Siebel for Communications / Web services / information can be recovered?

Similar Questions

• How can I fnd my claim code and the reprint of the web services information sheet

  Hi, I have a HP Deskjet 3520 and try to put in place the eprint.  I read the suggestions on the forum and the FAQ but I can't locate the web services information sheet I need to reprint for claim code.

  Could not find anything under Printer Control Panel either. Please advise!

  Thank you!!

  Hi Chris88,

  Welcome to the HP Support forums.  I appreciate that you try to configure the ePrint on your Deskjet 3520 printer feature.

  If you have the inkjet printer Deskjet 3520 with a C8994 product number this printer does not have the ePrint service.  The Deskjet 3520 printer only has USB connection and ePrint to function the printer must have an independent internet connection through a wireless or a wired ethernet network.  I've included the specifications of the printer for your reference.

  If you have the e-all-in-one printer Deskjet 3520 then we obtain the claim code.  You can request the information sheet of web services from the front panel of the printer, and there the claim code printed in blue. Instructions on how to get it can be found in the section titled "to print a document using ePrint' in your on page 15 user's guide.  Please follow the instructions in step 1.

  HP Deskjet 3520 inkjet printer specifications

  User's Guide e-All-in-One Series HP Deskjet 3520

• change the frequency for the web service

  I'm under LabVIEW Web Service with an application following the method shown in the example of weather monitor. But my problem here is that I have to keep clicking the Refresh button, then the Web Service can only update the latest data for me. Can someone help me to set an example on how to let the page Web of the Web Service automatically update the value without pressing the Refresh button. Thank you

  First of all your customer needs to support it. If you use the HTTP Client in LabVIEW (GET.vi and so on) you cannot use this method. A normal browser should.

  Take a look at the address book example FindContacts.vi.

  The help topic linked in the previous post, you should get on the way as well. The news are scattered throughout the help file, but it should be possible to understand.

  Basically, there are two output options for a web service VI: Terminal mode as used in the example weather and fashion such Stream used in the example address book VI.

  Use stream mode and build the HTML page yourself, then sends it to the browser with Response.vi write. Somewhere in the top of the HTML page, you need to insert

  If you need to return a string like

  
  
  
  
  
  If your browser supports Refresh,
  this page refreshes in 5 seconds.
  
  And add some real contents here
  

  See also W3C .

  Good luck

• Data for the Web service control

  Hello

  I have jdeveloepr User 12.1.3, I WSDL soap, I create the data control for the web service from the WSDL, the problem is when creating data controls the separate parameter that the method, for example, below it is the method that I call the setNotificationAction name and the parameter IN (P_ACTION, P_NOT_ID, P_PASSWORD_ERP, P_TOKEN (, P_USER_ID P_USER_ID_ERP), as below, why the separate parameter that the method?

  Note that I try the binding WSDL SOAP UI and its ok and works as expected.

  

  Resolved by changing the typesList.add (Object.class) at typesList.add (GenericType.class)

• What kind of Web services we can consume using Oracle integrated SOA gateway (REST/SOAP).

  Hello

  Someone can let me know what kind of Web services, we can consume using bridge Oracle SOA that is integrated (type Type REST or SOAP).

  Thank you

  -Vijay G

  Hello
  Using the Version of the EBS: R12.1.3

  .

  I found also that before R12.2.4 it only supports SOAP Web services and R12.2.4 supports both SOAP and REST.

  Thank you

  -Vijay

• Data control for the Web Service based filter table adf only appear not

  I have a SOAP web service I'm consumption as a web service data control.

  When I use one of the results of the web service through data to the web service in the form of a table control in the user interface with the filter and sort, I don't see the filters on the top of the table.

  It comes to JDeveloper version 11.1.1.7.

  Please let me know if anyone has an idea on this issue.

  TIA

  ABS

  You need connect your own logic on the filtering table.

  The table doesn't actually do the filter - it does, is the data control to filter the info - for a Web service we do not know how it will actually make a sort-, so you'll need to add a filterListener on the table and call a WS that will be returned the filtered data method.

• Changing the settings of data control for the Web Service with the company Manager

  We have different environments for the development, test, acceptance and Production. In the environment, we use different instances of the BSSV server so we have several points of endpoints for Web Services. When we move at the request of the ADF from one environment to another, we do not want to change the source code, but we want to change endpoints using configuration. We have seen that store them in Enterprise Manager, we can change endpoints and that this configuration will be saved in a MDS. But what precisely needs to be configured on the application to get this working? Now, we can change endpoints, but they are not saved.
  
  I found the information in this blog but it doesn´t work: http://blogs.oracle.com/adf/2011/02/changing_endpoint_url_for_a_web_service_data_control.html
  
  Joost

  Hello

  If you want to configure deployment position of connections, it is necessary for your application to be configured with a Repository.As of MDS in writing I'd mentioned in the blog too, for that you need an entry in the adf - config.xml and that your server must have a registered MDS store. Unless you are going to do this, the connection endpoint changes you make will not be saved.
  For example, at the end of the application, adf-config.xml file, you need an entry like this:
  .
  
  
  
  
  
  
  
  
  
  
  .
  When you deploy this application a server with a registered MDS, the deployment repository will bring up a dialog box where you can set(select/create) a partition for this app in the mds repository. Once your deployment is done, now if you change the endpoint using EM, it will save your changes.

  Vishal-

• best practices for the web service call

  Can I add a web service by using the standard data connection Wizard - works fine. I can also do it in Javascript which give me a little more flexibility. Is there a guideline or wisdom for which is better?

  Everything depends on your condition...

  For example, if you know your address Web service at the time of the design itself, then it would be better to put in the tab of data connection.

  But if your webservice address changes at runtime based on the environment in that your application is deployed, then you can use the java script code to change the webservice dynamically address.

  Thank you

  Srini

• Where should I place a SWC file that describes a complex structure for a web service?

  Hello!
  
  I am creating a web service in ColdFusion 9, which returns a complex structure or has a complex argument.  I'm placing the .cfc file that describes the structure in the same directory as the .cfc which uses the structure.  Right now just trying to get a wsdl.
  
  I have currently two functions in my .cfc, first returns a string.  The other ideally returns an array of strings.  Saying returntype = "String()" gives an error that ColdFusion could analyze no chain
  
  So I tried to make a type defined by the individual item being a string:
  
  < cfproperty >
  < cfcomponent name = "Info source" type = "string" >
  < cfproperty >
  
  ------------------------------------
  Is my code that uses this cfc:
  
  < cfproperty >
  < cffunction name = "getzips" returntype = "remote access" = "string" >
  < cfset #resultsCommaDelimtedZips # = "this is the result" >
  < cfreturn CommaDelimitedZips >
  < / cffunction >
  
  < cffunction name = "getInfoSources" access returntype = "at distance" = "InfoSources []" >
  < / cffunction >
  < / cfproperty >
  
  The error I get is:
  
  AXIS error
  
  Sorry, something seems to have gone wrong... Here are the details:
  
  Error - error trying to create the skeleton of Java for web service CFC. ; nested exception is:
  coldfusion.xml.rpc.CFCInvocationException: [coldfusion.compiler.ParseException: invalid CFML construct found on line 3 in column 1.] ColdFusion was looking at the following: < p > & lt; < /p > < p > the CFML compiler treated: < ul > & lt; marks the beginning of a ColdFusion tag. Did you mean LT or LTE? < /ul >]
  
  AxisFault
  faultCode: {http://schemas.xmlsoap.org/soap/envelope/} Server.generalException
  faultSubcode:
  faultString: error trying to create the skeleton of Java for web service CFC. ; nested exception is:
  coldfusion.xml.rpc.CFCInvocationException: [coldfusion.compiler.ParseException: invalid CFML construct found on line 3 in column 1.] ColdFusion was looking at the following: < p > & lt; < /p > < p > the CFML compiler treated: < ul > & lt; marks the beginning of a ColdFusion tag. Did you mean LT or LTE? < /ul >]
  faultActor:
  faultNode:
  faultDetail:
  {http://xml.apache.org/axis/} hostname:ntc15
  
  ----------------------------
  I have a similar problem if I use cfcomponent:
  
  < cfproperty >
  < cfcomponent name = "approved" type = "string" >
  < cfcomponent name = "total_charged" type = "string" >
  < cfcomponent name = "charge_error" type = "string" >
  < cfcomponent name = "renewed_until" type = "string" >
  < cfcomponent name = "reason" type = "string" >
  < cfproperty >
  
  http://livedocs.Adobe.com/ColdFusion/8/htmldocs/help.HTML?content=webservices_20.html said
  Note: If the files of the components are not in a directory under the web root, you must create a server web mapping to the directory that contains them. You cannot use ColdFusion mappings to access web services.
  
  So I tried putting the .cfc file in a directory under my folder wwwroot rather than inside.  That did not help.
  
  Any suggestions?  I feel that I did exactly what all the documents I can find tells me to do!
  
  Thank you!
  
  -Mabel :-)
  

  We work collaboratively with another company that makes the front-end server, by using the web service, so I need the wsdl show the kind of real data, not just "any", that is using what is 'array'.

  If I use your code (add a name for the echoStatus argument), I get

  How can I tell it a table of _strings_ specifically?

  ColdFusion is loosely typed, so I wonder if we can be so specific in the type of data, without resorting to Java for example. But then again, you will meet soon all sorts of complications. A ColdFusion array and an array of java are 2 totally different things. Run the following code and you'll see why

  
  #testArray.getClass () .getName () #.

  in any case, because the strings are is a subset of the type 'all', your service includes also the case where an array of strings is returned.

• Proxy for the Web Service URL

  Hi all
  
  I'm building a RESTful web service in an Apex 4 application references.
  I have a requirement to incorporate different web service URLS, depending on the environment (Dev, Test, Live etc.).
  
  I would like for this design so that Apex can pick up the URL from a substitution variable, and I'm not able to do this.
  
  Anyone can help with this, or suggest a work around?
  
  Thank you
  Rhodri

  Rhodri:

  The test facility certainly does not, even though this field is editable, so you can enter the actual URL under test. The substitution is done only when your application is running.

  Kind regards

  Jason

• Ideas for REST Web Services

  Hi all

  I have to migrate my CS 2.1 extension Builder CS 3.0 extension generator

  As I do the research I found that I had a few items that should be updated.

  A major is: my extension communicates to a web service of MS SQL. Which returns data in XML format.

  I was wondering EB3 does support any type of service such as PHP layer or can I communicate to WS via JQuery?

  I don't really know what is the best approach, or perhaps EB3 already has this built in.

  JQuery is supported? (I so wish the thing) is I should be able to ust that.

  Mike

  Here is an example of the things REST of class of service management:

  myServices.factory ('resService', ['$resource',

  {function ($Resource)}

  return $resource ("http: / server: 8080/objects /: objectID', {}, {}")

  query: {}

  method: 'GET ',.

  params: {objectID: 'objectID'},

  isArray: true

  },

  Update: {}

  method: "PUT."

  {params:{ObjectID:'@ObjectID'}

  },

  delete: {}

  method: 'DELETE ',.

  params: {objectID:'@objectID'}

  }

  });

  } ]);

  I hope this will help you!

  Best regards

  Thomas.

• How to create the channel listens for XML/web services line

  Hi, I'm new to B2B 11 g, would ask tht,.
  
  I followed the tutorial of B2B using generic file and it works fine. However,.
  If I want to receive the trading partner thought web XML server, how can I configure the channel look, what protocol to use.
  
  
  And can any1 kindly refer me to any link or info?
  
  Thank you.

  However... If remote partner is going to send me thought web services and no thought record, should I do something on my B2B? has I need specific, any channel listen extra?

  N ° no additional configuration is required to receive files via HTTP. Just ask your TP to post files on one of the below URL.

  http://hostname:soa_server_port/b2b/httpReceiver or http://hostname:soa_server_port/b2b/transportServlet

  If you just want to test your B2B, if it is correctly configured best way is to have another facility of B2B (may be a new domain) who will laugh at your configuration TP. This configuration of B2B send message to your B2B on HTTP (on one of the above URL) and see if gets treated with success.

  If you just want to test if your B2B is ready to accept messages over HTTP, then go to the URL above browser and make sure that you see below message-

  "B2B Server is ready to accept messages HTTP from the trading partner.

  Kind regards
  Anuj

• Handling of result for the Web Service

  I'm new to flex and was looking for the best way to show my web service result in AdvancedDataGrid.

  Could someone please take the time to spellout how to do this.

  I tried using the MXML approach and the code AS... I keep thinking I'm missing something.

  Basically, I went back an array of a custom object defined.  Everything in the object is a string, so it is not too complex.

  I am sure that my service returns a response that I checked with soapUI.

  So, how to map this result in an ArrayCollection collection?

  < mx:WebService id=" SRV "wsdl =" " wsDest "

  < mx:operation " name =" getGridData "

  Fault = "showErrorDialog (Event)" "

  result = "someFunction (Event)" "

  >

  < / mx:operation >

  < / mx:WebService >

  < mx:Script >

  <! [CDATA]

  Import mx.rpc.soap.SOAPFault;

  Import mx.rpc.events.ResultEvent;

  Import mx.rpc.events.FaultEvent;

  Import mx.controls.Alert;

  Import mx.collections.ArrayCollection;

  [

  Bindable ]

  public var myArray: ArrayCollection = collection new ArrayCollection();

  public function log(event:ResultEvent):void {}

  Managing for results.

  myArray = ArrayCollection (event.result);

  trace (event.result);

  }

  []] >

  < / mx:Script >

  My common error:

  Error #1088: The markup in the document following the root element must be well-formed.

  If I forget something?  Should I remove SOAP headers?  Any ideas?

  I tried the above approach among others... but would like someone to state a definitive approach to this.  Any help is greatly appreciated, thanks in advance.

  I'm sorry.

  I put a new Webservice usage example below.

  The first question and the problem is that creation collection ArrayCollection setting was wrong. You must specify is that this

  new ArrayCollection (e.result.toArray ());

  Example:

  
  http://www.Adobe.com/2006/mxml"layout ="vertical">
     
     
      Import mx.collections.ArrayCollection;
  Import mx.collections.ListCollectionView.
  Import mx.utils.ObjectUtil;
  Import mx.controls.Alert;
  Import mx.rpc.events.FaultEvent;
  Import mx.rpc.events.ResultEvent;

  [Bindable]
  private var categories: ListCollectionView = new ArrayCollection();
         
  private void search (): void
  {
  service.getCategories ();
  }
         
  private void result(e:ResultEvent):void
  {
  categories = e.result as ListCollectionView;
  }
         
  lack of private function (e:FaultEvent): void
  {
  Alert.Show (e.Fault.message);
  }
  ]]>
     
     
     
  WSDL ="http://feeds.adobe.com/webservices/mxna2.cfc?WSDL" >. "
          <>
  name = 'getCategories '.
  result = "result (Event)" "
  Fault = "Fault (Event)" / > "
     

  
     
     
         
         
             
             
             
             
         
         
     

• Conversion error in CFML arguments to the Java classes for the web service call.

  Hi all.

  I'm working on writing a small application that uses a web service that is provided by our IVR (Angel.com). I am able to connect, however, when I try to do something with complex objects, I get the error indicated in the title.

  He seems to have a problem with the table because when I remove it, or it becomes a simple string, I get errors on the function could not be found. I'm relatively new to web services, and especially dealing with complex data types, so any help would be appreciated.

  You can see my test page to

  http://webservices.fpitesters.com/AngelCalls.cfm

  I use the language WSDL can be found at

  http://www.Angel.com/outbound/WSDL/OutboundCallService.WSDL

  Some examples of code that does what I want to do in Java / Apache Axis

  http://www.Socialtext.NET/ivrwiki/index.cgi?java_sample_code

  Here is a description of the function that I have problems with

  http://www.Socialtext.NET/ivrwiki/index.cgi?placecall

  And my code is attached.

       <cfset email = "xxxxxxxxxxxxxxxxxx">
       <cfset pin = "xxxxxxxxxxxx">
  
  
       
       <cfinvoke webservice="http://www.angel.com/outbound/wsdl/OutboundCallService.wsdl" method="login" returnvariable="login">
            <cfinvokeargument name="email" value="#email#"/>
            <cfinvokeargument name="pin" value="#pin#"/>
       </cfinvoke>
  
       <cfdump var="#login#">
       
       <cfset Token = login.getToken()>
       
       <cfdump var="#token#">
       
       <cfset CallItem.maxWaitTime = 100>
       <cfset CallItem.phoneNumbers[1] = "7632344306">
       <cfset CallItem.siteNumber = 100041>
       
       <cfinvoke webservice="http://www.angel.com/outbound/wsdl/OutboundCallService.wsdl" method="placeCall" returnvariable="call">
            <cfinvokeargument name="Token" value="#Token#"/>
            <cfinvokeargument name="CallItem" value="#CallItem#"/>
       </cfinvoke>
       
       <cfdump var="#call#">
  

  If you are not initializing phoneNumbers tabular before adjustment

  It will be passed as a structure with a key of 1.  This could cause your conversion of argument error.

  So:

  Will result in

  struct
  MAXWAITTIME	100
  PHONENUMBERS	struct 1 7632344306
  SITENUMBER	100041

  Will result in

  struct
  MAXWAITTIME	100
  PHONENUMBERS	Table 1 7632344306
  SITENUMBER	100041

  -Jason Morgan

• Update the password for the Web service fails

  Hello

  OIM 11 g R2 (11.1.2.2) does not update the user password using the web services (version 11.1) connector.

  Following Oracle instructions described in http://docs.oracle.com/cd/E22999_01/doc.111/e38352/extnd_func.htm#CIHHJCHA

  In fact, it works in a test environment.

  Caused by: org.identityconnectors.framework.common.exceptions.ConnectorException: org.identityconnectors.framework.common.exceptions.ConnectorException: java.lang.IllegalArgumentException: invalid combination of offset/length

  at org.identityconnectors.genericws.utils.EncryptionUtil.encrypt(EncryptionUtil.java:81)

  at org.identityconnectors.genericws.utils.ConversionUtil.typeCast(ConversionUtil.java:247)

  at org.identityconnectors.genericws.GenericWSConnector.update(GenericWSConnector.java:387)

  ... more than 224

  Caused by: org.identityconnectors.framework.common.exceptions.ConnectorException: java.lang.IllegalArgumentException: invalid offset/length combination

  at org.identityconnectors.genericws.utils.EncryptionUtil.deriveKey(EncryptionUtil.java:100)

  at org.identityconnectors.genericws.utils.EncryptionUtil.initializeCipher(EncryptionUtil.java:108)

  at org.identityconnectors.genericws.utils.EncryptionUtil.encrypt(EncryptionUtil.java:59)

  ... more than 226

  Caused by: java.lang.IllegalArgumentException: invalid offset/length combination

  to javax.crypto.spec.SecretKeySpec. < init > (SecretKeySpec.java:148)

  at org.identityconnectors.genericws.utils.EncryptionUtil.deriveKey(EncryptionUtil.java:98)

  ... more than 228

  Enjoy your valuable advice!

  Best regards

  JD

  Resolved:

  Problem solved in reconfiguring connector WS with files bundle good connector - apparently, jars of installation used was not the last!