appear in the list of iSCSI SAN HQ connections?

  Version information:
  SAN AC = 2.2.0.5924
  Storage Array Firmware = 5.2.4

  There are two different issues in this post for the SANHQ doesn't show only not iSCSI connections.

  Now SANHQ displays the correct total connection number but doesn't provide details of connections individual iSCSI for snapshots, which it should. So in the meantime use Workgroup Manager that shows the details for each snapshot (I know that's not the best answer, it's a short term solution).

  The fact the SANHQ shows details of instant connection does not mean that they aren't here and I can't imagine anything to do with the question of the DPM.

  The real difficulty, look for upcoming beta SANHQ and subscription for this on the EQL support site. You can do it now.

• The CSV on Equallogic DPM backup storage

  We have a cluster of Hyper-V connection to an Equallogic PS6000e CSV on iSCSI and have recently started to configure the Hyper-V virtual machine protection.

  The question that we see involves the backup expire (VSSADMIN list writers watch time out) and the event logs show iSCSI cannot connect to the target volumes. When I look at the Windows iSCSI initiator (2008 R2) we see all target communication successfully. SUCCESS tools are installed on each Hyper-V host and we have configured iSCSI targets to use CHAP authentication and IP restriction for the iSCSI network.

  If I disable the writer VSS Equallogic (DPM tempted to use it as a hardware VSS writer) backup of virtual machines Hyper-V succeeds by using the Hyper-V VSS software default recorder. Our option is to use only IP iSCSI access restrictions but do we need to provide the DPM server with one interface on the iSCSI network.

  I want to know is what are the side effects of a disabling Equallogic VSS writer using the /unregserver eqlvss on each node of Hyper-V and to return to the recorder VSS Hyper-V software (other than the impact on performance).
  Y at - it a component of the Equallogic SAN on a windows environment that awaits the Equallogic VSS writer to work?

  Not within the DPM.   This is known as an "off-host Backup" or "server less backup" programs such as Backup Exec.  (Called ALA)   NetBackup and Commvault support also, but not of DPM.    DPM cannot just "login", that is, the IP address and the qualified name full name to use.

  Generically, to do this, the backup sw, called Service VSS (Volume Shadow) to calm the system files and the flush cache.  When VSS will do that if our HW vendor's will connect to vss-control over table volume, select the volume, create the snapshot and return (in XML format), the name and IP address.    This information can be used to indicate the version of CLI, MS initiator iSCSI (msiscli) where and how much you connect to.   DPM doesn't have this capability.

  Also MS changed in W2K8 XML format, if the backup server must be the same operating system as the server to be backed up.  W2K3 or W2K8, you cannot mix them to disable the backup host.

  DPM will have to build software to manage the processing of the XML file and tell the iSCSI initiator to connect to.  Put the snapshot in offline mode, and then remove it when finished.   So not an easy task by any means.

• EqualLogic iSCSI connection limit exceeded - implications?

  We have an EqualLogic SAN iSCSI which exceeded the limits of iSCSI connections. The limit is 1024, but we in 1612. The thing is that nothing seems to be affected. We can still add LUN/servers etc. We are likely to hit the problems? A kind of performance problem? There only seems to be a lot of documentation to anywhere! We are firmware 5.2.2.

  I don't know what we can do to reduce the number of connections, I want to know, is what happens if we don't? Because I can say nothing serious happened. We ignore it? Panic?

  Hello

  Joe is correct, it is very important that you respect the limits of the support of the table.  For you convenience, I suggest you upgrade to EQL FW 6.0.4 and HIT or MEM products for later upgrade.  Firmware 6.x and products current EQL MPIO now work together to better manage connections.  Especially when you are above the limit.  This coordination allows to automatically reduce the number of connections.

  I wonder if you use VMware ESX?   We see quiite often with ESX.  There are a number of strategies to reduce the number of without loss of performance.

  Feel free to open a folder from supported with Dell.   We can examine your environment and make specific recommendations to correct this problem.

  It is very important that you take into account of this.

  Kind regards

• HUB & SPOKE environment with ASA5512 as the hub and ASA5505 spoke.

  I can't get the error. The phase 1 ends, then the errors begin, 7.0.0.2 no routine receipt notification message no proposal chosen, connection to peer 7.0.0.2 reason terminate remote proxy N/A N/A of local Proxy, 7.0.0.2 removing peer table Correlator has failed, no match, second being demolished requested reason user, Group 7.0.0.2 automatic NAT detection status remote endpoint is not behind the NAT device this end is not behind the NAT device. The other end the ASA5512 I get IP 7.1.0.2 no valid authentication not found for the Group of tunnel type, remote endpoint is not behind the NAT device, the DAP records selected for the DfltAccessPolicy connection, Phase 1 is complete, any IPSEC security association proposals found unacceptable IP 7.1.0.2 error of QM WSF, peer table correlator of withdrawal has not no matches , 7.1.0.2 session being demolished reasoning Phase 2 Mismatch, 7.1.0.2 disconnected session type IKEV1, recevied packet encrypted with no drop HIS matchin.

  I searched internet and found many results but as changes implemented I always end up back at this stage. Any HELP would be greatly appreciated. Two days lost in the LABORATORY. I'll post the configs. This a test soon to go into production. Thank you

  Ken

  ASA1 # executed sho
  : Saved
  :
  ASA 9.1 Version 2
  !
  hostname ASA1
  domain TEST1.CA
  activate 8Ry2YjIyt7RRXU24 encrypted password
  names of
  !
  interface GigabitEthernet0/0
  nameif outside
  security-level 100
  7.0.0.2 IP address 255.255.255.0
  !
  interface GigabitEthernet0/1
  nameif AS1toR1
  security-level 50
  1.0.0.2 IP address 255.255.255.0
  !
  interface GigabitEthernet0/2
  nameif AS1toR2
  security-level 50
  3.0.0.2 IP address 255.255.255.0
  !
  interface GigabitEthernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/4
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/5
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  management only
  nameif management
  security-level 0
  IP 192.168.1.1 255.255.255.0
  !
  passive FTP mode
  DNS domain-lookup outside
  DNS domain-lookup AS1toR1
  DNS domain-lookup AS1toR2
  management of the DNS domain-lookup service
  DNS server-group DefaultDNS
  Server name 201.201.201.201
  domain TEST1.CA
  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  network object obj - 1.0.0.0
  network of the object 2.0.0.0
  2.0.0.0 subnet 255.255.255.0
  network of the object 6.0.0.0
  6.0.0.0 subnet 255.255.255.0
  the 7.1.0.0 object network
  7.1.0.0 subnet 255.255.255.0
  network of the object 8.0.0.0
  8.0.0.0 subnet 255.255.255.0
  network of the object 9.0.0.0
  subnet 9.0.0.0 255.255.255.0
  the DM_INLINE_NETWORK_3 object-group network
  network-object 1.0.0.0 255.255.255.0
  network-object 3.0.0.0 255.255.255.0
  network-object 2.0.0.0
  network-object 8.0.0.0
  the DM_INLINE_NETWORK_4 object-group network
  network-object 6.0.0.0
  object-network 9.0.0.0
  the DM_INLINE_NETWORK_1 object-group network
  network-object 6.0.0.0
  object-network 9.0.0.0
  the DM_INLINE_NETWORK_2 object-group network
  network-object 1.0.0.0 255.255.255.0
  network-object 3.0.0.0 255.255.255.0
  network-object 2.0.0.0
  network-object 8.0.0.0
  the DM_INLINE_NETWORK_5 object-group network
  network-object 1.0.0.0 255.255.255.0
  network-object 3.0.0.0 255.255.255.0
  network-object 2.0.0.0
  network-object 8.0.0.0
  the DM_INLINE_NETWORK_6 object-group network
  network-object 6.0.0.0
  object-network 9.0.0.0
  Head of extended NETWORK allowed any one ip access list
  access-list extended hq vpnend permit ip object-group DM_INLINE_NETWORK_3-group of objects DM_INLINE_NETWORK_4
  access-list extended vpnend hq permit ip object-group DM_INLINE_NETWORK_1-group of objects DM_INLINE_NETWORK_2
  Outside_cryptomap_15 list extended access permitted ip object-group DM_INLINE_NETWORK_5-group of objects DM_INLINE_NETWORK_6
  Outside_access_in of access allowed any ip an extended list
  Outside_access_in list extended access allowed icmp any4 any4
  AS1toR2_access_in list extended access allowed icmp any4 any4
  AS1toR2_access_in of access allowed any ip an extended list
  AS1toR1_access_in of access allowed any ip an extended list
  AS1toR1_access_in list extended access allowed icmp any4 any4
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  MTU 1500 AS1toR1
  MTU 1500 AS1toR2
  management of MTU 1500
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  Access-group Outside_access_in in interface outside
  Access-group AS1toR1_access_in in the AS1toR1 interface
  Access-group AS1toR2_access_in in the AS1toR2 interface
  !
  router ospf 1
  network 1.0.0.0 255.255.255.0 area 0
  Network 3.0.0.0 255.255.255.0 area 0
  network 7.0.0.0 255.255.255.0 area 0
  Journal-adj-changes
  !
  Route outside 0.0.0.0 0.0.0.0 7.0.0.1 125
  outdoor 6.0.0.0 255.255.255.0 7.0.0.1 125
  outdoor 9.0.0.0 255.255.255.0 7.0.0.1 125
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  EOU allow none
  Enable http server
  http 192.168.1.2 255.255.255.255 management
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
  Sysopt preserve-vpn-flow of connection
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
  Crypto ipsec transform-set esp-3des esp-md5-hmac map-VPN1 ikev1
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 5 match address Outside_cryptomap_15
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 5 set pfs
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 5 set transform-set of card-VPN1 ikev1
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 5 the value reverse-road
  Dynamic crypto map DYNMAP 10 set pfs
  Dynamic crypto map DYNMAP 10 set transform-set of card-VPN1 ikev1
  Crypto dynamic-map DYNMAP 10 the value reverse-road
  card crypto Outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  card crypto HQ2REMOTE 10-isakmp dynamic ipsec DYNMAP
  interface card crypto outside HQ2REMOTE
  trustpool crypto ca policy
  Crypto ikev1 allow outside
  IKEv1 crypto policy 1
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  lifetime 28800
  Telnet timeout 5
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  VPN-addr-assign local reuse / deadline 30
  VPN load balancing
  lbpublic outside interface
  lbprivate AS1toR1 interface
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  allow outside
  No anyconnect essentials
  attributes of Group Policy DfltGrpPolicy
  value of 10.10.10.10 WINS server
  value of server DNS 201.201.201.201
  VPN-idle-timeout no
  Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client
  Split-tunnel-network-list value network
  value by default-field TEST1.CA
  WebVPN
  disable ActiveX-relays
  IPSec-attributes tunnel-group DefaultL2LGroup
  IKEv1 pre-shared-key *.
  attributes global-tunnel-group DefaultRAGroup
  LOCAL high school-authentication-server-group
  LOCAL authority-server-group
  NAT-assigned-public-ip outside
  IPSec-attributes tunnel-group DefaultRAGroup
  IKEv1 pre-shared-key *.
  NOCHECK Peer-id-validate
  authentication of the user IKEv1 no
  attributes global-tunnel-group DefaultWEBVPNGroup
  LOCAL high school-authentication-server-group
  IPSec-attributes tunnel-group DefaultWEBVPNGroup
  IKEv1 pre-shared-key *.
  NOCHECK Peer-id-validate
  authentication of the user IKEv1 no
  by default-group DefaultL2LGroup tunnel-Group-map
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory 24
  Subscribe to alert-group configuration periodic monthly 24
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:022709234965ad8943628e790ed5ed1f
  : end
  ASA1 #.
   
   
   
   
   
  ASA2 # executed sho
  : Saved
  :
  ASA Version 8.2 (5)
  !
  hostname ASA2
  domain TEST2.CA
  activate 8Ry2YjIyt7RRXU24 encrypted password
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  !
  interface Ethernet0/0
  switchport access vlan 14
  !
  interface Ethernet0/1
  switchport access vlan 24
  !
  interface Ethernet0/2
  Shutdown
  !
  interface Ethernet0/3
  Shutdown
  !
  interface Ethernet0/4
  Shutdown
  !
  interface Ethernet0/5
  Shutdown
  !
  interface Ethernet0/6
  Shutdown
  !
  interface Ethernet0/7
  switchport access vlan 4
  !
  interface Vlan1
  No nameif
  no level of security
  no ip address
  !
  interface Vlan4
  nameif management.
  security-level 0
  192.168.1.101 IP address 255.255.255.0
  management only
  !
  interface Vlan14
  nameif outside
  security-level 100
  IP address dhcp setroute
  !
  interface Vlan24
  nameif inside
  security-level 50
  6.0.0.2 IP address 255.255.255.0
  !
  passive FTP mode
  management of the DNS domain-lookup service.
  DNS domain-lookup outside
  DNS lookup field inside
  DNS server-group DefaultDNS
  domain TEST2.CA
  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  the DM_INLINE_NETWORK_1 object-group network
  network-object 1.0.0.0 255.255.255.0
  network-object 2.0.0.0 255.255.255.0
  network-object 3.0.0.0 255.255.255.0
  network-object 8.0.0.0 255.255.255.0
  the DM_INLINE_NETWORK_2 object-group network
  network-object 6.0.0.0 255.255.255.0
  object-network 9.0.0.0 255.255.255.0
  the DM_INLINE_NETWORK_5 object-group network
  network-object 1.0.0.0 255.255.255.0
  network-object 2.0.0.0 255.255.255.0
  network-object 3.0.0.0 255.255.255.0
  network-object 8.0.0.0 255.255.255.0
  the DM_INLINE_NETWORK_6 object-group network
  network-object 6.0.0.0 255.255.255.0
  object-network 9.0.0.0 255.255.255.0
  access-list extended vpnend hq permit ip object-group DM_INLINE_NETWORK_1-group of objects DM_INLINE_NETWORK_2
  Access extensive list permits all ip a REMOTEEND
  access-list extended hq vpnend permit ip object-group DM_INLINE_NETWORK_5-group of objects DM_INLINE_NETWORK_6
  Outside_access_in of access allowed any ip an extended list
  Outside_access_in list extended access permit icmp any one
  Inside_access_in of access allowed any ip an extended list
  Inside_access_in list extended access permit icmp any one
  pager lines 24
  Enable logging
  asdm of logging of information
  management of MTU. 1500
  Outside 1500 MTU
  Within 1500 MTU
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Access-group Outside_access_in in interface outside
  Inside_access_in access to the interface inside group
  !
  router ospf 1
  Network 6.0.0.0 255.255.255.0 area 0
  network 7.1.0.0 255.255.255.0 area 0
  Journal-adj-changes
  !
  outdoor 1.0.0.0 255.255.255.0 7.0.0.2 125
  outdoor 2.0.0.0 255.255.255.0 7.0.0.2 125
  Outdoor 3.0.0.0 255.255.255.0 7.0.0.2 125
  outdoor 8.0.0.0 255.255.255.0 7.0.0.2 125
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  network-acl REMOTEEND
  EOU allow none
  Enable http server
  http 0.0.0.0 0.0.0.0 management.
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set esp-3des esp-md5-hmac map-VPN1
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
  SYSTEM_DEFAULT_CRYPTO_MAP game 65535 dynamic-map crypto transform-game of card-VPN1
  Crypto than dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 the value reverse-road
  crypto HQ2REMOTE 15 card matches the address vpnend-to-AC
  card crypto HQ2REMOTE 15 set pfs
  card crypto HQ2REMOTE 15 set type of connection are created only
  card crypto HQ2REMOTE 15 peer set 7.0.0.2
  crypto HQ2REMOTE 15 map-VPN1 transform-set card game
  card crypto HQ2REMOTE 15 defined security-association life seconds 28800
  card crypto HQ2REMOTE 15 set security-association kilobytes of life 4608000
  card crypto HQ2REMOTE 15 set reverse-road
  card crypto HQ2REMOTE 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  interface card crypto outside HQ2REMOTE
  crypto ISAKMP allow outside
  crypto ISAKMP policy 15
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  lifetime 28800
  crypto ISAKMP ipsec-over-tcp port 10000
  VPN-addr-assign local reuse / time 5
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  interface ID client DHCP-client to the outside
   
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  SSL encryption, 3des-sha1
  WebVPN
  allow outside
  attributes of Group Policy DfltGrpPolicy
  value of 10.10.10.10 WINS server
  value of server DNS 201.201.201.201
  VPN-idle-timeout no
  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
  value of Split-tunnel-network-list REMOTEEND
  value by default-field TEST2.CA
  chip-removal-disconnect disable card
  IPSec-attributes tunnel-group DefaultL2LGroup
  pre-shared key *.
  attributes global-tunnel-group DefaultRAGroup
  LOCAL authority-server-group
  IPSec-attributes tunnel-group DefaultRAGroup
  pre-shared key *.
  IPSec-attributes tunnel-group DefaultWEBVPNGroup
  pre-shared key *.
  tunnel-group 7.0.0.2 type ipsec-l2l
  tunnel-group 7.0.0.2 ipsec-attributes
  pre-shared key *.
  NOCHECK Peer-id-validate
  by default-group 7.0.0.2 tunnel-Group-map
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:0d04273f55e788e2a4ad4d025084d33d
  : end
  ASA2 #.

  Mike

  It's been a while since I've done these on your ASA 9.1, you use the dynamic map called DYNMAP but you didn't say what the IP addresses are in function, IE. shouldn't you have.

  address crypto dynamic-map 10 DYNMAP  <--- you="" have="" multiple="" acls="" for="" the="" same="" thing="" so="" not="" sure="" what="" you="" want="" to="">

  Also you don't need all these additional channel for cryptographic subnets inputs pointing outward, IE. the default route is sufficient, but it won't hurt.

  Jon

• System could not find the environment option that was entered.

  The Trend Micro Client caused a bit of stir in my computer.

  He gave me the UiSeAgnt.exe error and I couldn't open any .exe files. I uninstalled Trend Micro and that pop up more rises. But the "System could not find the environment option/variable is entered" is yet to come when I try to run the .exe. This means that same cmd cannot be opened. I can not connect to the Internet independently wireless or wired. Audio system is not even the sense system speakers or external audio devices.

  I tried the system restore, did not work. I tried SFC/scannow, did not work. Now my current idea is to back up my files and blow the computer on with a clean restore. What should I do? I use a Vaio E series 14 p, btw.

  If it really comes down to it, how much memory should I backup everything?

  Hi Vey,

  Thanks for posting your query in the Microsoft community.

  Your system is connected to a domain network?

  This problem occurs in situations where Shutdown.exe cannot access the UserDomain environment variable. The task of the judgment which is on demand by using the at command runs under the system account. When the task is run under the System account, the UserDomain environment variable are not accessible because it does not exist. But the problem occurs mainly on the areas of server.

  I would suggest trying the following steps and check if these help to resolve the issue.

  1. start your system in safe mode.

  2. press on the Windows key + R.

  3. type sysdm.cpl , and then click OK.

  4. click on the "Advanced" tab

  5. in "Startup and recovery", click "Environment Variables".

  6. under "System Variables", click 'new '.

  7. for "Variable name", type in windir%

  8. for 'Value of the Variable', type in C:\Windows

  9. click OK on the all the dialog boxes that pop up.

  10. restart your system in normal mode.

  If, however, your system is connected to the normal mode, please see the following support article.

  Computer does not and you receive an error "System cannot find the environment Option that was entered" when you schedule a task of closing using the AT command

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.