The upgrade of the camera selections

Similar Questions

• Since upgrading my iPhone 5s IOS 9.3.5 yesterday, so I can't see the camera of the iPhone as a device in Windows do not seem to be a direct way to upload my pictures on my PC.  Is it possible to download my pictures to my PC without iCloud?

  Since upgrading my iPhone 5s IOS 9.3.5 yesterday, I see more the camera of the iPhone as a device in Windows.  Therefore, with this update of IOS, I do find a direct way to upload my pictures on my PC.  Is there a way to download my photos on my PC without having to download them to iCloud?  My PC is Windows 7 Pro (64 bit).

  What I've always done, is to download my photos directly on my PC by using the option to remove the iPhone with the download.  I really want to continue to do so!

  Thank you!

  Hello

  Follow the steps here:

  • Import photos and videos from your iPhone, iPad or iPod touch - Apple Support
  • If you cannot import pictures from your iPhone, iPad or iPod touch to your computer - Apple Support

• Is it possible to manually select the images that you want imported from the camera?

  original title: SLR digital import question

  is there a way to choose which images get imported when importing images from my Canon t2i to my laptop? most of the photos on my camera have been imported already and filled my hard drive, so I transferred to a portable hard drive to expand the memory and allow for me to continue to load/save my photos. I want to download only the pictures at the end of my memory chip, essentially without having to wait a long time for the other 300 + pictures to import the big file for each and the jpg version, accompanying all over again because they are mostly high-quality... (I keep the actual chips with pictures on them as a backup (have not printed on most of the photos I had even for albums, etc. so I don't want to lose anything by deleting after you import each time, because they are all the memories with my husband and 2 children..))

  is there a way to choose which images get imported when importing images from my Canon t2i to my laptop? most of the photos on my camera have been imported already and filled my hard drive, so I transferred to a portable hard drive to expand the memory and allow for me to continue to load/save my photos. I want to download only the pictures at the end of my memory chip, essentially without having to wait a long time for the other 300 + pictures to import the big file for each and the jpg version, accompanying all over again because they are mostly high-quality... (I keep the actual chips with pictures on them as a backup (have not printed on most of the photos I had even for albums, etc. so I don't want to lose anything by deleting after you import each time, because they are all the memories with my husband and 2 children..))

  ===================================

  Something to try...

  Connect the device to your PC via a USB cable and turn
  on the camera... If open windows... Close them.

  According to... to... Start / my computer... the camera can be
  listed as a drive letter...

  If_yes_right click on the drive letter and select... Explorer or
  Open... This should display the directory of the memory card.
  You can copy and paste or drag and drop the files from there to a
  folder on your hard drive.

  (The same steps work if you have a media player...
  When you go to... Start / desktop media slots...
  Drive should be listed under... "Removable disk" with a drive
  letter.)

• How to select the image through the gallery or the camera on the blackberry torch 9800?

  Hi all

  I developed the web application. In I want to select the image through the camera on the blackberry 9800 torch or Gallery. so I need the code for when I click the button to view the two options which is 1. take a picture of the camera and 2. Take a photo from the gallery... So please me to fact... Thanks in advance...

  With Ragards,

  Marimuthu_P

  Sorry, there is no API available on the old version of WebWorks for this. You must create your own extension "file picker".

• How to upgrade the Camera Raw plug in at least 8.6

  I bought a Panasonic FZ1000 camera. It provides RW2 files.

  Now, I need to update the camera RAW plug of 12 Photoshop elements.

  How can I do that?

  Piet

  p.d.FEI wrote:

  I bought a Panasonic FZ1000 camera. It provides RW2 files.

  Now, I need to update the camera RAW plug of 12 Photoshop elements.

  How can I do that?

  Piet

  FAQ: FAQ: is Photoshop Elements works with my camera, or why does not open my raw files?

  This means that the 12 elements is too old updated to 8.6.

  You must have at least PSE13 (PSE14 is now at 9.4)

  If you do not wan't to pay the upgrade, you can use the DNGconverter mentioned in this faq. You download this application free and independent (not a plugin); It can batch process all of a folder of your raw files to DNG format raw that your 12 elements can read and modify.

• I've upgraded to 2015 CC Photoshop today.  However, the quick selection tools and brush do not appear in a circular/round shape.  I tried to use the support key to enlarge to see if that brings the circle/round view form, but does not work.  All the I

  I've upgraded to 2015 CC Photoshop today.  However, the quick selection tools and brush do not appear in a circular/round shape.  I tried to use the support key to enlarge to see if it carries the form circle/round in sight, but it does not work.  All I get is a focus.  Can anyone help with this please.  Thank you.

  Remove the caps lock

• The older of the camera, there was a scene or stage spot. What is the best replacement for this scene selection

  The older of the camera, there was a scene or stage spot.  What is the best replacement for this scene selection

  The best replacement for staging Spotlight is probably the Night Portrait setting.

• Added information of the camera to Print output through all selected photographs

  Is there a way out of the camera information (as in the f-stop ISO Info etc) so that sound directly on the photograph during printing?

  Thanks in advance

  Print module > right side panel > section Page > Photo News > drop legend

• After the Camera Raw 8.4.1 update 8.5, he return to 8.0

  During last periodical updating creative cloud, I saw in the list update to ACR 8.5. After the update, I checked, and the Bridge and Photoshop, ACR version back to 8.0. 8.4.1 was before the upgrade. In order, I tried to:

  (1) update of the internal functions of Bridge and Photoshop. Result of update check has been that it has developed to date available (ACR was on the list as an application)

  (2) install manually the ACR 8.5 from a manual update package indicated in a similar post on this forum.

  (3) uninstall Bridge and Photoshop.

  (4) re - install Bridge and Photoshop.

  After all actions, the ACR version always is 8.0. I'm really surprised, because I do not understand whence version 8.0, as before the update my version was 8.4.1.

  Windows 7 64-bit operating system

  Bridge CC 6.0

  Photoshop CC 2014

  Can someone help me?

  I assembled the two responses of Noel and Ashutosh who performed in the following order, allow me to work around the bug in the update.

  Many thanks to Noel and Ashutosh

  I don't know how geeky you want to get, but if you're a comfortable browsing files and zip files, here a manual technique that works...

  Close Photoshop first, then:

  1. Download here the manual update link 8.5: don't run the installer, but rather just Open the file in Windows Explorer zipr.
      
     http://swupdl.Adobe.com/updates/OOBE/aam20/win/PhotoshopCameraRaw8-8.0/8.5.50/Setup.zip
  2. Navigate in the zip file to find the resources that match the 64 or 32 bit version of Photoshop you're running.  I assume that you have installed the 64-bit version, so the rest of the instructions will focus on 64-bit Camera Raw.8bi only.  Here is the way:
      
     Setup.zip ------ payloads-AdobeCameraRaw8.0All - x 64-050614143245 ------ Assets1_1.zip
      
     The file within Assets1_1.zip, named 1002, is actually the Camera Raw.8bi file for 64 bit, just with a different name.
  3. Copy your folder on your computer where your Camera Raw.8bi lives normally, for example, 1002
       
     C:\Program Files\Fichiers Adobe Plug-Ins\CC\File Formats
         
  4. Rename the old Camera Raw.8bi file to Camera Raw.8bi_8.0. It is important that the extension is changed to something other than .8bi.
          
  5. 1002 and rename Camera Raw.8bi
     
  6. Run Photoshop and check the version of Camera Raw by selecting help - all plug-ins... - Camera Raw.

  -Christmas

  Please install the following link DNG Converter. This would update the profiles of the camera to version 8.5. .

  http://blogs.Adobe.com/Crawlspace/2011/03/keeping-Photoshop-up-to-date.html#CurrentVersion

• Send to compressor: how to choose the camera

  Hello

  I apologize if this is a really stupid question, I'm quite new to Motion 5.

  If I am not mistaken, with send to compressor, using the multi-passages option, and other compressor optimized parameters will result in the export of better quality, if this is true, it's the method that I would use for my final exports.  (If I'm wrong, please correct me and let me know which will give the best final ProRes 4444 60 fps 1080 p export - I then import them using FCPX and do a little cut etc, then exporting to h.264 final 60 fps 1080 p).

  Anyway, to my question, how choose them which camera I want to export?

  I choose 'Export using compressor settings,' and then I give myself the opportunity to choose which camera, but I no longer like the options of compressor, where I can choose to use multi-pass and all other settings.

  I tried selecting the camera that I want to export, and then "Send to compressor", but that does not work, it does not use the camera, I chose.  I have a total of eight cameras, so to choose which device I export is quite important for this odd project.

  The answer could be made obvious, once again, I apologize if this is a really stupid question.

  Thanks in advance for any thoughts.

  (Motion 5, compressor 4, El Capitan)

  If you use 'Export using compressor settings' this essentially load presets created in compressor without going into the application, so it has minimal options for adjustment.  What you want to do, you should be able to create a preset in compressor with the settings you need.  Then moving when you use "Compressor to help export settings" select your preset and in the Render tab, there is the section of 3D rendering, you can select the camera you want to copy.  By default, it should be 'Active Caméra', but you can select your other cameras as well.

• The camera shutter closed unless I'm in the Mode Selfie

  I have an iPhone 5 c to 2014. Some time back (honestly don't know when) I upgraded to iOS 9.3.2 and the new 'carrier' updated. When I've done that my function "flashlight" began to complain of being too hot and does not not (even when it was inside an air-conditioned building.) Then my camera started working 'not' on occasion, in other words, he wasn't reliable - it turns out that what I had was the shutter being closed on the rear camera and when I go to the camera front it will make selfies and selfie-video very well. I've erased everything, back to 'new phone' status and still no camera on the back side so I'm going back to my old restoration (yet 9.3.2 iOS).

  Someone has an idea of what past? I mean, I'm over my 2-year contract with Verizon and now iOS knows I should get my new iPhone 6 + but I really love this monthly phone bill at low prices!

  Ciao, Dave

  You see a black screen or a closed lens

  If you see a closed lens or a black screen when you open the camera app, try the following steps:

  1. Make sure that there is nothing of blocking the lens from the camera. If you use a case, try to remove it.
  2. Force the application to close, then open the camera again.
  3. Restart your device, and then open the camera again.
  4. If your device has a front and rear camera, both cameras by tapping try . If you see the firm objective or black screen on one camera, take your device to an Apple Store or Service provider authorized to obtain assistance.

  Apple's Support read here > get help with the camera on your iPhone, iPad or iPod touch - Apple Support

• FaceTime Camera: the green light next to the camera makes a slow blink, and there is no picture

  MacBook (retina, 12 inch, early 2015) El Capitan 10.11.5 now ongoing enforcement.

  Whenever I try to access the camera FaceTime (FaceTime, Photo Booth Apps) the green light next to the camera made a slow blink, and there is no picture.

  The system report > camera > model ID: Apple camera VendorID_0x106B ProductID_0x1570

  The numbers of the vendor and the product are correct?

  The camera worked for 6 months passed and I used FaceTime several times without problem.  Several users are affected.

  None of the recent changes to the system.

  Since the problem began, I have:

  (1) installed Skype to see if one application other than an Apple app had a camera problem. Skype has no camera or.

  (2) improved 10.10.4 to El Capitan Yosemite.  Hoping that the upgrade would reload the application Face Time.   No change in symptoms

  (3) reinstalled the El Capitan using the OS X Internet recovery.  I have not used the time Machine.

  (Note for everyone, it was simple and painless and does not need to reinstall applications.)  I want to reinstall MS OS was too simple)

  (4) several other threads suggested to reset NVRAM and SMC memory, even if they do not seem to be associated with the prob. who - without success here tried either

  Any advice to determine whether it is hardware or software?  Still dig while you wait for a response.

  Note: This problem is not resolved

  Also, over How to troubleshoot the iSight - Apple Support .  Any assistance to the problem.

• Satellite on Mini L9W - B - malfunction of the camera

  I have been using cameras with success until a few days ago - when I select the camera app display shoes the message 'to start, connect a camera. "

  I did all the checks that are recommended without success (see my other post ' external storage device is no longer recognized ")

  what Miss me?

  Hello

  Looks like you're missing drivers, if you have updated to 10 Windows, the device drivers are a little skittish, as far as I know, they could be skittish at the point 8.1. Pilots are not easy to find, go to Device Manager and see if something has been reported as non-functioning, then delve a bit into the details of device information to identify which device is which. Both cameras are:

  Camera sensor (rear) AR0543 and
  Camera sensor OV2722 (front)

  How to install the drivers is to go through Device Manager, select with the option "choose from a list of drivers installed on this computer" and you will find them listed in the section "system devices".

  I hope this helps!

  Posted by stickyfingerstuff
  

  I have been using cameras with success until a few days ago - when I select the camera app display shoes the message 'to start, connect a camera. "

  I did all the checks that are recommended without success (see my other post ' external storage device is no longer recognized ")

  what Miss me?

• When you use the camera of the iPhone APP to send an e-mail, there is no saved project and I lose the message.  Is this normal?

  When I use the camera of the iPhone APP to send a photo by e-mail, I find that I lose the message when I change to another application.  Basically, no project is not registered anywhere.  Am I missing something simple?  Ex: Open Camera APP, select the image for the email, and then try to open the calendar, and then return to the message to add more content... where he?

  I had never tried your method before, but after testing three times, I got the same results as you did. However, if I manually saved the project (press Cancel, then save the draft) in the camera application, it was recorded in the messaging application, when I went there. If I use the photos app to send the photo to go, I can start the email, launch another application, return to the Photos app and the email is always on the screen.

  IF you want to send a picture with an email, do not use the camera application. There is no need to do so. You can use the messaging application or the photos app in order to attach a photo. You have access to all your photos in an application.

• Need software/drivers for the Cam MiniDV DCR-TRV25

  I have owned one of these great little cameras Sony miniDV since 2003 - in fact I love it so much, I bought a 'reserve' on ebay a few months ago.

  The problem is when my laptop crashed, I lost the initial load of the original factory driver for the camera software... and I can't find the original anywhere drive. None of my web searches have found links to reload the driver.

  Even more amazing, I started using Sony Vegas Movie Studio clean - but it plain refuses to import video from his OWN camera - saying that it does not recognize the device.

  What are my options and alternatives for this?

  NC to LB, CA

  Hello. For your computer to recognize the device, if it was recognized before, would mean that either your use of Windows XP or an older operating system. Unfortunately, USB streaming is not supported by Windows Vista, Windows 7 and Mac. But using a different connection: IEEE1394 (i.link or firewire) connection it should work with these operating systems. Going up that probably you just need to install the driver for the camera, you should be able to get it here:

  http://eSupport.Sony.com/us/Perl/SWU-Li... l = DCRTRV25

  Select your operating system from the menu drop down and download and install the device driver (Driver USB for Connection). Make sure that the camcorder is not connected to your computer while installing the driver. Follow the instructions below the USB driver for the login page properly install the driver. Restart the computer and connect the camcorder. Complete the installation of new hardware found. Also make sure that your camcorder USB Stream function is set on IT. Use the application pre-installed Windows Movie Maker or compatible video capture software to capture video to off the Strip. I hope this helps.