Tip action does not follow the direction 'else '.

Similar Questions

• What happens if the footsteps does not, follow the directions in the database

  
  
  

• Report does not follow the order of the columns Select

  Hi all
  
  Apex 2.2 on 10gXE
  
  I still encounter this problem, the report display column does not follow the sequence of the select column from the source of 'region '.
  It is very painful by clicking the arrow up/down one by one in the 'attributes of report"especially if the columns in the view are very much like 40 columns.
  Is there a fix/patch or other tips for this bug?
  
  
  Thank you very much
  
  Published by: 843228 on May 24, 2011 22:32

  But if I use modified the query, the edition/search/default propagation sheet / buttons disappeared.

  These can be copied or moved to the new report area.

  So, there is no work around in apex 2.0? and this problem is solved in the apex 4.0?

  There is no workaround in 2.x, nor is there a solution to 4.0 because there is no problem: APEX works as expected.

  Apex 4.0 can run in 10gXE my free database?

  Yes.

  Can you give me docs on how to change it please...

  Upgrade of Oracle Application Express in Oracle Database 10 g Express Edition (XE)

  (Update your forum with a handful profile better than "843228".)

• Tip action does not work when I add a second block of decision

  I'm writing an advanced action 8 Captivate. In response to a question about the points, the user types a number in a text entry area. When they support, the fast action will assess the number. If it is 10, the program should jump to a slide that shows that 10 is the right answer. (When I do just that in a single block of decision, it works.)

  However, the full tip action must assess if the value is higher or lower than 10, then return the user to the question slide and displays an appropriate message. When I add the part in a second decision block, advanced action performs as expected if an incorrect value is entered, but does not work if the correct value is entered. It does is display the question slide once again.

  Here is the code:

  

  Any ideas on what I am doing wrong? Should there be an ELSE statement in the first block of decision? I tried to continue, but that did not help.

  -Stuart

  The logic of your advanced action is not correct. All decisions are always evaluated. What is happening here is the following:

  1. First decision check if var is equal to 10; If this is the case, it will change to slide 2
  2. Second decision check if var is greater than 10, if it is accurate, it will move on to slide 1. I guess the capPoints1High is ON slide 1?
  3. BUT here's the logic bug: If If is not greater than 10, which is also the case when it is equal to 10, it will change to slide 1, although already, he jumped to slide 2 first with the first decisioin

  Two possible solutions:

  1. decision of the switch 1 and 2 (one easier)
  2. remove the ELSE part of decision 2 and create a decision 3 to check if var is less than 10

• OATS: script entering does not in the if-else statements

  I created a functional test using Oracle's Web. My database file (.csv) contains a number of numbers that are used to browse through the script with different values. now in my loop for, I have included an if-else with action statements in these (Actions like) by clicking on the different tabs. Now, when I run my script, is to not enter the if-else statement and jumping directly to the next step.

  Here are my script:

  beginStep ("search page", 5)

  {page opening}

  String Var1 = (string) 'value from the .csv data bank ";

  for (int i = 1; i < = 2; i ++)

  {

  beginstep("/ASC",0)

  {

  if(var1=="ABC")

  {

  Task1;

  Task2;

  }

  ElseIf (Var1 == "efg")

  {

  Task1;

  Task2 ;}

  }

  }

  endStep();

  beginStep("/asc",0)

  {

  Task3;

  Task4;

  }

  endStep();

  }

  According to my above script, the script is to jump directly to TAsk3 and 4, instead of going to task if-else performing 1 and 2.

  Thanks in advance.

  Kind regards

  Deepak Khari

  Hello

  Use eval(), c.

  
  

  String Var1 = eval ("{{db. Var1.ColumnName}} ")." ToString();

  System.out.println ("scnro_class--->" + Var1);

  
  

  Kind regards

  Dembélé M
  

• HP dv6 backlight on screen doesn't turn on after the "standby mode", although external hdmi does not follow the work

  OK so my sister has been using my computer last night, when it was made using it she just closed it witch automatically put in mode 'sleep' and gave it back to me. later that night I opened this herd all the normal sounds of the laptop but the backlight does not turn. the screen looks completely black, except that I see a darkness where the hp logo lights across the screen in the lower right corner. in fact when I use the scanner of thumb to activate windows I can see the date and time, dimly lit in this corner and can move the mouse on and see. I connected my laptop to my TV via hdmi and it works absolutely fine, which is how I'M writing this issue right now. I tried to update the drivers for my graphics card, but that did nothing. It's just the backlight does not turn no more. is it far from accidentally turn the backlight on or off? If I have to completely replace the monitor or just replace the lighting? any suggestions?

  model: Hp Dv6z

  product: A0V78AAR

  Windows 7 64 bit

  Below is the list of compatible signs:

  part number 665334-001

  15.6-inch high-definition view bright LED display SVA - Raw Panel only

  part number 665335-001

  15.6-inch FHD anti-glare LED display WVA - Raw Panel only

  Here is the Service Guide. See page 93 and 101.

• Tip action DOES not work in the Flash output

  Hello

  I created a module in line with Captivate 9 using an advanced conditional action to display the button at the end of 2 sections.

  The trigger works well in the release of HTML5, but it does not work in the Flash output: users need to go back to the slide with the action advanced a second time in order to show the next button.

  It is the created tip action:

  

  Help, please. Thank you

  Lisa

  Change the order in the updated standard measure jump to slide as last order, or at least after the command of the increment.  The actions are executed in sequence, if you jump first to this slide, where the on enter event is executed, the variable has not yet been incremented. Try to see if it solves the problem. HTML is different from SWF to react (it is converted to JS so that SWF to ACE).

  You post the screenshot of the timeline.

  Moreover, as I have indicated already, I would add continue to the part of the TIME as well as the ELSE part. I learned that, in certain circumstances, a conditional action with that one decision, and no ELSE part does not work well. It is not a problem if you have several decisions.

• Tip action: a conditional action does not execute the final decision

  Hello

  I'm working on a program of Captivate (7). We have a tip action that runs when entering the program or the first screen.

  The program transmits the data of Captivate to a database via Javascript to a .NET application.

  After each of us the registration form that the user saw the screen and assign it to a user variable: v_lastmod = 1, 2, etc. On the way to the next screen, it passes the data to the database via Javascript to a .NET application and .NET passes a redirect response. So it basically loads the program again. Entering the first screen where I have a display "Loading" (just a screen with loading as text), according to your v_lastmod, it climbs to a particular slide. The tip action uses "If" and "else", "if" v_lastmod = 1, jump to "4 slide 4" etc. ".

  We are able to do it for all the decisions that are in advanced actions, until we get to the lastmod = 19 (which is where we stop registration for this variable).

  So, say for example v_lastmod = 19, rather than jumping to the appropriate slide, it goes to the screen first and then stops on the second slide.

  Any thoughts would be appreciated!

  If all goes well, this didn't seem to be confused because I am not developer but program file Captivate .NET.

  Is there a quiz results slide your course?  Is the quiz results slide before slide 35?  In the "quiz properties: success or failure" attempts is in anything other than endless attempts? In "quiz: settings ' is mandatory or optional quiz?

  In order to go beyond the quiz results slide, some of the quiz properties must be defined properly to allow this.

• haveback upward through windowsliveonecare for computer, external hard drive wentdown and now wantto get back to the top but new computer does not recognize the direct care

  drive external upwards using a windows live care, computer went down and now cannot recover save as new computer says it does not recognize backup Installer direct care. How doi recoverbackup on the new computer.
  Thank you
  E-mail address is removed from the privacy *.

  Hello

  Webcam Live One Care is no longer available.

  Please read the information contained in this thread about your problem (Steve Boots information link):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/i-have-uninstalled-OneCare-and-would-like-to/d2d196a5-e46f-4E48-9d94-5c217f758134

  See you soon.

• When I scroll through the mask of image sequence does not follow the layer of the timeline?

  Another problem. I simply scroll the image sequence and you can see on the screenshot that the mask remains where it was in the beginning. I applied red tinted effect (just to show you), and it does not stick to the station when scroller is at the end of the timeline which is say that the mask is not to follow. But it should, because the mask is the image sequence. Why? Please take a look. Maybe there is something wrong with the Ctrl c and Ctrl v method - it's how I inserted my BW mask in the layer mask?

  

  Select the two layers of video group and convert it into object new Dynamics

• The mouse pointer does not follow the new path

  I use an invisible mouse and using a copy of the first slide where the mouse appears to set my position of mouse to the next slides.  My frustration is that while the path of the mouse indicates the correct path (as prescribed by the invisible mouse on the short blade) the mouse on the next slide does not move, it just stays at the final location at the end of the path.  What I am doing wrong?

  I'll give it a try.  I thank very you much for your time.

• Wallpaper does not follow the model of VD

  Hello

  I've got models put in place and working properly, and I got the persistent work and pools set up.  But the office - administrator - on the model is replaced by the default XP landscape image when people log on the VDs.

  I am running XP SP3 and the 'Documents and administrator' is empty.  The "All Users" have all the icons, but not the bottom and not the graphics settings.  If I copy the Administrator profile to all users, I lose all icons and settings and still do not have the background or the graphics settings.

  How can I get the settings in the default - or the profiles of all users so that anyone who connects to one of my VDs will get the default information and enhanced graphics settings?

  Tom and Christoph trying to say here is that you need to copy the profile to the default user profile, and not to some other profile.

  For example, get your vdiuser1 as you like it with your paper painted, etc.

  close the session

  Newspaper with the local administrator or something else that vdiuser1

  Do right click my computer > properties > Advanced tab > user profiles settings > select vdiuser1 > click Copy To > go to c:\docs and settings > click on default user (if you do not see, you must display hidden files/folders > click Ok > click ok to the warning > click ok or close, etc.)

  now, go to documents and settings, and delete vdiuser1

  disconnect from the local administrator

  Log in as vdiuser1. your wallpaper settings / should be there.

• spam does not follow the rules

  Why junk mail circumvents the rules? Is there a way around it?

  I'm getting, daily mail of a spammer, I tried implementing the rules of email and when I click on 'Apply' they work, but when the mail comes, once again, it goes straight to the Junk rather than follow the rule, I put in place.

  You can bypass spam filters and use a 3rd party like application

  SpamSieve.  You can expect 99, 8-99, 9% accuracy that you train the Spam folder.

  Buy one once, the best $ I ever spent and extremely easy to use.

  

• Dynamic masking action does not hide the label - Apex 4

  Hi, does anyone else have this problem? When I create an action to hide/show for several items based on a selection list, on the event to hide the label of my question remains. I know that I can add the items in a region and hide the entire region, but surely, the skin must hide the label of the item as well. Is this a bug?

  Hello

  I see what you mean. There is 1 template in the Optional default 15 ('Label') theme with help that is missing the tag 'label' and 'for' attribute you need. I would like our theme / template that developers. Thanks for reporting this.

  For now, you can move quite easily by changing this model. Add the following code at the beginning of the "definition > before Label' value:"

  And this at the end of the value of the Label 'after ':

  Kind regards
  Anthony.

• Approval task Serial - menu Actions does not contain the option 'Decline' in 11g R2

  Hello world

  I've implemented the approval task series with two steps.

  I defined the policy on the approval of IOM.

  When an application starts, my workflow is executed and request is sent to the first approver box.

  When the first approver open the Inbox, and then click this request, menu Actions has these options:

  Approve the

  Reassign

  Get worse

  Suspend

  Create the subtask

  But there's no option "reject"?

  Why?

  How can I solve this problem?

  Thank you.

  Best regards.

  Click on the application and open the detailed view of the same and see you get option REJECT it.

  Please note that you cannot reject the request without entering comments in the comments section.

  HTH