WorldPay - need assistance payment gateway installation!

Similar Questions

• I need assistance with the installation of 3 failures of updates for windows vista with error code 646

  I tried all day install the following updates:

  1 security Update for Microsoft Office Excel 2007 (973593 KB)
  2. security Update for Microsoft Office System 2007 (973704 KB)
  3. Update for Microsoft Office Word 2007 (974561 KB)

  Updates have been through to 4 am cst, but when I turned on my pc today, Windows Update showed that I needed to install updates 3 mentioned above. I tried all day to make install, but each attempt failed. I clicked the button 'Try Again' and always updates does not pass.

  I deleted the files that I no longer use of haven't used in a year or two. I also deleted some files that I have no use for out the files in the folder my documents. I even emptied my recycling bin to help clear up some disk deespace, still nothing.

  I tried the suggestions that are currently on the forum, but do not always help.

  When I went to manually download updates an error pops up saying "Package of Installation failed."

  Help, please. I need of new suggestions or something.

  I had to disable the "User Account Control" (UAC), which allows you to run as administrator in Vista.  After that I turned it off, all 4 of these updates installed and it doesn't require manual installation.   Follow these steps:

  In the case of Vista view:

  1.) go to start; Control Panel; "User accounts and family safety"; User accounts.
  2.) click on 'Enable user account control or disable' (last point on the page)
  3.) clear the checkbox "Use User Account Control (UAC) to help protect your computer" and click "OK."
  4.) restart the computer, and then run the installation of the system and they work.

  If you are in Classic view:

  1.) go to start; Control Panel; Security Center
  2 screen.) in the "Windows Security Center", go to the last item "User Account Control" and click the button to turn off.

  You can also see the security shield in your Start menu.  You can also access the UAC via this.

  After that the installation of the system have been updated, make sure that you go back and turn the UAC "" and then restart your computer so that unauthorized updates do not occur.   Always try this turn off if install doesn't work.

• I need assistance with the installation of CS5.5. When I try to install, it tells me "could not initialize installer. Please download Adobe Support Advisor to detect the problem. ", but the Support Advisor is discontinued it brings me to one of these gene

  When I first tried to install CS5.5, it was fine until the complete step. It would not be complete unless I closed Safari and SafariHistory (whatever that is), but to my knowledge, the Safari is not running. He wouldn't let me move forward without leaving the program, so I finally decided to cancel the completion/installation and started during the installation. But the next time I tried to install it, he gave me the message that it could not initialize. I uninstalled CS5.5, but it's always me that is not the message. I don't have another version of the Creative Suite in my computer. What can I do? Help, please.

  Sorry to hear that

  You can try to install the SafeBoot mode or via another user once account applications:

  https://helpx.Adobe.com/x-productkb/global/start-safe-boot-mode-Mac.html

  Or try again with the root account: connect to your Mac as a root user and try to install.

  Activation and use of the user 'root' on OS X - Apple support

  or if you still get the same error, I suggest that it is better to perform the manual complete removal of files Adobe and start over with the resettlement process.

• I need assistance with the installation of KB2416447. I get the error code 663.

  I tried to download and run dotnetfx.exe but had "failed to install Microsoft .NET Framework. If the problem persists, contact Product Support Services. "Then I get this error code" NDP1.1sp1 - KB2416447 - X 86 has stopped working ".  Can someone help me?

  Hello

  I suggest try to perform the clean boot and then try to install it and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  Also check out this link:

  http://support.Microsoft.com/kb/822798

  It will be useful.

• Problems with the installation of the Dibs payment gateway (non - Seamless Gateway)

  Hello

  Hope someone has a solution to this...

  Having chosen to use Dibs payment gateway which is without transparent bridge to this ecommerce store.

  The problem is that it does not connect to dibs to complete the payment, but sends an invoice.

  It is important that you look at the code < record - buy >

  While it is possible to help.

  < tbody >
  	"< tr style="display: none;">"
  	< td > < label > "Payment method < span class="req">*</span > </ label > .
  	< br / >
  	"" " < entry checked="checked" id="PaymentMethodType" type="radio" name="PaymentMethodType" value="7"/ > " HostedCreditCard
  	< table >
  	< /tr >
  	"< tr class="totalpris">."
  	< td > " < label for="amount"> ". KR. " < span class="req"> ". </span > " < span id="constraint-300-label"> ". </span > < / label >
  	"" " < entry name="amount" type="text" class="totalpris" id="amount" readonly="true" value="145.00"/ > < table >
  	< /tr >
  	< b >
  	< td > "" < input class= "cat_button" type= "submit" value= "Submit" id= "catwebformbutton" / > < table >
  	< /tr >
  	< / tbody >
  	< /table >
  	" < script type="text/javascript" src="/CatalystScripts/ValidationFunctions.js"> " " < /script >
  	"< script type="text/javascript">".
  	<! [CDATA]

  
  var submitcount72672 = 0;
  
  
  function checkWholeForm72672 (theForm) {}
  var what = "";
  If (theForm.FirstName) why += isEmpty (theForm.FirstName.value, "Name");
  If (theForm.LastName) why += isEmpty (theForm.LastName.value, "Last name");
  If (theForm.EmailAddress) why += checkEmail (theForm.EmailAddress.value);
  If (theForm.WorkPhone) why += isEmpty (theForm.WorkPhone.value, "work phone number");
  If (theForm.WorkAddress) why += isEmpty (theForm.WorkAddress.value, "Address");
  If (theForm.WorkCity) why += isEmpty (theForm.WorkCity.value, 'City of work');
  If (theForm.WorkState) why += isEmpty (theForm.WorkState.value, "Status of work");
  If (theForm.WorkZip) why += isEmpty (theForm.WorkZip.value, "Zipcode work");
  If (theForm.WorkCountry) why += checkDropdown (theForm.WorkCountry.value, "Land of work");
  If (theForm.Username) why += isEmpty (theForm.Username.value, "Username");
  If (theForm.Password & & theForm.PasswordConfirm) {}
  Why += isEmpty (theForm.Password.value, "Password");
  Why += isEmpty (theForm.PasswordConfirm.value, "Confirm Password");
  If (theForm.Password.value! = theForm.PasswordConfirm.value) why appendBreak += ("-password and its confirmation do not match.");
  If (theForm.Password.value.length < 6) why appendBreak += ("-password must be 6 characters or more.");
  }
  If (theForm.PaymentMethodType) why += checkSelected (theForm.PaymentMethodType, "payment method");
  If (! theForm.PaymentMethodType: getRadioSelected (theForm.PaymentMethodType) == 7) {}
  If (theForm.Amount) why += isCurrency (theForm.Amount.value, 'Amount');
  }
  If (theForm.CAT_Custom_328880)
  If (theForm.CAT_Custom_328880.value.length > 0) why += checkDate (theForm.CAT_Custom_328880.value, "Dato gaven skal sendes");
  If (why! = "") {}
  Alert (Why);
  Returns false;
  }
  If (submitcount72672 == 0) {}
  submitcount72672 ++;
  theForm.submit ();
  Returns false;
  } else {}
  Alert ("submission form is ongoing.");
  Returns false;
  }
  }
  [[] > / /]] >
  

  < /script >

  < / make >
  	< / div >

  
  

  Thank you and best regards,

  Elise

  The problem is solved!

  Not sure what the problem was but received the email from BC who

  Amazing that someone has managed to get what I had a problem.

  Thank you :).

• Did someone having registration problems and pay for photography of CC? I tried to pay with 3 browsers different and various links of their team of chat, and it seems that Adobe payment gateway is broken.

  I have a new iMac and already have a login from adobe. The payment gateway seems to be broken and Ive tried 3 different browsers, cookies deleted, etc.

  Contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• Integrate Klarna (Swedish payment gateway)

  Hi, I searched a while now on how to integrate this set of libraries with Business Catalyst:

  http://developers.Klarna.com/en/client-libraries/Klarna-checkout

  The only help I got tickets I sent BC is: "question Sen your on the forum", that's what I do. Has anyone managed to do this? And how can we do BC add these files to any supported payment gateways? They did with DIBS etc so why not cela?

  BC through PCI compliance and gets audited, they maintain a very high level of security. For these reasons and concerns. They would need to develop a safe method that takes time.

• remove the decimal of an equation to send to a payment gateway

  I have a value currently shows a decimal number

  @$amount = $_POST ["amount"];

  I need the decimal to show until the $amount variable is sent to the payment gateway

  What is the best way to remove the comma from the variable

  so an example value

  250.59

  will be sent as 25059

  Thank you

  Replace the decimal "." with nothing else using str_replace().

  $amount = str_replace(".","",$amount);

  best,

  Shocker

• With the help of the Standard PayPal payment gateway

  I built a site for a client including an online store, and they want to use Standard PayPal as the only payment gateway. When I set up a payment gateway, PayPal standard does not appear in the drop-down, menu-I see site Web Pro and PayFlow payment. It gives the 'PayPal site Web Standard (optionally)' option below, but you can not continue without selecting an option in the drop down menu.

  Any ideas would be welcome. Thank you.

  Nope, that's a separate issue.

  At some point you have deleted your site purchase form.  I looked at your site and you noticed only have a "contact" form

  - http://screencast.com/t/wS9Rg5ae2ha

  So what you need to do is create a purchase form.  All that is required to associate eCommerce is the payment method + fields that you want to capture.  Once you save the new form go to your layout of the store-> check (buy) and remove the active form and insert the new form. You can delete unwanted payment method options while leaving 'PayPal' and re - test order.

  I hope this helps!

  -Sidney

• Payment gateway / Merchant Account

  Hi Chaps,

  I am building an online store and got to the point where I need information about the payments.

  The site is in PHP and already have a whole cart, so just needed to accept credit cards and process them on a bank account.

  Anyone has information or preference on the best service provider to use, level of ease on integration?

  I am after a service provider that requires no redirection to a third party website (such as PayPal), and we cannot apply for PayPal Web Payments Pro, so something that was 'stay' within the site would be great.

  Any info would be a great help.

  While the payment within your handling application process is nice from a control point of view, there may be some disadvantages that you have to worry about being compatible with PCI data security standards.  Specifically, you would need to conform to the pci pa - dss standard.   More info here: https://www.pcisecuritystandards.org/security_standards/pa_dss.shtml to minimize, or even eliminate your application requirements maintained and verification of pci pa - dss, you can take advantage of a compliant pci level 1 as http://www.paymentsgateway.com payment gateway to process your transactions.   They have a couple of different integration such as the SWP solutions that can treat your CC items securely without all the headaches of the pci.

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• I need assistance with Outlook Express

  I need assistance with my outlook express. Please

  See www.oehelp.com/OETips.aspx#7 or be more specific, and perhaps we can help you.

  Steve

• I NEED ASSISTANCE WITH MY ETHERNET DRIVER. HOW CAN I GET THIS TO WORK NEW TI?

  Original title: driver ethernet

  I NEED ASSISTANCE WITH MY ETHERNET DRIVER.  HOW CAN I GET THIS TO WORK NEW TI

  Download and install it

  The driver should be available in the manufacture of computers site

  Use the snid on a label on the computer to search with while you're there

  Or if the motherboard came with a disc to load and the reader will be on it.

• I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.

  I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.

  See http://support.microsoft.com/kb/931937