warnings to leak memory for the elements in a form

Similar Questions

• Will be the leak memory for the queue when it is used in producer and mode of consumption data acquisition transfer different size table.

  In data acquisition, I use a loop to query the data from the hardware, another loop to receive the data from query sent by queue loop.

  Each time the size of the transferred data matrix is perhaps not the same, so the system can assign different table size and recycle frequently.

  It cost memory leak. Or it will slow down the performance, given that the size of the array is not fixed, so everytime need to create a new array of size.

  Any suggestion or the best method.

  If I understand your description, your DAQ loop acquires data with the parameter of the function of reading-'1 ' for reading at the DAQmx samples. This translates into different picture sizes.

  Passage of these tables directly to a queue is valid and she didn't mind important in performance (at least AFAIK) and it certainly does not leak memory.

  So the question is more or less:

  It is valid that the consumer receives sizes different picture for analysis? How your consumer manages these tables?

  hope this helps,

  Norbert

• Leak memory for the El Capitan mail

  Hello

  I installed el captain and discovered that using mail instantly crashes my computer.

  I took it to the apple store and they don't have any advice except wait for the fix to update operating software.

  I found some other threads about uninstalling 3rs advantage software mail, but that does not apply

  They mention also change some e-mail settings, but they don't work that my computer is frozen instantly if I run the mail application

  Any other advice?

  It is a broad topic, how could apple perhaps launched an operating system with this major fault, and why have they not all their team work to remedy immediately?

  I have my entire office tied up in this email, seriously apple job, he meets

  bump

• 3097 memory failure allocating memory for the Variables

  Hello - have an old Lenovo tablet of 3 year with Windows XP. Its been performing very well. I get a message that appears randomly who says:

  3097 memory failure allocating memory for the Variables

  installedapp872 = StrSub (Apps, Start, stop-stop)

  WinBatch 32 2000

  WIL Version: 3.0cbv

  has ran a chdsk

  Reinstall the memory.

  Found nothing on Google about this message.

  I appreciate your help.

  Try R.clicking my computer, properties, advanced, performance, swap file,.

  Click Change button, with C: drive selected, the value to "let the system handle",

  2 X game, close, restart the pc.

  Also, try http://oca.microsoft.com/en/windiag.asp

  Download & run the test memory microsoft...

• recommendation of the memory for the guest operating system

  Hi guys,.

  I need some advice

  I have a pile of vsphere 5 made of 2 servers on each server that I have on 5 VM

  (1) domain contoller 2008 standard edition + dhcp + dns

  2) exchange 2010

  (3) file server

  (4) primavera

  My question is what is the recommended memory and cpu for these VM configuration? I'm a bit confused

  What happens if I don't set up the limits and booking hotel and leave all default? What is the point of the week in this configuration? If I leave all default each VM does not use memory a cpu as it needs?

  Thank you specify in advance

  To add the tips of memory... Many people allocates memory for the virtual machines that will never be used, and ultimately you consume the memory of your host much faster than necessary. Start low when allocating memory to a virtual computer. Adding memory is simple to make, after you have collected on the functioning of your host performance data. The Performance tab will show you what is happening.

  Mike

• FAQ as a search scope for the elements of literature

  Sort of create a FAQ as a search scope for the elements of literature?  The idea is that the site visitors would be able to choose a category, subcategory of items of literature before being presented with the list of items in that category or subcategory.

  Not with the system in the State.

  You can include items from the media module manually in a response from the FAQ (manual add to FAQ with links customized wysisyg) or past the {module_literature, c, insertclassificationidhere,} call in the tag content / source.

  Another option would be to create a HTML page containing tags downloads media (filtering on a classification) of block elements and then manipulate the presentation with javascript. Example would be the tabs or accordion layout each element in the appropriate media downloads by category.

  You can also create pages that have done the same and then pull them in an element of presentation with Ajax calls in another page.

• Permutation of loaded xml of Images for the elements in the scene?

  Hello!

  I have a quick question on xml loaded images.

  You can add/attach/swap images for the elements in your scene?

  I would like to manually animate a movieclip using the interpolation of keyframes and the movement. For example, to have a movieclip FLY! on the screen! lol but I want it to be one that has been dynamically loaded image.

  I can't find how to replace an image on a movieclip from a dynamically loaded image.
  Is it still possible?

  Thanks heaps for your time that you guys!

  If the original image is the only object in the movieclip, you can use removeChildAt (0) to get rid of it and use addChild (your_new_image) to replace it.

• Addition of the attribute of the element of tabular form filling

  Hi all
  
  I have the following in the attribute of the element of tabular form to make uppercase data once it is added. I found a problem where users are paste data in the field, and he added a space at the end of the data. Therefore, I would like to see if I can cut the data while making it uppercase. Can someone tell me how I can change this to mow all the spaces as well?
  
  OnChange = "This.Value = This.Value.toUpperCase (); »
  
  Thank you
  Mike

  Mike,

  Replace it with

  this.value.replace(/^\s+|\s+$/g,'').toUpperCase();
  

  Thank you
  Manish

• leak memory with the callback function

  Hello

  I'm pretty new on LabWindows and library ninety, I worked mainly with LabVIEW.

  I am trying to create a basic c++ client (no GUI) that sets up subscriptions to several network publication of a PXI DAQ data variables.

  The data for each variable is sent in a cluster and contains different types of data with a 2D array large int16 for the acquired data (average size of array is 100 k in total, and the average time between the data being sent is 10ms). I have an average of 10 of these variables DAQ.

  I'm passing the same callback function as an argument to all of these subscriptions (CNVCreateSubcription).

  He reads all the correct data, but I have a problem is that I have a memory leak in the callback function in the CNVCreateSubscription.

  I have reduced the line of code one and found the function that actually causes the memory leak, it's a CNVGetStructFields(). At this point in the program data has not yet been adopted for the variables of the customers.

  It is a simplified version of the callback function, where I just unzip the cluster and get data (showing only a field in the cluster in the example, showing also doesn't not the decleration).

  The function is passed in the function to subscribe, as follows:

  public static void CNVCALLBACK SubscriberCallback(void * handle, CNVData data, void * callbackData);

  CNVCreateSubscriber (url.c_str (), SubscriberCallback, NULL, 0, CNVWaitForever, 0, & Subscriber);

  public static void CNVCALLBACK SubscriberCallback(void * handle, CNVData data, void * callbackData)
  {

  int16_t daqValue [100000];

  unsigned long int nDims;
  unsigned long int daqDims [2];
  CNVData fields [1];
  Type CNVDataType;
  unsigned short int numFields;

  CNVGetDataType (data, & type, &nDims);)
  CNVGetNumberOfStructFields (data, & numFields);
  CNVGetStructFields (data, fields, numFields); //<-------HERE is="" the="" problem,="" i="" can="" comment="" out="" the="" code="" after="" this="" point="" and="" it="" still="" causes="" a="" memory="">

  CNVGetDataType (fields [0], & type, &nDims);)

  CNVGetArrayDataDimensions (fields [0], nDims, acqDims);
  CNVGetArrayDataValue (fields [0], type, daqValue, daqDims [0] * daqDims [1]);

  CNVDisposeData (data);

  The average settings, I use all my memory systems (4 GB) in time.

  My question is, all else have experienced this and what might be the problem/solution to this?

  Thank you.

  I see that you disable only handle memory (data), but not the memory of the structure; Therefore, before calling CNVDispose (data) you should have something like

  While (numFields > 0)
  CNVDisposeData (fields [-numFields]);

• Leak memory in the rings image under Linux

  Hi all

  I have a very serious problem, that I didn't have in the previous version of my app and one of the only addition I've done is to use the rings of the image. The app uses 6 MB more every minute. If I remove the rings, it stops. It could be a bad lead, so I'm writing a test case, but is there that a list of memory identified leaking somewhere?

  Thank you.

  Hello William,.

  I've studied this and confirmed what you see. There is indeed a very serious leak in the Linux module. I'm really sorry for the inconvenience that was done to you. We have created an internal bug reported for this question (414435) and it will be fixed soon.

  To answer your last question, it is not yet a more recent version of Linux than 2010, but there will be an update to the Linux module later this year, and it will include this fix.

  I have not yet studied the issue with CanvasDrawPoly, but I'll do it soon.

  The error with anti-aliasing is expected since this feature has been added in 2012.

  Luis

• Leak memory in the routine of Winhttp 6.1 WinHttpSendRequest() on Windows 7

  I posted the following question in https://groups.google.com/forum/# microsoft.public.winhttp! Forum/Microsoft.public.WinHTTP with the subject 'leak memory in WinHttpSendRequest()'.

  I think that this function of WinHttpSendRequest() still leaks memory in Windows 7 (WinHttp 6.1), here is what I have:

  Platform: Windows 7 Enterprise (version 6.1 SP1) 64-bit platform.
  WinHttp: version 6.1.7601.17514.
  Visual Studio version: Microsoft Visual Studio Ultimate 2013, Version 12.0.31101.00 update 4.
  Memory tool leak detection: performance, using "private bytes".
  Symptom: With WinHttpSendRequest() call memory continue to increase even if it looks like a square, but the trend going upwards. Without calling WinHttpSendRequest, the trend is pretty much flat line, even if it looks like a square.

  Here's the code,
  ==============================

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you re-post your query on The MSDN Forums , because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?category=VisualStudio

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Is there an equivalent in Firefox for the element.style ['javaScript css_to_change']?

  I'm doing a site compatible for Firefox, but the element.style ['CSS_to_change'] doesn't seem to work (example: document.getElementById('element_ID').style [' - moz - transform "] ="rotate (90deg)"; must turn the item whose id is 'element_ID' at 90 degrees). It works in Google Chrome and I wonder if there is anything equivalent with it in Firefox...
  I'm sorry if I ask this question in the wrong place and I thank you in advance! Please let me know when you have an answer.

  Try this:

  document.getElementById('element_ID').style.setProperty('-moz-transform','rotate(90deg)','');

  javascript:void( document.getElementById('question').getElementsByTagName('IMG')[0].style.setProperty('-moz-transform','rotate(180deg)',''));
  

• Video memory for the A50 series

  Hello.

  I have a satellite a50-111 and I wonder if it is possible to change the amount of video memory to the maximum value possible.

  Below you will find the form reported video memory Panel - graphics:
  -----------------------------
  Minimum graphics memory: 15 MB
  Maximum graphics memory: 64 MB
  Used graphics memory: 18 MB
  -----------------------------

  I have 1 GB of RAM, and I wouldn't mind if the video card supports 64 MB of him all the time.

  Thank you.

  Hello
  Your machine has 16-64 MB shared memory with the system. This memory cannot be set to a specific amount, but is controlled at the level of software/hardware for maximum performance
  concerning

  Gandalfwhite

• Fingerprint memory for the LabVIEW 7.1 development system

  Hello

  I would like to know the size memory for LabVIEW 7.1 full development System.Both during the installtion and to develop applications later.

  If anyone can help. Thank you.

  There is no one answer for this, as this varies considerably.

  For what is on the disk, if my memory serves, the 7.x base takes a few hundred MB, but which could greatly inflate according to the modules and drivers you add.

  For the RAM, I believe than 7.0 used to identify approximately 20-50 MB immediately after loading, but this number then would also change a lot over time depending on what you are doing. Loading, editing and execution of code just regularly change the amount of RAM used.

  Why do you ask? Also, are you aware that 7.1 is relatively old now (came out 7 years ago)?

• leak memory in the dll with a function imaq

  Hello

  I'm writing a dll that uses the imaqImageToArray function.

  Of course this function allocates new memory whenever it converts an image, and as I convert 180 photos per second and shopuld program run for hours is quite a problem for me.

  The solution must of course be the free function (void * MyPointer). If I use malloc to allocate some random memory, instead of the imaqImageToArray, it works perfectly.

  However, when I call free() to free the memory allocated by the imaqImageToArray function, the LabView/dll-program crash.

  So I wonder what function the imaq functions allows you to allocate the memory and how I can get rid of him again. Is there another imaq-function?

  Thank you already!

  Greetings

  Sorry everyone for disturb you.

  I was just stupid... the answer is of course imaqDispose(void *object)

  Sorry again

  Thanks for the help