Using the MS ODBC driver to connect to Oracle and MS SQL DB - get a time-out error

I have the driver installed and configured on the Linux host where sits the Oracle DB.  I worked through the configuration and tested along the way.

If I execute the following SQL statement I get a timeout error after only 15 minutes:

SQL > select * from [email protected];

Select * from [email protected]

*

ERROR on line 1:

ORA-28511: interruption of the RPC connection to heterogeneous remote agent to help

SID = ORA-28511: lost RPC connection to heterogeneous remote agent to help

SID = (Description = (Address = (Protocol = TCP)(Host=localhost) (port = 1521)) (CONNECT_DAT

A = (SID = UCMDB806)))

ORA-02063: preceding the line of UCMDB9

Process ID: 4070

Session ID: 392 serial number: 40935

If I limit the SQL to give hosting me only that start with 'a', I get this:

SQL > select * from [email protected] where (name) lower like 'a % ';

ID

------------------------------------------------------------

NAME

--------------------------------------------------------------------------------

TenantID

------------------------------------------------------------

name of the vendor

--------------------------------------------------------------------------------

softwarename

--------------------------------------------------------------------------------

4616

AHOST-B

76436

ID

------------------------------------------------------------

NAME

--------------------------------------------------------------------------------

TenantID

------------------------------------------------------------

name of the vendor

--------------------------------------------------------------------------------

softwarename

--------------------------------------------------------------------------------

SYMANTEC

.

.

.

It seems to be a time-out on this query.  My software is located 20 minutes for a query.  MS SQL server is set to unlimited for remote queries (we did it to help isolate the timeout).  So, I guess the wait time that is happening at the level of ODBC driver.  Someone has all understand how to solve this problem?

Advertisement

Hello

Your question is beyond the scope of this community.

Please repost your question in the SQL Server TechNet Forums.

https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

See you soon.

Tags: Windows

Similar Questions

  • I removed mcafee security because the subscription was on now Defender does not illuminate. I get a time-out error?

    I removed McAfee because membership was about to expire. Then I went to turn on the defender and it will not turn on. I get a time-out error. How can I solve this problem?

    Run the McAfee Consumer products Removal Tool (free from here: http://service.mcafee.com/FAQDocument.aspx?id=TS101331 )
    Direct download here link: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

    Once done, go to the center of the Action and activate Windows Defender and Windows Firewall.

  • How to use the SDLT tape drive in the guest OS VM

    Dear

    now, I have HP DL380 G5 Server running windows 2003 Ent. with bus adapter host SC11xe PCI - E HP which directly connected tp SDLT Tape Drive as backup server and use for the backup operation.

    I want to move the physical backup to host vmware server and EMC AX4 allows you to have a backup online and allows you to take backup offline, SDLT tape drive

    My question is how I use the SDLT tape drive in guest OS vm and vmware knows "HP PCI - E SC11xe Host bus adapter" or not.

    Please let me know how to do this.

    Kind regards

    Mahdi Bellavia

    I have a G5 DL385 (AMD of the DL380 version) with a DLT3.   I use an Adaptec 29320LPE, appearing on the compatibility list.  We plugged a HP Ultrium 920 changer using the 'old method' SCSI passthrough.  We bought the Adaptec card, because we used initially ESX3.5.  We are now on ESX4.0, but for various reasons, the configuration left the same, so I have not tried with VMDirectPath I don't know if it is possible to use the SC11ex card, but if you arrive VMDirectPath at work, it seems then you need another SCSI card.

  • EAS 11: Rule of load is not using 32-bit ODBC Driver

    Hi all

    Problem: I want to build a Dimension with a rule of the load. Load rule gets data from an Access database then I mounted a 32-bit ODBC connection on a Win 2003 64 bit server. Essbase 64 Bit is only looking at the connection ODBC 64 bits-so, how do I use the 32 ODBC connection or ist there a 64-bit - ODBC-driver for MS Access?

    Thx for your help and brgds,

    Maik

    I don't think that there is a 64-bit Access ODBC driver.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • I get an error message: The Nvidia OpenGL driver lost connection with the display driver and can not continue. Error code 8

    When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?

    Information System
    ------------------
    Time of this report: 13/06/2011, 19:40:20
    Machine name: BEN - PC
    Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
    Language: English (regional setting: English)
    System manufacturer: HP-Pavilion
    System model: GC670AA-ABA a6120n
    BIOS: Phoenix - AwardBIOS v6.00PG
    Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
    Memory: 4096 MB RAM
    Available OS memory: 3582MB RAM
    Page file: 1690MB used, 5472 MB of available space
    Windows Dir: C:\Windows
    DirectX version: DirectX 11
    DX setup parameters: not found
    User DPI setting: 96 DPI (100%)
    System DPI setting: 96 DPI (100%)
    DWM DPI Scaling: disabled
    DxDiag Version: 6.01.7601.17514 64 bit Unicode

    Two monitors

    Display devices
    ---------------
    Card name: NVIDIA GeForce 7600 GT
    Manufacturer: NVIDIA
    Track type: GeForce 7600 GT
    DAC type: Integrated RAMDAC
    The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
    Memory display: 1768 MB
    Dedicated memory: 248 MB
    Shared memory: 1519 MB
    Current mode: 1600 x 900 (32 bit) (60 Hz)
    Name of the monitor: generic PnP monitor
    Monitor model: G205H (Acer)

    Card name: NVIDIA GeForce 7600 GT
    Manufacturer: NVIDIA
    Track type: GeForce 7600 GT
    DAC type: Integrated RAMDAC
    The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
    Memory display: 1768 MB
    Dedicated memory: 248 MB
    Shared memory: 1519 MB
    Current mode: 1280 x 1024 (32 bit) (60 Hz)
    Name of the monitor: generic PnP monitor
    Monitor model: NEC LCD7V

    Hello

    I suggest that you have watch the following link below:

    http://forums.developer.nvidia.com/index.php?showtopic=5331

    I hope this helps.

  • His delay in using the DVD/CD drive on Satellite a series

    I don't watch DVD on my laptop for often, but when I do, it lags behind.
    It looks like its be delayed for half a second.

    It is somewhat a his jerky aswell.
    When I play CD on iTunes, the sound is delayed as when I play the DVD but if I import them, they sound great.

    Any help?

    Also, if you post something for me to do.
    You will post how to do cause I have no idea! : P

    Hmm according your description any audio CD or DVD lag by using the CD/DVD drive

    I think I know what problem might be;
    Choose:
    -Primary IDE channel-> properties > Device Manager-> Advanced settings

    Please check if DMA if available option has been chosen.

  • How to use the second HARD drive of Satellite A210 - BP1 for mirroring

    Satellite A210-BP1 came with 2 HDD (160 GB).
    Now, I want to use the second hard drive mirrored the first, one that has Vista installed.
    This should be done without supervision and in real time - as a RAID 1.

    How can I do this?
    I also have Vista professional available and I would be willing to use 3rd party software as well.

    Thanks in advance for your answers.

    Hi Jan

    I doubt that this is possible
    Why? The point is that you need to use two hard drives in mirroring, RAID striping, mode etc technology
    Satellite A210 can't RAID. It s only a SATA controller without RAID capacity!

    Therefore, the final answer is; NO, it is not possible to use mirroring

    Concerning

  • I already have one zero drive for FCP 7 projects implemented.  I would use the same scratch drive for FCP 10.  Is there a special way of implementation is seamless?

    Said to implement the scratch disc so I can use the same hard drive for FCP 7 and 10 projects - something on a folder separated for 10 projects.  What are the steps to do t his?

    More details would be useful. You have already imported media in FCP7? Or you are just starting to work with both applications at the same time? What application you plan to use to ingest media? Don't try to use them both for ingest.  You can set FCPX to use the FCP7 Capture Scratch location for your support and then let the media imported in place. You can also assign a location for media to import using FCPX and then use this location for FCP7, again leaving the media in place.

    Or I totally misunderstood and you only talking about using the same drive, which is not a problem at all.

  • Now, I am unable to use the Terminal Server service to connect to one of my Windows XP machines.

    Hello

    I used the Terminal Server service to connect to a remote Windows XP/Win 7 XP machine machines. At the beginning of this, it was beautiful, but after some time, say 1/2 hours, this remote XP computer has become inaccessible and even I couldn't use Teamviewer is there to connect! But when I went to this remote computer to XP, I noticed his connection was fine and I could ping www.google.com on it!

    original title: unable to connect to him

    Hello human Chen,

    Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

    http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

    I hope this helps.

  • need to repair the startup of windows, files, but cannot use the cd-rom drive

    for the past 6 months that I had to use a return to the top of the boot disk to get windows to load so I could copy all my important files and documents on DVDs as my windows xp edition home sp3 OS suddenly stopped wanting to load normally and I'd just reformat the HD

    Last week... my browser froze causing me to have to stop by turning off the power button... to restarting my pc, my cd-rom drive is not found and now I am unable to finish to copy my important files and these DVD

    is there anyway I can repair windows without using the cd-rom drive... .. I can get in the F12 boot menu but not in the installer of F2 or F8 safe mode without using a cd-rom drive to launch the boot disk

    2.2 under Win XP home edition sp3 dell xps 210 system, intel duo core processor 4 GB ram and 500 GB HD

    It has only 1 CD/dvd-rom combo drive and 4 smaller slots for memory cards and other... I have 3 slots open usb but do not have the files of windows to a flash drive recovery

    would it be possible to make a recovery file or file on a USB stick the size of a flash drive and boot would need... currently the largest one I have is 4 GB

    Hi storm36,

    You must have the Windows XP disk to repair Windows. As the CD/DVD drive is not getting detected, we recommend you try the following steps and check the result.

    Step 1: Check if the device is detected in the BIOS (basic input/output device)
    a. start your computer and press on delete key continuously to see the BIOS.
    b. check if the CD/DVD device is detected.
    c. If this isn't the case, then unplug the unit and he reconnected inside the CPU/Tower.
    d. check the result.

    Step 2: If the device is detected in the BIOS, try the following steps:
    a. start your computer and boot to the desktop.
    b. Click Start, click Run, type devmgmt.msc, and then click ok.
    c. select my computer, click the Action menu and click scan for hardware changes.
    d. check if the CD/DVD device is listed in the list.

    Step 3: If the problem persists, restore the computer
    see How to restore Windows XP to a previous state .
    b. Once you have restored the computer, check if the CD/DVD drive is visible.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • HP G62-355DX: recommend some course HP laptop model that can be used the same hard drive using G62-355DX?

    I have a HP G62-355DX dead, I think the hard drive is ok, so I want to buy a new laptop HP to change the hard drive, so I can recover my data and OS environment.

    Could someone please recommend some course HP laptop model that can be used the same hard drive as G62-355DX use?

    Even the hard drive can not put it in the bag laptop, but work with the HARD drive interface.

    Or is there any external HARD disk enclosure can be used to read the data hard disk, the data does not have compreesed.

    Thank you in advance.

    Hello! You need a new PC Yep!
    But there are other ways to do

    You can buy a SATA USB adapter that will allow you to plug in the HARD drive on another PC and the take-off data

    NOW YOU CAN ONLY SAVE DATA FROM THE DISK IF THE HARD DRIVE IS NOT DEAD

    Good luck!

    Best regards: 1029rjmenvy17t

    Please "KUDO" if you like for thumbs to the top and "Accept as Solution" if this fixed your problem

    To help others find it and helps solve them the same or similar problems

  • His flashes always (white, black) in illustrator > on my (surface pro3, Win10) and desktop (Win10) with creative illustrator of cloud. Can no longer use the program. / Driver WACOM have uninstalled, reinstalled illustrator, graphics driver re-installed

    no longer works because

    His flashes always (white, black) in illustrator > on my (surface pro3, Win10) and desktop (Win10) with creative illustrator of cloud. Can no longer use the program. / Driver WACOM have uninstalled, reinstalled illustrator, reinstalled video card driver

    I start the program and then it will begin to Flash white and black.

    On my machine of Tablet and desktop

    I use win10 on both

    need illustrator very soon

    It works again!

    I realized that I had installed a security plugin in order to access my bank account. It was the Warsaw by the GAS technology. I removed it and Illustrator came back to life! No more black and white flashing and slow down.

    I hope this helps! (:

  • Need help on how to use the conference room in adobe connect

    I need help on how to use the conference room in adobe connect?

    I would recommend you start here: Getting Started with Adobe Connect - Adobe Connect user community

  • After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

    After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

    Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

    [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

    4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

    NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

    5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

    6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

    NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

    7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

    8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

    9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

    10. restart once again & test.

    NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

      I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

      Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

      OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

    keimanzero,

    Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
    First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
    NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

    Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

    Secondly, I suggest that you run the File Checker system while in the same clean boot state.
    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the field search programs and files .
    2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
      If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
      sfc/scannow

    When the analysis is complete, test to see if the problems facing the system have been resolved.

    If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

    Expert MowGreen Windows IT Pro - consumer safety

Maybe you are looking for

  • MOM.exe ordinal not found 575 could not be located in the binding Dynamics lybrary

    This happens every turning of time on my computer.   Usually, I restart my computer it is running a disk check and all is well.  Now I can't run a disk check.   Nothing that I can think is to help right now.Can you?Thank you

  • Windows Vista startup problem

    Signature of the problem: Problem event name: BlueScreen OS version: 6.0.6001.2.1.0.768.2 Locale ID: 16393 More information about the problem: BCCode: 1000007e BCP1: C0000005 BCP2: 873BF38A BCP3: 8D5E56BC BCP4: 8D5E53B8 OS version: 6_0_6001 Service P

  • Failure of Windows updates

    The past 5 times I shut down my computer to install updates, after reboot it shows the message "configuration of the Windows updates failed.  Returning from the changes. "Why he could do, and how do I install the updates successfully? Thanks to all w

  • Smartphones Remove blackBerry gmail address?

    Background: BBPearl 8110, v4.5.0.158 (Platform 2.7.0.106) Previously, I don't have an email address added to the BB email client.  I was crossing the specific gmail of gmail app and get only SMS in my Messages.  I couldn't see the FB notification via

  • I have a paid subscription, but when I run Lightroom 6, does an eval version expired!

    I have a paid subscription, but when I run Lightroom 6, does an eval version expired!Really annoying when a client cannot use product cost him - please provide customer service as soon as possible.