Spread out the default values

Similar Questions

• Maintenance of priority treatment of the elements out of default values

  Dear Experts,
  
  Can I keep my own personalized treatment of priority which will be obviously out of the default values. It will have a negative effect?
  
  Kind regards
  
  Muhammad Noman moomo

  What I wanted, it was, the balance will be finally completed at the end of the payroll. But the value of the balance may not be correct for the payroll.

  Say you have the following configuration-
  Basic salary = $1000 (priority 2000)
  Bonus = $500 (priority 8000)

  If you have an element of tax, with priority 5000, then the balance subject to the tax would be $ 1,000 at the time of the calculation of the tax and ideally should be 1500.
  The end of pay the balance subject to the tax would still show you worth $ 1500.

  Hope that clears your doubt.

  See you soon,.
  VB

• Re: Satellite NB305 - restore the default value of my internet browser

  I don't know where to post this request.
  Took forever to find words 'post new topic' and only clicking like to respond to a thread.

  I want to return to the default value of my internet browser.
  I know where to do it. Stupid question, but I can not display OK or apply in the dialog box.

  Does not show, you use a smaller font, or try to move the dialog box does not work.
  I actually want to google by default but tried in vain several times.
  Says I do not have seplt correctly but I http: identical www.google.com/ appears on my desktopPC.

  Question 2: Bought this in the United Kingdom but I live in Australia.
  How do I set up to reflect the Aussie not UK? Guess I have now will not kknow how to find answers to this.

  Also when I log in here the grey line saying profile connection House is in middle of screen so hard ro read the words above and below.

  > I want to restore the default value of my internet browser.
  What internet browser do you use? What is MS Internet Explorer?
  Internet Explorer settings can be defined by default very easily.
  Go to tools-> Internet Options
  You will find different tabs as general, security, confidentiality, etc.
  Visit the unique tabs and you will find Reset buttons or omissions.

  In addition, you can change the display
  Here, you should check out Style-> default Style

  > Question 2: bought this in the United Kingdom, but I live in Australia.
  > How do I set up to reflect the Aussie not UK? Guess now, I don't know how to find answers to this.

  I'm afraid, that I have no idea what you want to change it...

• How can you specify the default value for the undefined array elements

  According to aid LV, the tables have two default values, the normal default value and the default value for the undefined array elements.

  I assume that there must be a way to specify the default value for later, but I can't find it anywhere.  Any ideas?

  I know that you can drag the item out of the table container.  Change the default value on this scalar element.  Then drag the item in table tank.

• I can't have my Subvi simply use the default values for some of its entries?

  I use the code for a DS345 machine, using the sample code from here: http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9149659CE034080020E748...

  I use version 7.0 (because I'm in 7.1).

  Anyway. I managed to get the proper waveform I wanted, just stored waveform in the default values and frequency input, so I can some frequency I want input. When I run the example VI itself, it displays the waveform for the machine just that very well, however, when I use this example VI as a Subvi, it didn't come out of the machine data.

  Any ideas?

  Thank you

  Edit:

  When I say defaults for some of its entries, I mean the values that are usually connected by a user, controls that are not 'inputs' in VI.

  I understood the question, and I must say that I am embarrassed. If you look at the code, I'm feeding a resource VISA name, when the Subvi needs just a chain with the GPIB address number.

• Programmatically determine the default value of control

  Hello

  I'm trying to understand a reasonably sustainable method to detect if the sub VI input is wired.

  I use the approach to the definition of an absurd default for the control, and then by comparing the current value of the control to a constant of this value. If they are not equal, so I pass the value of the control in my registry to offset. If they are equal, I hold that any value has been previously in the shift register. In this case, I created a driving force that allows me to update the status bar.

  It works because my progress meter is a U8 I'll never write 0-100, so I can set my default to something outside this range (in this case, 255) for my comparison. Something similar should be relatively simple to understand and reuse in the future.

  However, there is a dependency on a person if the default value for the control and the update of the constant comparison to match. My question: is there a method to check the default value for a control programmatically in order to remove the coupling? I realize that any method would be invariably slower with regard to execution, but it's simply out of curiosity.

  

  I think that this method is reasonably justifiable if you document correctly and it works for me. Other developers do not tend to change the default values of the controls without reason.

  That said, the Control class has a default property, but I think it's private and it may not work when you generate an EXE file.

  If you want something that is more explicit, you can build a polymorphous VI - have one version of the VI with the entrance and the other without. The main problem is that users may not know that the entrance is there for them to wire without looking at instances of the polyVI, so I still prefer the method of the invalid value.

• BlackBerry Z10 well defined, I can't get the phone to ring and vibrate as the default value for all calls. I can put individual contacts, but I want to ring and vibrate for all.

  Although the value, I can not phone ring and vibrate as the default value for all calls. I can put individual to vibrate and ring contacts and it works but I want as the default for all incoming calls. Any help would be appreciated, thanks

  Sorry, I found the answer in the manual

  "Change your ringtone, sounds or alerts.

  GoTo settings\notifications to the bottom of the screen select application\phone

  You can activate vibrate out there, put the ringer default etc.

• Extension of EO or CO to set the default values?

  Hi all!

  I spread an EO, ExtBankAccountsEOImpl, which contains the bank details of a provider.

  When I create a new retail bank, I want to set the default value of some fields (for example the currency)

  According to the nationality of the supplier (all fields are null by default oracle). See below.

  

  Is this possible with EOs? Can the EO extended somehow get their hands on the party_id?

  Or do I have to extend the CO instead?

  Best regards

  Christian

  Christian,

  Thus, your EO extension works very well, no?

  You need to check the standard code (controller and methods of AM which is called by the CO) and see if the party_id is stored as part of the operation or not. If so, you should be able to get the values in extended OS.

  If this isn't the case, you must extend the CO.

  Note: Changes made by extension EO EO will affect all pages using the OS, if any other page exists.

  I hope this helps.

  See you soon

  AJ

• Remove the default value drop-down list

  I am currently working with Acrobat Pro XI version. I want to know if it is possible to remove the default value in a drop-down list.

  When the list less than 4 elements, it is possible to deselect the default value by pressing the spaces below. However, when there are no more elements, it is more possible.

  I read that you need to include white space as a component in the list of elements, however, then you will see an empty list item when people work with the pdf that is not preferable.

  So, nobody how to remove the default value in a drop-down list?

  Thank you!

  OK, I found a perfect solution to my problem by using FormsCentral for Acrobat. Here's what you need to do:

  Step 1:

  -Open FormsCentral

  -Create new form (choose the blank form)

  -Click the drop-down menu to create a new drop-down list

  -Fill out the items in the list by clicking on the timeline (you can also add a label if you want)

  -Click on: file > save as PDF form...

  Step 2:

  -Open the PDF saved (you will now see a blank pdf with a menu drop-down)

  -Click on: Tools > forms > Edit Form (when a pop-up window indicates that you should save a copy of the document in order to make changes, press 'Save a copy' and open the file with Acrobat pdf copy)

  -Select the drop-down list, the drop-down list to copy and paste it into the desired document

  Now you have a drop down without a default choice. Remember that you can not change the items in the drop-down list, because we will choose a default choice and you must use the copy pdf file once again. As long as you do not click on a list item, it is not choose a default choice.

  It is not a perfect solution, but it works for me.

  Good luck and thanks!

• If the default value in columns on slot form of table does not work.

  Hello
  
  I created a tabular form and I want to set some default values to columns that are based on the values of page elements.
  
  so I put the page element to the value of the column in the attributes in a table by selecting the value & P24_ISSUE_ID. default type as Expression PLSQL & DEFAULT function there but
  in the same way, I tried for the other column by selecting the type default as pl/sql expression and function by default the value & P24_CASE_NAME.
  
  but it throw an error of this type could not parse the SQL query: ORA-00904: "C254DB": invalid identifier
  
  I don't understand where I did wrong, I checked for the data types of columns, all right.
  
  so please help me out of this problem.

  1243 Tulasi wrote:
  for the first column

  I chose
  The DEFAULT TYPE as PL/SQL Expression & FUNCTION

  As the default * & P24_ISSUE_ID.* it is a number data type column

  2nd column

  The default Type as PL/SQL Expression & function

  As the default * & P24_CASE_NAME.* it's column of type Varchar2.

  Element (name of the page element or application) for the default Type and the name of the default item ( P24_ISSUE_ID, P24_CASE_NAME etc.) options appropriate for a default value for a page element.

  * & P24_ISSUE_ID.* is not a "PL/SQL Expression or function.

  but it throws an error, because this guy could not parse the SQL query: ORA-00904: "C254DB": invalid identifier

  What you're doing results in the engine of the APEX, P24_CASE_NAME 'C254DB' value in the default value and then try to assess this string as a piece of PL/SQL. Outside a block in which it is defined as a variable, constant, or a function 'C254DB' is not a valid expression of PL/SQL.

• The default values on the retail block for dummy record gets inserted in detail blk

  Hi all
  
  I have a master block
  a block of detail and a detail for detail block block
  
  For every master I have or have no certain records in the block of retail
  
  for each master, I have a few detail records
  
  for each detail record I may or may not have the corresponding detail records
  
  Let's take an example
  I navigate a primary record to the detail record.
  in the 3rd block of retail, there is no record for the record in detail, but I have some default values.
  
  Now I navigate to the 3rd block of detail and I do not insert records and then exit the screen
  
  Here oracle asks me to save all the changes I made (I did no changes)
  and by clicking on Yes, there is a dummy record is created for a 3rd detail record
  
  Please help me
  
  Thank you

  This is the default values are to mark the block as being changed. That's why you get the message "do you want to save the changes.

  I suggest that you fill out elements of the base with the default values table and fill out the matching elements from the base on a prior insertion trigger table.

• Creation of parameter: impossible to check the default values

  Hello
  I want to create new settings, and I want to give the user a set of default values. My problem is that for some fields, the 'default' value is available, but some other times this option is grayed out? Why?
  
  Thank you

  Hello

  I want to create some new settings and I want to give the user a set of default values

  the default value is only 1 and it is hard-coded.
  It is still available on the setting screen.

  My problem is that for some fields, the 'default' value is available, but some other times this option is grayed out? Why?

  I guess here, but when you say gray, do you mean the LOV are not?
  This list of values are called "Classes of elements" and that they are defined using the discoverer administrator, whenever an element class is defined, you will get the list of values for this element.
  You can read more about element classes here:
  http://download.Oracle.com/docs/HTML/B10270_01/item_cla.htm

  Tamir

• Using the default values in INSERT INTO... SELECT...

  Hello
  I want to do after insertion in Oracle 10 g
  
  INSERT
  IN tab1
  (
  x 1,
  x 2
  )
  SELECT
  NVL (Y1, default)
  Y2
  Of THE tab2
  
  but oracle throws missing expression error. I do not want to override the default values because it involves changing the code for any change of default. I guess Oracle transforms that SELECT tab2 while context, but is possible to carry out the INSET above?
  
  Published by: ponn_raj on January 14, 2009 04:52

  If you are going to need indeed a' by default-getter "function, I would probably go something like this."

  SQL>  create or replace function get_default(p_table varchar, p_column varchar2)
     return anydata
  is
     l_data_default_char    long;
     l_data_default_num     number;
     l_data_default_date    date;
     l_data_type            user_tab_columns.data_type%type;
     l_data_default         long;
     l_any                  anydata;
  begin
     select data_default, data_type
       into l_data_default, l_data_type
       from user_tab_columns
      where table_name = upper(p_table)
        and column_name = upper(p_column);
  
      if l_data_type in ('CHAR', 'VARCHAR2') then
        execute immediate 'begin :1 := ' || l_data_default || '; end;' using out l_data_default_char;
        l_any := anydata.convertvarchar2(l_data_default_char);
      elsif l_data_type in ('NUMBER') then
        execute immediate 'begin :1 := ' || l_data_default || '; end;' using out l_data_default_num;
        l_any := anydata.convertnumber(l_data_default_num);
      elsif l_data_type in ('DATE') then
        execute immediate 'begin :1 := ' || l_data_default || '; end;' using out l_data_default_date;
        l_any := anydata.convertdate(l_data_default_date);
      end if;
      return l_any;
  end get_default;
  /
  Function created.
  
  SQL>  create table t (
     a varchar2(5) default '',
     b varchar2(5) default 'null',
     c varchar2(5) default null,
     d varchar2(5) default '''',
     e date default sysdate,
     f integer default 1+1,
     g varchar2(3) default upper('a')
   )
  /
  Table created.
  
  SQL>  select column_name,
         get_default(table_name, column_name).accessvarchar2() c,
         get_default(table_name, column_name).accessnumber() n,
         get_default(table_name, column_name).accessdate() d
    from user_tab_cols
   where table_name = 'T'
  /
  COLUMN_NAME C              N D
  ----------- ---------- ----- -------------------------
  A
  B           null
  C
  D           '
  E                            15.01.2009 22:14:51
  F                          2
  G           A                                         
  
  7 rows selected.
  

• Firefox is the default value. Whenever I click on a selection of browser to URL is displayed.

  I've defined and confirmed that Firefox is my default browser. I uninstalled Firefox, restarted, set Edge as default, rebooted, reinstalled Firefox using the option 'Make Firefox the default browser' and rebooted. No matter what the settings are made and Firefox is default, when I click on a URL link, I get a dialog box "How do you want to open this file", Firefox is highlighted, I click on the check box always 'use this app' and click OK. Firefox opens and displays the page. Thereafter, whenever I click on a URL link I get the pop up and choose Firefox. It doesn't matter if a Firefox session is active or Firefox is closed. What I am doing wrong?

  This was a problem when you try to set one browser by default other than IE (now Edge) on Windows. Firefox has had the most problems over the years, trying to get himself defined as default browser. I can't tell if Chrome has had the same problem either. But I feel that they have had a hard time with her also.

  In the interest to see what works and what does not work, could you not install the Chrome browser and by setting the default value to see if it does indeed remain the browser by default when you click on any url? Please test the links of the opening a few times before you say that it works without problem.

  I'll be tracking of any workaround to set Firefox as the default browser in the meantime. But, be aware that Microsoft is the enemy here. As they do on board the default browser at any price.

• I want to organize the local folders. The default value is alphebetical.

  I want to organize the local folders. The default value is alphebetical. How do I do that?

  Install this add-on.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/manually-sort-folders/