VPN site to Site, LRT214, Windows network active directory DNS, WINS, and DHCP

Similar Questions

• Windows 7 activation key has expired, and request a new product key.

  original title: activation key for windows 7

  my windows 7 activation code has expired, and request a new product key. It is telling that windows is not genuine.

  How to activate my windows without having to buy a new key

  Product keys do not expire.  Another problem occurred.

  Download the Microsoft Genuine Advantage Diagnostic tool of
  http://go.Microsoft.com/fwlink/?LinkId=56062

  Open the Microsoft Genuine Advantage diagnostic tool. Click Run, and then click on continue.

  The tool will scan your computer and then give you a summary of your computer settings and the details of the system that will help anyone here diagnose the problem.

  To copy your results to the Clipboard, click on copy.

  Paste the report into your answer here.

• Active Directory user confidence and target user Recon fails for an ORGANIZATIONAL unit

  Hello

  Active Directory trusted user and target user Recon fails for single ORGANIZATIONAL unit and others to run correctly.

  We get the "the server does not support the requested critical extension.

  I read, we must use the entrance of page size of the definition of Lookup.Configuraiton.ActiveDirectory or Lookup.Configuraiton.ActiveDirectory.Trusted search for settting granular level.

  I looked into this research and got the PageSize as 1000. So, does that mean? How to use the pagesize?

  It's the user Trusted Recon Brio ST AD

  

  Thank you

  After increasing the value of pagesize, jobs are working well.

• Windows 8 "Active Directory Domain Services is currently unavailable"

  I've lost the ability to print on my printer HP 1210 of windows 8.

  The "Active Directory Domain Services is currently unavailable" message.

  I tried to correct by removing the printer via the control panel and then adding the printer, but no luck.

  The printer works, the computer works, but I cannot print from the computer. Help!

  Hi, Lucille.

  Try to access the print administrator servers. To troubleshoot the device, try the following steps.

  1. click on start, click on devices and printers.
  2. right click on the item of the printer and click on solve.
   
  Installation of control network - go to control panel, printers and click Add new printer. Click network printer, and then click Browse for printer. »
   
  What application you are printing from?  Uninstall/reinstall the application - e.g., Word, Adobe, etc...

• How the Network Server 2003 Active Directory, DNS, DHCP with other virtual machines

  Hi ~

  I am trying to create a network within the workstation test environment. I did research on everyday and can't find a direct answer. I want to do is use the Server 2003 functions and create my own private network with the 2 other VMS XP Active Directory domain controller. I want both of these XP machines to be able to log into the domain of the 2003 server. I have never used or learned 2003 server, that's why I do this.

  What do I need to create a custom network? can I use bridged, host-only, nat? Stop the service DHCP from Vmware workstation?

  What is your host operating system and how to get its IP address? What is the result of: ipconfig/all in Windows or Linux ifconfig-a?

  Disable the firewall during installation.

  I don't think that the network connection is all that matters (if you care on the internet or a local area network LAN) for guests, while they are the same. I always use filled but the only thing that really counts, IMHO, is that the host, guests of the XP and W2003 prompt are all on the same subnet and the server has a static IP address.

  I almost always use open for all guests. I put all the guests for static IP addresses on the same subnet as the host. I put the DNS server for XP clients to the IP address of the host to W2003. I have install the DNS role on W2003 server and then install the role of domain controller (AD), with the help of a domain name like lousdomain.local. Then you should be able to join XP guests to this area.

  It's all exactly the same as if it was real machines.

  My default installation is filled with the IP host is defined on 10.0.3.5, a gateway of 10.0.3.1 (my ADSL router), my server W2003 (or W2008) the 10.0.3.4 value and guests XP, the value to something like 10.0.3.6, 10.0.3.7 etc. Again, once again, is not the same as little care as long as they are on the same subnet.

  What are the errors you get when you try to set up?

  What you get from ipconfig/all on each of the guests?

  Lou

• How to migrate from windows 2003 to windows 2008 with all the work of GPO active directory, DNS, without problem?

  Hello...

  I have a problem with windows 2003 to windows 2008 migration. I have try several round of flyway of google and youtube, but he is still fail.
  in the first,.
  I have HP Proliant server with windows server 2003. So I restore the backup to a different server HP Proliant wih same hardware specification. I've been back up the System State and the drive C with NTBackup. After I restored on HP Proliant, that I want to migrate, the DNS server is timeout request and the client cannot join domain. I was surprised, because the backup and the material is the same, but it can work as well as the original server.
  in the second case,
  I have windows server 2003 in HP Proliant server and it works well. I'm doing a replication on this server to another windows 2003 server in an another HP Proliant and works of good replication (another user can join the domain). After, I have installed windows server 2008 to another PC and make the replication of the duplication of windows 2003. And this success to replicate, but not on the DNS (DNS query time-out).
  I have the despair to try migrating Windows 2003 and 2008 because he is still fail in DNS. Another way to migrate to Windows 2003 and 2008 with DNS, AD and GPO work?

  Hello

  The question you posted would be better suited to the TechNet forum where IT professional will deal with your question.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Best practices for active directory / dns / hostname configuration

  Scenario:

  DNS servers are not integrated with active directory and all hosts of VMS esx virtual environment have host names on the dns comain called inside.contoso.com - such as an esx server called "esx1.inside.contoso.com" and a virtual machine called "linuxvm1.inside.contoso.com".

  We have set up a domain active directory to manage authentication for the vcenter server.  This domain active directory must be a subdomain of the existing - such as dns domain

  'addomain.inside.contoso.com '.

  What is recommended in this scenario?

  In addition, the vcenter server should be designated as a member of the domain such as "vcenter1.addomain.inside.contoso.com".

  or should it be named 'vcenter1.inside.contoso.com '.

  We have currently a scerario, where domain active directory is not a subdomain - i.e. the AD domain is nwtraders.local and dns domain is "inside.contoso.com" when the vcenter server is added to the ad domain, its host name is "vcenter1.nwtraders.local".   When vmware customers to computers outside the domain of advertising then connect to this server vcenter, problems result from this AD/DNS/hostname design and some features of the vmware client do not work correctly as a result, unless the client vmware runs on a computer joined to the domain, nwtraders.local, which is not possible for all computers.

  Any comments or thoughts appreciated - thank you

  You have an AD domain that is used for your server vcenter only - which is pretty safe. Ms. do guides on building server roles such as domain controllers - you may wish to consider looking at these.

  Regarding the DNS to use - there is no right or wrong answer, this is which option is the best solution for your organization, given the technical, commercial, geographical or political demands.

• Windows vista activation problem product ID and Java (0xc0000005) fatal error after installation of windows vista format.

  Original title: try to put wrong question ID problem!

  Due to problems of Java, I formatted and made a new installation.  My Vista Home Premium says its active.  When I try to put my product id was not found. When I try to leave microsoft to find that they can't pick up my computer and I can't enter by hand, he said its incorrect.   When I try to ask online chat, I cut that they deal with activation problems.  It is activated, I can't get the Web site recognize my product id, so I can post for help?  The world is - that sound familiar at all?

  I have fatal routine Java errors when I play a game Runescape.  I'd appreciate any help anyone could give me. Thank you

  A fatal error has been detected by Java runtime environment:
  #
  # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc = 0x6d884dca, pid = 3032, tid = 2976
  #
  # Version JRE: 6.0_30 - b12
  # Java VM: Java hotspot Client VM (20, 5 - b03 in mixed mode, sharing windows - x 86)
  # Problematic frame:
  # V [jvm.dll + 0x94dca]
  #
  # If you want to submit a bug report, please visit:
  # http://java.sun.com/webapps/bugreport/crash.jsp
  #

  Hi Verisetti,

  Have you installed security software after formatting windows?

  If so, you can uninstall the security software temporarily and check if you receive the access violation error.

  If the uninstallation of security software solves the problem, you may need to configure the settings of the software of safety accordingly. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you install the security software after the trial.

  What about Windows vista product ID, you can try to validate Windows and check if it helps.

  For more information, see the following articles:

  What is the validation, and how does it work?

  Genuine Windows: Frequently asked questions

• Windows xp activation time has expired and I cannot read the product key and can not connect to my computer? What should I do

  an error message appears on the screen. He said: my activation for windows xp time has expired. It won't let me even log into my computer. What should I do?

  A little late to ask now?

  You should still be able to log in Mode safe to backup your data.

  You should not use your manufacturer to reformat/reinstall your system recovery system - if you do not have the disk and the recovery partition is not always work, then contact the manufacturer and see if you can order a set of disks on their part. You may also be able to order a series of a reputable third party provider, such as the the restaurant - disks.com

• CDFS driver sys disabled in windows 7. activation procedure. running win 7 ultimate

  CDFS driver sys disabled in windows 7.  activation procedure.  running win 7 ultimate.  This happened only a few days ago. now cannot run what whether on cd dvd. does not even recognize a disc in the drive. real mess

  Hello

  1. What is the accurate and complete error message you get?

  2. don't you make changes to the computer before the show?

  Method 1

  Enable the CD/DVD-ROM drive in the Device Manager.
  a. Click Start, type devmgmt.msc and press to enter.
  b. expand the CD/DVD ROM drives point.
  c. right-click on the sub element and click Activate.
  d. restart the computer and check the result.

  Method 2
  I suggest you try the steps from the following link:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

• my windows 7 activation code has expired, and request a new product key. It is telling that windows is not genuine.

  active Windows code has rubbed off of my laptop and after reinstallation comp after my windows fatal error has expired and must activate windows genuine product key? PLEASE HELP ME.

  Toshiba satalite product

  Recovery of your computer (Windows) using "Recovery Partition" of the Manufacture

  To get there, start your computer and then pressing the appropriate function key. It can be either F1, F2, F9, F10, F11, F12, DEL or tab key. Check the manual for your make and model.

  If your hard drive has failed, you must contact the manufacturer support team and request a "recovery disc" which allows to reinstall Windows 7.

  How access/start the process of recovery of the manufactures listed below.

  Toshiba: Press on F12 or the value 0 (zero) key on the top of the keyboard (not the zero on the numeric keypad key)
  and at the same time, press the button power once to turn on your laptop.
  When the Toshiba screen appears; release the 0 key.
  References: http://www.mytoshiba.com.au/support/items/faq/71
  http://forums.Toshiba.com/T5/system-recovery-and-recovery/how-to-perform-system-recovery-Windows-7/Ta-p/279643

  Windows 7 - location of the Partition Recovery and information.
  "Configurations of drive partitions using the BIOS has recommended.
  Note: Check the diagrams of this article
  http://TechNet.Microsoft.com/en-us/library/dd744364%28WS.10%29.aspx

  J W Stuart: http://www.pagestart.com

• search for Windows 'user' Active Directory

  the system will have many users, test records must be saved in the c:\Documents and Settings\\Application Data\Pacing FAT32\

  How can I dynamically determine this path for different users?

  I love the vi "To get the system directory" found in the subpalette of constant file of the file IO palette.  It could be LV2009 only.

  

  Note that the Application Data folder is hidden by default in win7.  In win7 x 64 the result is "C:\Users\\AppData\Local\Pacing System\" under XP, there "C:\Documents and Settings\Settings\Application Data\Pacing FAT32\"

  Approach to the Yamaeda registry gives me "C:\Users\\AppData\Roaming" questioning "LOCALAPPDATA" or "USERPROFILE" keys are also close to what you want.  If XP does not have these keys, you can also call a command line and environment variable %UserProfile% query.

  @Phil: I had trouble with the "Default data directory" vi before (yesterday actually).  It depends on a setting options in labview.  (Options > paths), I found that when I change this path in the options to use the system directory (uncheck the "use default" checkbox, click the exclamation mark, click on replace, then OK out of options), it gets resets the default restart labview, even if it appears in Labview.ini. This only happens if you use the system-specific path.  It seems to be an old problem:http://forums.ni.com/t5/LabVIEW/Custom-default-data-directory-path-reverts-to-Labview-default/m-p/36...

• VCAC 6.0.1 issues with setting Active directory on tenants and pointers for install

  Hello

  So I finished the installation of the VCAC 6.0.1 (published on 13-02-14) and all its components in my test harness.  I am able to connect using [email protected] no problem.  I wanted to give my ad 'Domain Admins' group to the default tenant rights.  I ran the test on connectivity to my AD domain successfully and added to the group Admins in the field of infrastructure and tenant administration Articles and updated.  After review of the tenant defaults remained all (I saw problems with AD administrators you do not add save but remove the "alias" solved this problem.)  When I logout of the VCAC and tried to log in using one of my accounts of Member of the domain admin ([email protected]) seems not to authenticate.  I tried to reboot the device identity thinking maybe it was an AD replication or sync problem but no luck.

  I tried to created a second tenant and populated with the same parameters except of course the name of the tenant by default but not having also no luck there either.  Include some screenshots showing the configurations, but it is really strange behavior and don't know if it's just because it is such a release again or I'm doing something wrong... any suggestions on the place where to even try to troubleshoot it would be appreciated.  I even went so far as to restart the 3 servers, thinking it was a synchronization delay or something but still the same issue

  Note aside a few things I learned the hard way on this facility where people run it for the first time

  - Do not install .net 4.5.1 on your server of iaas.  I had to uninstall it and download version 4.5, included in the page install a device vcac https://your-vcac-appliance server: 5480/Installer /.

  -If your tenant administrator accounts save after hitting the update try to remove the name of the alias for your domain as it seemed to solve my problem (and native AD did not work at all for me at least)

  - Found this excellent article of Kendrick Coleman, which is a step by step guide for installation complete... very thanks and well presented.  Also has links to some useful tools like the AD Explorer to help with DN names as well as a PS script to prepare your server, IAAS, which has been a lifeline for http://www.kendrickcoleman.com/index.php/Tech-Blog/how-to-install-vcloud-automation-center-vcac-60-part-1-identity-appliance.html

  Well, what I thought about it.  It turns out that delete and then re-create the identity store for the tenant to vsphere.local (the default when first created), I was finally able to include the correct information to AD, then a final reboot of the environment and I was able to authenticate to AD.  Also for those of you who did not default that there no store identity for the first tenant then please make sure that create you an and save yourself a lot of headaches and frustration :-)

• 2008 R2 VM BSOD after installing Active Directory

  Hello

  The situation is that I create a clone bound my 2008 R2 VM model and everything works fine until I have install Active Directory / DNS, VM, and DCPROMO and then restart, after which I get a BSOD on the guest.  If I install AD/DNS, but are NOT DCPROMO, then the virtual machine is fine!  The machine log file is attached.

  I have MANY other machines clones related to the image of the master and they seem to all work very well, but I seem to be unable to create a new linked clone and install AD on it

  Host operating system is 2012 R2 Datacenter

  Any ideas?

  Have it tri - basically, it appeared the AD database has been damaged and I had to run esentutl against it after having finally managed to get in DSRM.

  The strange thing and the reason why I am connected to this question in the VMWare Workstation forum is that it was an entirely new domain controller for a brand new forest/domain and each time I have rebuilt (at least 10-15 times) and had never seen this before on a completely new domain in a new forest/domain controller is the same thing.

  Thanks for listening

• Windows Active Directory

  Can I use Radius AAA on an ASA 5505 to block outbound access by user name of users in a group? Thank you

  Hello

  I think you might be interested on the verification of the new feature of 8,4 ASA: Firewall identity

  Identity of firewall

  Generally, a firewall is not aware of the identity of the user and, therefore, impossible to implement identity-based security policies. The identity of the ASA firewall provides more granular control of access based on the identity of users. You can configure access rules and security policies based on the user and groups rather than name names by source IP addresses. The ASA applies security policies based on an association of IP addresses to the Windows Active Directory connection information and reports on the events based on the names of mapped instead of IP addresses of network users. Identity firewall integrates with the Active Directory window in conjunction with an external Agent of Active Directory (AD) that provides the mapping of the real identity. The ASA uses Windows Active Directory as a source to retrieve the identity information of the current user for specific IP addresses. In a company, some users log on the network using other authentication mechanisms, such as authentication with a web portal (passage of proxy) or by using a VPN. You can configure the firewall of identity to allow these types of identity-based authentication under access policies. We introduced or modified the following commands: user-identity enable user-default-domain identity, user-identity domain, logout-probe user-identity, user-identity inactive-user-timer, user-identity poll-import-user-group-timer, user-identity netbios-response-fail action, user-identity user-not-found, user-identity ad-agent-down action, user-identity action mac-address-mismatch, user-identity domain-controller-down action, user-identity ad-agent active-user-database, user-identity ad-agent hello-timer, user-identity ad-aaa-server agent, user-identity update user import-, user-identity static user, ad-agent-mode, dns domain-lookup, dns poll-timer , dns expire-entry-timer, user of the object-group, show the identity of the user, see the dns, Configure clear - user identity, clear dns, debug the identity of the user agent test ad-aaa-Server.

  Please find the Configuration Guide Chapter referring to the firewall attached identity.

  Hope that does you in the right direction.

  Kind regards.