Still have problems with animated menus?

Similar Questions

• HP530: operating system reinstalled, still have problems with updates

  Reinstalled Vista32 OS, on the advice of tech, to 'cure' MS update problems. Use recovery discs. (Recovery partition could not be installed for unknown reason) After reinstall MS update still has problems. Any help would be appreciated.

  After the reinstallation, an update was successful, and then Update Agent failed to update. A number of updates failed (? 10?) and a number have succeeded. Then a small model, only 1.9 MB, Service Pack 1 installed, and then after that check Udates runs, it calls to reinstall Service Pack 1. Again and again and again.

  Thank you, volunteers.

  Hello:

  See if you install the SP1 and SP2 standalone files gets you going to...

  You must install SP1 before installing SP2.

  SP1:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30

  SP2:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16468

• E4200 w 2 - re1000 and still have problems with wireless coverage

  I have a big enough House, 4500 square feet, and there a lot of bricks and stucko.  I wired ethernet ports in most of the rooms.

  For my Apple TV and tower PC, PS3, I used a wired connections.

  But we have a lot of devices without wireless, 4 laptops and 3 iphones, 3 ipads so good wireless coverage is a must.  I'm not looking for a budget solution, just the best solution that I can.  I also have a wireless baby monitor and an ATT Wireless TV receiver.  I have no end of problems with wireless on my devices.

  Without a lot of research I boght a couple re1000 thought that would be the solution to my problem, but they don't really work as well as I would like.  I wish I had done my research as I think that the right solution is to have the other AP in the connection from the House to a 'hand' AP via wired connection (connection wired bridge mode?).  I could adjust only force and channel to maximize coverage for the House.

  Here is what is a must:

  One SSID in the House

  Everything must be on the same network.  I have a wired camera Foscam and use the features of the homegroup in windows.

  Taking as a basis the e4200, what other should AP I buy to connect to the main via a wired connection?

  I don't know how to close your home is to other houses, so I don't know if you might encounter interference from 2.4 ghz to your neighbors or other sources.

  I see that WAP610 is not simultaneous... only selectable.  iPhones are only 2.4 ghz

  Whatever it is, you can keep the same SSID for your entire network, but you may need to use different wireless channels.  Everything meets your criteria above.

  The only unknown is your neighbors (and other sources) Wireless interference.

  You can download inSSIDer, which will give you a better idea of what you're against, but it is not infallible.

  http://www.MetaGeek.NET/products/inSSIDer/

• x 200 tablet, still have problems with smartaudio after driver conexant last updated.

  where the devil file complaint or tech support, whenever I call it, there are people who do not know jack whatever it is.

  I had an x 200 tablet, was seen problem with the beams stupid mistake that keep popping up.  then I updated my drivers conexant coming out who was supposed to address this problem. But it doesn't, it creates more problem.

  Now whenever it starts, an error with smartaudio.   so, it leaves me with 2 choices, or I used the former driver who does not mistake smartaudio. but the beam forming erro. or I use the new driver that will give me the error smartaudio.

  anyone has the solution let me know please.

  running, updated vista business sp2.  and Yes, I've updated all the drivers that I find unnecessary and causes more problems for me.  as the update of the thinkvantage system that made it useless until I have some file and add vista business sp2 in it.

  Yay what's up, I answer to my own problem tech.  I hope this can help some of you.  CUS we are ourselves since lenovo cannot help us with our problems. they should just all the fire so that they can sell their products cheaper. for the ppl who work there are unnecessary.

  "OK for people with the beam forming the problem, just go to c:\program Conexant delete folder there, it's to say" TOMY.

  reason for this is because it won't let you delete the folder of conexant all at once.  and remove it to ensure that the new drivers to install correctly.

  After that, simply download and install the latest drivers from the website of lenovo conexant.   Now you should get only the smartaudio error when you switch to Tablet mode or laptop.

  just go to the c:\program files\CONEXANT\SAII directory, rename the smartaudio and SAIIcpl to something else.  I just added a _ in front of her.  This way, whenever you change the mode it will not create the smartaudio error. and you can rename it back later if you wish, or if someone comes up with a better solution

  now, you might ask, how can we change the parameters for the smartaudio.

  If you really want to set that just go to c:\swtools\drivers\audioc\smaudio\smaudio, there is an icon that is smaudio.exe you can double click and run it to change the settings.

  After that, you should not get the beam forming or smartaudio error.

  Lenovo has probably screwed up on some instructions, which does not run programs properly maybe that happens to people with vista sp2?

  CUS, I noticed that when I upgraded to sp2, the thinkvantage system update will not work until we edit some file and add vista sp2 in it.  You can search the solution on this forum if you have this problem.

  Thanks and good luck

  just need to do an update, while this method a bit worked, sometimes when I start I always get the beam forming the error.  It's just that it does more every time I switch between Tablet and computer laptop mode, which is better than nothing for now.

• Still having problems with my perpetual license Adobe CS6 after CC

  Hi everyone, I still have problems with my perpetual license Adobe CS6 after upgrade to CC and terminate my subscription. I did it in October, and of course he had regained all my applications CS6, making it unavailable. I was advised to uninstall my Adobe (CS6 and CC) software and then reinstall my CS6 collection here. I did and as it has helped my Photoshop, all my other apps still get the same dialog box, I received before; telling me to renew my subscription to the CC. It will not happen, all I want is work and back collection CS6. Any help would be appreciated.

  After uninistalling cc, you should vacuum by the use of the Adobe Creative Cloud cleaning tool to solve installation problems, restart your computer and then install cs6.

  you might try starting the vacuum now (to clean the cc) after installing cs6 to see if that helps.

  Open your problematic cs6 programs, and then click Help > activate.

• Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

  Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

  Hi Matthew,

  If you use Bridge CC, update to the latest version 6.2. Adobe Bridge CC 6.2 version now available! Adobe content corner

  1. Please, do a right-click on the bridge on the desktop icon and select "Run as Administrator".
  2. If this does not help, reset the Bridge preferences and then try it.

  Steps: -.

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  Assani

• I have problem with my western digital portable HARD drive it still crashes!

  I have problem with my laptop HDD digital West sometimes when I plug it to my computer, my computer does not recognize it. But when he recognizes I can access the drive, but sometimes it is crash and restart once again it always happens... .this which should I do please help me! I have 9 a quick response...

  Other usb devices work on this PC?

  WD provides a free test utility, Data Lifeguard

  http://support.wdc.com/product/download.asp?lang=en

  http://support.wdc.com/techinfo/General/errorCodes.asp

• have problems with hardware acceleration of rendering: fonts looks terrible

  have problems with hardware acceleration of rendering (integrated gpu: amd 760 g) of one of the latest nightly updates - police seem terrible http://i.imgur.com/kWnySVv.png

  Note that the gfx.content.azure.enabled pref has more effect and you can try to disable Direct2D by setting the pref gfx.direct2d.disabled true on the subject: config page and leave hardware acceleration enabled otherwise.

  See also commentary 414 in bug 812695:

  • https://Bugzilla.Mozilla.org/show_bug.cgi?id=812695#C414

  This way you still have the advantage of hardware acceleration, but can not suffer rendering problems.

• I have problems with my iTunes account, I can't sign on the App Store and change my password, how can I fix it?

  I have problems with my iTunes account, I'm unable to download apps from the app store or any other product related to Apple. I changed my password and still does not work. How can I fix it?

  How and when did you try to connect for example you just enter the new password when you try to download something, or if you have completely connected exit since the change of the password and try to connect again: what to do when you have changed your Apple ID email address or password - Apple support ?

• I have problems with the Windows Update feature!

  I have problems with the function of update windows for KB2596598, KB2596744, KB2687310, KB2596786 with an error code of 80070641.  They keep for lack of update!  My current windows is Vista Home Premium! Do you have a solution for this?

  If System Mechanic is or has been installed, it is your troublemaker & you have lots of company!

  See my colleague Maurice RESPONSE message in this thread: http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

  If still no joy, contact System Mechanic (iolo.com) supported for assistance-, they are well aware of the problem application has caused!

  TIP: If you think that more never your registry database needs to be cleaned, repaired, boosted, to the point, healed, twisted, fixed, magnified, "swept" or optimized (and even more to convince that it is not), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• I think I'll have problems with registry - I can't add or remove programs, when I rebooted until windows starts I have SEEN 150/150 REGISTER... any ideas

  I had to restore my computer from these problems, had problems with wire4less router cause took off so wireless cause I got no internet.  Has worked with the provider, Charter and got back internet but do not add or remove programs - have problem with printer HP TrayApp, s if lack but cfan can't add restricted cause - restricted user-entered and gave access, but still does not work.  Will try F8 and start the repair to see if it works.  Any ideas?  HELP... l.Thanks

  Thanjs - I did take it to someone to clean.  Always have problemd with printer but am back to him.  Thanks for all your suggestions.  I guess I've done too many bugs diffedrent and messed up.

• So, my cousins both got two netbooks for Christmas so I took it upon myself to put in place. However, I seem to have problems with getting Homegroup to work.

  original title: incorrect Homegroup password

  So, my cousins both got two netbooks for Christmas so I took it upon myself to put in place. However, I seem to have problems with getting Homegroup to work.

  All computers:
  Have enabled IPv6
  Use Microsoft Security Essentials with the last update
  Are connected to the same router (Linksys WRT54GX2)
  Have no other third-party firewalls or AV installed and have been neatly eliminated via their respective tools when they had their
  Can be seen in the network and can access any other files via 'network '.
  Have the correct date and time and are all in sync with time.nist.gov.
  Have the same network sharing settings (network discovery on, files and printers sharing folders public, sharing, streaming, wide, 128-bit encryption, sharing password protected, to allow windows to manage the homegroup connections)
  Network is set at home, not in public

  The computer that has implemented the homegroup is connected via ethernet to the router while other computers use to access the router 802.11 g I tried to delete and redo the residential group as well.

  Despite all this, it is said that the homegroup password is incorrect for both netbooks (where it says it has encountered an error). I realize that it is case sensitive and I entered the password correctly. I also ran the resolution of the problems of the homegroup on all 3 machines and still no luck. I also tried to change the password and restarting of machines.

  Any suggestions? I was _really_ hoping it will work right out of the box. Maybe it's something with the router? I don't really know. Any help is appreciated. Merry Christmas! : D

  Hello

  check out this link.

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-create-a-HomeGroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

• Does anyone have problems with playback when editing v9.2?

  I have problems with playback when you change a small project (4 min).  I had a few problems on previous projects, but this one is particularly bad.   When I read my edition, the (unique) audio plays normally but video lags or freezes completely.  I can get around it temporarily by parts of the sequence rendering, but that's a lot of time and as soon as I make a change, the problem reappears.  I updated drivers etc. After reading the other reviews but it now becomes impractical, and I'm seriously considering whether I should continue with first or look for something more reliable

  PLUG

  Samsung Chronos i7 with 8 GB of RAM and a lot of spare

  WIndows 10 build 10586.218

  First Pro 9.2 zigzag

  Pilot of 640 M from NVIDIA Ge Force GT 353.90

  

  The only area I think needs expansion is the disk configuration.  Here's what I recommend as a starting point.

  C: Windows and programs

  D: project files, audio, and still images

  E: cache and Scratch

  F: media camera only

  G: export

  In addition, a form of backup solution in place.

  The above will give you excellent disk performance, spreading things to prevent the creation of a bottleneck.  It is based on the use of the HARD drive, simply because they always have the best bang for the buck.  But if you have the scratch for some good sized SSD, the situation changes a bit.  You could probably combine D and E on a single SSD and F and G on a third party, without slowing things down significantly.

• I have problems with my subscription to Adobe Stock.

  I have problems with my Stock of Adobe account. I tried to update my account for the past few weeks after getting my new debit card, once I noticed that 2 of my stock payments didn't cross it. (I was not on the stock of recent times) I've updated my card, he said thank you, now you can use your account... but it is always as I do not have. I contacted the chat and it reactivated my account charged $ 8,81 on my account and he said: I'm in charge again on 13 February for monthly salary. I even got an email saying that my account has been reactivated. When I went to concede a photo, he brought me to a new page to 'buy' the image, subscribe, ect... as if I don't have a subscription. I had Adobe Stock since last August and should have flight path so pictures since I have only licensed 25 of 40 images. These do not show either. I even tried to buy the week last with her still pending at Paypal. She wanted me to pay $10 plus ($49,95) to subscribe to a photograph of annual Adobe + stock, even if my last year does not expire until April. Certainly feel frustrated here. Is anyone having problems with the subscription?

  Hello

  The distribution of your Stock has been updated.

  Kind regards

  Bev

• I have problems with downloading the Lightroom app! What is the location of the appropriate installation?

  I have problems with downloading the Lightroom app! I have already many programs Adobe works on my PC and I have a cloud of Adobe license. But now, with the installation of Lightroom, I get the following error:

  Exit code: 7

  Please see specific errors below for troubleshooting. For example, ERROR: DF014...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s)

  -Payload: Adobe Lightroom 6.0.0.0 {8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}.

  ERROR: DF014: unable to create the symbolic link to ' \\XC-DC-01\Users\Patricia\... \Desktop\Adobe Lightroom.lnk "(Seq 6641).

  When I go to the solution, then it says: rerun the installation. Select a different installation location.

  
  

  But I tried to select all the other folders on my computer for the last two weeks and it still not working? Update other programs is not a problem, then I don't understand what goes wrong? What is the location of the appropriate installation? Why it changed on my computer?

  Can you help me with a solution? Thank you!

  Hello

  Please see Exit Code 7 Installing and errors ' Exit Code: 6 "," Exit Code: 7 "|"» CC, CS6, CS5.5

  Hope that helps!

  Kind regards

  Sheena