Why are the subtitles text highlights not appearing does not correctly?

Similar Questions

• Why are the latest updates on my site does not appear online?

  They look fine in preview, but once I hit publish the site still has the old version.

  Hello

  Can you check with another browser or try to clear browser cookies.

  If there is still the same, please share the url of the site.

  Thank you

  Sanjit

• PDFs with parts of the text have been highlighted, and now, suddenly, these docs print without the appropriate text highlighted. Never happened before. As seen on the screen, highlighting appears, but when you print, it's gone.  Help, please.

  PDFs with parts of the text have been highlighted, and now, suddenly, these docs print without the appropriate text highlighted. Never happened before. As seen on the screen, highlighting appears, but when you print, it's gone.  Help, please.

  Try to turn on the print with comments. The comments really are your strengths.

• Why are the games on the App Store different from an iPhone to an iPad?

  Why are the games on the App Store different from an iPhone to an iPad?

  Because they are different devices and not all applications run on both.

• Why are the jpg created from completely blurry (fuzzy) panoramas? The dng image is strong!

  @ !@

  Why are the jpg created from a panoramas stitched by completely blurry (fuzzy) LR6? The original images as image panorama created by LR is strong!

  Windows Live Photo Gallery is limited to the image files that are smaller than 100 million pixels: "this problem occurs because, by default, Windows Photo Gallery will open not an image file that is greater than 100 million pixels."

  https://support.Microsoft.com/en-us/KB/2725211

  It opens OK, but fuzzy. Here is the message I get when I try to do something in it with your JPEG... or my JPEG:

  

  Your JPEG's 109 million pixels.

• Why are the rotation buttons upside autour

  Why are the rotation of the knobs the wrong way autour.

  It allows to be that we could move the buttons of the icon freely, but now we are forced to put them as chosen by Adobe.

  The problem is that Adobe is American and we know all that the Americans do things the wrong way autour. :-)

  So why does make sense to them than the Rotate counterclockwise button is on the right and the right-hand rotation button is left?

  If you want to rotate a PDF anti-clockwise, then you choose the button anti-clockwise. It is a movement of the LEFT then why is the button counterclockwise on the right?

  Hello

  Thanks for your suggestion. If you use Acrobat DC we have options page under the tool rotation organize Pages (with the same icons) where changes can be saved, while, to discover rotation only tools that cannot be saved are opposite. It's just to make the difference between the two sets.

  Thank you

  Abhishek

• Why are the creative Cloud system and the system of Support of Adobe gawdawful so dear and so ugly?

  Why are the creative Cloud system and the system of Support of Adobe gawdawful so dear and so ugly?

  Free market at work in a gullible or irrational population.

• Why did the last updated do not and give me U44M1P7 this_?

  See above. Why did the last updated do not and give me U44M1P7 this_?

  Hi cfosofart,

  Please go follow the mentioned kb: http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html .

  Kind regards

  Romit Sinha

• Why are the MP4 files I produce 'protected '?  How can I disable that?

  Why are the MP4 files I produce 'protected '?  How can I disable that?  In its current form, I can't open these files MP4 'protected '.

  Is there a setting in the process of file conversion project Pro first to MP4 I can change to prevent this?

  I have an Apple MacPro and spin the Creative Suite 5 production premium.

  Here is the screen shot which leads me to believe these files is 'protected '.

  Thanks for your help!

  Matt Dubuque

  

  Ok.

  There is no kind of protection added by Premiere Pro, so that if anything it is a Mac issue.  My guess would be something to do with permissions.

• Converter Standalone 4.3.0 question - Get "the specified parameter was not correct" and no source listed volumes

  Sorry - hopefully an admin can move this to the correct forum. I could find no community forum labeled converter so no idea where to post this message.

  My first time trying to use the converter. Use the latest version of the Converter 4.3.0 to try a P2V by using the source computer. This is a laptop Dell D820 running Windows 7 Ultimate x 64 business. I chose the source machine and all the default settings. Destination product is VMware Workstation 7.x and target files are either local or to a port USB drive (tried both). In the last step, I get a yellow bar with the error "the specified parameter was not correct" "but the following quotes are empty and presume it suppose to say the name of the setting.» The only thing I see that is suspect is that if I click on change in section 'Data copy', the list of volumes and empty and assume that shouldn't be. The sample video to get advice on the use of converter on VMware support sites show a volume listed here. I tried the same approach on a completely different system under Vista SP2 and still no volumes appear so maybe it normal?

  No idea what I am doing wrong? I did export logs and watch and it appears no volume information has been captured (a lot of & lt; destroyed & gt ;) but even once, just guessing.) Any advice would be appreciated greadly.

  Thank you

  Don

  I had the same problem on a Win7 x 64 machine... There was no listed disk to convert.

  I managed to solve the problem by running the converter as an administrator. Right-click on the Desktop Converter icon and select run as administrator.

  The disks appears and you can select which can be the converter.

• "The network adapter is not correctly configured to use the ip Protocol" problem on Vista

  Hello. My PC has recently came across this problem "the network adapter is not correctly configured to use the ip Protocol", every time I click on diagnose & repair. I don't know how to fix it. Please help, thanks in advance. Magic

  Hello X-x_MaGiC_x-X,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

  So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

  Restore Windows Vista to a previous state

  In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

  If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

  You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

  1 screen of system restore

  By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

  2. the list of available restore points

  You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

  3. confirm the selected restore point

  If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

  4. second Confirmation

  If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

  5. restoration of a restore point

  When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

  6. system restore was successful

  If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

  7 undo the last system restore

  Your computer should now work correctly again.

  With the help of the restoration of the system in the Windows recovery environment

  Manual creation of Restore Points

  As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and I would save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

  You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

  8. the System Protection tab

  To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

  9. Enter the manual restore point title

  Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

  10. Manual restore point has been created

  Now that you have finished doing the manual restore point, you can close the system window.

  Try to download the correct and up-to-date drivers.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm paying for telephone folios and the 1800 number that is advertised on the shopping cart is not correct - what number I ring in Sydney, Australia

  I'm paying for telephone folios and the 1800 number that is advertised on the shopping cart is not correct - what number I ring in Sydney, Australia

  Do you mean you want to buy downloads additional folio? If so you are a Pro user or company, connect to your DPS dashboard and click on the "Contact Support" link at the bottom left

• What should I do if my computer says that the DVD player is not correctly?

  Problem with the DVD player:

  It shows that the DVD player is not correctly.

  What should I do?

  Please, help me to solve this problem with DVD player: it shows that the DVD player is not correctly. And it is not ejected.

• The specified parameter was not correct: ".."

  Hello

  I am using VMware vCenter Converter Standalone to virtualize a few physical servers on an ESXi server.

  I installed ESXi 4.1.0 on a new server (quad core 2 processors, 48 gb of ram, a mirrored raid (where is the ESXi software) and a raid 5 for virtual servers).  I've already enabled 64-bit virtualization in the bios of the destination server.

  The first server I want to virtualize is a small server (Nothing mission critical).   The software main is executing is SpiceWorks.  I installed VMware vCenter Converter Standalone 4.3.0 Build-292238 on the source server.

  The error that I'm left with after you run the converter is:

  The specified parameter was not correct: ".."

  Let me guide you through the steps of how I get there.

  Launch of vCenter Converter

  Click on Convert Machine

  Under Select Source Type: Tension machine

  Specify the machine 'this local computer '.

  Next

  Select the Destination Type: VMware Infrastructure virtual machine

  Server: xxx.xxx.xxx.xxx

  user name: root

  password: password for root

  Next

  Name: leave the same...

  Next

  Select localhost.localdomain

  SELECT data store: Data1 (it was created on the raid 5 group, 860,75 1 GB of free space)

  Virtual Machine version: Version 7 of the

  Next

  Check the destination parameter... Check

  Let all the suggested default values / (go play with it more that one I get a working basis...)

  Next

  Summary (see bottom of post for summary)

  Finishing

  Special presentation...

  Then I get the error message

  The specified parameter was not correct: ".."

  The error message ends actually in times of double quotes

  If anyone has any suggestions, I would be grateful.

  Thank you.

  -

  ---

  Summary

  Information source system

  Source type: slot machine tension

  Name/IP address: the machine where works the VMware vCenter Converter Standalone server

  The CPU limit: None

  The network limitation: None

  Destination system information

  Virtual machine name: xxxxx

  Host/server: xxx.xxx.xxx.xxx

  Logged in as: root

  VM folder: None

  The host system: localhost

  List of resources: by default

  Power after the conversion: No.

  Number of processors: 2

  Physical memory: 3584 MB

  Network: Preserve County NIC

  NIC1 connected

  The VM network

  Type of disk controller: Preserve source

  Storage: The Volume of cloning-based

  Data configuration files store: Data1

  Customization of the destination

  Synchronize changes that occur during cloning: No.

  Install VMware Tools: No.

  Customize the guest operating system: No.

  Delete restore points: Yes

  Reconfigure the virtual machine: Yes

  in step 3 you can check to see if all volumes can be copied?  Just to make sure that it is a disk volume to move...

  The error should be something between the two tick marks, which is not double quotes.

  He complains that a value is null, rather than not null.  So, in step 3, make sure that nothing is missing.

  Kind regards

  Jon Hemming, b.SC., RHCT, VMware vExpert 2009
  http://Twitter.com/vJonHemming

  If your question or problem has been resolved, please click the "right answer".  If someone helped him, please click "useful answer.

• Why are the plugins Java required by medical systems not allowed to be reactivated, allowing medical facilities continue to operate?

  The problem with the more recent blacklist of the East, it is that the health care industry is behind in technology. Many medical systems is old and need older versions of Java to work. The blacklist because of countless facilities to lose the ability to water rescue medication order. Even my tech support office was bombarded with phone calls about this for the last 2 days. What can be done to allow these older versions of Java work in Firefox and restore the facilities to full operation?

  Hi JRChadwick,
  
  Sorry to hear about lag in technology of the health industry. There are older versions of Java Active. Oracle has released a update in February that resolves the security issue. What does Mozilla has been a softblock on it, which means that users get a notice this plugin it will be disabled and give them the option to activate it. To enable:

  1. Go in Tools > Modules > Plugins.
  2. Next to Java, click Activate.

  If the Enable button is not available, the block lists should have been updated before that Mozilla has changed to a softblock instead of a hardblock. In this case, follow these steps:

  1. Go to help > troubleshooting information.
  2. Click Open containing folder. That should open your profile folder in Windows Explorer.
  3. Closing Firefox.
  4. In your profile folder, delete blocklist.xml and pluginreg.datfile.
  5. Launch Firefox.

  At some point after that, you should then get prompt blocklist, but this time the ability to not disable it should be there.

  But I can't really emphasise this point: these versions of Java are actively used and the latest version is not vulnerable. If there is no chance, you can use the latest version of Java with the medical systems, this is the way to go.