Under certain conditions (by program) make MessageCheckBox read-only for the specific rows in a table

Similar Questions

• How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  Hello Jmbtexas4,

  By default, you will need to individually click on the fields of the form and check the 'read only' and save it. From now on, it is not possible to select all together and make the changes.

  -Usman

• Impossible to change an attribute of read-only for the My Documents folder in Windows 8

  Problem:

  Everything I put in My Documents directory is converted into read-only, so all my files in this folder (especially my PDFs) cannot be opened OR downloaded/sent online. I tried to use cmd and Type attrib - r "c:\users\myaccountfoldername\documents" but nothing works, document folder still has that little padlock on its icon. I also gave everyone full access to this folder, but whatever I do, I can't change the property "read only". Even if I uncheck that manually in the properties, it continues to go back.

  I looked for a solution now and I still have solved it. I ignore it if I could, but I put a lot of important and frequently accessed files in my library of Documents, so I really need to get this figured out soon.

  I just bought this laptop about a week ago, it came with Windows 8. I'm not sure but I think that this problem happened to me when I joined the homegroup on my local network and began to share files so that I can transfer my old files from my old laptop.

  With this in mind, I tried also to leave the homegroup and restart. The Documents folder was read-only a minute or two after I restarted, but then it became like this again after some time.

  I know that it was designed for the safety of my files and everything, but what should I do with my 'secure' files, if I can't even open a simple PDF file?
  I am the administrator and the user account only on this laptop

  Platform:
  64-bit Windows 8
  Path in question:
  C:\Users\USERNAME\Documents

  I finally understood what was causing the problem! Apparently, he was in the Service of protection against theft by MacAfee (that I installed immediately after the purchase of my new laptop) encrypt all the files in the Documents folder and all the office files that I have! Which explains why no matter how many times I try to seize or delete and redo the folder my documents, it simply would not work. I finally uninstalled the hassle of a service and I can now access my files again :)

• Creating a table fixed adf read-only for the month

  Hello world

  I was wondering if it would be possible to create a table read-only horizontal adf fixed with the months of the year. I am pretending to do is the following:

  Jan Feb March April May June

  Jul there are seven Oct Nov Dec

  Really, it isn't serious me if I create the table by hand or the month comes from a table in a database, but is it possible? How would you do it?

  I really tried to do, I tried foreach, a table, I tried to browse but I couldn't do it.

  Any help or ideas from anyone? How can you do a foreach statement and 'divide' table of the adf two?

  The example I want to achieve with this idea: https://www.dropbox.com/s/w03nyuizkzgyq21/Capture.PNG

  I use Jdeveloper 12.1.2.0.0.

  Kind regards

  Frederico.

  The attributes of need 6 vo and two lines to get your page layout. First line contains jan-June and the 2nd row from July to December...

  Or you use a panlelGridLayout with two rows one 6 cells and set each throttle in its own cell. Looks like a table but is not a.

  Timo

• Is there a version of photoshop read-only for the non-concepteurs?

  Hello, I'm not a creator but need to examine file .psd for comment. Where can I download a "reader" who works under mac os x 10.6.8 Photoshop?

  Application overview should read psd files, unless you want a special function.

  Same Safari will be display.

• Define a field read-only under certain conditions in the table of the ADF

  Hi friends,
  I'm new to ADF. I created a page basic jsf and display of data from the countries in the table. I also have the createInsert and validation on the page buttons. When I click on create to insert a new record is created, and I am able to enter and save it with success. However, I want the records already entered to be read-only.
  
  Essentially, I want the user to enter details only by inserting the new record. Existing records or registered once newly created records should not be editable. I tried some things in the expression builder of the attribute read-only for the field, but this deos not work. Can anyone help me please with this.
  
  Thank you

  Using ADF BC?
  If so, check http://mjabr.wordpress.com/2011/07/15/control-row-updatability-part-2/

• Convert editable PDF read-only when the Envoy in an email - JavaScript

  I have a real estate company that is trying to have an application that an agent and the customer can fill in the necessary information, press "submit" button, have the javascript code to compose an email with the attached pdf file.  Here's the question I'm having: I need to be able to convert the editable PDF reading only so that when the client receives a copy that they can not change the information again.

  Here is my code for the Send button javascript:

  It's the return of form e-mail. It is hardcoded

  to make the form comes back to the same address.

  Change of address on your form to match the code below

  Email business

  var cToAddr = " " [email protected] "; "

  First of all, download the customer email CC

  var cCCAddr = this.getField("1st_Tenant_Email").value;

  If (cCCAddr! = "")

  Download now the second email only if it is filled

  var cBenAddr = this.getField("2nd_Tenant_Email").value;

  If (cBenAddr! = "")

  Get now the third E-mail only if it is filled

  var cthirdAddr = this.getField("3rd_Tenant_Email").value;

  If (cthirdAddr! = "")

  Set text object and the body of the e-mail message

  var cSubLine = 'Test - form of contract '.

  var cbody = "thank you for submitting your form. \n' + 'save the attachment of the completed form for your records.

  Send the PDF as an attachment to an e-mail

  this.mailDoc ({bUI: true, cTo: cToAddr, cCc: (cCCAddr + ";")})

  (+_cBenAddr_+_";"_+_cthirdAddr), bassujetti: cSubLine, CMSG: cbody});

  I found a work around because I didn't buy something else. I changed the digital signature so that once it has been signed, it would turn into read-only except for the Send button. With the button send, I used the code above to submit the pdf now read-only for the company by e-mail and cc tenants.  I hope this will help others also.

• imaqReadAVIFrame retrieves the empty image under certain conditions?

  Hello

  I'm having a problem where imaqReadAVIFrame (.) is the white recovery (all black images) under certain conditions.  The conditions seem to be when the height of the AVI file is equal to or greater than the width and the height is an odd number.  AVI files created by using the various AVI NI Vision (IMAQ 4.6.1, IMAQdx 4.6.1) functions in an application created in CVI 2012 on a computer running Windows 7 64 bit.  AVI files use MJPEG compressor, and they play back fine in an external program like VLC or Windows Media Player.  Any ideas on what this could be?  My solution for now is to not to allow the creation of AVI files where the height is odd and equal to or greater than the width that is not a boring restriction, but it seems like there's something weird happens with imaqReadAVIFrame().  I can provide some AVI files if necessary, but they are 16 + MB each.

  TStanley,

  I managed to reproduce what you see with your .avi files in a program I wrote.  I built a LabVIEW program that creates an AVI file which can be saved to memory and then uses code from the example finder to read who created the file.  I build the file to your specifications at the height is greater than the width, and the height being an odd number of pixels.  Something interesting about this, however, is that it seems to be a point where an odd height is acceptable.  Once you go below the height of 291 pixels, any odd height then works.  The files that I used are written as read in LabVIEW, but that the configuration should be irrelevant because we are seeing the same issue.  In addition, LabVIEW and LabWindows CVI calling the same dll to actually set up the code.

  In this, I think this question arises from the nature of the way you compress the. AVI file.  If you are interested to read a bit more about it, a useful link can be found here:

  http://www.manifest-tech.com/media_pc/avi_formats.htm

  However, what I think is happening, is it that MJPEG file compression format translates into creating files that cannot be read by our software unless the height in pixels is a multiple of 2 or the size of the file is below a certain limit.  To fix that, there is a simple solution. Compress the file with any of the other compression methods available (DV video, Cinepak Codec, codec Intel IYUV, Microsoft RLE, Microsoft Video) and you will be able to open the file without the black screen.  This worked for me and should solve all your problems.  I hope this gives you a bit of insight.

  Kind regards

  Keith M

  Technical sales engineer

• Under certain conditions allow a Feedback

  We use integrated installation of APEX flow back. We love this feature but, we will only use it in development. Is that anyway, apart from the use of JavaScript to hide or remove the link, we can have this under certain conditions depending on the environment in which the application is running?

  I know we can go turn off in the properties of the Application, but we have a ton of environments and having to manually press this switch whenever get us a new version of the application becomes tedious. I expect something more by program / data driven. For example, is it possible to return this switch integrated with PL/SQL?

  Thank you

  -Joe

  Create a compilation Option. In the development environment has defined the status on Includeand by default on export to exclude.

  Apply the Option to build on the entry page and the navigation bar of your comments. When the application is imported into a different environment the comments link and the page will not be returned.

• Under certain conditions create script

  Hi, I want to put a redirect code in my stsytem to help, it is possible to build under certain conditions one < script type = "text/javascript" > tag?

  Any help would be great appricieated

  oooo and meta tags as well!

  You are wanting to add a Javascript within a topic and then conditionalise it so it appears only in some outings? If so, check out this part of the aid for the addition of scripts. Once it is in, you should be able to add a tag of conditional compilation to exclude required results.

  I'm not sure you can conditionalise however meta tags. Maybe if you elaborate a bit on what you're trying to reach.

• How can I add a page under certain conditions?

  Hello

  I'm trying to find a way to add a page to my form under certain conditions. I tried to create this sequel to 'action', but failed to locate the correct action.

  To sum up, I am trying to add a separate page to my existing form with instructions when a specific check box is selected. The separate page is text only and does not form any entries/field. Is there a relatively simple way to accomplish this task?

  You can enter the code in the script editor. If you do not show you can get it by pressing on (on PC) Ctrl + Shift + F5.

• Completely make a read-only folder?

  Not just make a folder read-only, but making it so that nobody can make a change and feel that changes without saving it in a word sound, completely making it read-only. The contents of folder and that's it.

  Thanks for the comments, but my supervisor said they want the files to remain in the format they have. There is also an entire folder not only a couple of files. He wants everything to protect without changing the way the documents are now. Any thoughts?

  Hi Carlton,

  I suggest you try to influence policy from the file by changing the permission to this subject, but I doubt it will work because for all I know, the rights management services active directory has the ability to change the rights of a certain file/document, but please try it

  First, right-click on a document, and then choose Properties. In properties, go to the sharing tab. Click the user you want to change the permissions on a document. the reading selection. When you are finished, click share

  Then right-click on the file and then go to the Security tab, under the Security tab click on the user you want to change permissions. Check the read checkbox and uncheck the others. When you're done click apply then ok

  

• Possible to make an element editable for some users and read-only for others

  Is it possible to make an element editable for some users and read only for others?
  
  I was able to achieve by catches of the select statement that I used to define an authorization scheme, placing in the State of read-only element. However, I would simply refer to the authorization scheme to use caching and to help keep things cleaner for future maintenance.
  
  Is it possible for a system of authorisation under a condition similar to the way point another element can be referenced by preceding with two reference points (e.g.: P1_First_Name)?

  I accomplished this in one of my applications by setting the value of a hidden Page 0 item on connect, for example P0_ACCESS_PRIVILIGES, and then use the feature 'Read only' integrated into the APEX for each article that I don't read for some users check the value of this element.

• Make a read-only form in fillable

  I have a form that has mysteriously become unalterable.  I know I can go through field by field and uncheck "read only".  However, I am faced with forms of insurance that have lots of fields and I was wondering if I can change a setting for the document, or should I go through each field individually to achieve?  I ask because clearly someone didn't cross and render each field read-only.  The form is to be completed recently.

  You can select several fields at the same time and press enter/return to bring up the field properties dialog, or you can use a script to loop through the entire field and set the readonly property to:

  Script button (mouse), link, bookmark, or a JavaScript console

  for (var i = 0; i)< numfields;="" i++)="">

  var fName = getNthFieldName (i);

  Make the field not readonly

  getField (fName) .readonly = false;

  }

  But the fields do not get the value of readonly for no reason. It is difficult to say what caused this without looking at the file.

• How to make text read-only once it is recorded and distributed on the ground?

  How to make a read-only text field after it is registered adistributed d?

  LiveCycle Designer ARE 8.2

  Exit this JavaScript code on the event:

  textField1.access = "readOnly";

  This works after the user loses the focus on the field, but after it is saved and distributed, this field is no longer "read only".

  I need to have staff insert information into a text field and try it then distribute to clients, and these fields must be protected.

  How do you do that?

  No... .it has to be there to be a schema valid... but it is not used by the product offline.

  Paul