Unable to apply security restrictions on creating pages templates and page extraction when using password restricted security in acrobat DC

Similar Questions

• my daughter has created another account and does'nt remember the password would close the account else completely off cannot figure out how to do it please help

  Please help me understand this

  You can change your password to something that you remember another administrative user account. If you had only an administrative user account and you have forgotten the password, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• How to create a template and merge with content existing?

  I need to create a template in pdf format, which will have the header and footer. And I have a set of pdf files, which only contained.

  Is there a way to create a model and then merge this template with the content that I have? Use Acrobat Pro DC.

  Yes, you can use an Action to process files and add the "template" as a background to each of them.

• ESX 4.0 not what allows us to create the template and clone

  I recently installed ESX 4.0, but I don't get the option to create a model or a clone

  thread moved to vCenter community.

  Models of clones are characteristic of the vCenter. There are ways to create clones without using vCenter, but to create a template, you will need to vCenter.

• Missing an option "Open" in the download dialog in page ADF when used in IE 11

  Hello
  I have an ADF page with download function. In IE 9, when I click on the download option it shows me under dialogue.

  

  When I click on the same link in IE 11, I see not 'Open' option.

  

  I use jdev 11.1.1.7.0 with the patch patch 18277370, to support IE11.

  Can someone help me with this problem?

  Thank you.

  I am able to solve the problem by setting the file name in the header respose.  According to the forums IE11, security levels are enhannced in it, and they expect the header contains the information of the file.

  Add this line, file name with extension

  response.setHeader ("Content-Disposition", "attachment; filename = "+ file name)."

  After you add it, the file name is displayed correctly and 'opens' option is available in the dialog box.

  Thank you.

• I'm doing my digitized and searchable PDF file using the PDF/a format Acrobat Pro XI... visiting version 8 of Acrobat there is an option available for simultaneous use to make available with OCR, but here in XI'AN, I am unable to do

  I'm doing my scanned PDF file and searchable using which makes the PDF/A format in Acrobat Pro XI in version 8 of Acrobat, there is an option available for use to make available with OCR, but here in XI'AN, I am unable to do it at the same time... Please help me to find the same.

  XI of Acrobat Pro, you can use the wizard for this Action.

• Unable to connect to the server on Money 2006 and have not changed the password

  Money 2006 can not connect.  The server is down?  I have not changed my passwd.  Help!

  Original title: Money 2006 cannot connect. The server is down. I have not changed my passwd. Can you help me

  Money 2006 can not connect.  The server is down?  I have not changed my passwd.  Help!

  Hey oldturkeyhunter

  you will get the best support if repost you in the forum of money microsoft specific to the link below

  Use this forum to discuss Microsoft Money. This includes money, more and more older versions.

  http://social.Microsoft.com/forums/en/money/threads

  Walter, the time zone traveller

• Cannot create color RGB - automatically turn darker when used - help?

  I recently changed my color settings because I thought I was staring at another paper it turns out I was wrong.

  Now on each new document that I opened the RGB colors to turn dark, I don't know which is the correct color profile?

  Documents registered before that this situation has changed all the colors are bright and always correct.

  Help?

  Select the image with the dull color version and open the color Panel menu display (not the color picker). It shows the color as RGB or CMYK?

  It seems that when you use the color picker, your cursor is in one of the CMYK fields and you get a CMYK color.

  

• ERROR when you try to see pages created with workflow create page

  Greetings
  
  I developed a WebCenter Application that uses the security of the ADF with forms authentication. This app has
  two JSPX is one the login page and the second is the page where I managed runtime created pages
  using the workflow to CREATE a PAGE and a tree itarator page to see my created pages.
  
  When I deploy application on weblogic Server I am able to connect successfully and create as many pages as
  I want and also see them using the generated link. the problem is that when a removal of the application of the weblogic
  Server, I want to tell the deployed application, and then redeploy the application even on the server, I can log in again and
  See the pages I created before, but when I try to reach them I get this error showed in my internet browser:
  
  Error 401 - non authorized
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.2 401 unauthorized
  
  The request requires user authentication. It MUST contain a header field (section 14.46) WWW-Authenticate
  containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable authorization
  header field (section 14.8). If demand already includes of the authorization credentials, then the 401 response indicates that
  These credentials for authorization was refused. If the 401 response contains the same challenge as the previous answer,
  the user agent has already attempted once authentication, then the user SHOULD be presented the entity that was
  data in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained
  in article 11.
  
  What kind of configuration is missing or me what is happening?
  
  Thanks for your help

  I see a problem here (no jazn-"Data.xml").

  When you create pages using the task flow page information go to MDS but security information are always of jazn - addedd "Data.xml". MDS is retained, but jazn-"Data.xml" is published again when you deploy the application.

  Basically, you need a way to control jazn-"Data.xml".

  Fortunately, there is a way!

  When you deploy in the EAR indeployment profile you have an option 'Security Deployment Options' uncheck 'decide that to replace... ". »

  But this approach won't work on when redeployment. Will not work when the cancellation of the deployment and deployment.

  Vincent

• Unable to set the title of the page to the pages generated by using a template

  I can't assign unique page for individual pages titles, created from a template. I started with a "model" DW CS4 CSS page, modified and created my pages like this. Now, I can not access the ticker symbol on the individual pages - it is grayed - out and the page template is the only one that will allow me to make this change.

  The last site I created, I used a model and has been able to do this but that was using CS3. Thank you.

  It is the sign of a bad model.

  This do-

  Create a new page (basic HTML).

  Use the FILE | Save as template...

  Look at the code in the head region of the page, in particular the editable

  the region around the

• Good way to create templates and to only deploy - "no problem of Internet access.

  I'm new to ESX and I have tons of networking with VM issues, I am deploying to a model.  Can someone tell me if I do something wrong?

  We use

  vSphere Client 4.1.0

  vCenter Server 4.1.0 build 345043

  It is a brand new installation of W2k8 32-bit and w2k8 R2 SP1.  The machines work fine when I create them from a CD.  When I turn them into one model and "Deploy Virtual Machine this model" is when things go wrong, all the machines I have deploy have network problems.

  That's what I do

  • Install VMWare tools v 8.3.7 build 341836
  • Apply all updates from MS-based VM
  • I have check them as a model
  • Deploy the virtual machine for this model
  • Give it a name
  • Choose the customiztion comments-> customize using the Customization Wizard
  • Use the virtual machine under the name of the computer
  • Give him the windows license product key
  • Give him a password
  • set the time zone
  • Nothing in the race once
  • Network - default settings
  • Task force - task force
  • Where is the operating system-> options I check 'generate new security IDS (SIDS).
  • Save the specification - I can't verify anything here, but I wish I could
  • Finishing
  When that it deploys, the deployed machine gets and IP address, but it is usually said "local only" and it cannot access to the internet or other computers in the environment.
  I can click on the x next to the internet and start the Windows Network Diagnostics and when it ends says:
  "Your computer seems to be configured correctly, but the device or resource (primary DNS server) does not.
  I have disabled the firewall, enabled the firewall, deleted from the virtual network card, changed nic types (currently using the vmxnet3), tried all the tricks in the book that I can find on google and nothing works.
  I got a machine deployed and run sysprep after the fact and that did not help anything.  I may be wrong but I think that sysprep is not necessary if you use the Customizing of comments, is that a correct assumption?
  I created and XP VM and created a template out of it, when I see him, networking is fine.
  Thanks in advance for any help you can provide.

  I think you're right, it looks like a problem with the switchport configuration.

• Programmatically create ADF Table and binding.

  Hello

  I create the table and the columns programmatically using richeTableau and RichColumn. But unable to fill in the data in the table cells.

  Here is an excerpt of the code used. I followed the specified discussion ADF of Create Table by program. but I am not able to work.kindly suggest to solve this problem.

  RicheTableau tblObj = new RichTable();

  TableValues = (ArrayList) getCompValue (wsValues, compId) list;  contains a list of the HashMap object.

  tblObj.setVar ("trow");

  tblObj.setId ("tblDBrd");

  for (int k = 0; k < tblColumns.length; k ++) {/ / tblColumns contains a list of name of column to display in the table}

  RichColumn tblColumn = new RichColumn();

  tblColumn.setVisible (true);

  tblColumn.setId ("col" + k);

  tblColumn.setHeaderText (tblColumns [k]);

  UI RichOutputText = new RichOutputText();

  ui.setId (compId + k);

  "{[String expression =" #{row [] "+ k +"] ['"+ tblColumns [k] +"] ' ']} ";   want to retrieve the value of #{rank [k] [columnname]}

  ui.setValueExpression ("value", getValueExpression (expression));

  addComponent (tblObj, tblColumn);

  addComponent (tblColumn, ui);

  }

  tableModel = new SortableModel (tableValues);

  tblObj.setValueExpression ("value", getValueExpression("#{backingBeanScope.dashboardBean.tableModel}"));

  Thanks in advance.

  Best regards

  Arun

  You need the table setValue. Take a look at these discussions: programmatically set another link to Table read-only ADF and http://stackoverflow.com/questions/22389813/change-the-displayed-value-in-adf-table to get a few first thoughts and feel free to come back if you get stuck somewhere.

• Button state created the Master page properties not applying does not at all pages

  When I create a button and add a hyperlink to this button on my main page, the hyperlink properties do not apply to all other pages.  So when I test my Web site and click on the 'Services' button, it will take me to the page "Services".  However, since the 'Services' page the other buttons do not work.  Technically, they must work because EVERYTHING is created on the main page should apply to all pages, including linking them.  Is there a bug in the function?

  Hello

  This problem is usually caused when objects are located above the Navigation bar, so that you are unable to click on it.

  To resolve the issue:

  (1) open the master page with Muse

  (2) create a new layer using the layers panel

  (3) move the navigation bar at this new layer: select the navigation bar, click with the right button on it > go to layer

  4) to ensure that this new layer is on top

  It may be useful

  Sonam

• Is it necessary to create additional rules not permitted for uses such as Regedit.exe etc when applying software restriction policy?

  Is it necessary to create additional rules not permitted for uses such as Regedit.exe etc when applying software restriction policy?

  Hello

  Please visit the following link. This should explain the software restriction policies in detail.

  http://TechNet.Microsoft.com/en-us/library/bb457006.aspx

• I document for which the security of the document does not allow me to assemble documents, copy of content, page extraction, form filling, signature &amp; creating the model. Buy adobe acrobat won't solve all?

  I document for which the security of the document does not allow me to assemble documents, copy of content, page extraction, form filling, signature & creating the model. Buy adobe acrobat won't solve all?

  The result is that Adobe does not provide any software to defeat the security of a PDF file. If the creator of the PDF file set to this level of security, intentionally or not, that's what it is! The solution to your problem is to go to the creator of the document and ask the password or an unprotected PDF file version.

  -Dov