Similar Questions

• I leave Apple Watch mangetic charger without turning on the card?

  Can I leave the Apple Watch mangetic charger without turning on the charger?

  When not to wear my watch, I put my Apple Watch on the stand of the watch...

  

  

  Does magnetic can damage the battery if I let the watch for a long time?

  Hello

  Yes, you can leave your watch on the charger without the power connected. The magnet will not damage the battery.

  If the power is rather left trendy, Apple Watch cannot be overloaded and again, the battery won't suffer wrong after normal use. Load stops automatically when it is fully charged (and restart as / when required due to the use of the current battery). Follow Apple's safety and handling instructions, and note also that:

  -It is not possible to turn the watch off the coast while it is on the charger and connected to the power supply - what is normal.

  -It is also normal to watch, adapter sector and charger become hot when it is connected to the power.

  More information:

  Check your battery and load your Apple Watch - Apple Support

  Keep Apple Watch in acceptable operating temperatures - Apple Support

  https://www.Apple.com/batteries/why-lithium-ion/

• When the voice is on watch unlock and faces cannot be changed. Why?

  What a voice on East of quarter won't open and faces cannot be changed. Why?

  Hello

  To unlock your watch when VoiceOver is enabled:

  -Press the digital button Crown or on the side once to go to the password screen.

  -Press each number once to select it, and then quickly tap twice again on this number to enter.

  Once the Watch has been opened, press firmly on the screen displaying the time in order to access the customization options of watch face.

• Why the temperature shows on my watch always different temperature on the watch of my husband when they use the same application?

  Why the temperature still showing on my watch shows a different temperature than on my husband watch when they both use the same weather app?

  Hi Jodie

  If you are each using the weather app (which is included in the framework of the iOS and watchOS), the following steps can help (followed by each of you):

  • On your iPhone, in the weather app:
    • If using anything other than the current location (which is included by default), make sure you have each added to a common location / city.
    • To add another location, select the icon «+»
  • On your iPhone, in the application of the watch, go to: My Watch (tab) > weather > default City > make sure you have each selected at the same location (for example: place of current residence or Mount Laurel).
  • On your iPhone, go to: settings > privacy > location Services:
    • Ensure that the location service is enabled;
    • Make sure Apple Watch is face value while it helps;
    • Check that the weather is set to always;
  • On your iPhone, go to: settings > general > background App update:
    • Check that the bottom App Refresh is enabled.
    • It can also help to activate the setting for the weather.
  • For optimal performance of your watch, keep the Bluetooth and Wi - Fi enabled at all times on your iPhone:
    • iPhone: settings > Bluetooth - on.
    • iPhone: settings > Wi - Fi - on.

• When I typed the fitbit ' "(!), my watch symbol can display color"swirl ". Now it jumps directly to the graphical version boring bar. Help!

  When I typed the symbol "fitbit" my watch to view color "swirl". Now it jumps directly to the graphical version boring bar. Help!

  Hi Bevan

  If you are referring to the application of the activity (rings icon), you can display a graphic (to move, Stand, or fiscal year) rather than the overview of three rings, which summarizes the progress of your day for all three goals.

  Back to Overview: looking at the graph, make slide down once on the face of the watch, and then drag to the left until you reach the overview.

  More information:

  Use the activity on your Apple Watch - Apple Support

• Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes February 29, 2016

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.  During the process I started to have some warning of our AT & T account that I approach the limit of our data plan, then in quick succession, only warnings, said I've reached the limit and then passed in the data, limit charges.  At the time it was done, I had accumulated more than 2 gigabytes of additional data charges.

  Until that point, I was very pleased with the device and confident in the ability to use Wifi and data.  Due to this incident, I became very suspicious of the camera and the huge potential for data overcharges. It is extremely disconcerting as it happened while it is directly connected to the internet using my computer at home.

  Please note that, in the episode my ISP and the computer is remained connected to the WEB with no sign of connectivity issues.

  Someone at - he had a similar experience and understand what went wrong?

  Thanks for your support,

  Jerry

  JerrolK wrote:

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.

  You have chosen the option of direct download, you have received a message of warning from AT & T about it yet.

  He did what you asked it to do.

• Why isn't my old watch backup appear in the list when you set up the replacement or new shows?

  Why isn't my old watch backup appear in the list when you set up the replacement or new shows?

  I've been upgraded to a new watch, and during the installation of my phone would not offer a restore of backup.  The problem is that the factory OS on the new watch was 2.0.1 while backup of my old watch watch OS 2.1.

  I had to implement the new shows like new, then update the OS 2.1, désapparier it and pair it again.  It gave me the option to restore the backup of the original watch origin.

  [Must be like the iPhone backups, you cannot restore a backup of a newer operating system that the phone is running.]

  Hello

  Yes it is true backup must be the same ios

  See you soon

  Brian

• Why don't my Apple Watch telling me when I received a text when the Bluetooth?

  When my phone is on wifi and I wear my watch, my watch will make noise and show that I received a text as soon as I get one.

  However, when I got my phone and watch connected via bluetooth and I get a text message, nothing happens on my watch. Hear no notification nothing. But if I open the messages app on my watch, the new text will be there.

  Why can't I not made aware all the time on my watch when I get a text message? As isn't that kind of the gist of this watch in addition to reading time? It's really * me off.

  You will need to check your settings on the app shows. The watch will only receive notifications if the iPhone is locked. See this Apple Watch user's Guide information page. http://help.Apple.com/watch/#/apdb50fd440a

• Why can I not select an object using the direct Selection tool?

  PHOTOSHOP: I have an ellipse I have rasterized. Why can I not use the direct selection on it?

  The direct Selection tool is designed for use of vector path.

  If you want to use the tool, you can get your selection by going to the Panel traced and clicking the work path make the symbol at the bottom of the Panel, a path

  Then, if you choose, you can click the load path as a selection symbol to return to the moving dotted line (rasterized).

• Why is it a message "Access is denied" is displayed on the direct download link?

  That's what I get when I click on the direct download link... Why is this?

  Access denied

  You do not have permission to access to " " http://trials3.Adobe.com/AdobeProducts/PPRO/7/OSX10-64/PremierePro_7_LS20.dmg ? "on this server.

  Reference #18.7649212e.1401822459.126dcfe

  Hello

  You can try this download new Adobe CC trials: direct links (no Assistant Manager) | ProDesignTools

  Read it please Note carefully

  concerning

• The screen of my watch has expanded to the point that is no longer legible. Why?

  The screen of my watch has expanded and is no longer legible.

  Hi Warren

  Zoom (an accessibility function) has been activated on your watch.

  To return the contents of the screen to size normal, double click on the screen with two fingers.

  Later, if you prefer to disable the Zoom:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > general > accessibility > Zoom - put it off.
  • Or on your watch, go to: homescreen (via a simple press on the digital Crown) > (cog icon) settings > general > accessibility > Zoom - tap and enable / disable.

  If the accessibility shortcut has been enabled and configured for the Zoom, you can also enable and disable functionality more conveniently:

  • On your watch: quickly press the digital Crown three times.

  To set up accessibility shortcuts:

  • On your iPhone, in the application of the watch, go to: Watch My > general > accessibility > accessibility shortcut (bottom) > select / deselect Zoom.

• Why are my automatic messages deleting, how can I stop the direct e-mail window auto deleing my email once it has been read.

  How can I stop the direct e-mail window auto deleing my email once it has been read.

  How can I stop the direct e-mail window auto deleing my email once it has been read.

   
  They are not deleted.  While in the Inbox: see tab | Message Filter button. Check to show all Messages, not Hide the Read Messages.
   
  Windows Live Mail help is in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all
   

• Why the printer stop printing when you click Cancel?

  This may belong in the Technet forum, but this is a question that concerns me since the days of Windows 95.

  Sometimes striking impression make you you screwed up in a certain way and to cancel the print job. Enter the printer, right click on the document and hit Cancel usually takes some time, during which the printer keeps printing and waste of ink & paper.
  Why is this? Why doesn't it stop immediately? Why do several PAGES for it to stop? Come to think of it, I can't think of a time casual since I left high school (which uses Mac and Apple printers) when I have not tried to stop a print job to a printer that was not Hewlett-Packard (an HP printer from ""), so I'm not sure if it is exclusive to HP or not. Work used to stop printing almost immediately after order - Macintosh printing, or at least they did with printers ImageWriter and LaswerWriter Mac OS 6.0.8 - 9.1.
  This is not the case with Windows 95 - Windows 7.

  I used to assume it had something to do with the buffer memory of the printer, but a recent incident involving someone accidentally unplugging the computer when the printer was on changed this long assumption based on my experience when I bought a buffer for my printer ImageWriter II return to 1989 or 1990. Printing stopped almost immediately after the computer that it was connected to the lost power (he tried to disconnect a faulty device so that it could be shipped to the manufacturer and pulled the wrong plug).

  This phenomenon embarrassing occurs on several different computers, printers and configurations. School computer laboratories on the areas of small business workgroups to systems of the House with the directly connected printer.

  Hi, SlickRCBD,

  The memory has a lot to do with why this does not block when cancelled.  There may be an older doc who is was filed here.  Unplug the printer from the computer periodically.  Leave that he unplugged for several minutes (5 max), then reconnect.  Remove the cables that connect to the back of the printer for the same amount of time.  This clears the memory.

  Open elevated command prompt

  Enter Net Stop Spooler

  Wait message spooler stopped

  Go to your windows\system32\spool\PRINTERS\ folder

  Search for files ending with. SPL and. SHD created around the time that you were trying to print - delete these files.

  Return to the command prompt window

  Type Net Start Spooler

  You will see message spooler has begun

  Output

  Sometimes the files are hungup.  The above gets rid of them.

• Why the vob file has not been opened by windows media player. ?

  Hello

  I have a DVD of the Hindu film. When I try directly to open to watch this film of media windows Player, but does not work. It opens only player form of de Niro and VLC Media. Please give me some advice on this, that is why the opening of Windows media player. ? Thank you

  Krishna

  I am confused to tell you that you can not read a DVD, or are you
  saying that you want to change the default program that plays?

  The following items may be worth a visit:

  How to change the auto run settings
  http://www.ehow.com/how_5220936_change-AutoPlay-settings.html

  How to change CD/DVD content of actions to AutoPlay in Windows XP
  http://www.winbookcorp.com/_technote/WBTA20000846.htm

• Why the beta release more versions of production?

  The version currently available in beta version download direct and auto-updates to date is 20.0.0.255 for NPAPI but the current production version is 20.0.0.267 so why exactly is the number of comparable to less the same production release beta or is simply not synchronized?

  Comparing currently available for production release notes beta release notes shows that fixes the beta until 18 November 2015 went to the production version for 8 December 2015 and patches of the beta until December 22, 2015 (same date as the latest beta) to production December 28, 2015 , whose version for this date has been 20.0.0.267. But there is no history of previous beta release notes, and what is currently available in the beta release notes does not even the current version number beta since everything there is for 20.0.0.230 (which does not match the latest date) so its somewhat sketchy on the possibility to determine why the beta number regime fell significantly below comparable versions of production.

  Another problem with them being more out of sync, it's that production ActiveX version 20.0.0.270 was released on January 1 with no update to the beta download pages, release notes, etc. I use too much news, a version of Windows to check what ActiveX version is actually available for download, even if it seems to be as old as the other versions. Oh and this raises another question. The main beta page has the date of December 22, 2015, but the beta download page has the date of December 16, 2015 so that they are not reliable either. So it seems that even if you ignore the match numbers that the last beta version file is not as new as the latest production version, which is even more absurd.

  All these inconsistencies make me seriously feel like giving up beta programs even if I found and reported a couple crashes last year, if they can't even keep track of which is which. Very few very popular software professional and a great company. I hope that this will trigger some kind of audit to triple - check that all the files, documents, points distribution and all for the two output channels are completely synchronized. Please either explain or if not then at least just fix it so all things are not such a mess.

  Our priority, especially with off-cycle releases (fix emergency for the safety and functional escalation), is to get the ~2.5Bn people using the channel output in good condition.  Once that was taken care of, we usually try to keep with a beta that exceeds the version in the next few days.

  December/January was punctuated an emergency security fix (so that the entire society was on vacation) and a few subsequent fixes for functional fallout.  The beta chain was not a priority target during this period.  The goal is generally to move the beta chain to a newer version than the final version in a few days, but it is not always possible, especially when we are operating with a reduced crew.

  We * will * to the next major release of Flash Player shortly before beta channel.

  Your point is well founded on contradictions with the documentation.  For all this stuff, I'd like to be an artifact of the build system, but is a process manual, subject at the present time.  It's a long time that the Flash was on an 18-month cycle, and beta versions came at intervals of 30 to 90 days.  The team was about 3 x more as well.

  We have moved at a rate of modern output and have made investments of huge security along the way, but the manual documentation process persists and are long enough.  It clearly leaves to be desired, but the reality is that we make decisions hard prioritization and things like beta documentation are secondary to the security of end users and ensuring that when in the bowels of Flash security patches were unfortunate, unforeseen side effects, those be resolved as quickly as possible.

  We really appreciate the effort to test the beta community will contribute, with the huge amount of data on the overall stability it generates.  The documentation and logistics for all releases (beta and otherwise) fall on the shoulders of a small handful of dedicated and hard-working.  We are eager to help them in improving efficiency and automation, and we will try to keep a closer eye on the subject in the meantime.

  Thank you!