Urgent aid reduction in size and maintain a police during the transfer of ppt to pdf

Similar Questions

• NB100 restarts during the transfer of files and others

  Hi, there are some problems, I've had this days with my NB100:

  (1) blocking during the transfer of file with scp-online HW reboot. Seems to be a bug in driver wifi...
  (2) no way to restore my system after hibernation-online HW restart
  (3) Toshiba function auto zoom turned on sometimes when I come back just when the screen saver starts.

  In any case, it's a good NetBook, and it's really nice to see that ubuntu pre-installed on a Toshiba computer.

  Hello

  I noticed that Toshiba has offered some BIOS updates for similar problems.
  Have you checked Toshiba support page on the BIOS update?

• Warning message to turn off "Are you sure that you want to copy this file/folder without its properties" message during the transfer of files and folders on network file servers? »

  Original title: Annoying message of loss of property

  Win7pro x 64 here.

  Is there a way to disable this annoying message "Are you sure you want to copy this file/folder without its properties" during the transfer of files and folders in all of network file servers?

  Pokermon salvation,

  It would be better if post you this question in the forum category below where this problem is related to Windows server 2003.

  Windows Server forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  If all goes well, they will be able to solve this problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• With the help of the network location and mapped a drive to the server FTP. during the transfer of very large amounts of the login information is always lost.

  With the help of the network location and mapped a drive to the server FTP off site; during the transfer of very large amounts of the login information is always lost.  Computer power settings are configured to not to do no matter what, I'm assuming that the ftp server can publish a scenerio timeout but is there a way for my computer and windows to restart the file transfer?

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with networking on the FTP server.

  The question you posted would be better suited in the Technet Forums. I would post the query in the link below.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• My 8 window is not updated and updates are appearing during the verification of updates.

  Original title: updates

  my 8 window is not updated and updates are appearing during the verification of updates

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

• Muse is changing some text and images to white during the download of FTP

  Muse is changing some text and images to white during the download of FTP.  I tried to delete and re-create these assets, but still their changed to white... and I have a white background, so it seems as if it is not yet here.

  Hi Michael,

  Please share your Muse file with us for assistance.

  Please download on creative cloud or dropbox and share the download link with me in a private message.

  Kind regards

  Akshay

• I had to order Photoshop Elements - and choose Mac, but during the next steps, he switched to Windows. It must be possible to return to Mac, - how? I have not downloaded the program.

  I had to order Photoshop Elements - and choose Mac, but during the next steps, he switched to Windows. It must be possible to return to Mac, - how? I have not downloaded the program.

  you need a mac serial number.  If you have received

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• the window on my computer does not return to its original size and I can't use the max and min and exit button

  my window is too far to the right and ive tried to get to the original size and it will until a certain point to the left. This leaves me unable to use the max and min and exit tabs

  Hello

  1. What is the brand and model of the computer?

  2. is it a laptop or a desktop computer?

  3. the problem occurs after leaving the game or program?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  If this happens when you leave a game, I suggest you to follow the steps mentioned in the link and check.

  Open the troubleshooter of display quality

  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  Method 2:

  I also suggest you go through the steps mentioned in the link and the Coachman.

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Method 3:

  Step 1:

  I also suggest you to check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  You can also check if the problem persists in a clean boot state.

  Clean boot:

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 article to start the computer to a normal startup.

  Hope this helps and keep us posted.

• After transformation of HFM app EPMA, account and custom associations lost during the conversion to the members shared

  Hi all

  After I turned my request from the classic to the EPMA, and I try to spend my room size to shared, my medata loses the associations between the account and the customs, and I'm not able to fix it.

  Where can I find the exact measurements how to avoid this problem?    I right click on the dimensions one at a time, starting with account and selecting 'Dimension of sharing. "

  Subsequently I can't create ownership of the account CustomTop member associations in the custom dimension. I built test applications and tried several times and it fails every time.

  If someone has done this successfully could you please share your wisdom?

  Thank you
  Mark Smith

  Hi Mark,

  I faced the same problem.

  I realized that I had to follow a certain order the conversion of local to shared. It's an intuitive you realize the properties of the entity accounts, referencing other dimensions and where they must be converted first.

  Was the order, I follow-up - alias, money, class, year, view, value, scenario, c1 - c4, PKI, accounts or entities.

  Kind regards

  S

• How can I reduce the size that Mac OSX needs during the transition to Windows via bootcamp?

  Hello

  I hope you guys can help out me. I am trying to install a copy of Windows on a 13 inch MacBook Pro retina (mid-2015, 256 GB SSD hard drive) through bootcamp. One of the first steps is to partition the SSD drive. When I try this the Mac partition cannot be resized below 70 GB, which leaves only 180 GB available for Windows to use.

  

  I would like to remove OSX completely, or make a small as possible. How do I get there?

  Kind regards

  Daniel

  Back up your current installation of OSX, install OSX on an external drive, preferably a USB Flash drive and then boot from it and run BCA, wipe you the drive internal and use it entirely for Windows. Once Windows is completely installed, you can disconnect the USB, or install OSX on an external HDD/SSD.

• Mouse Microsoft and Center keyboard problems during the recent Windows Update

  Windows 7 Professional 32/64

  Windows Update, it is a week downloaded Microsoft Mouse and keyboard Center.  Apparently it did not install correctly on Windows 7.  Messages of two windows now pop up when you start.  They are the exact same messages one above the other which must be clicked off the coast.  Here's the exact message:

  "There is a problem with the installation of the mouse and keyboard software Center.  To resolve this problem, you must remove the mouse and keyboard software from the Center, and then rerun the implementation of centre of keyboard and mouse.  For more information on the point to add or remove a program see Windows Help. »

  Message meaning, but the action of removing the software is not possible.  In the list of programs highlight Microsoft Mouse and keyboard software Center and you receive only one choice.  This choice is Uninstall, with no choice of repair .  Microsoft is lazy, or finally reached being just plain stupid.  When you click the installation here is the screen that opens:

  "Setup cannot continue because one or more of the required installation files are missing or corrupted. Rerun Setup from the CD-ROM of the software or any other facility reliable source. »

  If you cannot uninstall or repair the screwed version, then when you try to re - install, it won't let you move forward, and stipulates that you already have the software installed and it will not properly work, or will not uninstall or repair it properly.  You're essentially stuck between the hammer and the anvil.  I don't want these two double messages showing when I start my computer.

  For some strange reason, I think that this software is not properly tested to work on Windows 7.  I never install driver updates provided in Windows Update, but my wife has checked the box as an optional update.  Big mistake!

  What can I do to remove this Microsoft Mouse and keyboard software Center of my computer.  I downloaded the version 2.0.161.0 and 2.0.161.0 and won't install until the problem with the faulty software installed is removed.  WHERE IS THE BUTTON REPAIR?

  Thank you

  Bernard Butler

  You must have the patience of Job to work for MSFT.

  I, too, have the same problem as Mr. Butler, w2 further complications:

  (1) assuming that it was a Win Update that caused the problem, I went to system restore to restore to an earlier time and was shocked to find that, even if my Protection system is activated, it was never a restore point created.
  (2) in addition to this annoying pop-up message, I have now lost everything except text in all my applications (Word, Publisher, etc.) and my browsers.  No display no graphics.

  I tried your method 1 fix and received a message that it only worls on 64 bit systems.  Mine is 32.

  I tried method 2 and tried to install; Rec'd msg saying I had to uninstall it first.

  I'm taking your advice, but so far I lost three hours on this and have gotten nowhere.  Suggestion, please...

• Listen and call pick-up during the recording of the voice message.

  Is it possible in the 4.0 unit (4) with the Callmanager 4.1 integration (2) to implement the following feature?

  A caller call out for the recipient, but the recipient does not meet the call. The callmanager before the call to the voice mail pilot unit, but when the unit starts recording the message to the recipient can hear it during the registration phase and if it then takes the phone tracks back to his phone call, and they can start the conversation. If the recipient picks up the phone during the recording, the unity server automatically removes the voice message. It is the same functionality that is old voice message recording devices in the PSTN.

  This feature is planned for version 4.2 to come next year at the beginning - it is called 'message monitor' - you can listen to voicemail as they are saved and select to pull this caller out of voice mail and talk to them live if you wish.

• Various sites have suddenly shrunk in size and I can't read the fonts. How to get back to normal?

  What happened to a game on facebook, but not anything else on facebook and Google documents. It's obviously the biggest problem here because this is where I write all my papers. I don't know if there is some mysterious keys I hit or what caused this to happen, but reloading the page and firefox opening and closing it did not return to normal.

  See this:
  
  https://support.Mozilla.com/en-us/KB/page+zoom

• Problem of size and form of policy on the executable in Windows 7

  Hello

  my colleague has a problem with his application on a Windows 7 computer. It's an executable built with LabVIEW 2011 on a XP machine.

  Please see the attached screenshots for the appearance of the same exe under Windows XP and Windows 7 (where the fonts are more grand/resized).

  Do you have ideas about how to avoid this? One solution could be the use of screenshots of screen/bitmaps instead of text, but it is very uneasy about future changes.

  Best regards

  Manu

  Hi, manual,.

  This has been asked several times before:

  You must include some keys over in the INI of the executable file. I usually use those:

  FPFont = "Tahoma" 13
  BDFont = "Tahoma" 13
  appFont = "Tahoma" 13
  dialogFont = "Tahoma" 13
  systemFont = "Tahoma" 13

  Best regards!

• The display and recording time elapsed during the reading of the instrument

  I've been programming Labview for a total of two days so please bear with my inexperience. I have a 9201 module that takes a reading of the voltage and it is plotted on a graph. I click on a Boolean switch and the graph starts playback and recording data every 3 seconds. When I click on that same switch I would like to start a clock. Then once the button is clicked once again I need to stop the clock and save time. I tried to use the elapsed timer function but can not understand how to operate inside my main while loop. I don't know if I need to use a subvi or something different all together. I enclose my any project that could make the issue easier to understand. Thanks in advance for any help.

  I changed your code (personally I him would not have made it, but I don't want too many changes in your code because you are a beginner in LabVIEW!).

  -Now, there are 2 loops: 1 bow for the acquisition (looped) and 1 loop for user interface operations (while loop + event structure: it is a very powerful structure in LabVIEW and you should take a look at a few examples to understand how it works)

  -You will find a registry to offset used by loop acquisition: I explain what it is in the diagram...

  -I gave you a VI that is almost the same as 'out of time' Express VI: maybe it will be interesting to try too understand that when you get more experience in LabVIEW (you will understand 'functional global variables' and "reentrancy execution": these 2 animals are used by 'elapsed time' Express VI (but also by the VI I've included, and which is almost the same thing))

  Note that I have shown the solution to 1 of the 4 graphs: you will need to do the same for the other 3. You also need to code elapsed time saving.

  Once again, the solution I gave you is very far from perfection, but with 2 days of practice of LabVIEW, it would be too complicated to explain the different architectures and the means of communication between the loops etc...