using the custom value sets rules of SOUL of special type of information

Similar Questions

• my privacy setting is stuck on do not forget history, won't stay on using the custom settings for history, after I've selected and click ok

  When I go to tools, Options, privacy and "Use the custom settings for history" of the value and then click on OK it won't save. It remains on "Remember history", even if she never will save "remember history" as I tested it. It seems if be produced after these recent last Firefox update. Anyone know why I can not choose "Use the custom settings for history", as is the parameter I want to use?

  Why aren't satisfied with the history settings by default that you currently have?

  Any changes (for example, to disable the cookies third party or form not given memory or keep cookies until you close Firefox and make an exception for the cookies you want to keep) that you will cause "use... custom parameters. "to be selected if you really want to see.

• Can I use arrowheads and figures to be the custom shape set come with photoshop in graphic design that will be put on Youtube?

  Can I use arrowheads and be in numbers the the custom shape set come with photoshop in graphic design that will be put on Youtube or social networking?

  Hi albert xu,.

  Greetings!

  Yes, you can as this is why photoshop is intended.

  You can use and create designs and post that publicly.

  Concerning

  Jitendra

• How can I clear the browser history when you use the custom settings for history?

  When my history option is set to "Use the custom settings for history", the options page has no link to "clear recent history". There was formerly a menu option, but that seems to be gone now with Firefox 29. Is my only option to access the dialog box, clear the history all to change the historical option to history to remember and then change it back? Is there another way to access the option erase history all?

  I think you can get the menu bar by pressing the ALT key. If you want to return permanently, click View > toolbars and check menu bar.

• Firefox guard handed himself to "never remember history" even if I say "use the custom settings for history".

  Firefox seemed to work fine until yesterday. When I used Firefox yesterday, my home page was changed to Firefox start page and did not open my tabs from the day before. I went to settings and changed the homepage back to google.com and told to "use the custom settings for history". I closed Firefox and opened it again and my homepage was google.com, as I put it, but it was back to "never remember history". I tried several times, yesterday and today, but Firefox keeps affecting himself never "remember history".

  Choose the 'use the settings customized for history' parameter is not make changes to the parameters of the history and cookies.
  
  Firefox displays the "use the custom settings for history" as an indication that at least one story and cookie settings is not the default to make you aware that the changes have been made.
  
  If all the history settings are default, custom settings are hidden and see you "conservation rules: (never) don't forget history."

  Don't remember history"means that private browsing is active and"Always use private browsing mode"Gets a check mark.

  • https://support.Mozilla.com/kb/private+browsing

• Examples on how to use the external value of the vro

  I'm trying to use the 'external value' VRA 7 feature to get data for a property definition.  Examples or guides?   I have a quick action that returns the string, but I get this error

  

  Figured it out... the exit on the action must be array/string...

  now working to reproduce the relantionships parent on custom properties that not available in version 7

• applicationContext remains "null" after using the custom url scheme to launch the app

  Hello

  I am currently working on a DPS application for a customer who wishes to use its own authentication system.

  The client system is implemented so that they send the valid token to a URI with a custom method.

  By setting the same pattern custom in my app DPS constructor, I can get the app from the login window.

  What is described in the library of DPS & Api store 2.32 documentation, I understand that

  " adobeDPS.configurationService.applicationContext must contain several variables associated to how the viewer was started or enabled:" ","this class represents the context under which the application is launched '

  
  

  However, in my application when I try to see what contains the applicationContext, the object is always 'null '. It doesn't matter if I started the application by clicking on its icon or if it was launched using the custom uri scheme.

  
  

  Is this a bug or am I missing something here? I really need this token.
  

  Hello

  After being stuck for a while trying to work with the url of my client for usage, I finally tested it with a modified version and have found the cause of the problem.

  Work of first information provided by a colleague who was apparently not detailed enough for the customer asked me to use a url of the form App. scheme://auth/#token=...

  It turns out that this kind of url can start or bring the app to the front, but applicationContext remains empty.

  My tests using a url in the same form as you suggested (eg. app. scheme://v1/slot/library) can trigger the app or transmit data.

  The documentation available in the SDK library & shop and article on how to use a custom template is very vague on what formats link actually works, and how we can vary with it.

  A breakdown of official links to pieces, that the parties do and what items can be modified (for example ' / appstate') within the API documentation would be a great help for developers, I think.

  Kind regards

  Lorin

• I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it do

  I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it doesn't.

  Thank you for taking the time to help me!

• Use the return value to do step digital multiple success or failure

  Hello

  I use a multiple digital step to check several measurements by an external DMM through a function created in CVI.  I would like to use the return value of the function to replace the global status of the step. The reason is that the return value indicates a communication error, while steps are being taken, and which would lead to a "fake" fake or false 'Pass '.

  What I would do is more or less this >

  If the return value is 0, then check if the measuremets are between the limits

  If return value! 0 = there was a communication error so step continues to operate independently of the measure.

  I tried combining multiple digital step with a step of pass/fail, but it does not work.

  I also trie to change the expression of the status of the multiple digital steps but basically ignores him.

  Any ideas?

  Thank you

  Javier

  Why don't you just make that return the value limits for multiple numerical limit stage.  Comparison of the EQ value and the low limit to 0.

  That would make the most sense.

• kindly tell how to use the unique value of a table with the index 0

  kindly tell how to use the unique value of a table with the index 0

  Hi
  
   
  
  Yep, use Index Array as Gerd says. Also, using the context help ( + h) and looking through the array palette will help you get an understanding of what each VI does.
  
   
  
  This is fundamental LabVIEW stuff, perhaps you'd be better spending some time going through the basics.
  
   
  
  -CC
  

• How to change the value of string clustered, to implement using the node value of property instead of writing directly on the flow of data or using the variable

  new to labview :-) and I have a problem when I want to change the value of a string in bunches, and I want to implement this using the node value of property instead of writing directly to the stream or by using the variable, enclosed is the picture.   No matter, I have change in cluster (control) or value of Popery out (indicator) cluster, the value (sensor 7) dataflow keeps unchanged even I gave the new value by value of property node. Thank you to give me some advice about this.

  

  Hi GerdW

  Thanks a lot for your answer. The reason I'm stubbornly tring to break the flow of DATA is: we have a test system that have about 100 screws, they have a few connected flow, some of them will be unbundling a cluster dataflow chain to check the value in order to make the different cases.  Now I want to insert user event by changing the control and influential cases during run time.

  As I initially uses a global variable (to control cases) instead of unbundle string data flow, it works well.  But then, I found there are a lot of screws that are using the string unbundle.  One of the 'lazy' means, I tried is to change the value via the property node (because that way, I did not need to find all the places where using the unbundle string and replace them with the global variable), then I noticed a problem with "dataflow", the value in the stream of cluster in fact will not be changed by changing the value of the property node.

  I did a test with VI simple (like the picture in last post), and after reading your advice, I tell myself that I need to understand the concept of "DATAFLOW" in labview, it seems that my "lazy" way can not work in this scenario.

  I have attached the criterion VI here, have you furthur suggestions on what I can do in this case?

  Mant thanks!

  Minyi

• The number of characters is allowed when we use the ' have value in ' option when you create a filter?

  The number of characters is allowed when you use the option "value in" when you create a filter?

  Hey,.

  300 characters are allowed when we use the option "value in" everything by creating a filter.

  Thank you

• Application of interactive report of apEx using the last value of the point

  My interactive report is based on a field, but the value of the field is not applied when executing the query

  SELECT *.

  MyTable FROM A

  where A.registration_year =: REGISTRATION_YEAR_ITEM

  I created an item in the page REGISTRATION_YEAR_ITEM

  When I run the query, I want the user to type in a year, and then run the query and display the corresponding results.

  The query always seems to use the default value of points instead of the current value

  How can I do use the value of the current field?

  I also tried the V method, but produce the same results

  where A.registration_year = v('REGISTRATION_YEAR_ITEM')

  
  

  The environment is ApEx 312, 10.2.0.4 database

  Unfortunately, the upgrade is not an option

  
  

  Thanks for any help you can offer
  

  S.Bovin wrote:

  My interactive report is based on a field, but the value of the field is not applied when executing the query

  SELECT *.

  MyTable FROM A

  where A.registration_year =: REGISTRATION_YEAR_ITEM

  I created an item in the page REGISTRATION_YEAR_ITEM

  When I run the query, I want the user to type in a year, and then run the query and display the corresponding results.

  The query always seems to use the default value of points instead of the current value

  How can I do use the value of the current field?

  Add the REGISTRATION_YEAR_ITEM to the IR Page elements to submit property. He will submit the current value in session state.

  Why bother with the page element at all? Why users can't create just an IR filter?

  I also tried the V method, but produce the same results

  where A.registration_year = v('REGISTRATION_YEAR_ITEM')

  For performance reasons, use bind variable notation when you reference values from session state in SQL queries.

  The environment is ApEx 312, 10.2.0.4 database

  Unfortunately, the upgrade is not an option

  Why not? That it will provide you with a safe and supported environment and your users with a much better life.

• Is it possible to use the default value as sql expression in obiee 11g report?

  Hi all

  Is it possible to use the default value as sql expression in obiee 11g report?. Actually what I'm trying to make is that we send an ibot users. They want the same default values that are assigned in the command prompt in the report. So when we send the ibot it shows the report for default values assigned in the report criteria which is obsolute. As a solution, I kept the report in a dashboard page and send the dashboard like ibot page. But the problem here is that I can send only pdf format. Is it possible to do so at the level of the report (without using session variables). I want something like that

  Date between Date ' @{PV1} {Timestampadd (SQL_TSI_DAY,-90, CURRENT_DATE)} and Date ' @{PV2} {CURRENT_DATE}

  Thanks in advance

  Thank you

  AJ

  http://www.w3.org/2001/XMLSchema-instance"container ="http://www.w3.org/2001/XMLSchema"xmlVersion ="201201160' xmlns:sawx="com.siebel.analytics.web/expression/v1.1" > "

  "Question time '." Date '.

  "Question time '." Date '.

  BOX WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 1) THEN TIMESTAMPADD (SQL_TSI_DAY,-2, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 2) THEN TIMESTAMPADD (SQL_TSI_DAY,-3, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 3) THEN TIMESTAMPADD (SQL_TSI_DAY,-4, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 4) THEN TIMESTAMPADD (SQL_TSI_DAY-5 (, cast (max (CURRENT_DATE) date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 5) THEN TIMESTAMPADD (SQL_TSI_DAY,-6, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 6) THEN TIMESTAMPADD (SQL_TSI_DAY, 0, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 7) THEN TIMESTAMPADD (SQL_TSI_DAY-1, cast (max (CURRENT_DATE) date)) END

• I want to use the custom pattern, actions ets... But I can not find custom files to [presets > model] or [presets > actions]... Where should you put these files?

  I want to use the custom pattern, actions ets... But I can not find custom files to [presets > model] or [presets > actions]... Where do I put these files?

  If you're on a PC - C:\Users\ [username] \AppData\Roaming\Adobe\Adobe Photoshop CC 2015\Presets