The display is large

Similar Questions

• The display is large and fuzzy

  Desktop display is expanded and not clear/crisp.  How can I change it back to the original settings?

  Use system restore to restore your system to a previous state when it was working fine

  =================

  1. click 'Start' and type system restore in the search box, and then click "System Restore" in the section programs.

  When you are prompted by the User Account Control feature, click "continue".

  2. do one of the following

  * If there is a recommended restore point, click on choose a different restore point and then click Next.

  * If there no restore points recommended in the list, simply click next to continue.

  3. Select a restore point in which you know that the operating system works and then click on "next".

  5. on the confirm your restore point page, click 'Finish', if this post can help solve your problem, please click on the "Mark as answer" If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The display is larger than the screen. Zoom-out a frew times it cut OK how should I make it smaller?

  Recently, the size of the screen has gotten bigger than the screen and I have to either drag left/right to read it or (better) use the zoom to reduce to fit. How I put it so that it always fits without my nothing? It used to be like that!

  It is possible that the screen is too wide or too high.

  • Use Restore or expand in the context menu of the taskbar icon to set the focus to the Firefox application if you do not see the window of Firefox.
  • Open the system menu of the window of Firefox via Alt + space and see if you can move and resize the window (use the arrows on the keyboard).

  If it works, then first close all other open windows of Firefox and then close Firefox via "file > exit/Quit" to save the setting.

  If the above didn't help then see:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Options to change the display screen size are too large or too small.

  How can I change the display size to one I am comfortable with that? The options are too large or too small.

  Press the option key while you click chipped. Those are the only options available.

• I did the screen too small (using about: config) and lost the address bar and all the menus. How to restore the display on a screen size can be used?

  I changed the size of display screen using about: config, as stated in the other answers help. After you use a value of 1.0, such as recommended, I've experimented with other sizes, because it seems small. I have entered a large number by chance (a typing error) and made the display so small that only a bug could read. And I lost all the features: bar address, menus, home, Favorites, settings icons.

  I uninstalled and reinstalled Firefox, thinking that this would fix it. But the new facility displays the same way: unreadable and no functionality.

  I found instructions on resetting to the factory settings, but cannot perform this task because I have to be able to access the menus to do so.

  Hello PaulaBob, have you changed the value of layout.css.devPixelsPerPx? -You can perform the following steps to change the still 'blind ': value

  1. Open firefox, and then press ctrl + L (this will focus in the address bar)
  2. type of topic: config
  3. Press ENTER twice
  4. type devpix
  5. Press the tab key
  6. Press enter
  7. type 1.0
  8. Press ENTER again and I hope you should be normal visibility now

• How to change the display of my gmail settings? Now too small.

  Using IE8 to access my Gmail, it displays as larger, more legible than when I access via Firefox, where it is much smaller. How can I change the way in which this and other sites to display

  You can try the Firefox zoom feature. How to use Zoom? How | Firefox help

  When you use the mouse wheel, you can adjust and more small steps if you are using the Ctrl ++ / Ctrl +-method.

  Does that help?

• Satellite A200 - cannot download the display driver

  Hello

  I have the Satellite A200 with Intel X 3100 graphics card. I want to upgrade the display drivers. The only new driver for X 3100 is 7.14.10.1461 which is very large (146 MB) in size compared to those in the Intel support page (20 MB). With my bad connection, I am unable to download this driver. Why is this file so large? Is it possible to reduce the file size to the size provided by Intel?

  Despite, the Intel graphics drivers support page GM965 are 7.15 giving material support for SM 4.0 and OpenGL 2.0 + (AFAIK), in addition to many incompatibility has been resolved. However, in the Toshiba support page, the driver is very old (about a year and a half old). Is it not possible to update the drivers to those latest display?

  Thank you
  Sean

  Check to see if you can download the package in the coming days to view
  The packet size must be less than about 30-35MB ;)

• A problem with the display in a form with a ScatterGraph

  Hi all!
   
  Now, I want to do an image that can be expanded outside and inside with the viewport in a form with a ScatterGraph window. I tried previously to do this picture as a backdrop, but the backgroundpicture cannot be zoomed with the display window. How can I solve this problem?

  Here is the picture:

  

  Or I have to calculate a large amout of points to sign on the coordination of xy without the image, and how can I register quickly because it takes a long time to calculate.

  Hello

  You can zoom/dΘplacer an image as well as the plot in charts. Here is a snippet of code showing how you can do it.

  Normal
  0

  fake
  fake
  fake

  EN-US
  X NONE
  X NONE

  MicrosoftInternetExplorer4

  / * Style definitions * /.
  table. MsoNormalTable
  {mso-style-name: "Table Normal";}
  MSO-knew-rowband-size: 0;
  MSO-knew-colband-size: 0;
  MSO-style - noshow:yes;
  MSO-style-priority: 99;
  MSO-style - qformat:yes;
  "mso-style-parent:" ";" "
  MSO-padding-alt: 0 to 5.4pt 0 to 5.4pt;
  MSO-para-margin-top: 0;
  MSO-para-margin-right: 0;
  MSO-para-margin-bottom: 10.0pt;
  MSO-para-margin-left: 0;
  line-height: 115%;
  MSO-pagination: widow-orphan;
  font-size: 11.0pt;
  font family: 'Calibri', 'sans-serif ';
  MSO-ascii-font-family: Calibri;
  MSO-ascii-theme-make: minor-latin;
  mso-fareast-font-family: "Times New Roman";
  mso-fareast-theme-make: minor-fareast.
  MSO-hansi-font-family: Calibri;
  MSO-hansi-theme-make: minor-latin ;}
  table. MsoTableGrid
  {mso-style-name: "Table Grid";}
  MSO-knew-rowband-size: 0;
  MSO-knew-colband-size: 0;
  MSO-style-priority: 59;
  MSO-style-unhide: no;
  black border: solid 1.0pt;
  MSO - border - themecolor:text1;
  MSO-border-alt: solid black .5pt;
  MSO - border - themecolor:text1;
  MSO-padding-alt: 0 to 5.4pt 0 to 5.4pt;
  MSO - border - black insideh:.5pt United.
  MSO-border-insideh - themecolor:text1;
  MSO - border - black insidev:.5pt United.
  MSO-border-information - themecolor:text1;
  MSO-para-margin: 0;
  MSO-para-margin-bottom: .0001pt;
  MSO-pagination: widow-orphan;
  font-size: 11.0pt;
  font family: 'Calibri', 'sans-serif ';
  MSO-ascii-font-family: Calibri;
  MSO-ascii-theme-make: minor-latin;
  MSO-hansi-font-family: Calibri;
  MSO-hansi-theme-make: minor-latin ;}

  Image img = Bitmap.FromFile ("myImage.jpg"); in pixels, this is the place where the image will be drawn RectangleF initialRectangle = Rectangle.Empty; in the data, to map coordinates the image XRange range; Range yRange; Private Sub PlotMyData() { plot your data here xData double [] = new double [] {3, 5, 7, 5, 8, 3, 7, 8, 2, 6}; Double] yData = new double [] {9, 1, 2, 6, 8, 3, 3, 6, 2, 2}; scatterGraph1.PlotXY (xData, yData); xRange and yRange define the plot area limits left-top to bottom-right xRange = new range (xAxis1.Range.Minimum, xAxis1.Range.Maximum); yRange = new range (yAxis1.Range.Minimum, yAxis1.Range.Maximum); RecalculateImageBounds(); } Simply map the data coordinates values in pixels posts from the top left and lower right must be mapped. Private Sub RecalculateImageBounds() { PointF size = scatterPlot1.MapDataPoint (scatterGraph1.PlotAreaBounds, (xRange.Maximum, yRange.Minimum); initialRectangle.Location = scatterPlot1.MapDataPoint (scatterGraph1.PlotAreaBounds, xRange.Minimum, yRange.Maximum); initialRectangle.Width = size. X - initialRectangle.Location.X; initialRectangle.Height = size. Y - initialRectangle.Location.Y; } Just draw the image. Private Sub scatterGraph1_BeforeDrawPlot (sender As object, BeforeDrawXYPlotEventArgs (e) { RecalculateImageBounds(); e.Graphics.DrawImage (img, initialRectangle.X, initialRectangle.Y, (initialRectangle.Width, initialRectangle.Height); }

  Make sure that the image is of good quality so that you can zoom in pretty close.

  I hope this helps.

• Organize and manage the display

  I wrote a program on the analysis of the data. It is essentially a large program containing a number of nodes of formula. What is the best way to manage it so that I can easily record.

  the display also contains a lot of buttons and graphics. Is there a way through which I can switch automatically from one region to the other. Selection of some files and certain similar operations are usually required for the market for once only. It is possible to jump to the location next to the display panel after making the necessary here?

  Is it possible to access the next TAB automatically using logic on blockdigram?

  sukhiray wrote:

  I wrote a program on the analysis of the data. It is essentially a large program containing a number of nodes of formula. What is the best way to manage it so that I can easily record.

  What do formulas nodes? Can't answer your question since we do not know what you want "recheck". Please provide some details about what you're trying to do.

  the display also contains a lot of buttons and graphics. Is there a way through which I can switch automatically from one region to the other. Selection of some files and certain similar operations are usually required for the market for once only. It is possible to jump to the location next to the display panel after making the necessary here?

  Based on your other post , you seem to have done something relating to the tabs already, it seems that you have already answered your own question regarding the grouping of things.

  Is it possible to access the next TAB automatically using logic on blockdigram?

  Yes - just write a value to the terminal of the control tab on the block diagram. The value is the page to display. Right-click on the block diagram of the Terminal tab and select Create-> constant. Then select the page to display.

• If I buy adobe Elements 10 or later what software should I make the DVD to mov files, the files are large and I know they must be compressed and I don't want to lose quality... I know that adobe pro you still need software, but will still work with el

  If I buy adobe Elements 10 or later what software should I make the DVD to mov files, the files are large and I know they must be compressed and I don't want to lose quality... I know that adobe pro you still need software, but will still work with the elements and may itself make the compression... I know it can burn DVDs...

  vidog

  If you burn to a DVD disc in first items 10 and later versions, some choices are

  a. DVD-VIDEO standard screen or 4:3 16:9 on DVD disc

  Both will have the frame size of 720 x 480 pixels. But the big screen comes with a 16:9 flag that extends approximately 856/480 16:9 display video after encoding. The screening is not adjustable by the user... and you end up with the DVD-VIDEO format @ 29.97 images per second interlaced.

  b. format of the AVCHD on DVD

  Here is the video display 1920 x 1080. And, depending on the version, can be 29.97 images interlaced per second, or 23.976 progressive frames per second (if not just 29.97 images per second interlaced). Although you can generate some AVCHD DVD with a regular DVD burner, DVD AVCHD is in need of a blu - ray player that supports supported AVCHD DVD or one of these drives multimedia multi which is also.

  c. If the player allows... you can export your Timeline file saved on a USB Flash drive and then insert this USB Flash drive in the drive to get the reading of the file. On this route, you can set the Premiere Elements avancΘs to customize your choice of export preset.

  Please consult the bulletin and consider then, let us know if we have targeted your question. If this isn't the case, please give more details in the areas where we do not have.

  Thank you.

  RTA

• How to change the display resolution of APEX?

  Hi guys,.
  
  How to change the display resolution of APEX?
  In other words, if an end-user sees large elements on a page, then it zoomed out there... How can I define a good zoom LENS for my default application...
  
  I hope that my question is simple...
  Kind regards
  Fateh

  Fateh says:

  I hope that my question is simple...

  Nope.

  How to change the display resolution of APEX?

  APEX is not a resolution of the screen. 'Screen resolution' is a property of the device, user agent software used to view the page APEX.

  What do you mean by "resolution of the screen of the APEX?

  In other words, if an end-user sees large elements on a page

  What "big items?

  then it the zoom out

  How?

  "Zooms", what - the whole page or 'big one '?

  How can I define a good zoom LENS for my default application...

  Which means what?

  And as usual, we are missing:

• Full version of APEX
  
• Complete operating system DB, version, edition, host
  
• Architecture of Web server (EPG, SST or APEX listener/host operating system)
  
• Browser (s) and version (s) used
  
• Theme
  
• Model (s)
  
• Region/item (s)

  You have been posting here for years. You know this basic information is needed to understand and reproduce problems.

  If you need help it does not seem unreasonable that you made the effort to provide a complete, clear but a concise description of the problem or need.

• The display area moves and focuses on the object when it is selected

  I recently downloaded 6 Captivate and when you edit a slide if I select a subject it focuses on the object and he spends a large part of the blade out of the display area.

  For example, I'm working on a blade with about 10 possible answers multiple choice quiz and as I change these answers he focuses on the first answer while he is sitting on it. For me change the background display options I manually move the slide because I can see them no longer.

  I'm sure that there is a simple answer, but I checked the preferences, opinions, online forums and I can't find anything on this and it's driving me crazy.

  Thank you!

  Hello

  You can also view > view and then zoom back, to decrease the size of the slide in the main pane.

  Or

  If there is no unexpected behavior when you use the workspace or by using features, you can reset the preferences:

  Here is the procedure:

  Captivate's preferences folder location is:

  [Windows 7: C:\Users\[user name] folder of Captivate 6 \Local\Adobe\Adobe \AppData (hidden folder)

  Windows XP: Settings\Application Data\Adobe\Adobe Captivate 6 record - [user name] C:\Documents and Settings\

  Mac: /Users/ [user name] / Library/Preferences/Adobe Captivate 6 folder

  You will first need to close Captivate 6 and then rename the folder 6 Captivate 6_OLD Captivate.

  Then restart the captivate and check if this solves this problem.

  Re-create the preferences resets all settings and customization of Captivate, but won't have any changes to your project.

  Thank you.

• The size of the estimated value of the project is larger than the chosen target support

  I am at a loss for trying to create a project using Adobe Encore.  I tried initially to the author of the project using the CS2 version.  When you try to export, I received the following message is displayed:

  "The size of the estimated value of the project is larger than the chosen target support.  While it is an estimate, the project may not build. »

  I have created hundreds of projects in the past, but have never received this message before.  I first thought that the problem was with the release of still I used, but I got the exact error that even trying to create the project with Encore CS5.

  The project itself has a menu, a motion menu, and a single video file.  The video file 152 last minute, and I was trying to export that to a double layer DVD.  I tried from the file using CS5.5 Adobe Premier export using a variety of parameters.  I'm trying to export it to a file DVD-2, with the attributes of soure game being the highest value.  The parameter on the main concept MPEG encoder is set to 5. I tried to export the file by using the constant and variable bitrates.

  When I recently exported the file using a contant 6.5 sampling rate, I still 650,4 Mo still remaining on my project.  I still received the same error message on the size of the project, and so I think that something is wrong.

  I even exported the video file into an AVI file compressed and then tried to coding again using CS5.5 Adobe Premier and Adobe encoder.  I always get the same error message on the size of the file.

  Any help or suggestions on how to solve this problem would be greatly appreciated.  Thank you!

  If you do not finish with wasted discs...

  Create an ISO (yet), or a folder on your hard drive (still or Premiere Elements), then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO on DVD or BluRay drive (send the author a PayPal donation if you like his program)

  .

  ImgBurn will read the mark of REAL from the disk drive, which isn't always the same as the label for the box (Memorex is known for 'nothing' buy and put inside a box of Memorex)

  .

  When you write on the disk with Imgburn, use speed SLOWEST possible setting, so your burner has the best chance to create "good, well trained" laser drill holes... Since no DVD drive is required to read a burned disc, have a 'good' after a try to white high quality will help

  .

  Use Taiyo Yuden simple layer or layer two Verbatim

  Or Falcon Pro for inkjet printable two layer

• You can dim the brightness of the display of the alarm

  I tried the alarm on my new Apple Watch. The screen lights up a few minutes before the alarm sounds. It gradually increases in brightness. The problem is how bright Gets the display before the alarm sounds. He woke up before the alarm - it was like a flashlight shining in my eyes. Is it possible to adjust the brightness levels fir alarm?

  Try adjusting the brightness slider > https://help.apple.com/watch/#/apd62807a9f3

• Apple Watch sport does not work correctly. The display is 'crazy' once or twice a week and I need to force restart it. Do you know what is happening with the watch? Is this a common failure?

  Apple Watch isn't working properly. The display is to be 'crazy' once or twice a week. And I need to force restart it. Is this a common failure?

  Hello

  This isn't a failure or defect.

  Zoom (an accessibility function) has been activated on your watch and you are zoomed accidentally tapping on the screen in a particular way.

  • To turn off the Zoom:
    • On your iPhone, in the application of the watch, go to: My Watch (tab) > general > accessibility > Zoom - put it off.
    • Or on your watch, go to: homescreen (via a simple press on the digital Crown) > (cog icon) settings > general > accessibility > Zoom - tap and enable / disable.
  • If the accessibility shortcut has been enabled and configured for the Zoom, you can also enable and disable functionality more conveniently:
    • On your watch: quickly press the digital Crown (the round button) three times.
  • To set up accessibility shortcuts:
    • On your iPhone, in the application of the watch, go to: Watch My > general > accessibility > accessibility shortcut (bottom) > select / deselect Zoom.