the Api client DLL crashing only in release mode

Similar Questions

• Only in the last days, Windows will ONLY open in Mode without failure. I don't know why?

  Only in the last days, Windows will ONLY open in Mode without failure. (I have made some changes myself)

  I tried everything I knew how to do, without success.

  It must be clarified...

  Which of the following statements apply to your problem:

  1 when you started the computer you tried to log in normal mode, it wouldn't, and you needed to go to safemode manually in order to identify you.
  If so, was there an error message?

  2. When you start the computer, it went automatically in safe mode.
  If so, try this...

  Login in safe mode > start button > in the search box, type msconfig > Enter > at the top, click on start > make sure that there is NO check mark in front of Safe Boot > make sure that there is NO check mark anywhere in this window > click OK when finished.

• How can I reinstall Windows NT BASE API Client DLL?

  Here are 2 mistakes.

  Install_flash_player_32bit.exe - Entry Point not found

  The procedure entry point DecodePointer be found in KERNEL32.dll dynamic link library.

  Windows Script Host

  ERROR: Failed to enumerate virtual directories!

  Hello

  1. which version of the Service Pack is installed on the computer?

  For the problem with Windows Script Host, you can download Windows Script 5.7 for Windows XP and the problem.

  Reference:

  Windows Script 5.7 for Windows XP

  http://www.Microsoft.com/download/en/details.aspx?ID=8247

  See also:

  Overview of Windows Script Host

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wsh_overview.mspx?mfr=true

  For the problem with the Flash Player, you can try to download the latest version of flash player from the link provided below.

  Adobe Flash Player 11.1.102.62 (3.62 MB)

  http://get.Adobe.com/flashplayer/

  See also:

  Installation problems | Flash Player |

  http://kb2.Adobe.com/CPS/191/tn_19166.html

• What is the scope of the user when created with the API?

  I noticed that users created with the Adobe Connect API for my account/meeting are always listed in the Administration-> area users and groups.  Which probably means that the login of the user is valid for my meetings.  So if they wanted to register or attend a meeting controlled by someone else, they would have to re - register or be re-created by this administration.  Is this correct?

  I'm trying to confirm what I know how to enroll a user on my site.  It would be ideal that my site would record the user and also to connect the user without the user to enter a separate password (my site would be to generate and store the password).  If the API creates a user only for my meetings so this isn't a problem.  The user must always just go on my site go to the meeting.  However, if the user created by my account Adobe API can be used to access / register for meetings of others on Adobe then this approach is not so good because the user would need to know their password.

  If this is your account login, then you or the person with the account, would be the only ones who could change their password. And for the user to do so, they must connect Connect Central and then my profile and then change their PW. Alternatively, they could use the forgot my password link on any page that requires to log on. So, if you pass authentication for them to join the room, they have, in theory will never see a screen connection or central connection. Are there other administrators to your account that would change passwords of users?

• Embedded Python import questions (numpy, scipy, h5py) in release mode

  Background:

  I'm working on a scientific application that uses numpy/scipy (Python modules) in the backend for the calculation and h5py for data collection.  My application consists of a layer of UI in QML/C++ calling an embedded digital computations Python interpreter.

  I have compiled successfully cross - the following libraries:

  BLAS, LAPACK, HDF5, Python3.2, numpy, scipy and h5py

  The application under app/native directory structure is as follows:

  + assets

  + qm

  + usr

  + include

  + lib

  + pkgconfig

  + python3.2<- numpy/scipy/h5py="" exists="" within="" the="">

  libblas.so

  libgfortran.so.3

  libhdf5_hl.so.8

  libhdf5.so.8

  liblapack.so

  libpython3.2m.so

  libpython3.2m.so.1.0

  libpython3.so

  So far, I am able to run my application in debug mode and was able to import various Python modules (including plug-ins) without any problem.

  Problem:

  As I approach of realization, I started testing in release mode and noticed the following:

  (1) loading external libraries that are formatted in the works of the file bar (ie: I'm able to call BLAS/LAPACK Fortran libraries HDF5 routines).

  (2) run the Python interpreter works integrated (in the main thread or in a separate thread)

  So, I am able to confirm that the external libraries and the Python interpreter running in release mode, as well.

  Problems occur when I tried importing Python modules:

  (3) import builtin Python modules/packages works without problem

  (4) import of modules/packages with relative path fails.  Example, if I run the command:

  Import numpy

  This works in debug mode but not in release mode.  After further review, it seems that when importing packages, any import with relative path statement will fail.  In release mode, the example above does not have:

  Of. import scimath as emath

  However, the following statement works:

  from .scimath import *.

  I have two questions:

  (1) no assumption whether it is a problem of Python, is a matter of output mode?  I'm leaning toward release mode because the same application runs in debug mode.  I also looked at the python source code and could not see nothing esoteric files IO operations.

  2) based on the observation, it seems that relative paths are handled differently between the Debug and Release modes.  Could someone tell me please to some documentation explaining the differences?  And if there is no such thing as these documents, may provide a brief summary?

  Thank you

  Josh

  Ok.  I think just, I solved my problem.  I will list the observations of first and then another solution that could be useful to someone in a similar situation.

  Bottom Line Solution (if you don't want to read more):

  Apparently, I have compiled my LAPACK library with extended precision of point floating (128 bits) that are not supported on the Cortex A9.  I recompiled LAPACK with double precision.  Running and the import of the application in release mode now works.

  Interesting observations:

  At first, I thought that the dynamic library release mode handles loading differently than the debug mode, because during development, I never came across questions.  As a result, I decided to directly link all libraries that numpy using in my application (even if the application does not use them).  Compile and link all are perfect, but of course, during execution, the numpy failed to load module.

  So I decided to run it in debug as a validation test mode.  Surprisingly, the application will fail at the binding stage!  It gives symbols not try to call the extended precision of the XBLAS library routines (which, as mentioned previously, does not work on the Cortex A9).  At this point, I'm completely flabbergasted that I've been running the application using LAPACK in debug mode without ever seeing this message for almost a year.

  I wondered how is this possible?  I also use the linear algebra of scipy module, calling LAPACK/BLAS routines without problems during development.  In debug mode, I never see this failed or any message indicating that there are unresolved symbols in my the LAPACK library.  In addition, I cross check all calculations against MATLAB/Octave and they are correct.

  Conclusions:

  Here are my conclusions, and if a BlackBerry person can confirm, I'll be very grateful:

  (1) in the mode of publication, the dynamic linker will check each symbol in a shared runtime library.  If no symbol is not resolved regardless of whether your application is used or not, the library of loading will fail.  This does not work in debug mode.

  2) there is a potential bug (not sure) in the linker which also behaves differently between the debug mode and release mode.  In debug mode, the linker cannot link a shared library if no symbol cannot be resolved despite the executable not referencing them.  In release mode, the linker will not FAIL.

  If the two above are met, then I would make a suggestion to change behaviors such as build step and run step behaviors are aligned between them.  Please let me know if it's intentional or if I should file a bug report.

  Thank you
  Josh

  PS: Btw, I also built a Fortran cross compiler in case you're wondering how I managed to compile the BLAS and LAPACK for BlackBerry.

• Get 'Access denied' vCloud API client after the time-out period

  The .NET tool we build against the API for vCloud strike sometimes a timeout, which will essentially all subsequent calls (at least for the namespaces for example VAPP, Vdc and VM) fails with an access denied message. There is no doubt that this is because a timeout, because that happens only after a certain amount of inactivity.

  Now, I want to try and detect this "timeout" somehow and act accordingly, for example automatically trigger a disconnection and the client connection (instead of making mistakes). The other option is to have a thread keep alive session by calling some resources very, but really, I don't like the idea of ever having any connected clients.

  Any thoughts on how I can detect that the time-out has hit? I can't count on the fact that "Access denied" mean timeout...

  Thank you!

  / Stefan

  infinitesorrow wrote:

  It's a good suggestion, only that I do not directly use the services REST, but the VcloudSDK and the vCloudRestSchema DLL to in .NET... What would be the equivalent of/api/sessions?

  I'm not sure.

  I'm not a .NET programmer (and don't see anything useful in the .NET SDK documentation), but I don't know that the Java development kit has a RestUtil class with a method 'get' that runs on a URL specified by the arbitrary appellant that could be called "/ api / sessions" to do something in this direction in Java. The .NET development kit may have a similar utility class with such a method?

• Error at startup of Windows 'msseces.exe - bad image. the application or dll program files\ microsoft security client\ sqmapi.dll c:\ is not a valid windows image... »

  MSSECES. EXE

  My mini HP netbook 110-1000 has now two screens same when I start, I am running windows xp. When I boot I get a box that says msseces.exe - bad image, it says inside the box of the application or dll program files\ microsoft security client\ sqmapi.dll c:\ is not a valid windows image. Please check this against your installation diskette. the netbook came with a floppy disk. programs are in the partitioned hard disk. the other thing, I noticed that it's my icon for security essentials is missing and I can't uninstall security essentials because it crashes when I try to uninstall, and then he asks me if I want to report to microsoft. e help thank you Gary.

  Hi Gary,.

  It seems that Microsoft Security Essentials has corrupted on your computer. You can uninstall and reinstall the program to check the issue.

  Step 1: Since you are facing problems of removal of the program, you can check the following thread and check if it helps.

  Uninstallation of MSE - Microsoft Answers

  Step 2: To reinstall, refer to the following.

  Virus, spyware & Malware Protection | Microsoft Security Essentials

  See also:

  Checklist for installation of Microsoft Security Essentials - Microsoft Answers

• DLL from the Windows API (user32.dll) causes a fatal error

  Hello
  On installation, we using a touch screen. LabView software is running in full-screen. I need to deactivage my Panel before if the screen saver is to warn the user start anyting. I use user32.dll SystemParametersInfoA and it works well, except, if I left the software. "myexe a fin a mistake and should be closed" (something like that my XP is in french).

  I have no issues in debug mode, this error happens in exe mode.

  I use LV 8.6.1. Do you have any idea why?

  Thank you

  CFiset wrote:

  Thanks, I'll take care of the details. But unfortunly, it does not.

  uint32_t SystemParametersInfoA (uint32_t SPI, uint32_t 0, uint32_t * value, False uint32_t);

  SPI = 114 = SPI_GETSCREENSAVERRUNNING

  If * value! = 0, screen saver, ON the other scresaver OFF

  Still have the fatal error of Windows.

  Thank you

  I noticed the node having a rather odd way of user32.dll on the initial load of the library call. You happen to have copied this DLL somewhere and SEO with full path to your VI?

  It is a very big NO-NO! User32.dll and several other Windows system dll weird for the system and are all bad behavioured if you try to load another copy elsewhere on the disk as the system directory. Just rename the user32.dll library only and let Windows choose the good DLL from the system directory.

  Another problem with specifying the full path to a copy of such a DLL, it of that LabVIEW you will think that you must have this built application-specific DLL and will include it in the build. However your user32.dll is almost 200% VERY incompatible to any other Windows system there, because of the Windows Service Pack version and upgrades of the correction of a bug, as well as different versions of Windows.

  Rolf Kalbermatter

• Sims House Party, the installation program starts, then immediately closes, gives me the error "0 x 80040707 - call function DLL crashed: SORTS." PathGetSpecialFolder.

  original title: error number: 0 x 80040707
  When I try to install the Sims House Party, the installer launches and then immediately closes, gives me the error "0 x 80040707 - call function DLL crashed: SORTS." PathGetSpecialFolder.

  According to the compatility of Windows 7, the House Party is compatible under 64-bit and 32-bit Windows 7. I tried to install it on another computer running Windows 7 32 bit and the error does not occur.

  I am running Windows 7 Professional 64 bit.

  Looks like that method 1 solved my problem.  Normally, I would get this message several times a day.  For more than 3 hours I applied the method 1, and the error has not appeared again.  Thank you very much.

• The code works in debug mode but crashes when compiling in release mode

  I am facing the following problem. I have code that works well when it is run in debug mode. However, when I compile it in release mode and run the executable file, code freezes and does not work. The code acquires images from a camera of Hamamatsu. In debug mode, I'm able to acquire images permanently. However, in the release version, the code crashes after the acquisition of the first image.

  I use version 7 of LabWindows/CVI.

  I would be very happy if I can get any help/suggestions for this problem?

  Thank you!

  Kind regards

  Kaddour

  Neji:

  If you search this forum for "version crash debug" or "release version crash" or other similar expressions, you will find that it is a fairly common question.  Look through the other posts that you find here to see if something applies to you.

  The debug version does a few things like padding variable, then you can sometimes invaded your space variable declared without crushing the next variable.  In the statement, the variables are packed, so if you invaded one, you replace another.  Just a possible difference.

  You can do some things in your exit code to see where things get lost, as (temporarily using printf after several instructions at beginning and end of your loop to try to identify this failure of line of code.)

  Look through other threads for other ideas.

• The procedure entry point ucrtbase.terminate could not be found in the api-ms-win-crt-runtime-l1-1-0.dll dynamic link library

  Running Windows 7 Home premium

  Hi I get this error when I try to add or remove windows features. Before I even tried to change anything, I get this error when I try to access point to add or remove windows features. I just reinstall windows then perhaps it's to do with it?

  ERROR

  The procedure entry point ucrtbase.terminate could not be found in the api-ms-win-crt-runtime-l1-1-0.dll dynamic link library

  If anyone knows what this means or what I have to do to get rid of the error, any help would be accepted with gratitude.

  Best regards Steve

  Hi, I have now discovered what the problem was. It wasn't Office exactly. Rather have just reinstalled windows 7, windows update did not work properly. Virtually no updates had been installed. I had to run the "windows update diagnostic" program from Microsoft support. Once that had solved the problem of update on 180 updates have been installed. Once they have been installed the problem with the error has been resolved. I do not know what update fixed but one of them did.

  Best regards Steve

• Set the signature using the API field only

  I have a situation where all PDFs you signed are created for each customer individually and on the fly.

  I must be able to define the scope of the signature using the API only.

  Is this possible? I can't change the pdf file and add any kind of labels. It must be done using an x, the value of the coordinate y.

  Hello Lawrence,.

  If you are looking to set the fields of the form through the API, you can see below reference material:

  https://secure.NA1.echosign.com/public/docs/EchoSignDocumentService21#FormField

  Kind regards

  -Usman

• Update the name of the client using the api HZ_PARTY_V2PUB.update_organization

  Hi all
  
  I'm trying to update the following fields (OrganizationName, known_as, organization_name_phonetic) for the client (hz_parties) and using the script below update records with the success in the hz_parties table, but I am unable to view the new customer to the customer's screen.
  
  I use the Version 12.1.3.
  
  Here's the script:
  
  
  DECLARE
  l_organization_rec HZ_PARTY_V2PUB.ORGANIZATION_REC_TYPE;
  l_party_rec HZ_PARTY_V2PUB. PARTY_REC_TYPE;
  l_profile_id NUMBER;
  l_return_status VARCHAR2 (10);
  l_msg_count NUMBER;
  l_msg_data VARCHAR2 (2400);
  l_party_obj_version NUMBER: = 2;
  BEGIN
  l_party_rec.party_id: = 363173;
  l_organization_rec.organization_name: = 'xxxxxxxtestchange ';
  l_organization_rec.known_as: = 'xxxxxxtest price changes. "
  l_organization_rec.organization_name_phonetic: = "course change xxxxxx";
  l_organization_rec.party_rec: = l_party_rec;
  HZ_PARTY_V2PUB.update_organization (p_init_msg_list = > FND_API.) G_FALSE,
  p_organization_rec = > l_organization_rec,
  p_party_object_version_number = > l_party_obj_version,
  x_profile_id = > l_profile_id,
  x_return_status = > l_return_status,
  x_msg_count = > l_msg_count,
  x_msg_data = > l_msg_data);
  
  Dbms_output.put_line ('Status of the api call' | l_return_status);
  
  COMMIT;
  EXCEPTION
  WHILE OTHERS THEN
  DBMS_OUTPUT. Put_line (' error :::'||) SQLERRM);
  ROLLBACK;
  END;
  
  My problem is that I am able to view the records updated to back-end, but unable to display front end.
  
  Thanks and greetings
  El M

  "DQM series Sync Index program" run it after that you have made the updates. If not try manually submit this work and see if you can view your changes

• PCoIP zero client does not display an Horizon view Client user of the window for one (and only one)

  The zero client is a Samsung NC241 via Teradici Tera 2. My user has 3 virtual workstations assigned;  Current SOE with WinXP, a specific COMPUTER WinXP and a test for the upcoming Win7. When I connect the customer to see I'm automatically redirected to the WinXP for HER, without going through the window that lists usually all available virtual PC. This happens on all terminals, I tried. Other users, even if you connect to the same terminal, are given the option to select a virtual PC, even if they have the choice of a!

  I have checked the setting for the PC virtual in the Teradici PCoIP Management Console and also the settings of the user under the Horizon view VMware administrator but cannot find where my configurations user and desktop are different from those that work "correctly".

  Is someone able to propose what I'm looking for?

  TIA

  Thanks, Stu, for your input.

  I arrived on the solution after you follow through with your suggestion above. I used the client on a Windows PC, then after that record on I clicked on 'Options' in the bar of VMwareView Client session and erased the text is 'auto connect to this office. We have the option 'Enable automatic reconnection' set to false, so I'm not sure why that followed me.

  But the good news is that it worked!

• How to assign the client to the user via the API of the IOM

  Hi all
  
  Can someone tell me which method I should use to assign a customer to the user using the API of the IOM...
  
  Thanks in advance

  I think the problem culd be with the wrong import statement.

  You must add the import statement below to assign roles admin sectarian

  Import oracle.iam.platformservice.api.AdminRoleService;

  HTH