WebService invocation - variable @namespace errro

Similar Questions

• WebService call failed during the test adapter for oracle applications

  In SOA 11 g, when I test my application that uses Oracle Applications card it gives an error "Webservice invocation failed. The error stack is
  
  oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occurred when the link was invoked.
  Exception occurred during invocation of the JCA binding: "binding JCA execute of operation 'getDailyRatesAdpSelect' failed due to the reference: connection problem component binding JCA.".
  JCA Binding component is unable to create an outgoing connection of JCA (CCI).
  + OutboundR12:getDailyRatesAdp [getDailyRatesAdp_ptt::getDailyRatesAdpSelect (getDailyRatesAdpSelect_inputParameters, GlDailyRatesInterfaceCollection)]: the JCA Binding component was unable to establish an outgoing connection of JCA CCI due to the following problem: BINDING. JCA-12510 +.
  Location of JCA resource adapter error.
  Cannot find the adapter in JCA resources via the element of the binding .jca file
  
  The Binding of JCA component is unable to the adapter resources specified in the startup item: location = "jdbc/EI/R12.
  The reason is most likely to be
  
  + 1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or +.
  
  + 2) the "element in weblogic - ra.xml has not been defined in eis/jdbc/R12. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). +
  
  Please fix this and then restart the application server
  
  The same as xADataSourceName the value of the Data Source JNDI name, but still get this error.
  Specify the location of the ra.xml file - weblogic and steps to guide to solve this problem.
  
  Thank you
  Sadia

  Looks like the Oracle Application adapter is not running.
  Connect to the weblogic administration console on your left window, click on * "Deployments" *, and then click your right window, under summary of deployments, check the status of * "OracleAppsAdapter."
  It should be in Pavilion OK, so that it can reproduce and accepting applications.

  Thank you
  Vijay

• How to take the output of Webservices

  Hi all

  I'm new on JUST I want to know how we're going to take the response of webservices in variable flow to RL fo there is little more easily in the 7 X workflow, but I am facing problem here

  ENTRY:

  option of WebServices (literal value) I enter the WSDL url and calling the funtion there and in demand, I've been taking the value of the flow through var

  and passing to webservice

  < tem:EmployeeLogin > {$ process_data/@company_code} < / tem:EmployeeLogin >

  
  and iam test there I have put it in xml format

  How will I receive the make variable where I need to go again to the form

  Please help me...

  Set a variable (say ditto) XML web service result.

  Now you can access your name like/process_data/myResult/Envelope/Body/ALL_GetEmpNamefrmIDResponse/ALL_GetEmpNamefrmIDResult

  Seems clear?

  Nith

• How to refresh the Listview after adding a new item

  Hello

  I have the following list:

   ListView {
                                      id: channelsList
  
                                      dataModel: categoryModel
  
                                      listItemComponents: [
                                          ListItemComponent {
                                              type: "item"
                                              StandardListItem {
                                                  title: ListItemData.name // Channel name
                                                  imageSource: ListItemData.imageFile
                                                  status: ListItemData.id
  
                                                  id: channelItemId
  
                                                  contextActions: [
                                                      ActionSet {
                                                          //title: contentView.title
                                                          ActionItem {
                                                              title: "Add to Favorites"
  
                                                              onTriggered: {
                                                                  console.log(ListItemData.id + " will be added to the Favorites");
                                                                  //categoryModel.addFavorite(ListItemData.name, ListItemData.imageFile, ListItemData.id);
                                                                  channelItemId.ListItem.view.viewTriggered(ListItemData.name, ListItemData.imageFile, ListItemData.id);
                                                              }
  
                                                          }
  
                                                      }
                                                  ]
                                              }
                                          }
                                      ]
  
                                      onTriggered: {
                                              var chosenChannel = dataModel.data(indexPath);
                                              console.log("indexPath: " + indexPath);
  
                                              var playingPage = playpagedef.createObject();
  
                                              playingPage.chname = chosenChannel.name;
                                              playingPage.cid = chosenChannel.id;
                                              playingPage.init();
  
                                              Qt.nav.push(playingPage);
  
                                      }
  
                                      attachedObjects: [
                                          // The bucket categoryModel is a non visible object so it is set up as an attached object.
                                          // The categoryModel itself is a QListDataModel defined in categorymodel.h and registered
                                          // as a type in the creation of the application.
                                          CategoryModel {
                                              id: categoryModel
                                              // The path to the JSON file with initial data, this file will be moved to
                                              // the data folder on the first launch of the application (in order to
                                              // be able to get write access).
                                              jsonAssetPath: "models/channels.json"
  
                                              // The filtering is initially set to "Category 1" to show category channels
                                              filter: label.text
                                          },
  
                                          ComponentDefinition {
                                              id: playpagedef
                                              source: "PlayingPage.qml"
                                          }
                                      ]
  
                                      function viewTriggered(name, imageFile, id)
                                      {
                                          categoryModel.addFavorite(name, imageFile, id);
                                          categoryModel.clear();
                                      }
  
                                  }
  

  and the categoeymodel.h is as follows:

  #ifndef _CATEGORYMODEL_H
  #define _CATEGORYMODEL_H
  
  #include 
  #include 
  #include 
  #include 
  
  using namespace bb::data;
  
  // The category categoryModel is based on the QListDataModel template, which in turn
  // implements the abstract DataModel class.
  typedef bb::cascades::QListDataModel CategoryListModel;
  
  /* CategoryModel Description:
   *
   * CategoryModel class for the Category List application, the data categoryModel
   * reads and write from a JSON file that keeps all item data
   * for the list.
   */
  class CategoryModel: public CategoryListModel
  {
  Q_OBJECT
  
  Q_PROPERTY(QString filter READ filter WRITE setFilter NOTIFY filterChanged)
  
  Q_PROPERTY(QString jsonAssetPath READ jsonAssetPath WRITE setJsonAssetPath NOTIFY jsonAssetPathChanged)
  
  public:
      /**
       * Constructor that sets up the recipe
       * @param parent The parent Container, if not specified, 0 is used
       */
      CategoryModel(QObject *parent = 0);
      ~CategoryModel();
  
      QString filter();
  
      void setFilter(const QString filter);
  
      QString jsonAssetPath();
  
      void setJsonAssetPath(const QString jsonAssetPath);
  
  signals:
  
      void filterChanged(QString filter);
  
      void jsonAssetPathChanged(QString jsonAssetPath);
  
  public slots:
      void addFavorite(QString channelName, QString channelImageFile, int channelId);
  
  private:
      bool jsonToDataFolder();
  
      // Property variables
      QString mFilter;
      QString mJsonAssetsPath;
      QString mJsonDataPath;
  
      // A list containing all data read from the JSON file
      QVariantList mData;
  
      //Invocation variables
      bb::cascades::Invocation* mInvocation;
  };
  
  #endif // ifndef _CATEGORYMODEL_H
  

  My problem is that the listview is not get automatically updated when a new item is added to the datamodel (a favorite channel is added). I have to exit the application and restart to see the updated list.

  categoryModel.addFavorite(name, imageFile, id);
  categoryModel.clear();
  

  categoryModel.clear ();

  does not work. I get:

  Asset: / / / hand. QML:180: TypeError: result of expression 'categoryModel.clear' [undefined] is not a function.

  I would like to know how to achieve using approach "more correct".

  QListDataModel does not expose its internal storage directly. It is possible to reconstruct the map by performing an iteration in a loop (with the help of data() and size() methods), the dataModel entries:

  http://developer.BlackBerry.com/Cascades/reference/bb__cascades__qlistdatamodel.html

  but I don't see how this could help. If the filtered data is changed, it must be merged with the original sort data.

  Why the original approach has not worked?

  I could not understand from the description appearance of the interface user, please post a screenshot if possible.

• Problem with Web service connector

  Hello

  I am trying set OOTB Webservice connector but get the following error when executing the search of the user of the IOM operation.

  oracle.wsm.policy.advertisement.AdvertisementException: WSM-01701: The Runtime PolicySet cannot be announced due to validation errors.

  PolicySet "PolicySet [subjectPattern = ResourcePattern [pattern=/oim_domain/soa_server1/soainfra/default/SXXXXWSConnector/WSConnector/1.0/soa_4ddd27bc-adea-4504-80cb-298d293a12ca/SERVICEs/wsconnector_client_ep/PORTs/WebservicesConnectorService_pt, subjectType = SCA_SERVICE, terms = {PORT = WebservicesConnectorService_pt, COMPOSITE = SalesforceWSConnector, = SCA_SERVICE, SUBJECT_TYPE = wsconnector_client_ep, REVISION = 1.0, LABEL = soa_4ddd27bc-adea-4504-80cb-298d293a12ca, PARTITION = by default, DOMAIN = oim_domain, SERVER = soa_server1}], domainExpression =http://org.identityconnectors.genericws#wsdl.endpoint(wsconnector_client_ep/WebservicesConnectorService_pt)]. , polmap = {oimcp/WS_CONNECTOR_OUTBOUND = {policy [wsp:http://schemas.xmlsoap.org/ws/2004/09/policy] [local-optimization: off] [provides:{}http://schemas.oracle.com/ws/2006/01/policy]} SOAP_HTTP, {http://schemas.oracle.com/ws/2006/01/policy} SOAP_JMS] [oraSmartDigest:1332670244] [status: enabled] [smartDigests:1332670244V1_2, 1332670244V1_2, 359294128V1_5359294128V1_5,] [wsu:http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd] [Id: WS_CONNECTOR_OUTBOUND] [orawsp:http://schemas.oracle.com/ws/2006/01/policy] [smartDigest:1332670244] [description} : IOM Webservices connector outbound policy. This policy does the outbound processing for target webservice invocation calls][attachTo:binding.client][Name:oimcp/WS_CONNECTOR_OUTBOUND][category:security][{SimpleAssertion[custom-executor][Silent:false][name:WSConnectorOutboundAssertion][Enforced:true][custom:http://schemas.oracle.com/ws/soa/custom][category:security/custom][{AssertionBindings[{Config[name:WSConnectorOutboundAssertion_properties][{PropertySet[name:standard-security-properties][{Property[type:string][contentType:optional][name:reference.priority]}]}]}]}]}]}}}, constraintedDataMap={ConstraintGroup [terms=[], size=0, weight=0]=ConstraintedData [status=FAILURE localoptimization = null, validationErrors = [ValidationError [m_errorCode = WSM-01775, m_errorMessage = null, m_errorContext=/oim_domain/soa_server1/soainfra/default/SalesforceWSConnector/1.0/soa_4ddd27bc-adea-4504-80cb-298d293a12ca/SERVICEs/wsconnector_client_ep/PORTs/WebservicesConnectorService_pt, m_errorLevel = error, m_resourceBundle = policyvalidation, m_errorMsgArgs = [SCA_SERVICE, binding.server, oim_domain/soa_server1/soainfra/default/SalesforceWSConnector/1.0/soa_4ddd27bc-adea-4504-80cb-298d293a12ca/SERVICEs/wsconnector_client_ep/PORTs/WebservicesConnectorService_pt and oimcp/WS_CONNECTOR_OUTBOUND a client end point]]] "[{[, overrides = [,], polRefs = [PolicyReference [policyURI oimcp/WS_CONNECTOR_OUTBOUND =, polRefQName = {http://schemas.xmlsoap.org/ws/2004/09/policy} PolicyReference, version =-1, attributes = {{http://schemas.oracle.com/ws/2006/01/policy} status = enabled, {http://schemas.oracle.com/ws/2006/01/policy} class = security}, overrideProps = null]]]}, locked = true]"

  validation errors: "WSM-01775: politics ' oimcp/WS_CONNECTOR_OUTBOUND' cannot be set ResourcePattern" / oim_domain/soa_server1/soainfra/default/SXXXXWSConnector/1.0/soa_4ddd27bc-adea-4504-80cb-298d293a12ca/SERVICEs/wsconnector_client_ep/PORTs/WebservicesConnectorService_pt "SubjectType 'SCA_SERVICE' of attachTo"binding.server"since it can only be used with" an endpoint client.. [/ oim_domain/soa_server1/soainfra/default/SalesforceWSConnector/1.0/soa_4ddd27bc-adea-4504-80cb-298d293a12ca/SERVICEs/wsconnector_client_ep/PORTs/WebservicesConnectorService_pt]

  " .

  at oracle.wsm.advertisement.AdvertisementEngine.checkPolicySetErrors(AdvertisementEngine.java:1196)

  at oracle.wsm.advertisement.AdvertisementEngine.advertise(AdvertisementEngine.java:229)

  at oracle.wsm.advertisement.AdvertisementEngine.advertisePolicySet(AdvertisementEngine.java:641)

  at oracle.j2ee.ws.server.WebServiceProcessor.addPolicyAnnotations(WebServiceProcessor.java:1495)

  at oracle.j2ee.ws.server.WebServiceProcessor.advertiseWSDL(WebServiceProcessor.java:1440)

  at oracle.j2ee.ws.server.provider.ProviderWSDLHandler.addPolicy(ProviderWSDLHandler.java:362)

  at oracle.j2ee.ws.server.provider.ProviderWSDLHandler.handle(ProviderWSDLHandler.java:152)

  at oracle.j2ee.ws.server.provider.ProviderWSDLHandler.presentWSDL(ProviderWSDLHandler.java:118)

  at oracle.j2ee.ws.server.provider.ProviderServlet.presentWsdl(ProviderServlet.java:1124)

  at oracle.j2ee.ws.server.provider.ProviderServlet.doGet(ProviderServlet.java:1103)

  at oracle.j2ee.ws.server.provider.ProviderServlet.doGet(ProviderServlet.java:1011)

  at oracle.integration.platform.blocks.soap.FabricProviderServlet.doGet(FabricProviderServlet.java:396)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)

  In addition, performs the following step is required?

  --------------------------------------------------------------------------

  Configure the composite SOA in the composite.xml file. To do this, add the following in the < binding.ws > tags webservice entries that require decryption of password.

  < policyReference URI = "oimcp/WS_CONNECTOR_OUTBOUND".

  orawsp:category = orawsp:status 'security' = "enabled" / >

  < property name = "password" type = "xs: String" > abcd1234 < / property >

  < name = "password.field.xpath.locations property"

  Type = "xs: String" > / ns6:ListOfUser / ns6: User / ns6:Password < / property >

  < name = "target.payload.namespaces property"

  Type = "xs: String" > ns6 = urn: / acme/xml/password < / property >

  --------------------------------------------------------------------------

  Thank you

  You did deploy it after the connection of the wiring?

  It must be a field like [email protected] in there.

  Just to make sure, the oracle/log_policy is in the wsconnector_client_ep and your own web service?

• Data is encrypted for web service calls?

  I wrote a small JME (J2ME) application for a BlackBerry handheld device. This application calls web services to accomplish its mission. I am using the advantage of the specifications of Web Services, J2ME (JSR 172) supported by Blackberry JDE 4.3 +. I use Java Wireless Toolkit 2.2 from Sun to generate stubs and other support classes. I am able to invoke web services and also get the correct answers to it.

  After recalling some documents and websites, I understand that any communication that happens between your handheld and BES is encrypted (3DES or AES).

  Is the question that I have, if the data between the computer pocket and BES/MDS previously described WebService invocation are also encrypted? I have a question to cause that communication here is initiated by the device.

  Can someone please let me know the answers? Thanks in advance.

  If you are using MDS: Yes. Between the MDS and the webservice: No.
  If you use another link, as direct tcp, wifi etc.: No.

• BPEL to invoke the secure with HTTP Basic authentication Web service

  I call a synchronous web service in a BPEL process. The web service expects basic http authentication. How can I set/generate the user name and password in the BPEL process? I use Oracle Fusion Middleware 11g (11 g, WebLogic 11 g JDeveloper). Any help is appreciated.

  For more easily go to em console click on your composite deployed, you will find all the components in your bpel process below .click on component webservice invocation then clck on properties you can mentioned username, password I would like to know if this helps u

• Namespace prefix in the element root missing in variable assignment

  Hello

  We have the same problem not yet responded to this post, :

  Namespace prefix in the element root missing in variable assignment

  The proposed solution uses Java Embebeding, really think it's very dangerous.

  Is there another way?

  Thank you.

  We can use a literal xml (icon is like a "piece of the puzzle").

  For example:

  for this expected xml:

  
     0
     1
     2
     3
  
  

  in bpel entitled, we can use:

                  
                    
     0
     1
     2
     3
  
                    
                  
                  
                    
                    
                  
  ----
  

• BPEL:problem copy of response webservice for a release of var variable data

  I am not ale to copy data from Web service resppne to process its selection giving failure bpel variables, but I can see the answer in the audit level what mite be the question

  Check the namespaces in the xml response file

• Extract the total result of webService and the display in the console

  Hi team,

  IAM I invoke merger currency WebService: CurrenciesService? WSDL

  IAM able to run it.

  How can I extract the load output xml from it?

  the following is extracted from java code:

  	// Add your code to call the desired methods.
  	try {}
  	System.out.println ("method call");
  	variableName = currenciesService.getDailyConversionType (conversionType);
  	System.out.println ("Value of the Variable name->" + VariableName);
  	System.out.println ("Data->" + variableName.attribute1);
  	System.out.println ("The Type of Conversion->" + variableName.conversionType);
  	System.out.println ("User Conv TYpe->" + variableName.get);
  	} catch (ServiceException e) {}
  	}

  I don't think you can get it from the object rather either must implement a handler as in the related documentation or marshall to the string using JAXB XML. Including a sample for the latter:

  import java.io.StringWriter;

  Import javax.xml.bind.JAXBContext;

  Import javax.xml.bind.JAXBElement;

  Import javax.xml.bind.Marshaller;

  import javax.xml.namespace.QName

  ...

  Rule = creditRuleService.getRule (test);

  JAXBContext jaxbContext = JAXBContext.newInstance (Rule.class);

  Marshaller marshaller = jaxbContext.createMarshaller ();

  marshaller.setProperty (Marshaller.JAXB_FORMATTED_OUTPUT, Boolean.TRUE);

  StringWriter stringWriter = new StringWriter();

  JAXBElement jaxbElement = new JAXBElement (new QName("Rule"), Rule.class, rule);

  marshalling. Marshal (jaxbElement, stringWriter);

  String xmlString = stringWriter.toString ();

  Note that while I tested it it works I thought not performance etc.

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/

• Adding default namespace after inlinedXML() in OSB

  Hi all
  
  Please suggest me the following.
  We send a data as xml to the proxy service.
  
  
  
  This is the message that we get in OSB to send
  
  < notification >
  Data < type > < / Type >
  WebService < channel > < / Channel >
  < security > NONSSL < / security >
  < message >
  Transfer of < type > < / type >
  < message > <! [CDATA [< transfer > < / transfer >]] > < / msg >
  < / message >
  < destination > XXXXXX < / Destination >
  < priority > HIGH < / priority >
  < / notification > >
  
  Ideally what we send to our CDATA should not be any change.
  
  but when we print the body after the inlinedxml() function variable.
  
  default namespace add in the tag transfer.
  
  < xmlns:soap of the body-env = "http://schemas.xmlsoap.org/soap/envelope/" xmlns = "http://schemas.xmlsoap.org/soap/envelope/" >
  < transfer xmlns = "" >
  < / transfer >
  < / body > >
  
  Why OSB puts xmlns = "" in the tag transfer. "
  
  Kind regards
  ABHISHEK
  
  Published by: abhishek on September 11, 2012 12:52 AM
  
  Published by: abhishek on 11 September 2012 01:04

  http://schemas.xmlsoap.org/soap/envelope/ "> as outgoing variable"

  What is the type of proxy service and business (if any)? Make sure that's not ALL-SOAP or WSDL base. If you just want to exchange XML without using SOAP, and then creates a proxy Type messaging with the request and response (if necessary) in XML format.

  Kind regards
  Anuj

• How to pass an xml CDATA in the string element when OSB call a webservice?

  How to pass an xml CDATA in the string element when OSB call a webservice?
  
  I have a business service (biz) this route to exploitation of a Web service.
  
  An example of this legacy Web service request:
  < soapenv:Envelope xmlns:soapenv = 'http://schemas.xmlsoap.org/soap/envelope/' xmlns: ex = "example" >
  < soapenv:Header / >
  < soapenv:Body >
  < ex: run >
  < ex: arg > <! [CDATA [< searchCustomerByDocumentNumber >
  < documentNumber > 12345678909 < / documentNumber >
  [[< / searchCustomerByDocumentNumber >]] > < / ex: arg >
  < / ex: run >
  < / soapenv:Body >
  < / soapenv:Envelope >
  
  type ex: arg is a string.
  
  How to pass this structure CDATA webservice in OSB?

  Steps to resolve this problem:
  1 create an XML schema. For example:
  
  
  elementFormDefault = "unqualified" >

  
            
                 
                      
                           
                           
                      
                      
                           
                      
                 
       
       
       
       
  

  With this XSD, XML can be generating:
  
  
  documentNumber
  

  2 create an XQuery query to create a ComplexType searchCustomerByDocumentNumber. For example:
  (: pragma bea: element global-element-return = "searchCustomerByDocumentNumber" location = "searchCustomerByDocumentNumber.xsd" ::))

  declare namespace xf = "http://tempuri.org/NovoSia/CreateSearchCustomerByDocumentNumber/";

  declare function xf:CreateSearchCustomerByDocumentNumber($documentNumber_as_xs:string)
  as {(searchCustomerByDocumentNumber)}
  
  {$documentNumber}
  
  };

  declare the variable $documentNumber as XS: String external;

  XF:CreateSearchCustomerByDocumentNumber ($documentNumber)

  3. in your step in proxy pipeline add to assign the created the XQuery function call from the number of the document of your payload.
  Assign to a variable (for example: called searchCustomerByDocumentNumberRequest)

  4. create an another Transformation of XQuery (XQ) to create a request to the existing Web service. For example:
  {fn - bea: serialize ($searchCustomerByDocumentNumberRequest)}

  For more information about xquery Serialize function:
  41.2.6 fn - bea: serialize()
  You can use the fn - bea: serialize() function if you need to represent an XML document as a string instead of as an XML element. For example, you can share an XML document through an EJB interface and the EJB method takes the string as an argument. The function has the following signature:

  FN - bea: serialize($input as item()) as xs: string

  Source: http://docs.oracle.com/cd/E14571_01/doc.1111/e15867/xquery.htm

• Global Variables are preferable to the Globals functional - so there! :-)

  I feel a little controversial today so forgive the brutal title of this post

  I've never used global variables because I was under the misconception that they are somehow 'bad '. That's all I've heard since I started learning the LabVIEW. Review the code in the nets upconvert and downconvert. The ugliest code uses globals and some of the most beautiful code does not work. This means that bad programmers use global variables and globals are so bad programming practice. This is not true. Globals are just easy to use for newbies to use them. ' Not initialized what? I can't find those on the pallette? »

  I think I always wondered unconsciously that globals are bad. They are not bad, it is their use that may be bad. This is true for anything in life.

  The first and the most obvious problem with global variables is racing conditions. But this is not strictly the overall causing the race condition. This is the data stream is not defined.

  

  But the same is true if functional a global being misused. In the example below there is nothing to enforce data streams.

  

  You must run the data flow with a thread of error for example.

  

  Globals do not have a thread of error but not fear - the man of the sequence is here!

  

  You only need the sequence if the global is directly on your drawing. These two structures of single image sequence could be replaced by a NumericWrite.vi and a NumericRead.vi containing nothing but overall, a command or the indicator respectively and the terminals of the error. Put it online and it is good as gold. Or you might have a Subvi containing nothing but a frame two cases selected by an enumeration containing the elements 'Get' and 'Set '. Now, it looks like a duck and quacks like a duck. Don't you worry by the overhead of the structure of the case either. If the enum is a constant, it will be unfolded.

  Another problem with globals, it's that they are, well, global. Is not different from a functional overall, so it isn't really a problem anyway. Globals and globals functional it is easily taken by placing them in a library and define the scope of the access. Not to mention that libraries give you namespaces and "namespaces are one honking great idea - do several of these!" *

  The real reason to use a global rather than a functional overall is that they are about twice as fast.

  Until this morning I would have recommended to use a more functional global overall. But I changed my mind. Someone can it change back?

  * The Zen of Python

  
  

• How to access a global variable that is common between the different baskets project library

  My project consist of several libraries, after generation the library project packed for each library, I find it cannot share data in a global variable between different packaged project library file. For example: packed project library #1 contains VI variables global wirte 'position' and give it a value '400 '. Library #2 present another VI project try to read this global variable, but he gave reading of is NULL not "400". Why has this happened? Is it possible to solve, welcome any help, I wll appreciate for this!

  If you understand what is happening here...

  When you build a PPL, it takes in the .lvlib and also all the dependencies of the .lvlib.

  In your case, when you generate the Test Task.lvlib in a .lvlibp, she also pulls on a copy of the DataProcess.lvlib:GlobalsVariable.vi because it's addictive to read GlobalVar.vi.

  When your application runs, you end up with two copies of GlobalsVariable.vi in memory:

  DataProcess.lvlibp:GlobalsVariable.vi

  AND

  Test Task.lvlibp:: GlobalsVariable.vi (I don't know how PPLs namespace dependencies... If there is still the DataProcess.lvlibp)

  Because they are different screws (i.e. in a different namespace), they have their own memory and that's why you can't access the data.

  Your Test Task.lvlibp calls the version of GlobalsVariable.vi, he pulled the dependencies.

  To solve this problem - you must ensure that Task.lvlibp of Test calls the version of GlobalsVariable.vi of the DataProcess.lvlibp - you'll need to replace all instances with the version of the PPL. Of course, if you run DataProcess in the development environment, then it will always be bad namespaced, hence the suggestion to put your global variable VI in is own PPL that you then use in the process of data and Test tasks.

• Passing variables to TestStand

  I appologise for another probably silly question: I would like to use a variable / parameter (which ever you choose to call) within my method. It seems that all models are configured to output only. for example: -.

  public void DummyFunctionName (out double [] measures, out String reportText, out bool errorOccurred, out int errorCode, out String errorMsg)

  I tried to create my own method with types, but it seems that the format for methods is fixed somewhere otherwise; Maybe in the Interop.api? I do not know?

  I also checked that it is impossible to go into something that is defined as outside.

  Once you build an assembly of work (most likely using MS Visual Studio), you can include the assembly of your TestStand sequence.

  Drop a step using a code module, select the adapter for .NET. Navigate to the assembly, select the root class. Now you should be able to select one of the functions like "Invocation.NET". The parameter list must meet by itself:

  Settings using the "out" keyword are of the return values of the module and cannot pass data IN the service.

  Without any keyword parameters are used as input for the module.

  TestStand will tell you if a parameter is 'in' or 'out '. Returnvalues (public INT [...] {return [..])} are always "out".

  Norbert