TALENT installation receiving invalid LINK TABLE on peopletools8.51HR
Hi allI currently install peopletools 8.51 and HRMS 9.1. When executing scripts for data mover, I have a very unusual error. When you import the table PS_INSTALLATION it gives me the following error: return: 904 - ORA-00904: "TALENT LINKS": invalid identifier, SQL has failed, sstmt: insert into PS_INSTALLATION... "
Any suggestion is welcome.
Thanks in advance.
Dennis
846989 wrote:
... I ran the scripts for PT first, and this error occurs during the installation of the application of human resources.
And this is your error is coming from. You should not install PT first then MFC application in the same database.
Do not create a database system peopletools then add application in there.
If you set the database in Data Mover, simply create the MFC (demo or sys) application that includes the PT as well.
Now what to do next? Drop and re-create the database would be probably the most reasonable get all rights.
Nicolas.
Tags: Oracle Applications
Similar Questions
-
Silverlight-during the installation receives an invalid message of (1) data for image corrupted and checksum (2). It is a Mac.
Anyway to install Silverlight on a Mac. Use with NetflixpprimmSilverlight forums: http://forums.silverlight.net/
-steve
-
In the latest Version of FireFox 9 Page Starup of Mozilla Firefox, pls which is the default home page no longer works, when you click it says invalid link, look at this and fix it...
Can be caused by a corrupt installation of Visual C++ (several versions can be installed-by-side; SxS) it lacks certain runtime components (Redistributable Package).
See:
- [908165/questions/908165] The URL is not valid and cannot be loaded
-
After reinstalling Windows on Linux invalid partition table
I got an operating system linux on my pc, then I tried to install windows along the side with linux, so I put my windows cd in the drive and follow the steps, the first steps were well made, but when the pc restarts, it is a message (invalid partition table). p.s. I formatted the c partition and it did not work, so I deleted and made a new partition in unallocated space and there do not have too much work, help?
Another PS it is no os can I enter on my pc.If you deleted all the partitions of the hard disk using Linux, then you should be able to put your Windows install disk, boot from it and install Windows. The installation procedure needs to configure your hard drive correctly for Windows.
-JW
-
Installer says "invalid serial number"... (CS6 Mac DesWebPrm)
Try to install CS6 (DesWebPrm) new Mac system, but the installer says "invalid serial number"... What should do?
(Originally, I bought the software "put in a box", but this is a downloaded installer)Clues? Thanks in advance.
/ m
Hello
Please see this link for more details: error of incorrect serial number
Hope this helps!
-
I can't install a previously purchased version of acrobat 9 pro downloaded from the site. Returns the message to the final installation steps "invalid serial number." I had copied and pasted directly from 'My Adobe'. What should do?
Hi hgratz,
In view of the error "invalid serial number" for Acrobat 9, I suggest you to please visit the doc KB link mentioned below:
Error "invalid serial number". Acrobat 9 | CS4
Let me know if this helps.
Kind regards
Ana Maria
-
specification of invalid column, table.column, or user.table.column
I'm doing a simple one-to-one mapping.
I'm trying to associate a key to my table in the source field with a key field in my target table.
Both are Oracle tables.
Mapping in source.
Target Key and Check the column not Null (Flow Control) have been checked.
Error message I receive:
1747: 42000: java.sql.SQLException: ORA-01747: invalid column, table.column, or user.table.column specification
java.sql.SQLException: ORA-01747: invalid column, table.column, or user.table.column specification
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
at com.sunopsis.sql.SnpsQuery.executeUpdate (SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders (SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt (SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i (e.java)
at com.sunopsis.dwg.cmd.g.y (g.java)
at com.sunopsis.dwg.cmd.e.run (e.java)
at java.lang.Thread.run (unknown Source)
The query ODI runs:
/ * DETECTION_STRATEGY = NOT_EXISTS * /.
Update MIG_PROF ATTRIB_MATRIX t.
Set)
) =
(
Select
of ODIWORK. I HAVE$ _ATTRIB_MATRIX S
where T.BAC = S.BAC
)
where (LAC)
en)
Select TRAY
of ODIWORK. I _ATTRIB_MATRIX $
where IND_UPDATE = 'U '.
)
Help, please.It simply means that you specified all the columns in your target as key columns data store.
If you see the request on the operator:/ * DETECTION_STRATEGY = NOT_EXISTS * /.
Update MIG_PROF ATTRIB_MATRIX t.
Set)
) =
(
Select
of ODIWORK. I HAVE$ _ATTRIB_MATRIX S
where T.BAC = S.BAC
)where (LAC)
en)
Select TRAY
of ODIWORK. I _ATTRIB_MATRIX $
where IND_UPDATE = 'U '.
)(value =)
There is no column within the brackets. To do at least a nonkey column in the mapping to use this KM for update.
Hope that helps -
Qosmio x 500 - 14W - invalid partition table
Hay guys,
I wanted to start my Toshiba Quosmio x 500 - 14W PQX33E (Product Code), but the only thing I found on my desk: invalid partition table.
In another Forum I found a threat, which means I have to restart my computer. So I tried a Reboot Cd, but found nothing. Then I tried to call the Call Center of Toshiba, but they are closed...
For me, is the Toshiba Service miserably and I hope that some guys from the Forum can help me.
Thank you
PaulHello
You must install the operating system once more.
Invalid partition table means that something is wrong with the HARD drive and the operating system cannot start.
So if you n t have a recovery disk, you must order one:
http://backupmedia.Toshiba.EU/landing.aspxPS: I made good experience with the Toshiba service comparing the service with another laptop from the manufacturer I have to say that s OK and I meet a lot of people who said that other manufacturers are not really better
Which; s my opinion -
invalid partition table is displayed on my screen, pl help out me...
Exactly what happened before you saw the error message?
-
My product key on a new installation was invalid so then I activated by phone... now when I use windows update it is not working properly because it says that I don't have a genuine copy of windows... But it seems that the updates don't come down... is it ok to work this way?
To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
Once saved, run the tool.
Click on the button continue, which will produce the report.
To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
Windows security updates will continue to come down the pipe under automatic updates, but you cannot access the General updates until the system to validate. -
WAP Error Message received invalid key EAPOL MIC (msg 2/4)
Hello
can someone help me with this error message received invalid key EAPOL MIC (msg 2/4).
Timestamp Gravity Service Description November 5, 2012 15:11:27 warn hostapd [4365] Received invalid key EAPOL MIC (msg 2/4) Only, I get this message of a device when connecting to the WIFI network.
This only happens from time to time. Sometimes it connects without any problems.
Appriciate any help.
Sincerely
Patrik
This is an error when the STA (the computer) built the package. 2/4 is to indicate the negotiation process where it sends a value for single use with his own microphone. A microphone is a verification of the integrity of the messages (or code).
Basically, this error is said, everything that this computer is sending is not valid. You can try to make the AP behave differently as force the use of side effects instead of TKIP + AES depending on which product you have. About removing 'mixed' wireless network. As example, try using WPA2 (AES) only.
These errors are more frequent with TKIP, since it is the nature of TKIP to send one key per package.
-Tom
Please evaluate the useful messages -
Oracle 11g Release 2
I run an UPDATE statement. In the 'set' I am trying to update a column by using a subquery on the right side. REPLACE the statement Gets the error ORA-01747: specification of invalid column, table.column, or user.table.column.
create table tab1 ( file_id number , record_id number , part_type_id number , part_number number , positon_id number , notes varchar2(255) , mapped varchar2(1) default 'N' ) / insert into tab1 values(1,1,123,777,1,'NEW|A/C COMPRESSOR KIT','N') ; insert into tab1 values(1,2,123,777,2,'REMAN|A/C LINE','N') ; insert into tab1 values(1,3,123,777,2,'TEST NOTE','N') ; commit; select * from tab1; /* FILE_ID RECORD_ID PART_TYPE_ID PART_NUMBER POSITON_ID NOTES MAPPED --------- ---------- ------------ ----------- ---------- ------------------------- ------ 1 1 123 777 1 NEW|A/C COMPRESSOR KIT N 1 2 123 777 2 REMAN|A/C LINE N 1 3 123 777 1 TEST NOTE N */ DECLARE v_note2 varchar2(255) := 'NEW' ; BEGIN UPDATE tab1 t SET , t.notes = (select REPLACE(t.notes,v_note2,null) from dual ) WHERE t.file_id = 1 -- value comes from another source AND t.part_type_id = 123 -- value comes from another source AND t.part_number = 777 -- value comes from another source AND t.position_id = 1 ; -- value comes from another source END ; / ERROR at line 3: ORA-01747: invalid user.table.column, table.column, or column specification
Here's what the end result should be:
FILE_ID RECORD_ID PART_TYPE_ID PART_NUMBER POSITON_ID NOTES MAPPED --------- ---------- ------------ ----------- ---------- ------------------------- ------ 1 1 123 777 1 |A/C COMPRESSOR KIT N 1 2 123 777 2 REMAN|A/C LINE N 1 3 123 777 1 TEST NOTE N
Hello
orclrunner wrote:
Oracle 11g Release 2
I run an UPDATE statement. In the 'set' I am trying to update a column by using a subquery on the right side. REPLACE the statement Gets the error ORA-01747: specification of invalid column, table.column, or user.table.column.
- create table tab1
- (file_id number,
- number of record_id,
- number of part_type_id
- number of PART_NUMBER,
- number of positon_id
- Notes VARCHAR2 (255),
- mapped by default varchar2 (1) ' don't
- )
- /
- insert into tab1 values (1,1,123,777,1,'NEW |) Kit COMPRESSOR / it, ' don't);
- insert into tab1 values (1,2,123,777,2,'REMAN |) A/C LINE ',' don't);
- insert into tab1 values (1,3,123,777,2, 'NOTE of TEST', ' don't);
- commit;
- Select * from tab1;
- /*
- FILE_ID RECORD_ID PART_TYPE_ID PART_NUMBER POSITON_ID MAPPED NOTES
- --------- ---------- ------------ ----------- ---------- ------------------------- ------
- 1 1 123 777 1 NEW | A/C COMPRESSOR KIT N
- 1 2 123 777 2 REMAN | A/C LINE N
- 1 3 123 777 1 TEST NOTES N
- */
- DECLARE
- VARCHAR2 (255) v_note2: = "NEW";
- BEGIN
- Tab1 t UPDATE
- SET
- t.notes = (select REPLACE(t.notes,v_note2,null)
- the double)
- WHERE t.file_id = 1 - value comes from another source
- AND t.part_type_id = 123 - value comes from another source
- AND t.part_number = 777 - value comes from another source
- AND t.position_id = 1; -value comes from another source
- END;
- /
- ERROR at line 3:
- ORA-01747: invalid column, table.column, or user.table.column specification
Here's what the end result should be:
- FILE_ID RECORD_ID PART_TYPE_ID PART_NUMBER POSITON_ID MAPPED NOTES
- --------- ---------- ------------ ----------- ---------- ------------------------- ------
- 1 1 123 777 1 | A/C COMPRESSOR KIT N
- 1 2 123 777 2 REMAN | A/C LINE N
- 1 3 123 777 1 TEST NOTES N
The comma after SET is a syntax error.
Why you use double? Why not just
UPDATE tab1
SET of notes = REPLACE (notes, v_note2)
WHERE file_id = 1
...
?
-
ODI-1227: SrcSet0 (load) task fails on the source of ORACLE STAGING_YYY connection.
Caused by: java.sql.SQLSyntaxErrorException: ORA-01747: invalid column, table.column, or user.table.column specification
We get the above error whenever we run an ODI interface,
This interface is straight forrwad a mapping update incremental IKM Oracle, although we have identified the problem but do not know how it could be fixedSource table that contains two columns that are generally identified as the key of DB
NAME
/ / DESC
the target too has the same columns. If we disable these mappings to columns from the Active maps the interface works very well, however, with the latter, it fails. We will not be able to change the name of the column in the target because it is a table of Oracle products and has several dependencies to the breast.
Please suggest an alternative and also if our understanding is correct.
Thanks in advance.
Jay
HI Jay
change the column as DESC and put "DESC" in the name, and save it for all the source concerned target and remapping to remove the column from the interface
Thank you
P
-
ODI error. When you try to import.
Error Type 2 SCD: ODI - 1228:ORA - 01747: invalid column, table.column, or user.table.column specification
It is a common question.
Allow your SCD SCD table column properties if you do not select "crush on change."
This property simply-Online CPC IKM goto => select ignore option error on update of existing lines.
-
currently still have PP CS5.5 & want to install on another office, understand that I can only use one at a time. don't have a CD, can I get information from the current installation and a link to download PP CS5.5?
Download & install instructions https://forums.adobe.com/thread/2003339 can help
-includes a link to access a page to download the Adobe programs if you do not have a disk or drive
Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.
Maybe you are looking for
-
HP Pavilion G7 - 2233cl Faliure ID 0TXVBH-6BB74J-MFPX1A-60RL03
Hello I have a laptop HP Pavilion G7 - 2233cl. For the last 4 days, my laptop was not working properly. It boots into the operating system (although it is a bit slower than usual) and I am able to connect. After that I connected, I can't connect with
-
I'm about to reinstall Windows XP from my old CD and once this is done, I'd like to update to SP3, which if I understand correctly, I can move on without SP2 SP3, because my old cd called for SP1a. Good on this I am one? I would like to know before s
-
My recycle bin icon disappeared from my office. How can I get that back?
-
How can I do to change the e-mail (for example, from Outlook to webmail)
Anyone could change the Outlook to a Webmail email when sending attachments to someone?
-
Hey peops,.I've just been hijacked here after not being not able to get any help from support, so don't know if there is already an answer there. I'm currently frames made in the background, so I don't want to reboot or anything to that effect. I'm o