The table used to run very quickly

I read about 22000 records of weak financial data in a graph of candel stick. The table used to run very quickly, but now it works slow Koala after some small changes. Ideas of probable causes?

I figured out that the disabledDays was originally the slow almost 10 times slower

disabledDays = "{offDays}.

Tags: Flex

Similar Questions

  • iPhone 5 battery runs very quickly when using mobile data

    When I use mobile data on my iPhone 5, the battery seems to run out quickly. When I say fast, I mean very quickly, it will drop 100% completely dead in 20 minutes. What I do when I use mobile data is send some Snapchats and that's all. I left mobile data on, I have it on when I need to use it. I tried using mobile data for other things, and the same thing happens. Sometimes the phone will completely die to about 40% of the battery being left. I am almost convinced that I need at this point a new battery for my phone. Finally, I want to mention that these problems don't happen when you use mobile data, WiFi. Does anyone have any suggestions?

    iOS: version 9.0.2

    See the following article:

    https://www.Apple.com/support/iPhone5-battery/

    In addition, download the app from the battery life and see what it says about the health of your battery.

  • Trying to create the table using Clause any Union with Select multiple stmts

    The motion seeks to get the substring of the value to for example.
    If the value is * ASA 2 * then so do ASA
    where as if the value is * 1.5 TST * it sholud come as TST as wise for others too.
    I am trying to execute stmt SQL written but in error as below:

    * ' ORA-00998 must appoint this expression with the alias column 00998.00000 - must appoint this expression with the column alias. "

    CREATE TABLE TEST_CARE AS
    (
    SELECT row_id, old_care_lvl, SUBSTR(old_care_lvl,3), len test_care_lvl FROM
    WHERE LENGTH (old_care_lvl) = 5
    UNION ALL
    SELECT row_id, old_care_lvl, SUBSTR(old_care_lvl,3), len test_care_lvl FROM
    WHERE LENGTH (old_care_lvl) = 7
    UNION ALL
    SELECT row_id, old_care_lvl, SUBSTR(old_care_lvl,3), len test_care_lvl FROM
    WHERE LENGTH (old_care_lvl) = 14
    UNION ALL
    Row_id SELECT, old_care_lvl, SUBSTR (old_care_lvl, 3), LEN test_care_lvl
    WHERE LENGTH = 7 AND old_care_lvl (old_care_lvl) = "Regular."
    );

    I want to create the table using the above given the multiple selection by using the Union ALL clause, but trying to create run query error like "ORA-00998 must appoint this expression with the alias column 00998.00000 - must appoint this expression with the column alias.

    Please guide me how to approach to solve this problem.
    Thanks in advance.

    Try this->

    CREATE TABLE TEST_CARE
AS
  select *
  from (
          SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3), len FROM test_care_lvl
          WHERE LENGTH(old_care_lvl) =5
          UNION ALL
          SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3), len FROM test_care_lvl
          WHERE LENGTH(old_care_lvl) =7
          UNION ALL
          SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3), len FROM test_care_lvl
          WHERE LENGTH(old_care_lvl) =14
          UNION ALL
          SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3),LEN FROM test_care_lvl
          WHERE LENGTH(old_care_lvl) =7 AND old_care_lvl ='Regular'
      );

    N.B.: Not tested...

    Kind regards.

    LOULOU.

  • How to know the tables used in packages of a schema.

    How to know the tables used in packages of a pattern that I have connected.

    SELECT DISTINCT referenced_owner, referenced_name

    Of all_dependencies

    Owner WHERE = "MY_USER_NAME".

    AND type ('PACKAGE', 'BODY of PACKAGE')

    AND referenced_type = 'TABLE '.

  • How to insert image from mysql into the table using php and create the checkbox in the table?

    How can I insert image from mysql into the table using php and create the checkbox for each data as a vote? Here is my code...

    WELCOME

    connect_error) {die ("connection failed:".)} $conn-> connect_error); } $sql = "SELECT no, Calon, ID, of course, the Image OF THE candidates." $result = $conn-> Query; If ($resultat-> num_rows > 0) {echo ' '; export data of each line while ($row = $result-> fetch_assoc()) {"echo"}}
    NO Candidate INFO Vote
    " . $row ["no"]. "-" . $row ["Calon"]. "
    -" . $row ['ID']. "
    -" . $row ['class']. "
    "; } ECHO ' ' ;} else {echo '0 results' ;} $conn-> close();?} >

    hope someone can help me because I am a newbie in this program... need to finish this project... Thank you.

    If you have saved the file name in the database, it's pretty simple.

    echo '' . $row['description'] . '';

    Is the same for the box:

    echo '';

    If you have saved the image file in the database, it is much more complicated. I recommend you store only the file name in the database.

  • Satellite L850 - after 1 year of use battery runs out quickly

    Hi, through programs such as care or battery battery I see a Toshiba Satellite L850 * 48% battery wear * currently. I notice that a game, the battery runs out quickly, as the warm up by many things and often descalibra and behaves erratically.

    The laptop is a year old. Is it normal that the battery to wear so much in so little time?
    Would you accept a warranty or replacement of the battery may claim the wear caused by improper use?

    http://img690.imageshack.us/img690/6976/4f7k.jpg

    First, please note that the battery working time depends on the use of the laptop.
    Running applications heavy performance as a game would drain the battery very quickly. Why? Because parties such as GPU and CPU and cooling to highest performance and this modules needs power.
    Also using the laptop with higher brightness may drain the battery faster.

    You should also know that each battery would start to loose own performance after about 500 charge cycles. This is nothing unusual and happens to all batteries.

    In order to avoid or slow down this process, its recommended to calibrate the battery from time to time.
    Calibration of means of loading and unloading the battery fully.
    Charge the battery until it could be fully charged, then disconnect the power adapter and keep the battery discharge up to his completely empty. Repeat 2-3 times in the line.

  • To access the Tables using DB link.

    Hello friends,

    I have an env development and production.

    I created a public link to DB developing say mylink.

    Trying to access the development of production table using the following command say to access x table

    Table DEV to access the PROD x using dblink

    Select * from x@mylink;

    Got the error like:
    ORA-02019: description of the connection to the remote database not found
    02019 00000 - "description of the connection to the remote database not found"

    Any idea on why this error is coming...

    Thank you/kumar

    I have an env development and production.

    I created a public link to DB developing say mylink.

    Trying to access the development of production table using the following command say to access x table

    Table DEV to access the PROD x using dblink

    Select * from x@mylink;

    You try to run the query in the database of PROD. This query uses a DB link that points to the DEV database.
    Very simple to understand: as you use the LINK DB in the PROD database, obviously it should be in the area of PROD... right?
    Imagine you use a PROD ("DBLINK") object and it does not exist here. I have it?

    SELECT * FROM x@mylink;

    Here,
    x database DEV table
    myLink - DB LINK in the database of PROD (pointing to DEV)

    Please try this.
    HTH

    Published by: Vanessa B on December 25, 2012 12:24 AM

  • insert into the table using the loop and permanently display

    Hello

    I am trying to insert some values of loop loop run into two tables and trying to draw using Graph XY. I need values Joanie be inserted one by one in each iteration. But at the end of the iteration in the table, I get only last value... can someone help me?

    Hello Manu,

    use a shift register to store each table. BuildArray allows to add/Add (not Insert!) of new values in the table.

    Then you need not use an ExpressVI to create the chart, a knot simple bundle (as indicated in the context-sensitive help) is enough to create a field in a XY Chart...

    Example with a table:

    Keep in mind:

    It's not (memory/CPU time) effective to use for time of data acquisition time (giving rise to large Bay). Use different approaches then...

  • How can I get the number of rows in the table using Sunopsis API target in ODI 10 g?

    Hi guys,.

    In fact, I want to send an alert message as soon as the interface is run from a package. I've included alert OdiSendMail that sends an email once the interface is running.

    Could someone please tell how to get the number of rows inserted into the table the Sunopsis API target.

    I tried to use < % = odiRef.getNbRows () % >, but this has not worked for me. Since I am a beginner, could you please help out me

    This is my mail to send ODI format

    "The population of data managed to < % = odiRef.getSysDate () % >

    Total of lines in the target table is: < - need an API code-> "


    Kind regards

    Clinton

    Published by: LawrenceClinton on February 25, 2013 20:53

    Hello

    Create the project with details below variable

    Nom_de_variable: Total_Row_Count

    Type of variable: Variable discount

    Definition tab:
    Data type: digital
    Action: No persistent

    Refresh the tab:
    Schema: provide the schema of your repository to work and be

    SELECT log.nb_row
    THE journal of snp_step_log, snp_scen_step step
    WHERE log.nno = step.nno
    AND step.scen_no = (SELECT scen_no FROM snp_scen_step WHERE step_name='<%=odiRef.getPrevStepLog ('STEP_NAME") % > ')
    AND log.sess_no = '< % = odiRef.getSession ("SESS_NO") % >' code at low
    AND step.step_name = ' < % = odiRef.getPrevStepLog ("STEP_NAME") % > '

    Note: add this variable after the stage of interface in your package (after the interface anywhere you can place), you can add this variable before ODISendEmailNotification in your package

    call this varciable * #Total_Row_Count * in the Notification of ODISendEmail

    for example :

    Data has been fulfilled successfully in < % = odiRef.getSysDate () % >
    Total no of lines filled are: * #Total_Row_Count *

    it will work

    cordially,
    Phanikanth

    edited by: Phanikanth on February 28, 2013 01:13

    edited by: Phanikanth on February 28, 2013 01:14

  • Problem with the creation of the table using the parallel Council DEC

    Hello

    We have a database table (CARDS_TAB) with the 1,083,565,232 lines and has created a replica table called T_CARDS_NEW_201111. But the count in the new array is 1,083,566,976 the difference is row of 1744. I have no idea how the new table can contain more lines compared to the original table.
    Oracle version is 11.2.0.2.0.

    The two head of table were taken after creating the table. Script that was used to create the replica table is:
    CREATE TABLE T_CARDS_NEW_201111
TABLESPACE T_DATA_XLARGE07
PARTITION BY RANGE (CPS01_DATE_GENERATED)
SUBPARTITION BY LIST (CPS01_CURRENT_STATUS)
SUBPARTITION TEMPLATE
  (SUBPARTITION T_NULL VALUES (NULL),
   SUBPARTITION T_0 VALUES (0),
   SUBPARTITION T_1 VALUES (1),
   SUBPARTITION T_3 VALUES (3),
   SUBPARTITION T_OTHERS VALUES (DEFAULT)
  )
(
  PARTITION T_200612 VALUES LESS THAN (TO_DATE(' 2007-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    TABLESPACE T_DATA_XLARGE07
  ( SUBPARTITION T_200612_T_NULL VALUES (NULL)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_200612_T_0 VALUES (0)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_200612_T_1 VALUES (1)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_200612_T_3 VALUES (3)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_200612_T_OTHERS VALUES (DEFAULT)    TABLESPACE T_DATA_XLARGE07 ),
  PARTITION T_200701 VALUES LESS THAN (TO_DATE(' 2007-02-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    TABLESPACE T_DATA_XLARGE07
  ( SUBPARTITION T_200701_T_NULL VALUES (NULL)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_200701_T_0 VALUES (0)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_200701_T_1 VALUES (1)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_200701_T_3 VALUES (3)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_200701_T_OTHERS VALUES (DEFAULT)    TABLESPACE T_DATA_XLARGE07 )
.
.
.
.
.
  PARTITION T_201211 VALUES LESS THAN (TO_DATE(' 2012-12-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    TABLESPACE T_DATA_XLARGE07
  ( SUBPARTITION T_201211_T_NULL VALUES (NULL)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_201211_T_0 VALUES (0)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_201211_T_1 VALUES (1)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_201211_T_3 VALUES (3)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_201211_T_OTHERS VALUES (DEFAULT)    TABLESPACE T_DATA_XLARGE07 ),
  PARTITION T_201212 VALUES LESS THAN (TO_DATE(' 2013-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    TABLESPACE T_DATA_XLARGE07
  ( SUBPARTITION T_201212_T_NULL VALUES (NULL)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_201212_T_0 VALUES (0)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_201212_T_1 VALUES (1)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_201212_T_3 VALUES (3)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_201212_T_OTHERS VALUES (DEFAULT)    TABLESPACE T_DATA_XLARGE07 )
)
NOCACHE
NOPARALLEL
MONITORING
ENABLE ROW MOVEMENT
AS
SELECT /*+ PARALLEL (T,40) */ SERIAL_NUMBER     ,
  PIN_NUMBER        ,
  CARD_TYPE         ,
  DENOMINATION      ,
  DATE_GENERATED    ,
  LOG_PHY_IND       ,
  CARD_ID           ,
  OUTLET_CODE       ,
  MSISDN            ,
  BATCH_NUMBER      ,
  DATE_SOLD         ,
  DIST_CHANNEL      ,
  DATE_CEASED       ,
  DATE_PRINTED      ,
  DATE_RECHARGE     ,
  LOGICAL_ORDER_NR  ,
  DATE_AVAILABLE    ,
  CURRENT_STATUS    ,
  ACCESS_CODE        from CARDS_TAB T
/
    Database CARDS_TAB table also has a primary key on the column Serial_number. When you try to create a primary key on the new table he throws Exception:
    ALTER TABLE T_CARDS_NEW_201111 ADD
  CONSTRAINT T_PK2_1
 PRIMARY KEY  (SERIAL_NUMBER) USING INDEX
 TABLESPACE T_INDEX_XLARGE07
 PARALLEL 10 NOLOGGING;

  CONSTRAINT TP_PK2_1
             *
ERROR at line 2:
ORA-02437: cannot validate (T_PK2_1) - primary key violated
    Thanks in advance.

    With respect,
    Adeline Faure

    For parallel processing the documentation suggests the use automatic degree of parallelism (determined by the system running) or by choosing a power of 2 value
    Look at the post by Florian in your currently neighbor post How to remove duplicate rows from a Table to locate the violations (apparently due to parallel processing)

    Concerning

    Etbin

  • Rename the table require re-run the stats?

    OS: OEL (last) 64-bit
    DB: 11 GR 1 material

    I need to create a copy of a large table A in production (call of the new table B). The data are the same, but the physical layout of the tables is different (different partitioning scheme is used between table A and B).
    When I go to move table B to replace table A (which will be eventually abandoned), should I raise his stats on table B?

    It's
    (1) table to become A_OLD
    (2) table B becomes table A

    I have to raise its stats on table A in step (2)? Is there something else that needs to be done?
    (I do this to limit the impact to the GUI that uses this table - the name of the final table does not change so the GUI should not be affected).

    See you soon!

    user601798 wrote:
    Yes, I have to raise his stats on the 'new' A table even if it has the same data and the name (after renaming) but different partitioning scheme (physical model)? It seems to me that the answer would be 'yes '.
    Otherwise, not the optimizer does not fail to recognize the new partitioning?

    (1) Board toys (all data) and table Toys_New (empty)
    (2) the Toys_New table is loaded with toys data table (the two tables have the same data - only difference is partitioning)
    (2) the toys table is renamed table Toys_Old (this will be served at a later date)
    (4) table Toys_New is renamed table Toys

    And I was thinking - I forgot to talk about first-hand - Toys_New will have the same indexes, but of course the clues will have unique names from toys (to avoid the error "object already exists".

    Given that the last note, I am convinced more than stats must be run on Toys_New after step (4)

    See you soon!

    Yes, you must.

    Name of your new table is 'Toys', but this new table is totally different than the old toys. If you need to analyze the table again.

    Concerning

    Grosbois

  • Impossible to delete the record from the table using the form

    I have a stored procedure (function, actually) that allows an administrator to manually delete a record in a table.

    When I call my form there will be no effect. The record remains in the table.

    In both cases, I connect to the database to the same user.

    I am able to call a test function in the database which returns a field in the record, so I think I can at least communicate with and retrieve results from the database using a stored function. As soon as I approach him "select" "delete from", no luck.

    If I try to run the SQL in my form with a statement of FORMS_DDL, it seems to run smoothly when I not in the code in the debugger, but it had no effect. FORMS_SUCCESS reports TRUE if DBMS_ERROR_TEXT has the following: ORA-01403: no data found. I don't know how the DBMS_ERROR_TEXT is that FORMS_SUCCESS is not set to FALSE.

    Any ideas as to why I am unable to remove using my form but can when you call the function registered directly/manually?

    Using Oracle Forms & DB 10.0.2.0.1.

    Patrick,

    After each Insert / Update / Delete statement, you have to COMMIT . Then only it will be in select statements.

    Kind regards

    Manu.

  • Update the table using discoverer

    Hello

    I'm trying to update a table whenever the user runs a report of the Office of the discoverer. I tried to use a function to do the job, but I get the error below.

    ORA-14551: cannot perform the DML operation within a query.

    I also tried to
    1. create a procedure and update the table in this procedure.
    2. function to create and call the procedure created earlier in this function and use it in the discoverer, but still does not work and I get the same error ORA-14551.

    Please let me know if this is possible at all the. If SO, let me know the steps to do so.

    Thank you.

    Hello

    Yes you can update the discoverer dashboards using a PL/SQL function. You must make the function a standalone transaction. for example

    FUNCTION update_record (key_field VARCHAR2) RETURN VARCHAR2
    IS
    PRAGMA AUTONOMOUS_TRANSACTION;
    BEGIN
    ..
    UPDATE your_table
    ..
    COMMIT;
    ..

    Rod West

  • The Stimulus of the Table load and run in the stream or target RT via Ethernet?

    I need to re-read a CAN track with the high fidelity and sequencing of rapid fire. The PC operating system is in the way too much to be able to control this tight of the moment. It must be managed within the target in real time.

    Do the stimulus of the table the stimulus replay load data to the RT, and then run the target of RT, or don't work space running on the PC the data flow to the RT for execution? Streaming would be subject to delays of PC operating system and network transport times.

    Thanks in advance for your help.

    Table of stimulus data gets loaded completely in memory on the target of RT and are replayed from there. PC or network delays has no effect on reading as soon as it starts.

  • How to add data to the table using Manager POST for restful Apex application

    Hi all

    I managed to create a service application web Manager restful using GET for the Restful service module. I am able to get the data in row on the presentation of a table row id in the application. But I can't find an appropriate example, how the new data in the table can be posted or deleted. I created a POST handler for a URI scheme and look forward on how to proceed. Any help would be really appreciated.

    Source for the POST Manager:

    Start

    insert into ALL_BOOKS values(:id,:book);

    end;

    Also created 2 parameters id and the book.

    Hi jerry2134,

    jerry2134 wrote:

    I managed to create a service application web Manager restful using GET for the Restful service module. I am able to get the data in row on the presentation of a table row id in the application. But I can't find an appropriate example, how the new data in the table can be posted or deleted. I created a POST handler for a URI scheme and look forward on how to proceed. Any help would be really appreciated.

    Source for the POST Manager:

    Start

    insert into ALL_BOOKS values(:id,:book);

    end;

    Also created 2 parameters id and the book.

    Check out the following tutorials OBE, that explains the creation of GET and POST RESTful Web Services and how to use them in the APEX.

    Also what yo mean "looking forward on how to proceed? Do you want to or created for use/consume in your Oracle APEX application hosted RESTful web services?

    If Yes, in your Application, you must create a RESTful Web Service reference -> shared components. Then, create a form/report based on Web Service reference.

    Kind regards

    Kiran

Maybe you are looking for