The chapter still Points

Similar Questions

• How to import Final Cut Pro video in still and still get the chapter markers?

  I want to burn a DVD of a Final Cut Pro video.  How can I import in again and still get the chapter markers?

  I imported as a timeline, but the chapter markers do not show

  You also try and put a candle Chevy in a Ford engine?

  As far as I know, there is no interoperability between still (and program from Adobe) and FCP (Apple program)

• Move the chapter markers still

  Hola amigos!, Aqui con una super duda: I have mi sequence terminada y hasta con is reminder tribes, pero ahora tengo necesidad of mover toda the sequence a poco has derecha para poder insertar otros clips, how the hago para as the sequence is mueva junto con los capítulos tipo still is?

  
  Seria - River think that none is you can only tendría than cada uno por uno chapter marcador mover!

  Hello friends!, here with a great question: I got my finished and same sequence markers identified, but now I need to move the entire sequence a little to the right to insert other clips, how to make him the sequence still moving as well as the chapter markers?

  -It would be ridiculous to think that you can not and will have to move each chapter marker a! -

  -It would be ridiculous to think that you can not and would have to move the marker to each chapter one! -

  The answer is ridiculous (as in, Yes, it's ridiculous).

  I think several people have asked this as an item to add.

  feature request

  My solution, which is a little better than any other manual method, is to Ctrl-Arrow for each marker still / sequence, select an item and adds an element brand. Adjust the sequence according to your needs, then do the reverse. Most of my chapters occur at the beginning of a clip, is not as bad as it sounds.

  But a ripple setting for brands of sequence/yet? A very good idea.

• Can automatic repositioning of the chapter markers still after removal of ripple?

  I need to break up a sequence of 4 hours in two short to 2 dvds. However, I already scored all the chapters. Duplicate this long sequence and ripple delete the first half to make the 2nd sequence to dvd. However, the chapter marks still has not moved the removal of ripple. Is it possible to attach these markers at certain place of video clips, so I can't move them when I change the length of the sequence?

  using the first and yet cs4

  Chapter markers are related to the timeline and not not the Clips on the Timeline.

  If they have been applied, and Clips are then modified, you manually reposition.

  Sorry,

  Hunt

  PS - Clip markers would be linked to the Clips, but they do not act as chapter markers. Many have filed a feature request to have chapter markers have a toggle button to fix either them the timeline or Clips.

• After separate or unscrew the last block of text, it still points to the old story

  Hello

  I used "kTextUnlinkCmdBoss" to separate the last block of text on the wire, however, once the order is processed, if I have access to the textModel of the box following it still points to the old model:

  InterfacePtr<IGeometry> srcgeometry (srcbox,UseDefaultIID());

  If(srcgeometry ==NULL) break;

  InterfacePtr<IMultiColumnTextFrame> srctextframe(srcbox. ) GetDataBase (), Utils<IFrameUtils>-> ()GetTextFrameUID(srcgeometry), UseDefaultIID());

  If(srctextframe ==NULL) break;

  Srctextmodel InterfacePtr<ITextModel> (srctextframe->QueryTextModel());

  If(srctextmodel ==NULL) break;

  Is it possible to force a refresh the news of textModel in relation to the text block? Of course, if I checked the textModel later, he is properly affected by a new, it's just problem of info is not refreshed on the same running cycle.
  Thank you
  ADI

  Hi Adam, Hi Dirk,

  what works for me using kTextLinkCmdBoss on the precceeding box.

  InterfacePtr iTextLinkCmd (CmdUtils::CreateCommand (kTextLinkCmdBoss));

  UIDList uidList (iDataBase);

  uidList.Append (mcTextFrameUID_preceeding);

  uidList.Append (mcTextFrameUID_preceeding);

  iTextLinkCmd-> SetItemList (uidList);

  CmdUtils::ProcessCommand (textLinkCmd);

  Best,

  Peter

• Planning of the migrated to dev app still points to prod shared services.

  I have a 11.1.1 planning app to the dev who has been updated from prod by creating the app dev, restoring production Plannning app sql databases dev server, copy the prod dev essbase outline.
  
  My main concern is that the app always seems to point to prod SSP when you look in the advanced settings, under Shared Services settings. I tried to change the shared path to dev services. When I try to save changes I get ' year error occurred while processing this page.» Check the log for details". I don't know where is this newspaper. I see the path that points to prod in the table HSP_SYSTEMCFG under EIE_SERVER.
  
  I'm a little nervous to play with this because the last time that I trashed production shared services.
  
  Any advice would be greatly appreciated.
  
  Dave

  You can go in the relational table and update to the correct address of shared services, you will need probably need to restart the schedule service so that when you view it in the web planning it shows the correct url.
  It takes nothing to worry in this regard does not mean that your application is registered for bad shared services.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Bouba Analyzer: How to control the number of points per decade?

  Total newbie here. I can't control the number of points per decade in the Bode VI. It's always 5 points per decade.

  Don't know even how to get the Version of Elvis #, but it is at a minimum 4.1, because Elvis installer will install 4.1 (said the current version is most recent). Running Windows XP.

  How can I get Elvis to respond to my request for more points per decade?

  Mike

  Hi Mike,.

  If you are still curious about what drivers you have installed, you can view by using the Measurement & Automation Explorer (start"all programs" National Instruments"Measurement & Automation Explorer).  "Once their, go to my system" software and you'll find NI ELVISmx and its version.

  This behavior you're seeing is a known, class problem under Corrective Action Request (CAR) #373017.  For now, the number of points per decade will remain at 5.  Please wait for the next update of NOR-ELVISmx to see if this problem is fixed.

  See you soon,.

• the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

  What is apsGetReady?     Do I need?   If yes how can I do?  If this is not the case, how can I remove the window error message.

  """""""""""""""""""""""""""""""""""""""""""'''

  Wzcsldr2.exe found entry point

  the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

  """"""""""""""""""""""""""""""""""""""""""""""""

  Hello

  1. When you receive this error message?
  2. you did it before the issue of any material changes or software?
  3. what service pack and antivirus are installed on your system?
  4. What is the brand and model of the router you are using to connect to the Internet/network

  5 are you facing problems to connect to the Internet or to the network?

  6. are you using any third-party wireless / network in the System Manager software?

  Method 1:
  

  Step 1: Boot your system in 'Safe Mode with networking' and check if you get the same error message. Then review the article mentioned below to do so:
  A description of the start in Windows XP Mode options:
  http://support.Microsoft.com/kb/315222

  Step 2: If you receive any error in safe mode, please boot your system to the boot and see if the problem still occurs in this mode. Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Method 2: Please see Using D-Link, if you use D link router.
  http://www.Dlink.com/support/default.aspx

• The system restore points, how can be stored/kept?

  I had problems restore XP on the computer of a friend.  I can't after installing SP3, a question that will be asked in a separate post.

  In an effort to not having to do a full system recovery on the computer in question, with this latest attempt to recover the operating system and install all updates, I started the creation of restore points for the system after each step, I took to get things running and upward.

  And that is, after installing SP3, with installation fails and then going back until the restoration of the system to an earlier configuration, I found none of the points longer existed the system restore.   :-(

  Is there a maximum number of restore points in the system that can be stored in XP and later Windows operating systems?

  Hey, Jose,

  I'm sorry for the late reply to your post, but I removed the weekend baby a bad back that makes me mad.

  I'll try to put your comments in quotes, with my response immediately after, flea.

  The hard drive is 160 GB.  The car had 2 partitions, the recovery partition.  Before reinstalling everything from scratch, I've used Easeus Partition Manager Home Edition to create a 3rd partition to move the original data of C:\ drive to your new partition so my friend can sort files and keep it as he and his family want and discard the rest.  I just copy everything that I can, because I don't know who, what, and where they have stored files.  I actually found a file stored in the recovery partition, but I moved it.

  "Here are some reasons that XP will remove RPs.

  'http://support.microsoft.com/kb/301224 '.

  • Read the KB article.  To make sure that we are on the same page, I get "system drive" means C:\.
  • Lack of free space should not be a problem.  C:\ is 32 GB, 10.1 GB used.  D:\ is 111 GB, GB used 21.2.  E:\ is 5.98 GB, used 5.00.  E: is the recovery Partition.
  • No disk compression
  • Did not display the warnings system restore.
  • I do not turn off System Restore fo any player.
  • This isn't an upgrade of the system to an earlier version, I just turn on the computer the way it came, new out of the box.
  • The system was always restored from the recovery Partition.  I have a set of restore CD, but they have been written about the recorded side with a felt marker.  I have not tried cleaning off the coast, this will be my absolute last resort.   :-)
  • Disk cleanup does not give me tabs and options as mentioned in the article.  I guess that these show upward when you upgrade from a previous version of the operating system.
  • I don't think I'm under low disk space.    :-)
  • Does not not after the age of 90 days, nor have I have reduced the size of the data store.  I didn't know either of these possibilities before you read this KB.  See how the KB has been written, I suppose that these two parameters can be changed.  Can you point me in the right direction for how to do this?  I have a computer multiboot (XP Pro and Vista Ultimate Edition) and I would change the date of age never delete a restore point, because the computer is rarely used nowadays.

  "I don't know that when you install SP3 and it goes well, a single method to uninstall SP3 is to restore the system to the time before SP3 was installed:

  http://support.Microsoft.com/kb/950249

  This would mean that you would still RPs after that installation of SP3 (if things were favorably) and that was my observation. »

  • When I started to have problems, I simply started from scratch with a Destructive Restore process.  When I'm really frustrated after several failures, I started looking for a quicker way to get back to a point just before I installed SP3 and found this KB.  After that, it was the safe boot mode and using the Control Panel Add/Remove programs to remove the SP3.  And I got very, very familiar with the process!   Laughing out loud

  "Other things I can think can remove all restore Points are third party maintenance and system cleaning tools, poorly designed or introducing a third part malfunction anti malware tools, etc..".  Malicious software can disable the system restore (temporarily of course), but I never saw remove Restore Points.  The XP disk cleanup will also delete all but the most recent restore Point. »

  • Other Easeus Partition Manager, I never got far enough along to try any other third party software.  My "modus operandi" is updated completely OS and Internet Explorer before I install any other software and update it.  However, with the idea of the recovery Partition, do not not the software isn't an option.

  "If they are all absent, it always seems that a human element involved somewhere."

  • I learned long ago, the days of 8-bit, unless there is a real hardware failure, almost all computer problems can be tracked to a human being.
  • Not all system restore points were missing, just the first I created which is involved by creating a restore point after you change the system, such as the removal of my friend doesn't use software.  For example the software to connect to an ISP with a modem.  They got the DSL.   :-)
  • All deletions of software would help speed up the computer for his own use.  The rest of the family is like me today, Mac users.   :-)

  "To answer your question:

  The settings default for the accumulation of Restore Points is 12% of the size of the monitored hard drive or 90 days (both values are adjustable of course).  Microsoft seems to draw attention to the way in which the Restore Points "live."   "Then, the oldest Restore Points will start to get deleted to make room for new Restore Points (see also KB950249).

  • 12%, eh?  Is it possible, in fact, I have exceeded this number by 12% by creating too many restore points?  Knowing what I was doing, which seems to be a possiblity says, as restoring all points were never deleted, only the earlier.

  I'll certainly post the info you suggested in the post on the SP3 forum.

  "Do or do not. There is no test. »

  • "Luke, the force is with you." :-)

• I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  Hello

  You will need to reverse the clean boot, as it is either incidental compared to
  the real cause of the problem. What, where you try to fix initially using the cleanboot?

  You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
  The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
  Right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions. You
  will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - enter a bracket )
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Start Windows 7 error"the procedure entry point not found objc_exception_try_enter in the dynamic link library objc.dll"

  The procedure entry point objc_exception_try_enter could not be located in the dynamic link library objc.dll

  How can I avoid that this message that appears on my desktop when I connect to my desktop computer?

  I deleted iCloud and other programs, but it still appears.

  You can try the clean boot procedure to try to ascertain what autorun program is triggering this msg

  http://support.Microsoft.com/kb/929135

• Running the background (sms listening thread) connected to the GUI (another point of entry) application thread

  Hi, I'm new to the development of Blackberry, I read everything on the application running at startup and have a different point of entry for this application. I still need help with my application

  I use BB JDE 4.7

  Simulator: BB 9530 4.7.0

  I'm developing an application of SMS. (extends UiApplication)

  1) there is a thread that listens for incoming messages

  2) there is a wire which is a SMS sender

  3) there is a main screen and two full screens. for example, when the user clicks a button in one of the screens full... I send you a message

  (4) when a message is received, based on the content of the message I push either a full screen

  (5) I have, all the wires and screens as the class internal to the main class that extends from the UiApplication.

  I got the basic features. I need help making that demand the application of autostartup

  (1) I need to start listening to the sms thread when the BB phone starts

  (2) I need to have the application icon in the applications screen as another entry point for the application (only for the GUI), and the listening thread must remain active in the background.

  (3) when an incoming message is detected, the application GUI should be brought to the foreground (if it isn't already forground) after posting a popup (instead of bring the application to the foreground, is it better to display a flashing icon in the status bar of the home screen blackberry and perhaps global popup)

  (4) when the GUI of the application part is closed, I need to stop the sms sending thread, and when the system shuts down, I need to stop the listening thread.

  Please help me guys... I have read many articles and discussions regarding the automatic start-up of applications, another point of entry, the # of background threads...

  but I couldn't find how to implement my needs.

  (1) should I need to create two different projects (applications [GUI thread, a sender] and one for the listening thread)? or I can achieve in single application?

  (2) should I have to sign in the background thread to the GUI app? If so, how?

  (3) it is necessary to use the RunTimeStore object? If so, I don't know how I can bring to the foreground the application GUI of the background thread.

  (4) if I have to stop the thread of listening by overiding onExit() method, the important question I have is, if the onExit() method is only for applications that extends from the Application class and not for the UiApplication class?

  (5) if I should have two projects (one main and the other as a spare point entry), which project should I do as "autorun at startup" and a "system module".

  As I need to have the background still running thread when the GUI application is active. I don't know how I do.

  Hello world...

  I reached my needs thanks to a single application. I used an other entry point.

  To refer to chk my other post

  http://supportforums.BlackBerry.com/T5/Java-development/how-to-avoid-creating-two-instances-of-the-a...

• My computer will not sleep, the display shuts off for a while but the fan still works and the keyboard lights stay on, and then eventually he dies just

  Imen quite so much as the title, when I try to put my computer to sleep the screen turns off but the computer is still running. My computer is a HP pavilion dv6 is a little more than 3 years. He used to do whenever a while, but now it's every time I try to pause. I'll close the top cover, but the fan still works, the hp on the lid logo light remains lit, and if I reopen it cover the power light is always on and the lights on the keyboard caps lock and wireless keys. The same actions occur when I try to put it to sleep manually (from the start menu). It does not at all I have to do another that now hold power, but even when I do nothing, it will stay here like this for awhile and then just turn off completely.

  When it starts up, it gives me the options to start in safe mode or start normally, and when I am connected and it gives me the "windows has recovered from an unexpected shutdown", I see that there is a minidump file in windows that has something to do with it. I tried to search for the file and the problem together, and then each separately, but nothing I've seen described really my problem, so I thought I should just ask on my problem.

  I read what made other people, changing advanced power settings, changing the media settings, etc. and did those things, but to no avail. It's not a huge deal, because I can just turn off my computer whenever I'm done with it for now, but I don't know if it's a bad omen for the future of my poor computer. So if someone could give me a hand with this point in mind, I'd be very happy. Let me know if provide more details (OS, processor, my favorite color, social security number, etc.) that would make it easier to solve. Thank you
  Also, either by the way, if this is in the wrong forum topic, please let me know.

  If you use a wireless keyboard or mouse to your computer, these items can keep your computer enter standby mode automatically because they constantly send a signal to the system, thus preventing downtime. An optical mouse (that changes color) causing a similar problem.

  • 1

    Click "Start," "Control Panel", "'material and his ' and 'Device Manager'."

  • 2

    Double-click "Network adapters", then right-click on your network device. Click 'properties '.

  • Sponsored links

    • Analysis software of CAN

      Economic and powerful CAN bus analysis and diagnostic software.

  www.CANCapture.com

• 3

  Click on the "Advanced" tab and scroll down the list of 'Property' to find all entries beginning with "Wake up" or "Wake up" in the entry. Click once on these entries and in the drop down box at the top right make sure it says 'None' or 'off '.

• 4

  Click the "Power Management" tab at the top and make sure that the "allow this device to wake up the computer"is not checked. " Click on 'OK '.

Mouse

• 5

  Open Device Manager, as above, and then double-click "Mouse" or 'mice and other pointing devices' right click of your mouse, and click 'properties '.

• 6

  Click the "Power management" tab and make sure that the "allow this device to wake the computer" is disabled.

• 9.0.2 CF multi server config, IIS site uses the connector bad, how do I change the connector to point to its own instance of CF

  Hello

  Yesterday, I found that an IIS site that is supposed to be connected to its own instance of CF is actually connected to another instance of CF. Our configuration is the following

  Windows Server 2008 R2, Coldfusion 9.0.2 Multi server enterprise edition, IIS 7

  Instances of ColdFusion: P1, P2, V1

  Clusters: Primaire1: contains P1 & P2

  Site1 IIS Web site is connected to the Cluster primaire1

  Site2 IIS Web site is connected instance CF V1

  I myself stopped instance CF V1, but IIS V1 site was still running. After much digging, I found this site V1 is not actually connected to the CF P1, an instance of CF V1 instance. I used the web site1 at CF instance V1 connection configuration tool. In IIS the JWildCardHandler site1 points to \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. JWildCardHandler for site2 points to the same directory \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. Here is my dilemma. How can I get JWildCardHandler site2 to point to its own folder under \JRun4\lib\wsconfig, say 14 instead of 3. I don't want to use the web config tool becauseI don't know if it will delete the folder ...\webconfig\3 if another site is still using it. I saw the web configuration tool remove the folder when you remove this connector in the tool.

  So I thought that I would try to manually configure the connectors. That's what I did

  Copy the folder wsconfig\3 wsconfig\14

  en...\wsconfig\wsconfig.properties - ensured site2 exist and referenced instance CF V1

  ...\wsconfig\14\jrun_iis6_wildcard.ini

  serverstore = /JRun4/lib/wsconfig/14jrunserver.store

  127.0.0.1:51007 = bootstrap - 51007 is the port of the proxy that the JRun Management Console is instance CF V1

  ... \wsconfig\jrunserver. Store

  proxyservers = (in file #3 set for P1 and P2 proxy ports)

  
  

  Then, I went into IIS and changed JWildCardHandler from site2 to \JRun4\lib\wsconfig\14 \jrun_iis6_wildcard.dll instead of \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. After you restart IIS sites site1 or site2 came. I went back in and came back JWildCardHandler back to the \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll site2 and they both come. I think that I restarted CF both times, but really forget that I was in a bit of fashion panic.

  
  

  Is that what sounds like it should work? Does anyone know of any files that I missed trying to configure site2 to point to the CF V1 instance? Any ideas are appreciated.

  
  

  Joe

  
  

  What I understood why 2 Web sites were using the same instance of Coldfusion. 2 Web sites share the same files, sharing the same web.config file. Change the JWildCardHandler, in IIS, for a website has changed the web.config file that is shared by both sites. If I find a way around it, I'll post my solution in case anyone else runs into this situation.

  Joe

• Insertion of the stills of DSLR in a mainly video project puts the stills in the video area leaving the video still visible on each side in the background - hints on how to fill the frame completely?

  Inserting still images on a mainly video project causes the video still visible to the left and to the right in the background. What I am doing wrong?

  iansilver

  What version of Premiere Elements and what operating system is involved?

  Can I assume that the stills are on Video 2 video 1 video above?

  If this is the case, place the indicator of the timeline on the still, click on the still image in the editing area monitor to display the bounding box of the image.

  Then use one of the handles of the bounding box to scale the image to fill the monitor space just at the point where the image below is not seen.

  What is your predefined project?

  What are the properties of your source media? And, did you, yourself or the project define the project preset to match the properties of the media source?

  What are the dimensions in pixels of these photos that you import into the project?

  What effect you are trying to create with these stills? Just in case message... the content on the top rail will be visible and content on a lower rail just below it will not be unless there are areas of transparency within the content of the upper track. If there are areas of transparency within the content of the upper track, then the lower content of track appear across these areas. Looks like what happens for you. In addition, Premiere Elements represents transparency as black, not black.

  Please review and study and explain what your goal edition is here. For questions about the questions or the comments above, feel free to ask.

  Thank you.

  RTA