the question of user applmgr.

Similar Questions

• When the computer starts first to the top, a window titled "run as" the question "which user account do you want to use to run this program?

  Original title: which user account you want to use to run this program?

  I use a computer that is running Windows XP SP3. Recently, when the computer starts first to the top, a window will appear titled ' run as ' the question "which user account do you want to use to run this program?" with two radio buttons. The default selection is "Current user" and there is a checkbox to "protect my computer and data from unauthorized program activity. The other button is for "the next user. I have to click 'OK' before you can run any programs.

  There is only one user on the computer. Why has this window began to appear and can I get rid of him?

  Hello

  That you recently installed which triggers this popup message initially upwards?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• Hi all, I have icloud email and password of the last iphone user, but iphone is blocked and he don't remember security questions. Send the same as apple ID. I have all chansements to unlock in the appstore?

  Hi all, I have icloud email and password of the last iphone user, but iphone is blocked and he don't remember security questions. Send the same as apple ID. I have all chansements to unlock in the appstore?

  You can not unlock with the AppStore. Request a refund or ask the previous owner to retrieve his password:

  Check these items and follow the instructions.

  If you have forgotten your Apple - Apple Support ID

  If you forgot your Apple ID - Apple Support password

  https://iforgot.Apple.com/appleid

• The question for quiz user

  Hello

  I use 8 Captivate. Y at - it marked a way for a learner to see the full list of quiz questions - with answers, correct/incorrect, after completing a quiz?

  I gave them your comments after each question and a total number of correct answers at the end, but some learners it would be useful to all the questions, with their answers, see on a screen.

  Thank you

  Laura

  You will need the user variables to store the good and the answer for each question. There are a few system quiz variables that are useful, such as cpQuizInfoAnswerChoice, but they are reused on each slide of the question. This means that you need to assign its value to a variable user for each slide of the question.

  Some tips for this variable should be found in:

  Secrets of cpQuizInfoAnswerChoice and... - Captivate blog

• Question about importing the roles of users through LCM HSS 11.1.2.1 MSAD

  Hello

  We use Hyperion Planning version 11.1.2.1. I tried to export user and group provisioning to prod environment and migrate there in the dev environment.

  The following steps have been

  1 open Hyperion Shared Services Console

  2 expanded Application groups

  3. scope of the Foundation

  4. click on Shared Services. I got a list of artifact on a new tab on the right side of the screen

  5 expanded native Directory. Some groups (Checked), roles and users

  6 click on define Migration and then did then, then, then on the following screens until I got a popup asking to "run the Migration.

  7 enforce Migration, I received a folder created under admin@NativeDirectory with 2 subfolders (info and resources)

  I saw 3 csv files is created - Groups.csv, Roles.csv and Users.csv.

  Groups.csv contains all the groups and users in each group.

  Users.csv contains all the users belonging to the Native directory

  Roles.csv was surprisingly an empty file (don't know why)

  My question is

  1. how to export that 'Aboriginal group' has been implemented to what roles?

  2. how to export what Directory user external user (i.e. MSAD) has been put into service for what role?

  I need to import roles provided to the 'MSAD users' and 'Indigenous' of Prod to Dev env env. Since I'm not able to export to MSAD user roles and groups... I don't know how to do in this regard. Please help me with this. Thanks in advance.

  Assigned roles:

  http://www.Oracle.com/ocom/groups/public/@OTN/documents/digitalasset/103849.gif

  http://docs.Oracle.com/CD/E40248_01/EPM.1112/epm_migrate_planning_app/images/graphics/export_from_source_1.gif

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• View 3.12 decommission persistent user, then reconnect the question

  Hello

  I have a pool of offices with the following, automated, persistent attributes, the linked clone, 3.12.

  We have a number of users who have persistent assignments to a number of virtual desktops.

  Some of these users left the Department if I unnassigned them from the computers so that new users may be affected, I used the command vdmadmin.exe L d & lt; desktop_name & gt; u & lt; user_name & gt; -r.

  Everything worked well, new users joining the pool and they have been assigned automatically for desktop computers that I had unnassigned by previous users.

  Then some former users who had been returned to the Department, unnassigned now when they try to connect to the pool a number of questions arise:

  1. If a person is currently connected to their originating port, then the user gets an error message saying that it is y workstations none available in the pool, even if there are a lot of available workstations and new users can connect to and assign these workstations.

  2. If the person is connected to their desktop orginal then the former user is saved in their offices of origin, even if it is already assigned to another user. This translates to 2 users who connect on the same office persistent (not recover).

  for example:

  original user has assigned to the x Desktop

  user an office unnasigned x (via vdmadmin.exe)

  new user b assigned to the x Desktop

  user a logs back in: If user b is connected to the x Desktop = error message unable to connect, if user b is not connected to the office x = user a connected to the x Desktop

  user b logs in: If the user a is connected to the office x = error

  message unable to connect, if user a is not connected to the office x = b connected to user

  Office x

  Anyone know how to remove the user from the allocation of funds without deleting workstations? Course the vdmadmin command removes only the user desktop, not the user's desktop.

  Thank you

  You are right.  It seemed to have misread the article, thanks for the clarification.   I noticed in the vdmadmin.exe L d < desktop_name > u < username > command - are-was not in front of the L.  I guess that was left by accident in the post which returns an error message from the command line.    Have you tried assigning users a different office in this pool by using the command line?  I wonder if they began after these assignments instead of logging in desktop already assigned.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• After a quiz can show you the questions and answers of the user to review of test

  After taking a quiz, is there a way to show the questions and answers of the user to review of passing the test.

  And those who failed the quiz would go to the first slide again to retake the test.

  Thank you

  Add an interactive object received, such as a button or slide 1 clickbox. Then the review will begin from there because Captivate counts of any object marked as belonging to the scope of Quiz.

• How can I FIND the question I asked before to see if there is an answer

  Where is that I should go to locate the question I posed and answers available, as appropriate.

  I've seen this question asked in a generally similar manner and the author of the question was directed to go to the location of their question to show all responses that might have been given - but there's nothing telling us how they came to this place. How do you get there?

  Suggestion: A user having to log-in to ask a question, then once a user logs in, it would be great if they could see a list of the questions they asked, and maybe a link that will lead to the location of this question and the answers that could have been provided by the community.

  A friend showed me how to locate my question (s). Thank you.

• What happened to the questions I asked in recent years?

  When I fly over my user name at the top of the support forum for mozilla and then click on 'My issues', I'm only showed my last two questions. What happened to all the question I asked in recent years? In addition, I'm more able to achieve this through getsatisfaction.comforum.

  Get satisfaction has been disabled in the past months. It's now the support forum. Nothing in the history was moved to the wire.

• In support, forum, signed in, where can I associate with the questions I ask myself? Years back, could get the RSS feed for the question. Always available?

  Where can I associate with my questions about my account? The search for user name does not work. A few years back, you could subscribe to an RSS feed for a question, yours or others. Is - this past, if so, why? How can you save the question, without saving your question text in a document and copy and paste into search? Version of FF 19.0.2.

  Thank you.

  Your messages will now appear in your profile: https://support.mozilla.org/en-US/user/225440

  You can also use the old method of "My Contributions" link: https://support.mozilla.org/questions?filter=my-contributions

  Is that it?

• Profile of Newbie Xcode provision of the question and problem recording peripheral Dev Member Center

  Help!  I am a user of Xcode newbie. Just signed up for a developer account (free version added to my existing Apple ID).   I followed a tutorial to make a few changes to the Apple TV 4. In the tutorials that seem very useful do not have additional info for potential problems as those I seem to face at every turn. As far as google can be useful, it can also be a time suck empty soul.  I have a life to live then all help to speed up the answers to these questions would be greatly appreciated.

  -Launch Xcode → click on create a new project in Xcode → select Application under tvOS → Application unique view, and then click Next. Fact

  - In the product name field, enter a unique name such as KodiAppleTVforYourNameHere (done, but I have a problem I can not find the answer to...), and then click Next → create

  The 'organization' identifier is empty and I do not know what to enter and the tutorial says nothing...

  

  - In the drop-down box team, select your personal team and click the question difficulty to solve problems of commissioning. You will ensure that you are connected to Xcode with a free Apple Developer account. You can learn how to do it using this tutorial.

  I get a "no provisioning profiles found.

  When you click on "solving the problem", I get a pop up saying "no device - create a profile doesn't require" fitted with a registered in space subscribers.

  

  Then I went to the Member Center and can not find the place where to save a device... nor can I find detailed (for a novice like me) instructions on how to do it.  I tried to follow these instructions, but had problems as shown below.

  1. go to Developer.apple.com...

  2. go in the "Member Center". (This is not an option that I see...)

  

  3. go in "Certificates, identifiers & profiles." (Went straight to this...)

  4 Select "Devices" on the left navigation. (nowhere to be found... and am stuck here...)

  

  .... 5. click on the sign "+" to add a device.

  .... 6. enter a name for the device and the UDID.

  .... 7. at the bottom of the page, select continue when you are finished.

  .... 8. at the bottom of the page, choose "Save" to save the new device. Repeat these steps to add up to 100 devices on a regular account.

  These steps seem easy enough, but I continue to find myself in a position that some things I should do just are not there... like the devices section not found in the center of development Member?

  Help or direction would be greatly appreciated.  Thank you!

  Have you ever this resolved? I'm having the same problem.

• where is the question that I submitted today on the software "Trashit?

  where is the question that I submitted today on the software "Trashit?

  We don't know because we are just users like you. If it has been removed by the hosts, you have received an email explaining why. It seems to be a 3rd party app, so it's not something that we build on this forum...

  See you soon,.

  GB

• Structure of the event without user interface

  I tried a quick and effective solution for a structure of event that is not a case of timeout and is part of a vi that has no user interface, but I have sent configuration data to the structure of the event.

  Let me be more clear: I have a camera that generates several events taken by a loop with the structure of the event inside.

  The provider of the camera give me this example of Labview code with all the events I'm interested and how they are implemented. I should mention that when you write a command of camera that a response to an event, but when you connect first to the camera there are more than 100 events generated by the latter, or when you download camera there are also several events. When there is no communication to the camera, the structure of the example event is inactive. The example includes a user interface to change settings and the program responds very well.

  I have to integrate this camera in great demand in which camera photo will be configured in a pragmatic way with number of the type of user interface in the example given by the manufacturer of the device.  First, I tried to design a loop with timeout cases in which a queue can send the data to the device setting configuration. Everything is good until the download when code needs to hold events in a certain way; in my case, an event is taken another goes to the time-out period and so on. After two sets of 100 images download, during the third round Labview gets blocked (Labview not responding) and I have to kill Labview. I got designer of the camera that if camera events are not taken they are kept on a pile and when the battery is full causes the Labview locked.

  Maybe I give too many details, but the question is: how to communicate with a struct event that is not a case of timeout and does not part of a user interface vi (it doesn't have a sign in my application)?

  Oops... Sorry about that.  I've attached an example what I'm talking about here.

  -Austin

• What are some of the requests of users likely to be assigned to an officer IT worked at the Department of STI?

  What are some of the requests of users likely to be assigned to an officer IT worked at the Department of STI?

  Hello taki5910,

  This issue is beyond the scope of this forum.

  Please post this question on the TechNet forums:

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Best regards

  Matthew_Ha

• What happened to the question/problem, that I just posted? You meet serious accidents on your servers that removes messages?

  I can't find the post I recently set up here. Have you had an accident which deleted all recent messages?
  I wanted to write comments to a suggestion that I got here, which was the use of Acronis as a backup manager...
  Manufactured by MowGreen - thank you for your comments.
  But you might have some use of the comment, what I am to do - I actually tried on the backup program you suggested; Acronis.
  I don't know if you have ever tried to restore a backup? You said that you never 'had to' restore...
  I tried to make a backup of my fresh without Norton and all windows and then tried to restore the backup.

  For me, Acronis 2010 ATI seems pretty useless!

  He could not read that a backup of my discs Inter Raid 5 - OK, can be forgiven.
  But he could not read from a SATA vanilla which contained a backup.
  And when I tried the last option to put a backup on a DVD, the program crashed when trying to read the DVD that contains the backup.
  So you better hope that you never have any of your backups - you will never be able to read from this backup.

  On the problem using Windows Update.
  You said that Norton 360 v2 Online is totally incompatible with Windows Vista (or Windows Update?). I am running Windows XP - is the same true for XP?
  Is this true for the Norton 360 Version 3 too? All products current Norton is not compatible with Windows?

  Here is the text that has been deleted on the Forum server:

  More effective than a virus - KB930494 MS update ends with true Msg that Windows cannot now work correctly

  I started to reinstall Windows XP, after he has screwed up and I discovered that all the system snapshot
  I created backups worthless - MS removes automatically after 90 days...

  But when reinstalling Windows XP Pro MCE 2005 I managed to beat or dodge the many problems - like all the
  famous error when update .NET Framework 1.1 Service Pack 1 and many others
  Suddenly I met an error generated by Microsoft of NONRECOVERABLE type!

  While trying to install Windows, I agreed that Windows was full of bugs and security flaws and
  need a large number of fixpacks installed via Windows Update.
  Such a group of patches is called KB930494 and the full name is:

  .NET framework 1.0 Service Pack 3 SYSTEM. WEB. DLL and MSCOREE. DLL Security Update for Windows XP Media Center Edition and Windows XP Tablet PC Edition

  Windows Update gave a brief error msg that this update has failed and I have tried to run this update
  manually when it produces the following error message: (note he's telling the truth when it)
  claims that "Windows may not work correctly")

  ---
  KB930494 Setup error

  Error while updating your system.
  Windows XP has been partially updated and may not work properly.

  Ok
  ---

  So, this update of Microsoft killed my system - it sure that _ 'does not properly"more.
  Lots of things off, lots of BSOD...

  Og - of course I should have used the system restore and created a backup that I should come back...!
  I did well - but this bomb of viral type of Microsoft made sure it was not possible to create
  a valid system by restoring such a backup. Probably because half the file system matches the other.

  The worst part is - even if I try to reinstall Windows again, avoiding this Virus created by MS, how can I be sure that
  This will be the only disguised bomb nothing extraordinary provided by Windows Update as necessary security patches?

  So guys, what is the best utility backup/restore partition there?

  Rgds. E. Ben

  ---

  Have you checked on the KB930494.log that is in the WINDOW to see where the installation is a failure?
  
  On a clean install of MCE should no problem by installing the SYSTEM .NET Framework 1.0 Service Pack 3 WEB. DLL and MSCOREE. DLL Security Update for Windows XP Media Center Edition and Windows XP Edition Tablet PC less than security software interferes with the installation and/or corrupt .NET update package.

  In addition, it can be an order of updates for .NET 1.0 SP3 installation which will avoid the problem your system knows. You install updates in the order they are presented by automatic updates?

  See also:

  More detailed for .NET Framework 1.0 SP3 and 1.1 SP1 failures troubleshooting ideas
  Questions I've seen so far with the installation of .NET Framework 1.0 SP3 and 1.1 SP1

  As for the backup and restore utilities: http://www.google.com/#hl=en&safe=off&q=Disk+backup&aq=f&aqi=g10&oq=&fp=1&cad=b
  I use Acronis image on my MCE box, but have never had to restore it... yet.

  MowGreen MVP Data Center Management - update of safety Consumer Services

  ---
  Thank you for your response.

  I didn't know about the log file, but watching her (she is very large) it seems is it can only be useful to those writing or working with
  updates...?
  You want to send me the file here? (Probably too big). Or you want I send you the file to watch?

  Only say unique error Code I find gives the following:
  Windows XP has been partially updated and may not work properly.
  29.641: Update.exe extended error code = 0xf070

  Interesting piece of info about security SW, because I have Symantec Norton 360 v2 online riddled with bugs, but I'm not
  optimist that disable Norton 360 Windows Update would do the trick, especially since I had so much
  problems with most of the time updates .NET Framework - it seems that this Windows component is full of problems...

  On the question of the "order of Installation" I initially let Windows Update handle this the way he wanted to.
  After that giving the briefest mention that only KB930494 had failed, I then tried to revive this one update.

  Do you think the system can be restored using the REPAIR, or whatever, or I have to reinstall all windows
  from scratch?

  Kind regards

  ---
  Ben,

  There is no need to send or post the log, because the whole .NET updates installation and OS stability problems are caused by Norton 360.
  Suggest you clean boot Vista as being expected to eliminate all processes and services of Norton to interfere with the installation of the update.
  In fact, you'd be much better off dumping Norton 360 and installing a Windows-compatible antivirus software.
  Then launch their removal tool for Norton ensure all remnants no longer stay or run this tool (AppRemover) as she removes a long list of security products.
  Then download and install one of the free AVs that work well with Windows Vista, Avast or Antivir .

  You can probably repair the OS running sfc/scannow from an elevated command prompt .
  If that can't do the job, then perform an upgrade on the spot .

  MowGreen MVP Data Center Management - update of safety Consumer Services
  ---

  I can't find the post I recently put up here...

  Your history of validation can be found here: http://social.answers.microsoft.com/Forums/en-US/user/threads?user=errbebe

  Always reply to your original thread, please.
  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft