ToolTip without animation

Similar Questions

• Spider Solitaire without animation after upgrade windows 7

  I tried the posted '' correction '' «try to uninstall and reinstall the games» This does NOT solve my problem.
  Suggestions more than anyone?
  Thank you

  Here's what fixed it for me:

  Go to control Panel\Performance and Tools\Adjust information Visual effects.  I had originally chosen 'Adjust for best results' which disables many Visual effects.  I changed that to "resolve to improve the appearance.  All the animations of Solitare knit.

  See you soon!

  John

• Disable the Animation of the action bar while hiding

  BB10 photos Soft mask the action bar when you tap on the screen. When you do so, the action bar disappears immediately.

  In an application of Cascades, if you:

  Page-> setActionBarVisibility (ChromeVisibility::Hidden);

  ... the action bar to slide down until it is no longer visible.

  I would like to disable this animation, but I don't know how. For the standard controls, I do things like:

  ratingControl-> setImplicitLayoutAnimationsEnabled (false);

  ImplicitAnimationController = allDisabled
  ImplicitAnimationController::create (ratingControl)
  . Enabled (false);

  ... but I'm not familiar with a way to get a reference to the action bar itself, or how, independently of any reference to disable animation.

  Thank you
  Daniel

  Hi Daniel,.

  If you switch between hidden and visibility for the ActionBar overlay it will appear/disappear without animation. Overlay, that's what the photos app uses so the image should not resize when the ActionBar toggle visibility.

• Can't disable label refocusing animations?

  I have several Labels centered on the screen and I regularly change the text of each of them.  When the new text is a different length than the previous text, the label starts on foot with the left side of the text in the same position and then it moves to the left or right to center the new text.  The problem is I want to change to happen immediately before the new text is displayed even rather than being animated.  Is it possible to disable the implicit animations for this?  I tried several different ways and have been unable to do.  I need to solve this problem that since I use other animations on the labels (to move vertically) but this question is shaking around and it seems not smooth

  Hello

  I tried this code and it changed the label instantly, without animation:

  import bb.cascades 1.0
  
  Page
  {
      Container
      {
          Label {
              id: l
              text: "Test short"
              attachedObjects: [
                  ImplicitAnimationController {
                      enabled: false
                  }
              ]
          }
          Button {
              text: "Hit me!"
              onClicked: {
                  l.visible = false;
                  l.text = "Test looooooooooong";
                  l.visible = true;
              }
          }
      }
  }
  

• animations of solitaire

  I have Windows 7 and Solitaire and Spider Solitaire work, but without Animations.  "Display Animations" on the options screen is grayed out.  How can I restore Animations?

  [Moved from comments]

  See if this post will help you

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/Spider-Solitaire-has-no-animation/960455b3-0a6e-4AD0-9E97-14b4e7edef22

• Change the value of all the keyframes (Animation-tween)

  Hello

  There is the posibility to change a value in all selected keyframes?

  I have two boxes:

  Left with a rotation animation,

  Right with animation of position.

  I know with the white arrow, I can select the 'path' and change the position.

  But how can I change the position of an object without animation of position?

  Thank you!

  

  I don't really understand what you're showing. In your layer of mc-Hello, I see four key frames. When you first highlight the 'Hello' layer shows a zoom with no change in position effect. You try to move the 'Hello' zooms in from the central location to the upper right corner?

  If that's what you want to achieve, you must select all instances of edits to move the entire animation. A simple way to do it is to slide the selection around the entire animation tool once you select Edit several images. The way you select in your example, you are only selecting one instance to a keyframe and spend only one.

• Copy and paste an animation not. GIF in photo... How?

  OK, I'm about to pull out all my hair and jump from a tall building! (just kidding, sorta)  I tried and tried to figure this out, but the answer escapes me so, here I am.  I want to take one without animation. GIF (see below) and paste it into another picture.  As you can see, it dose not have a projection of the canvas and I want to keep it like that.  I don't understand why copy/paste is so hidden in photoshop CC but it is or I'm just blind.  My thought is that I SHOULD be able to open 2 photo and copy/past 1 photo in the other and be done! (simple)  I know how to select an area of a photo and then paste to the other, but a simple copy/past of one picture in the other is an aggravating mystery.  Thanks for any help you guys can provide.

  
  

  
  

  

  You can post a screenshot? It is his strange. The screen shot with the move selected tool.

• working with layers of animation in CC open psd file so that the layers appear as frames?

  I recently got Photoshop CC and work on animations with limited success, I'll open a psd file and sometimes it will open with the layers as frames and other times not I can put the layers in the timeline one at a time but it is very time consuming that some files are 100 or more layers I'll open the file and it will take only a layer of the timeline when I convert to video editing I'm going to drag the layers up to the first line, but when I go back to the timeline, all are invisible except for the first image I know that it's probably something obvious, but I can't understand it.

  PSD file have been save with aura image Animations Frames in an animation image in the timeline panel.  PSD have been saved without animation image and aura created video or animation of an image or a video in the timeline palette.

  You can create a picture Animation timeline or video for layers Document has nothing in the editing Palette panel.  If you create an image Photoshop Animation can make frame for all the layers quickly and easily.  Create the Animation of the image by clicking on the animation of the image to create in the palette of the timeline. Which will create a single image in the animation of the image. Use the drop-frame animation Palette, then click on branding point layers. An image for each layer will create it in the document.  If the frames are in the wrong order three is in the same menu drop-down to change their order.   There is also an element that will make any new added layers are visible on all frames.  You can also have Photoshop generate tween two frames with the interpolation point.

  Here is an animation of image that I created with two layers that are visible in all frames.  A layer of layer mask.  I created two frames. The first and last frames where I changed the position of the layers which has the layer mask in both frameworks.  Then I had Photoshop generated all the other frames between the first and the last images.

  

• Animations of InDesign in 'Folio '.

  Hi, I have a problem with the animations that I created in IndesignCS5.5. I created a new document for Ipad (1024 x 768 pixels) of two pages. If I look at the animation in Indesign works very well for both pages and if I publish my document as a folio for Adobe Content Viewer can not see the animation, but only two static images without animations.

  I've never used IndesignCS5.5 for animations and never exported to the Folio.

  I imported all my png files that I needed in Indesign, and then I applied a few animations to a few PNG. I don't know if this is the correct procedure.

  Can you help me? How can I see the animations in Adobe Content Viewer?

  Thanks for the help!

  InDesign animations are not supported in DPS. Use any Adobe Edge

  form of animation of HTML 5.

• Animations Flash of DPS are triggered too early...

  Hello..

  I'm building a small "DPS-brochure" in InDesign, use of the Foilo generator.

  I've done a few animations-flash (web-content-overlays), which are auto-déclenchées when you enter a page.

  Everything works fine, except for one small - but important: part.

  The first animation on page 1 film works very well. But when drag page 2, animation shild is already triggered... Sliding fast back to page one and then quickly to page 2, I can see the last part of the animation... It seems that the animation of triggers Animation 1 2...

  The strange thing is that when you place an article without animation, between the two, everything works a charm...

  Do you have ideas of how to solve the problem...?

  All animations must be set to play with a second delai.125.

• ToolTip: destroyer of layout

  Hello!
  
  I am trying to create a mosaic of cells of Customs (simple rectangles) without any gap, but when I add a ToolTip to each cell, it appears a gap.
  I guess that's because the layout considers the size of the ToolTip and the total width/height is the combination of (cell and ToolTip).
  Of couse, that destroys the visual appearance of the tile, adding the gaps between the cells.
  
  Here is the code:
  

  import javafx.stage.Stage;
  import javafx.scene.Scene;
  import javafx.scene.paint.Color;
  import javafx.scene.input.MouseEvent;
  import javafx.scene.CustomNode;
  import javafx.scene.Node;
  import javafx.scene.shape.Rectangle;
  import javafx.scene.layout.Tile;
  import javafx.scene.Group;
  import javafx.scene.control.Tooltip;
  
  class Cell extends CustomNode{
  
      var tooltip: Tooltip = Tooltip{ text: "Cell Description" };
  
      public override function create(): Node{
  
          Group{ content: [
              Rectangle {
                  width: 50, height: 50
                  fill: Color.GREEN
                  stroke: Color.BLACK
              },
              tooltip
              ]
  
              override var onMouseEntered = function (e:MouseEvent): Void {
                  tooltip.activate();
              }
              override var onMouseExited = function (e:MouseEvent): Void {
                  tooltip.deactivate();
              }
          }
      }
  }
  
  
  Stage {
      title: "MyApp"
      scene: Scene {
          width: 200
          height: 300
          content: [
  
            Tile {
              columns: 3
              content: for(i in [0..8]) Cell{};
            }
  
          ]
      }
  }

  Furthermore, I put 3 columns in the tile. It seems that two. : S
  
  What can I do to use the ToolTip without deforming the provision?
  
  Thank you!!

  Change the visible attribute to false because visible and activate() are contradictory.

   var tooltip: Tooltip = Tooltip{visible:false  text: "Cell Description" };
  

• Animation area in a button, is it possible?

  Hi!, I was wondering if a button this is posible:

  I have a button of 800x800px within a 800 x 800 in scene, state high only 200px button are visible, the other 600px remains off stage, more State is a clip with spring animation which brings the button to the left for an area visible from 600 pixels (although now only 200px are left out of the scene). the low State is very the same as most (without animation, so no change in size at all).

  The problem here is how I set my key zone: if I put it to the size of the top condition then the button work the way it is supposed to work but if I move the i just smile a little to the left (just out of the affected area, don't forget, the same size as the high State) then is not considered the most so I come back to my initial 200px button of the State. From elsewhere if I put the affected area to match the size of the button once she completed it animation on State flown over (600px visible button) I solve this problem, but then I click the button even when I am out of the State SUCCESSION.

  It is possible to place a movie clip inside the affected area so that she always mach the motion of the clip within the State?

  Explain to me better here is the site I work in: http://matriuska.iblogger.org/

  It is a first prototype of the site, but you'll see what I mean, my buttons are numbered tabs, when you hover over here you'll see that they are alive, but I intend to make this animation much more exaggerated and is then when the problem come...

  I'm still not a problem.

  don't assign it a hitarea.  assign a reversal/deployment to 01, 02 etc.

• Random position at specific animation

  Hi all

  I want to distribute multiple layers in the Z axis and on a specific time to animate '0' point. I managed to distribute them randomly and place them '0' point in a given time, but without animation... He just 'jumps' to '0'. That's what I used:

  seedRandom (18, true);
  z = random (400, -400);

  If (time > 12) z = 0;
  [z]

  I know I lack something... advice?

  Thank you

  Like this perhaps?

  moveStart = 12;
  moveDuration = 1;
  seedRandom (18, true);
  z = linear (time, moveStart, moveStart + moveDuration, random (400-400), 0);
  [value [0], value [1], z]

  Dan

• Very new and stuck with animation Movie Clip layer

  I'm very new to Flash (CS4) and after searching a solution to a loop layer, I understand better that by creating a new Clip and animation to be done here.

  I did this and then put the Clip in a layer on the stage... but it won't play at all. It is as I put just the symbol that presents in frame 1 of the Clip and it remains static.

  What Miss me?

  First of all, when you run the movie in Flash (the Publisher) itself, then the animations will not work. 'Enter' will be displayed without animation. You must export the movie (CTRL + enter) or menu: control > test movie. If this is not the cause of the problem, how many images does your film? How many pictures does the layer where you put the animation on? Try to add enough frames. Use a new layer without keyframes and use it for all the animations that should loop. If these animations should run asynchronous, then add a layer for each animation and let them from a keyframe.

• Manipulate the y-axis of ToolTip integrated?

  Hi all
  
  ... Is quick question there a way to manipulate the position of the y-axis of a ToolTip without using a custom ToolTip? For example, I have an image that has the ToolTip builtin uses and I need to have it appear above the image.
  
  I have a series of images, side by side, at the bottom right of my screen... when a user points to one of the images, because they are already grounded at the bottom right, the ToolTip appears and images covers the user must really pay attention to the text to achieve an image that they are clicking.
  
  < mx:Image id = "cascadePic" source = "{cascadeBtn}" buttonMode = "true" click = "cascadeWindows ()" red = "0" right = "70" = toolTip "click to reorder your widgets staggered one above the other..." / > "
  
  I'm trying to see if there's an easy way to deal with this, without having to dig into the custom tooltips.
  
  Appreciate the help!
  Adrian

  Nope. If you want to move the ToolTip, tou do Currenttooltip:

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=tooltips_4.html

  If this post answers your question or assistance, please mark it as such.