V2 Intel E7 processors do not support virtualization!

Hi everyone having issues with Intel these days.

When you check the specifications of the CPU Intel E7 v2 family there no virtualization VT - x support in the record.

Please see link below the list of processors intel supports virtualization.

http://Ark.Intel.com/Products/VirtualizationTechnology -> E7 No. v2 processors here...! ?

Also check in with an E5v3 in snapshot comparison table attached. There is no virtualization technology.

ARK | Compare Intel & amp; #174; Products

When you check the Vmware support matrix, this CPU seems to be very good for virtualization.

I'm confused. Same Intel USA cannot give a clear answer to this question. So if there is no employee of VMware here, could you please escalate my request?

Thanks in advance.

Today, I see that they have updated the plug. Now, it is well

Looks life officially E7 V2 CPU virtualization support

http://Ark.Intel.com/products/VirtualizationTechnology

Tags: VMware

Similar Questions

  • Quad Core Processor, VT not supported on one of the four cores

    I've had a look around forums and couldn't find anyone else having this problem.

    I built a machine based on a chip Quad Core Q9400, 2 GB of memory and an Intel G41 motherboard

    I installed CentoS 5.3 and vmware server 2.0 yesterday turned on VT in the BIOS and everything was fine, I installed a copy of windows server 2003 x 64.

    This morning, I upgraded the memory to 8 GB, 800 MHz, and when I rebooted, my server have complained that the chip did not support 64-bit.

    Starting with the vt.iso shows all 4 cores, but reads as follows

    Core 0: this core does not support the VT

    Base 1: VT is enabled on this core

    Core 2: VT is enabled on this core

    Base 3: VT is enabled on this core

    Someone has ideas have VT can not be supported on a carrot? I tried to reset the BIOS, but the previous 2 GB of memory, reinstalling the processor, nothing worked

    This sounds like it might be erratum Intel AV69 (http://download.intel.com/design/processor/specupdt/318727.pdf).  Have you checked the BIOS updates?

  • Windows Virtual PC cannot start because this computer does not support virtualization hardware-business intelligence

    I have a Sony Vaio VGN-NW235F and I am a student in the it field. A lot of my software are not supported by Windows 7. So I upgraded my Windows 7 Home Premium to Windows 7 Professional so that I can run Virtual PC. But I'm not able to run due to the above error...

    Please kindly help me

    Thanking you,

    Paths

    Salvation of the paths,

    Looks like you are trying to get XP Mode configured, that will install a virtual machine for you to run your legacy programs.  This feature is available in the professional versions, full and Enterprise edition - so your property in this aspect.

    You get this error message because you do not have the chip installed for hardware - assisted virtualization technology and it's good. you don't need more.  Click on this link http://www.microsoft.com/windows/virtual-pc/download.aspx and select your language and edition.  Then scroll down to step 3.  You must download and run the third component called Windows XP Mode Update. This update will remove the requirement that you have the chip mentioned above.

    That should do the trick.

    Barbara

  • Impossible to pass to windows 8.1 because my processor does not support

    OK so I have windows installed on my dell OptiPlex 745 8.1, I uninstalled so I could go to a 64 bit OS. Now it won't let me not reinstall windows 8.1 and says "sorry you can not install the patch because it is not supported by your CPU" I have 8.1 installed before.

    Even if your computer's processor is capable of 64-bit, it does not support some Extensions in order to install 64-bit Windows 8.1.

    What are the EAP, NXand SSE2? - Windows help

    If it does not support these extensions, a BIOS upgrade may be required to activate the support.

    In some cases, you might be stuck with Windows 8.1 32-bit unfortunately.

  • MS - (Win8.1) your processor does not support PrefetchW?

    OK, in 2012, many windows users have been attracted to try the new Windows 8.

    on a desktop Dell Pentium 4 2005, I installed windows8 pro x 64.

    and it has worked pretty well so far.

    now in 2014, I hear it takes to continue to support an upgrade to Windows 8.1?

    the problem is that Microsoft has added new restrictions of hardware to Windows 8.1?

    both single-core and even some dual-core PC that turns Windows 8 successfully.

    they are now locked this mandatory upgrade for Windows 8.1?

    Here is my screenshot after trying to upgrade to Windows 8.1.

    as you can see my CPU does not support the "PrefetchW?

    There are no updates latest BIOS for this motherboard from 2005.

    This system supports Windows 8 with no problems.

    It's only "PrefetchW" which is lacking.

    all required components are there,

    so my question is this?

    What is the "end of support Drop-Dead?

    for those of us who "can not put" because of "these new restrictions of material.

    at this Microsoft link.

    http://support.Microsoft.com/GP/lifecycle-Windows81-FAQ

    It is said: " Why do you require Windows 8 customers switch to Windows 8.1". ".

    and this statement is made.

    "Windows 8.1 does not any hardware requirements compared to Windows 7 or Windows 8".

    of course, this statement by Microsoft is in error?

    This particular PC currently dual-boots Windows 7 Ultimate edition and Windows 8 pro.

    None of these 2 Windows OS need "PrefetchW.

    but I know that this requirement will not change.

    Once again what is the 'final date' that Windows 8 will receive support.

    on a system where Microsoft prevented any future updated.

    Thank you.

    The 'Official' date posted the C/net awhile back was in January 2016, or upgrade you to Windows 8.1 by then or not many updates to security. so by then you'll have to upgrade or lose these monthly updates.

  • your processor does not support long mode. use a 32-bit Vmware Data Recovery distribution

    Hi all

    When I tried to start VM in Vmware Data recovery, her gives me error as

    "your cpu does not support long mode. use a 32-bit distribution"

    I tried searching for the 32-bit version of data recovery, but not able to find out.

    Help, please

    Kind regards

    Selim Desai

    You can add a 64-bit host to a virtualized session of ESXi. The ability of VT is not transmitted to a guest operating system.

  • Driver Intel management engine interface not supported

    I use HP2000-2116TU laptop, installed with WINDOWS (32 bit) operating system 8.1. When I try to install the driver Intel management engine interface, downloaded from the hp Web page, it says that it is incompitable with the system. When I check the Device Manager, it shows pci communications driver is missing. However, driver bluetooth, preferred for my system in HP Web page also is incompitable with WINDOWS 8.1 operating system.

    Please give me a solution for this problem.

    Details of the problem:

    1 PCI device:

    The drivers for this device are not installed. (Code 28)

    Hardware ID:

    PCI\VEN_10EC & DEV_5229 & SUBSYS_1858103C & REV_01
    PCI\VEN_10EC & DEV_5229 & SUBSYS_1858103C
    PCI\VEN_10EC & DEV_5229 & CC_FF0000
    PCI\VEN_10EC & DEV_5229 & CC_FF00

    Compitable ids:

    PCI\VEN_10EC & DEV_5229 & REV_01
    PCI\VEN_10EC & DEV_5229
    PCI\VEN_10EC & CC_FF0000
    PCI\VEN_10EC & CC_FF00
    PCI\VEN_10EC
    PCI\CC_FF0000
    PCI\CC_FF00

    Hello:

    It's the driver who interested, if unfortunately, I don't know why it does not work.

    Try to force the installation...

    Download and run the file again.

    Now, go to Device Manager and click the comms controller simple pci who need the driver.

    Click the driver tab.  Click on set to update driver. Select her browse my computer for driver software method, then at the bottom of the window, let him choose from a list of drivers for devices on my computer.

    Click on disk and navigate to the folder of the driver that was created when you ran the file.

    That will be located in C:\SWSetup\sp58464\Drivers\MEI\HECI\and, select the device Intel(r) Management Engine Interface in the list and see if the pilot goes like this.

  • my processor is not supported by silverlight whot can I do? __

    Silverlight

    Try these Forums:
    http://Silverlight.NET/forums/

    BTW, at least more information that you provide to us.

    Thank you. TaurArian [MVP] 2005-2010 - Update Services

  • ATI Catalyst Control Center simplified view do not support active graphic processor

    When I start the CCC, I get "features in the ATI Catalyst Control Center basic view do not support active graphic processor".

    I'm using ATI (not Intel).

    Driver is showing only: Version 8.633.0.0
    ATI Mobility FireGL V5700

    pci\ven_1002 & dev_9591 & subsys_212717aa

    System BIOS: 3.11 (2009-11-19)

    W500 4058-CTO on WinXP

    Uninstall-reinstall CCC and or the driver does not help. How can I fix CCC?

    Thank you

    Rick

    Now corrected to my laptop an error of ATI Catalyst Control Center.

    I had given up the uninstall/reinstall and register pluck and sweep, so I ran Intel graphics all the time.

    I voted against reinstall .NET 3.5, 3.0, 2.0... as I didn't aggravate and lose even more time, since I have a working machine.

    The other day the matrix Driver Lenovo had a video update.

    V8.712 - 100302 b - 097094C

    Applying this version fixes my ATI Catalyst Control Center.

    If this will help someone in the future, here's my ATI Catalyst install Manager report Journal of Installation:

    Hardware information
    Name ATI Radeon Graphics Processor
    Manufacturer ATI Technologies Inc.
    Device ID 0 x 9591
    Vendor ID 0 x 1002
    Code of the class 0 x 030000
    Revision ID 0x00
    ID subsystem 0 x 2127
    Subsystem vendor ID 0x17aa

    Existing packages

    Packages for installation
    Catalyst Control Center
    Final status: success
    Version of the article: 2010.0302.2233.40412
    Size: 150 MB

    ATI Catalyst Install Manager
    Final status: success
    Version of the article: 3.0.765.0
    Size: 20 MB

    ATI Display Driver
    Final status: success
    Version of the article: 8.712.0.0000
    Size: 40 MB

    Microsoft .NET Framework Version 2.0
    Final status: success
    Version of the item: 2.0.50727.42
    Size: 22 MB

    Microsoft Visual C++ 2008 SP1 Redistributable
    Final status: success
    Version of article: 9.0.30729.4148
    Size: 6 MB

    Now, that brings me to the initial problem of refresh of the external monitor around rate not exceeding is not 60 Hz. (subject for another thread)...

    http://forums.Lenovo.com/T5/W-series-ThinkPad-Laptops/W500-external-monitor-refresh-rate-above-60Hz/...

  • ESXi 4 on Asus P6T SE with Intel Pro/100 S - adapter not supported?

    I saw some of these threads, but none have quite answer my question. I set up an office whitebox with plans to use it for virtualization with VMWare ESXi 4. The Office currently has a motherboard Asus P6T SE and the following specifications:

    • Intel LGA1366 platform

    • Intel® X 58 / ICH10R chipset

    • Intel I-920

    • 6 GB Kingston memory

    • Intel Pro/100 S network map.

    Installation seems to be going along great, but the trainwrecks right then the detection of network card saying "not supported network adapter. I read on the HCL\HCG for VMWare ESXi4 and I found that the onboard Realtek NIC is not supported. I bought a Linksys NIC, who did not, and then as a last attempt got a card Intel Pro/100 S, thinking that this stripped NIC would pass, but unfortunately none have worked. I have of course buying an Intel Pro/1000 card, but I think that if the Pro/100 will not work, a Pro/1000 won't work either.

    I tried to change the PCI to IDE to AHCI and activation settings and disabling the NETWORK interface integrated without success. I don't know what else to try, and I rather wouldn't VMWare Server because it seems like a waste of resources to put Windows on this thing.

    I ran before ESXi on Dell servers and I an ESX cluster at work that I built on two HP DL280 G6s, but I don't want the noise of a complete server in my house.

    Anyone got past this problem yet?

    Hello

    Check carefully this message to get a network card compatible esxi 4.

    In esxi installation stage, you need a compatible network card that is present on the host computer. Is a good idea to disable all NICs not supported, then just left active management (s).

    Hope this helps

    Best wishes / Saludos.

    Pablo

    Please consider to assign all useful or correct answer. Thank you!! - Por favor considered premiar any respuesta correcta o util. ¡¡MUCHAS gracias!

    Virtually noob blog

  • Presario CQ5320F: upgrade the processor 'not supported CPU.

    I was looking to upgrade the CPU on my Presario CQ5320F, for most popular processors in the list on the HP site for my computer. So I bought one, actually two, of the AMD Phenom II X 4 processors (Deneb). When I installed it, them, I get a message saying that the CPU is not supported. I don't know how I got it done, but it does not work. I bought two of the processors by mistake. The code on the processors that I bought is "HDZ955FBK4DGM", which seems to be the processor in the list of compatible processors on the HP website.

    -AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (Deneb)

    -AMD Phenom II X 3 Triple-Core (Heka) 7xx/7xxe

    -AMD Phenom II X 2 5xx (Callisto)

    -II AMD Athlon X 4 6xx/6xxe (undactylopodite)

    -AMD Athlon II X 3 4xx/4xxe (Rana)

    -AMD Athlon II X 2 2xx/2xxe (Regor)

    -AMD Sempron 1xx (Sargas)

    I'd appreciate any help.

    Thanks in advance,

    nashville_bill

    Thank you for giving me the answer. I guess it's time to look for a new motherboard now.

    No doubt, it would be nice if someone let HP know this, so people like me would not try to use this processor with the motherboard.

  • HP Pavilion dv4t-4100: Intel centrino advanced-N 6230 - module id wireless (702) not supported when restarting wlan module

    I wanted my laptop supports wifi 5 GHz networks so I can get faster speeds of the internet. After having carefully read as published in below url and pasted below, page support manuals I buy centrino 6230 and to my surprise, I advanced receieved the message unsupported.

    http://h10032.www1.HP.com/CTG/manual/c02987282

    This manual indicates that N6230 is supported in WLAN module. However, when I reboot post install, I got WLAN unsupported (702) message and forced me to go back to my old WLAN card. Also I have the i5 processor on my laptop and the bios to F.28. I refer whitelist and so on. But why the WLAN as supported in the repair manual mentioned when it does not support and al.

    I have a surprise here as my number of product points me

    HP Pavilion dv4t-4100 (LW934AV)

    and my computer information as computer shows dm4 laptop and if I check on hp support site dm4 - x 100 series comes, so finally that is my model laptop and al? DM4 or dv4?

    Hello

    The short answer is: your REAL machine only supports a list of cards wireless on the following link:

    http://PartSurfer.HP.com/search.aspx?SearchText=LW934AV

    (Scroll to the bottom, no card AC).

    Kind regards.

  • I have a digital signature, but when trying to install its software, it says "(Package of Installation not supported by the processor - it comes to i3)?

    I have a digital signature, but when trying to install its software, it says "(Package of Installation not supported by the processor - it comes to i3)?

    Hi Richard,

    1. what software are you trying to install?

    2 are. what digital signature you referring?

    3. What is the brand and model of the computer?

    4. you made any hardware or software comes to the computer before the show?

    Also check out the links for more information:

    What is a digital signature?

    http://Windows.Microsoft.com/en-us/Windows7/what-is-a-digital-signature

    How can I decide that drivers are safe to install?

    http://Windows.Microsoft.com/en-us/Windows7/how-can-i-decide-which-drivers-are-safe-to-install

    Please write to us with the exact details of the question and the answers to the questions above so that we can help you further.

  • I have new Dell Inspiron 15 7000 2-in-1 graphics card = Intel HD Graphics 520 only see a blue screen in the develop module is the graphics card not supported?

    I just new Dell Inspiron 15 7000 for Lightroom on road.

    Graphics Intel HD Graphics 520 =

    Only get blue screen to develop the module

    This card is not supported?

    It works as Lightroom uses is no longer your GPU for rendering of image in the develop module.

    Please see the FAQ and the troubleshooting of Adobe Lightroom GPU

    ~ Assani

  • Is there a version of the Intel to HP Photosmart software menu like Lion will not support existing software

    This version of the Hp Photsmart Menu is Power Pc Version and Lion will not support this type of software.

    I down loaded the latest drivers, and there is no change in the type of process, as that displayed in the activity monitor. I am currently Mac OS 10.6.8. It's still a Rosetta Apps, as stated in this article —-the-right-way/103130?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+cultofmac%2FbFow+%28Cult+of+Mac%29 http://www.cultofmac.com/how-to-prepare-your-mac-for-lion-

    After installation of Lion, all products worked and HP also had an update today.

Maybe you are looking for

  • iMovie does not more free?

    I just had to restore my iPhone 6s as a new phone and just load it again. I went to download iMovie and it seems not to be free more for iOS products. Also, I can't find what it previously purchased on the App Store. Since Apple has changed the way a

  • Is Satellite X L855-10 supports a Bay for a second HARD disk drive

    10 - L855 X have an empty slot to add the SSD drive, without removing the current HARD disk?

  • Desktop software for want 4500

    When I tried to scan something I clicked on 4500 want icon on my desktop. This gave me the choice to install a new printer or add more software. Previously, it would bring utilities to analyze and see what's printing. I was able to scan using the Win

  • R013a-23 HP All In One: upgrading memory

    Hi I want to upgrade my memory here, but do not know what is compatible. Can anyone help please? Soon l HP all in one 23-r013a 64-bit supports 16GB (2 x 8 GB) DDR3 SO DIMM 204 pin socket PC3 12800 1600 Mhz 14900 1866 Mhz PC3

  • Pavilion G7-1101sa: Ram upgrade

    My laptop starts to run a bit slow so I thought I should update my Ram, already, I have 4 GB of DDR3 ram installed but when I checked my laptop specs it says "Expandable to 4 GB of DDR3 memory" which confused me a bit so I decided to do some research