Stuttering Ken Burns

Similar Questions

• keep endpoint of Ken Burns

  I'm sure I'm missing something completely obvious, but here goes: I cut with a razor, a bit of a clip in a timeline, then apply Ken Burns to this article, I cut, but I want him to stop and stay at the end of the effect, beyond the Cup, I did. How do I do that? Thanks in advance.

  Go to the last image in the Ken Burns effects and use modify > add Freeze Frame Opt - F.

• iMovie ken burns effect blocking

  version of iMovie 10.0.9 to apply the Ken Burns effect on photo, loss of definition occurs (blocking), but only during the movement of the effect. To stop the movement, the image completely covers the definition.

  If anyone has this happened, I'd appreciate it tell me it solved.

  The computer is a Macbook with Yosemite 2010 of the installed operating system.

  When you use the effect Ken Burns on a photo the computer must do a different culture on each image.  The definition of poor in the viewer while playing in the timeline generally because the computer is not fast enough to be able to view the clips high definition and real-time effects.  To continue, we must reduce the definition on the screen.

  The good news is that if this is the reason that it will not affect the quality of the shared video.  Try sharing in order to verify that this is the case.

  Geoff.

• In Final Cut Pro, Ken Burns my button does not appear when I click on CROPS

  I try to use the Ken Burns effect to a clip in Final Cut Pro. Tutorials tell me to click the CROP after selecting my clip. I've done several times and the button of Ken Burns is supposed to happen. This isn't. Can anyone help?

  What version do you use? Click on the popup at the bottom right of the Viewer to select trim, and post a screenshot of the Viewer.

• Ken Burns still grayed out picture

  I want to be able to hold the last image of a photo in a Ken Burns effect zoom for a break on the topic of the effect. When I try to freeze the last image, "freeze frame" is grayed out. I tried to add the same photo after the first without the KB effect and cropping to match the last zoom, but it is impossible to match exactly and takes too long. I searched high and low for a solution. Is it possible to do in iMovie?

  Freeze frame only works for video clips.  How to proceed for still images with Ken Burns is to put a copy of the clip after the first clip.  With the copy highlighted, click on the crop tool, and then you will see the parameters of Ken Burns.  Click on the arrows 'swap ':

  

  and cultures beginning and end are interchangeable and the departure will perfectly at the end of the original item.  Now, all you need to do is set the end to be the same as the beginning.  Even if this is not correct, it will be noticeable.

  Geoff.

• Ken Burns effect on the large picture, keeping the full quality?

  Hi, I have a few high ground always images to add to a video with a simple Ken Burns effect. I would like to keep the really high quality to zoom in, is there a way to do this, IE select the photo source rather than to import them when he has reduced the size of the project (a bit like Avid pan and scan function)?

  Thanks in advance

  TThis image is imported at full resolution. When it is put into a project, it's default scaling to fit this project, but its resolution is not diminished somehow. You can use Ken Burns to create an animation or the function of culture/culture or the scale and position to crop. The image is always at full resolution.

• How can I add a Ken Burns type transition between slides?

  I can't find a way to have the Ken Burns transition type?   Is this possible?

  It's just an effect of reposition and scale on an image;

  You will need images with a resolution high enough to deal with the intensification of the image.

  Click on the image on the slide: Inspector > Animation > Action > add effect > scale

  then adjust the position and scale of the image 'ghost' as required

• How to use ken burns in a still video image?

  I have a video clip. I move the playhead to a point in the clip and split the clip. I then do a freeze frame of the end of the first part of the split clip. This is where I met my problem. During the reading of the judgment on image, I want to zoom in on a region of the freeze frame, for example a face in a crowd, I want to stay zoomed in for a period of time and then zoom out to full frame, and then continue with the rest of the split image.  How can I do this? I tried to use Ken Burns but could not do work, I could zoom in but not hold the zoom, then zoom back.  Thank you.

  To do this, use three consecutive copies of the still image.  Implement effect of the Ken Burn to the still picture to zoom in.  Now add a copy of this clip and reverse images of beginning and end of the Ken Burns effect by clicking on the double arrows in the Style far right button (see screenshot).

  

  Now add a copy of a clip between the two clips and adjust the large frame of Ken Burns while she superimposes one smaller.  This gives you the extended break.  Adjust the length of the three clips and you're done.

  Geoff.

• How to handle small size photos in first for Ken Burns effect

  Hello, I know how to do the Ken Burns effect in first, but don't know what to do with the images that are smaller then 1920 x 1080 sizes.

  They are photos of the 60' and 70's and if I blow up picture size or to do the Burns effect, they are falling apart.

  I see people using photos really very old that look always good.

  How can I put them when they are low resolution or more small size?

  Thanks, J

  If the images are old, then their existence as a real film prints.

  Rescan them at a higher resolution.

• Ken Burns effect of * wide * image?

  Hi all

  I tried a quick search, but not yet found an answer.

  I want to create a pan "Ken Burns" of a very wide image in Premiere Pro, but can't see how I can do anything with other than a 1920 x 1080 image.

  I basically need to start with a larger picture (let's say for now, 3840 x 1080 so double-width Full HD but standard height) and I want to start with the left side and create a scrolling to the right to finally show the entire width of the image.

  I certainly don't want to zoom in on the image - the image already will be at the necessary exact height, I just want to view a panoramic image which can obviously be made only in HD ratio if I scroll on it. (So thinking that it is running a magnifying glass over the entire width of a photo)

  Can someone point me to info on how to get there? I can manage it with a 'standard' imported picture using zoom etc effects, but it crops still nothing I have import up to 1920 x 1080, which is not good for me.

  Thanks in advance!

  Create a sequence of 1920 x 1080.

  Import your picture of 3840 x 1080.

  Place the image of 3840 x 1080 on the timeline.

  Click on the image on the timeline to select it.

  Once selected, move the effect controls panel.

  Click the triangle next to the query to see the commands.

  Set the scale to 100 (unless it is already set to 100).

  You should see just the central part of the image in the program monitor.

  Move the playhead on the timeline at the beginning of the clip (keeping the selected clip).

  Return to the effect controls panel and change the horizontal Position to where you want to start panoramic image.

  When you have the image in position, click the icon of stopwatch bit next to the position of the world. It will turn blue and and put a keyframe on the timeline of the effects.

  Now, move the playhead in the timeline to the last image in the image on the timeline (keeping the selected clip).

  Return in the effect controls panel and modify the horizontal position at the end of the pan. It should automatically create a second keyframe.

  Now, you can read the timeline and see the pan. Depending on the power of your computer, you may need to make the effect until you can see smooth,

  If you want to make the start and stop of the boom of pan, select the keyframes in the effects for Position Panel and right-click on them. In the menu select temporal Interpolation > Auto Bezier.

  MtD

• Is it possible to apply the Ken Burn effect to a slide show brought her another slideshow on your site?

  I have several slideshows on a current site that I am working on, but I want just a slide have the Ken burns effect. When I placed the widget on my site all my slide our hit show. Is it possible that you can designate what show you want to have the effect go?

  Unfortunately the slides in the show can be applied with different effects, they would be same for all slides.

  Thank you

  Sanjit

• Sequences of images - they are heavy in file size? Alternatives to a Ken Burns effect?

  We are building a digital magazine for a client who has about 50 performances. Each show has about 3-5 images which would like to see featured in Ken Burns style, a kind of zoom/pan slow and then it fades to the next image that also pan/zooms. This must be done in the background of any content above. My solution at the beginning was to simply do a sequence of images and have it loop. This allows me to have the content above as a MSO.

  My application is currently to 212 MB with a bunch more pages before that... I wonder how much weighs image are sequences? If I had to do about 15 second sequence of images all the performance (there are 50 of them) it would be a huge file size app? If so, what are my alternatives to be?

  Here is a screenshot just for reference... the image behind this content should be the "slides" - movement

  http://i.gyazo.com/d23c545bc42f339248a0ac8ca4ec9d5f.PNG

  Thanks a lot for any help in advance.

  You should try rendering a video instead, and see if it works best for the size of your file. By rendering a video you could listen to from a server instead of having to cook in the folio.

  Neil

• Ken Burns effect

  I would like to create a Ken Burns effect on a slide show in Muse, but it seems that Muse does not support this.  There are third-party applications that can create an economy of KNOWLEDGE in HTML5? Cheap is good, free is better!

  Thank you very much

  Pat

  Hi Salukitd

  Muse grid offers a widget of Ken Burns for Adobe Muse.

  http://www.musegrid.com/Adobe-Muse-widgets/Ken-Burns-Gallery

  See you soon,.

  Ben

• Automated Ken Burns effect?

  So I get this regular concert, make a slide show for an event, and it's pretty simple.  They give me hundreds of pictures, and I'm a Ken Burns-type slidesow with dissolves. I am an advanced user of AE, but I've always done this project in iPhoto, because it is almost entirely automated.  The problem, however, is that iPhoto live upward rendering format 720 x 480 square pixels and cultures most in rendering in preview images.

  So what I'm wondering is if anyone knows of a good plugin script to do this kind of thing in AE, so I must not cross and make keyframes for each image, worry the banks entering the frame, etc.

  Thank you!

  FX Factory of Noise industries would be an option and I think in Boris Continuum that there is also a semi-automated for this effect.

  Mylenium

• Movement of Image jerky with Ken Burns effect

  Hello, this is my first post on these forums, and like many, that's a question. I'm currently editing a slide show and I'm coming two main problems. 1. my images are moving across the screen in a jerky way (which means that when I export the video to watch I see each line of pixels changing as if I were looking at the picture between two pairs of glasses with the back set in motion) 2. When I Zoom in on the images in the video that they stay in the same quality they were then first display (under 'fit to screen') why is that when I zoom on these images, they become extremely blurred, the images are very large (over 3 k x 3 k)? Any help would be much appreciated!

  -Jones

  I think I solved the problem. What needed to be done was if you uncheck "fit to frame" image because when this option is selected the image is displayed in the image (either 1080 p or other) and when the image is enlarged it is displayed as if the deminsions were 1080 (so that damn looking more closely). In order to get a complete image quality the image cannot have 'fit to frame. Adobe really needs to fix this problem, it's a big problem.

  As for the jerkeyness, I think that turn off 'fit to frame' helped with that, but I turned on "interpolation" also when I export.

  Thank you for helping solve me this problem, everyone.

  -Jones