Use of ' date of the beginning of the year.

Similar Questions

• To get the last date of the year

  Can someone tell me how to get the date of the year from the first date of last year:
  My query below gives the last date of the month
  
  SELECT LAST_DAY (ADD_MONTHS (TO_DATE (JANUARY 1, 2012 "," DD/MM/YYYY '), 12-))
  TO_NUMBER (to_char (sysdate, 'mm'))) OF the DOUBLE
  
  Thnx in advance

  SELECT LAST_DAY (ADD_MONTHS (TO_DATE ('01/01/2012', 'DD/MM/YYYY'), 11))
    FROM DUAL
  

• Use of data from the system services

  My iPhone starts 5s have a huge use of Data Services system. For a minute, it takes 100 MB (in detail its all used in general). Anyone knows what is coming? Because until now was without any problem. Thank you.

  Hello LucieMai,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to keep the data, and I will do everything I can to help. Every time we see an increase of the data after a recent update as 9.3.3 is a good idea to restart if you have not already. If the behavior persists after restarting, you may want to try to reset the network settings. This will ensure that your phone is using the last settings contact your carrier and your Wi - Fi access. Don't worry, this will only affect the settings like Wi - Fi and VPN passwords. Your content is not deleted. You have to reenter your Wi - Fi password once your device restarts.

  Make then select settings > general > reset > reset the network settings on your device.

  If you have any questions or concerns, the entire community is here to help.

  -Best regards

• Re: Satellite C660/C660D will using clear data on the D partition recovery?

  Therefore data on D safe if I use the recovery?

  Thank you

  Hello

  My knowledge using Recovery Disk format the entire HARD drive and all the partitions would be created again during this process.
  This means that your data on the D partition are not safe.

  But after my experience, retrieve the use of the HARD disk format only the partition system (C) not very well that if this applies to all laptops Toshiba so maybe you should test this first time in such a case would recommend backup data if partition D should be deleted.

• How will I know if I am being charged for the use of data on the mini2 ipad

  How will I know if I am to be charged or billed for usage on my ipad mini data 2?

  Hello

  You can be charged for the use of data on an ipad, if it has a SIM card

  Cellular data.

  If your home wifi is unlimited you will not be charged more.

  Unless your WiFi has a hat of data ie download limit.

  See you soon

  Brian

• How can I use a date in the format YYYYMMDD "" to calculate an age?

  I do a form and I want to use a military format "YYYYMMDD" date to calculate the age of the user. I found the code to find the age based on a date in the format "yyyy/mm/dd", but I have trouble finding the age after adding slashes with javascript after the date input. I use Adobe Acrobat Pro DC on OSX 10.11.6. Thanks in advance.

  Replace these two lines:

  var cDob is getField (cBirthDate) .value;.

  var cCutoff is getField (cCutoffDate) .value;.

  With this:

  var cDob is getField (cBirthDate) .valueAsString;.

  var cCutoff is getField (cCutoffDate) .valueAsString;.

• Warning of 'use of data on the disk store. "

  Hi all

  I have a cluster of vSphere 4.1 which has 4 set up data warehouses.  On one of them, I see a triggered alarm - WARNING: database on disk.

  The definition of the alarm is to use the trigger by default, so it should be caveat when using discs of data store is greater than 75% and alerts when more than 85%.

  But the free space of the actual data store is easily within these limits, and yet the warning still appears.

  Capacity: 499,75 GB

  Space in use: 312,89 GB (63%)

  Free space: 299,06 GB (used: 40%)

  Update the: 08/04/2011 10:21:58

  On other data warehouses (which all lie on the same Dell |) EqualLogic array), I don't see any warnings.

  Any suggestions / ideas how I can delete it?

  Thank you

  Kevin

  Hello.

  It is a known problem.  You can deactivate and activate the alarm, as detailed in KB 1015642.

  Good luck!

  Post edited by: vmroyale

• To find the last year data / data of the year an individual

  Hello
  
  How to find the data for the whole of last year, I tried like
  
  entered_date between to_char (December 31, 2008 11:59:59 ', ' HH12:MI:SS MM/DD/YYYY ')
  and to_char (1 January 2010 00:00:00 ',' DD/MM/YYYY HH12:MI:SS'), but it's an error invalid number.
  
  Thank you.

  Hello

  If you want something that doesn't require you to hardcode a year, but the numbers automatically in what year it is:

  WHERE   entered_date     >= ADD_MONTHS ( TRUNC (SYSDATE, 'YEAR')
                                            , -24
                                  )
  AND     entered_date     <  ADD_MONTHS ( TRUNC (SYSDATE, 'YEAR')
                                            , -12
                                  )
  

  There are a couple of things to notice on the expression that you posted (in addition to using TO_CHAR TO_DATE instead):

  WHERE  entered_date     BETWEEN TO_DATE ('12/31/2008 11:59:59', 'MM/DD/YYYY HH12:MI:SS')
                        AND       TO_DATE ('01/01/2010 00:00:00', 'MM/DD/YYYY HH12:MI:SS')
  

  BETWEEN includes two end points, so the phrase above covers just a little over a year. It includes a second of 2008 and a second in 2010, as well as the whole of 2009.

  Currently, 2010 is the last year, so the expression you have posted (as well as my suggestion) is actually for the year before last year, but it can easily be changed for the whole year.

• difference between two dates in the year/month/day in Obiee

  Hi gurus,

  I know this question have been asked and answered several times but I have a requirement that is a little different, then the previous ones.

  I want to calculate the difference between two dates in OBIEE10g in year/month/day format similar to the below SQL output

  SQL > select end_date, start_date,

  trunc (months_between (end_date, start_date) / 12) years.

  months of mod (trunc (months_between (end_date, start_date)), 12).

  End_date - add_months (start_date, trunc (months_between (end_date, start_date))) days

  t

  Thanks in advance

  SK

  Search for this

  "TIMESTAMPDIFF IN THE FORM OF MTHS # YEARS."

  or else

  To get the current mandate of employees since the date of hiring in the form of # years # mths or # year (s) # month (s)

  Concat (concat (cast (TIMESTAMPDIFF (SQL_TSI_Month, "Employee attributes". (((' ' Hiring last Date employee ", CURRENT_DATE) / 12 as char),"Year (s)"), concat (cast (MOD (TIMESTAMPDIFF (SQL_TSI_Month,"Employee attributes". (((((' ' Hiring last Date employee ", CURRENT_DATE), 12) as char), 'Month (s)'))

  Concat (concat (CAST (TIMESTAMPDIFF (SQL_TSI_YEAR, "Employee attributes". (((' ' Hiring last Date employee ", CURRENT_DATE) as CHAR),"Year (s)"), concat (cast (MOD (TIMESTAMPDIFF (SQL_TSI_Month,"Employee attributes". (((((' ' Hiring last Date employee ", CURRENT_DATE), 12) as char), 'Mth (s)'))

• How to find the next date of the year and day as of today's date and the day

  I have a question about date functions, that is to say: how to get one next year (date and day) like today are the date and the day this year?

  You mean like this?

  SQL > select to_char (add_months (sysdate, 12),' day DD/MM/YYYY ') twice;

  TO_CHAR (ADD_MONTHS (S
  --------------------
  Friday, August 22, 2014

• recent completion date of the year

  I have an Assembly date someone who is 20 October 2008.
  
  the person of this Assembly date now full years on 20-OCT-2009,20-OCT-2010,20-OCT-2011 till now.
  
  I want to select the maximum date of end of the year, which should be less then sysdate, and this date is October 20, 2011.
  
  What will be the command to select that date in 9i?

  Simply apply a max function for the result set:
  ------

  WITH t AS
          (    SELECT ADD_MONTHS (TO_DATE ('20-OCT-2008', 'DD-MON-YYYY'),
                                  ROWNUM * 12)
                         dt
                 FROM DUAL
           CONNECT BY ROWNUM <=
                         TO_CHAR (SYSDATE, 'YYYY')
                         - TO_CHAR (TO_DATE ('20-OCT-2008', 'DD-MON-YYYY'),
                                    'YYYY')
                         - 1)
  SELECT MAX (dt) dt
    FROM t;
  

  output:

  dt
  ----
  10/20/2011
  

  See you soon,.
  Manik

• Excessive use of data on the MacBook Air

  Just made the switch from PC to Mac.  MacBook Air (El Capitan) with tons of data at startup.  I disabled automatic downloads in the app store.  What can I do else?  Using 3-400 MB every morning.

  Any client on a network, including wireless clients, you don't know, could be the consumption of bandwidth. Networks Wi - Fi must be protected with WPA2 security. If yours is not, change the setting of security on the access point. If it is already defined in this way, change the password. Make a chain of at least 8 random characters, including uppercase and lowercase letters and numbers. The password is saved in the keychain and you don't have to remember it. in fact, you should not be able to remember.

  You make these changes in AirPort Utility, if the access point is an Apple device or in a web browser otherwise.

  If the network or the password was precarious, and bandwidth utilization returns to normal after it, you can be sure that the problem was caused by intruders.

  But the intrusion may not be the question. Most of BitTorrent, iCloud, Dropbox or another application of data on clouds intervenes when mysterious bandwidth by a Mac using. If you use iCloud, uncheck the box at least iCloud in its pane preferably by car and see if there is no change. If you use a backup software or the third-party network file-synchronization, disable that. If you use a torrent client, remove it.

  Otherwise, if you're running OS X 10.9 or later, you can see which processes are most active on the network.

  Please launch the activity monitor application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Select all processes in the view menu, if not already selected, and also select the network tab.

  Click on the header of the column of bytes transmitted in the process table to sort the entries of the bandwidth. You may have to click twice to get the highest value at the top. What is and what is the process? Repeat with column bytes Rcvd.

• The use of data in the dialog box

  Hello

  I started using DIAdem Dialog Editor and I wonder how I would use data that has been entered in a dialog box or table cell perform some calculations on it and display the results in another dialog box.

  I'd also be looking to retrieve data in a drop-down list or dialog box and and displayed it in my final report format.

  
  

• 71622 error code when you use read data from the encoder vi

  Hi, im using PXI7340 Motion control and I get the error-71622 code that is not defined if I try to search in the help explain error section. I get this error when I try to use reading encoder vi data. I would like to get the index data and I can not find that an another vi Traoré did this. Any suggestions

  Again, could you please show me how you have implemented that?

  Let's take a step back. What exactly are you trying to accomplish? You want to find the index position? Can find reference should do the job for you.

• Houston-25080 error on the use of data to the web service control

  Do not get all the answers to that. Is this a bug? and if so, how do I file the bug?
  
  Hello
  
  I'm trying to use Jdev 11 g to build a simple web application. The application page uses a web service (called "theAssetType") data control. But I get the following error message when I try to get the message 'return' on the page widget. The name of the service on the server is CM_RJCP2.
  
  Besides - this service works very well with the HTTP Analyzer - so don't know why it doesn't work in the JSF page.
  
  Your help is greatly appreciated!
  
  oracle.jbo.NoDefException: Houston-25080: definition name: CM_RJCP2 does not correspond to the file in which it is responsible for: oracle.myweb.model.theAssetType.CM_RJCP2. CM_RJCP2
  at oracle.jbo.mom.DefinitionManager.loadLazyDefinitionObject(DefinitionManager.java:999)
  at oracle.jbo.mom.DefinitionManager.loadParent(DefinitionManager.java:1228)
  at oracle.jbo.mom.DefinitionManager.loadLazyDefinitionObject(DefinitionManager.java:933)
  at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:482)
  at oracle.jbo.mom.DefinitionManager.findDefinitionObjectDontCheckName(DefinitionManager.java:433)
  at oracle.adf.model.bean.DCBeanDataControl.findStructureDef(DCBeanDataControl.java:1884)
  at oracle.adf.model.bean.DCBeanDataControl.getAttributeDefs(DCBeanDataControl.java:1936)
  at oracle.adf.model.binding.DCIteratorBinding.getAttributeDefs(DCIteratorBinding.java:3142)
  at oracle.jbo.uicli.binding.MyIteratorBinding.getAttributeDefs(JUAccessorIteratorDef.java:494)
  at oracle.jbo.uicli.binding.JUCtrlValueBinding.fetchAttrDefs(JUCtrlValueBinding.java:485)
  at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDefs(JUCtrlValueBinding.java:437)
  at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDef(JUCtrlValueBinding.java:511)
  at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDef(JUCtrlValueBinding.java:501)
  to oracle.jbo.uicli.binding.JUCtrlValueBinding$ 1JUAttributeDefHintsMap. < init > (JUCtrlValueBinding.java:3857)
  at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeHintsMap(JUCtrlValueBinding.java:3952)
  at oracle.jbo.uicli.binding.JUCtrlValueBinding.getHints(JUCtrlValueBinding.java:2417)
  at oracle.jbo.uicli.binding.JUCtrlValueBinding.internalGet(JUCtrlValueBinding.java:2379)
  at oracle.adfinternal.view.faces.model.binding.FacesCtrlAttrsBinding.internalGet(FacesCtrlAttrsBinding.java:277)
  at oracle.adf.model.binding.DCControlBinding.get(DCControlBinding.java:750)
  at javax.el.MapELResolver.getValue(MapELResolver.java:164)
  at javax.el.CompositeELResolver.getValue(CompositeELResolver.java:143)
  
  Published by: rjcovert on December 29, 2009 09:11
  
  Published by: rjcovert on January 3, 2010 08:31

  There is a bug with datacontrol whose name is the same as the package directory.
  I think that you can run in this case - you can try working in a different package name?
  (or try to refactor-> move your files).