0x773faf47 referenced memory

Similar Questions

• Impossible to read the instruction at 0x6058e1a8 referenced memory at 0x00000008,

  Firefox.exe - Application error

  the instruction at 0x6058e1a8 referenced memory at 0x00000008. the
  memory could not be read.

  Click on OK to terminate the program.

   ( I see this a lot after I exit a screen or page )
  

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 26: http://www.mozilla.org/en-US/firefox/all.html

  If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.

  • Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you lose personal data such as bookmarks and passwords from other versions of Firefox profiles.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  If you keep problems also create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• The instruction at "0x03925a9c" referenced memory at "0x03925a9c". The memory could not be written.

  I don't know why I continue to install the latest version when the previous version works fine, but I do. So this time it gave me an error when I start Skype... The instruction at "0x03925a9c" referenced memory at "0x03925a9c". The memory could not be written.

  The only options it gives me is to terminate the program or to debug, which one of the two closes just for Skype. I have not tried to make a call, same Skype2Skype, but I know very well, I can talk as long as I do not click on the OK or CANCEL buttons and just move the window behind the others, this is not a problem. I tried to uninstall Skype and resettlement and who does not. Even tried out hacking the registry, and the same error comes back upward after a reinstallation. I'd hate to reinstall my OS it takes do someday, because of all the programs that I need to install again. Don't know what I can do to solve this problem. I tried the MS registry Fixer thing and found some things and repaired them, but still does not solve my problem of Skype.

  Alternatively, you can first try to uninstall the currently installed version of 6.18 and install Skype 6.14.0.104 version:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

• 0X1005A40A ERROR MESSAGE REFERENCED MEMORY 0 X 00000024

  0x1005a4a error message referenced memory 0 x 00000024. The memory could not be read. Click on ok to terminate the program. This message appears whenever I leave firefox. I uninstalled and reinstalled firefox and the message still appears. Please notify

  This has happened

  Each time Firefox opened

  Is about two to three weeks ago

  Window crash reporter comes upward?

• App error: instruction at 0x7c911389 referenced memory at 0 x 00000010 memory could not be read.

  Desktop HP Pavilion (a710n) keeps making the message: the instruction at 0x7c911389 referenced memory at 0x00000010. Memory could not be 'read' click ok to terminate the program - every time that the computer shuts down and many other random times. It prevents downloads to install now?

  Windows 8 is different from its predecessors.  This site contains tutorials for several new features for Windows 8. Once I adjusted to the differences in Windows 8, I found that I enjoyed the operating system.  Keep in mind that the Windows 8.1 is available in beta form if you want to see what can come from the changes.  If you choose to test Windows 8.1, don't forget to do your first recovery disks, then you can return to a factory State if you do not like Windows 8.1.  More information on Windows 8.1 overview can be found here.

• I get the message: education @0x74d3f290 referenced memory @ 0x74d3f290. The memory could not be written.

  Original title: memory problem

  I get the message: education @0x74d3f290 referenced memory @ 0x74d3f290.  The memory could not be written.

  Any suggestions?

  try running Memtest86 +, which runs from a floppy disk or CD and should eliminate or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours, so no errors at that time then your ram is OK.
  http://www.memtest.org/

  What were you doing at the time?

• The instruction at "0x7c9105f8" referenced memory at "0x08c60010". The memory could not be 'read'.___Click on OK to terminate the program.

  My problem is that whenever I try to open a game, I get the error message that

  "The instruction at"0x7c9105f8"referenced memory at"0x08c60010". The memory could not be "read".

  Click on OK to terminate the program. »

  and I have to close the program.

  Hi Dani,

  1. who is the edition of Windows that is installed on the computer?
  2. what game you try to play?

  Try these steps and check the result.
  Step 1: Run the memory diagnostic tool
  a. see diagnosis of problems of memory on your computer
  b. Once you correct the errors, check if the problem persists.

  Step 2: Check the game sellers website to see if there are updates or patches for the game and install it.

  Step 3: If the problem persists, uninstall and reinstall the game and then check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Explorer.exe error of Application the Instruction at '0x7c910ed2' referenced memory at 0x03ede088.

  always get this when I try to open certain files? any suggestion will be good?

  Explorer.exe error of Application the Instruction at "0x7c910ed2" referenced memory at "0x03ede088", the memory could not be 'read' click OK to terminate the program, click CANCEL to debug the program

  I also have error of Application Explorer.exe the Instruction "0x7c911689" referenced memory at "0 x 04180000", the memory could not be 'read' click OK to terminate the program, click CANCEL to debug the program

  Good.

  Not sure what it is yet, but you know what it is not.

  I don't know what to think of your permissions problem, but if records are read-only and not meant to be, are you not able to change the folder properties and what happens when you try to do?

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
  You can Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to act normally, you'll know that some extension you just disabled in this group of 3-5 is the culprit, then you can start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.

  Disable them one at a time or in small groups (to make things go faster) until your right click does not generate an error, and then restart and try again.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• QuickBooks error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read".

  I am running Windows XP Professional Version 2002 w/SP3. QuickBooks Pro 2008 is installed on it. Whenever I close the program, I get an error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read". I have absolutely no idea of what that means. The message will only appear when it terminates the program and does not do. Any info is greatly appreciated.

  Hi stickman397,

  This error occurs during the installation of QuickBooks is damaged. To resolve this problem, follow the steps in the link below:

  http://support.QuickBooks.Intuit.com/support/pages/knowledgebasearticle/1008533

  Kind regards

  Imran M

  Microsoft technical support

• Svchost.exe 0x7c919af2 referenced memory at 0 x 00000010 memory could not be "written".

  It appears each time I start my computer: svchost.exe 0x7c919af2 referenced memory at 0 x 00000010 memory could not be "written".

  Then a total of 3 BACK Windows pop open, titled in reference to MSE, which close shortly after.

  Code title: original error: 0x7c919af2
  And then my Firewall is NOT on.

  It started a few days, after having spent a lot of time and effort trying to run after failed installs updates for .NET framework. It is unclear what I screwed up.

  Using WIN XP Pro SP3.

  If you mean you see messages like this:

  Svchost.exe at startup
  Application error: the instruction at "0x7c91b21a" referenced memory at "0x00000010". Memory could not be "written".
  The instruction at "0x7c91b21a" referenced memory at 0x00000010 ".
  application 0x7c91b21a error 0x00000010
  The instruction at "0x7c928fea" referenced memory at "0x00000010". The memory can not be "written".

  Why isn't your firewall on?

  This is a popular remedy for this situation:

  It seems that the last update for Windows Media Player may contribute to this problem when the system has the Windows Driver Foundation Service active and running.

  Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you should disable the WDF Service.

  Click Start, run and enter in the box:

  services.msc

  Click OK to launch the Services Applet

  Locate the Windows Driver Foundation - User-mode Driver Framework Service, right-click right the Service, select properties and choose disabled and OK your way out of the Services Applet to save the changes.

  Note that you will not be able to 'Stop' Service first, but it's OK.

  Restart your system (the WDF service is now disabled) and check your failure condition now.

• Explorer.exe Application error the instruction at "0x5ad8c78d" referenced memory at "0x082c9c7". The memory can be "read".

  I am running Mirosoft Windows XP Professional Version 2002 Service Pack 2

  Before that, I really want to customize my windows and then I search in google "how to customize windows xp visual styles. After that, I follow the 7 steps how to customize. This is the link I will:

  http://www.WikiHow.com/customize-Windows-XP-visual-styles

  Then, after I followed the steps, it asks me to install this: Neowin patch. When I installed it, it says that my OS is not original, but I just reinstalled the last time.

  Are the cause of the problems of the patch that I installed it in the first place?

  Is it related with my OS?
  How to solve this problem?
   
  URGENT!

  Hello

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it looks like you are facing a problem with the Windows XP operating system.

  It would be great if you could answer these questions to help you further.

  1. When you receive this error message, Explorer.exe Application error the instruction at "0x5ad8c78d" referenced memory at "0x082c9c7". The memory can be 'read '?

  2 is the issue limited only to Neowin patch installation?

  There could be a conflict of memory with a driver or due to the bad memory or memory.

  I recommend you to check with the activation status of Windows XP.

  a. Click Start.

  b. click on all programs, then accessories.

  c. click System Tools.

  d. click on activate Windows.

  Windows XP Visual Styles, see the steps in the following Microsoft article.

  http://msdn.Microsoft.com/en-us/library/aa289524 (v = vs. 71) .aspx

  http://msdn.Microsoft.com/en-us/library/5d1acks5.aspx

  Keep us informed on the status of the issue.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• When I close Wordpad I get this error: "the instruction at 0x7c910b2c referenced memory at 0x01c801c0. The memory could not be "written". »

  Every time I close wordpad in XP I get the same error message 'the instruction at 0x7c910b2c referenced memory at 0x01c801c0. The memory could not be "written". "

  When I click OK to close this dialog box comes another upwards, back to "the instruction at 0x7c910a19 referenced memory at 0x01c801c0. The memory could not be "read". "

  I don't have any idea what is wrong. I tried to remove and reinstall wordpad but that did not help.

  original title: Error closing wordpad

  Hello

  Disable DEP (Data Execution Prevention) for Wordpad and see if it helps.

  a: Click on Start > run

  b: Type Control Panel in the Run dialog box and click on enter.

  c: then click on System , then Advanced System settings.

  d: then click on the settings button under Performance.

  e: Then click on Data Execution Prevention tab.

  f: Now select the option " turn on DEP for all programs and services except those I select. "

  g: now click Add , and then select Wordpad.exe

  h: click apply , then ok.

  Hope this information helps.

• Receive the error message"Sims2.exe - Application error: the instruction at"0x6678e86b"referenced memory at"0x011a3000 ". The memory cannot be 'read - at the opening of the Sims 2

  Original title: I get this weird error when I opened the Sims 2. Can someone help me?

  When I opened the Sims 2, I get this error:
  Application popup: Sims2.exe - Application error: the instruction at "0x6678e86b" referenced memory at "0x011a3000". The memory could not be "read".

  Click OK to terminate the program
  Click on CANCEL to debug the program

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  I have no idea what this means or what to do. Help, please!
  David

  Thanks for the info, it did not work, but uninstalling and reinstalling have. Thank you very much for your help!

• Error: "the instruction at 0x010acd0c referenced memory is not able to be read. "SQLDUMPER library not initiation" to start Windows XP.

  Original title: SQLDUMPER library initiation.

  From the start of my computer, I get the following error message:

  "The instruction at 0x010acd0c referenced memory is not able to be read. "SQLDUMPER library not initiation.

  What can be done to perfect this problem?

  Dump SQL program is a program that helps you to debug the SQL database on your system crashes.

  If you don't have SQL Server installed on your system or don't know what it means, that the software SQL debugging could subsist a trial version of the software you installed and uninstalled then more late leaving the program SQL dump and now he doesn't know what to do with himself.

  Take a look in Add/Remove programs to something like this:

  Microsoft SQL Server VSS Writer

  If find you it and know that you are not using SQL Server, uninstall Microsoft SQL Server VSS Writer, restart and see what things look like.

• Svchost.exe - application error - the instruction at 0x7c919af2 referenced memory at 0 x 00000010, that memory could not be written

  Windows XP Professional and service pack 3 to have also internet exploror 8 install_ at startup I get this error message - the instruction at 0x7c919af2 referenced memory at 0x00000010 the memory could not be written

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/svchostexe-application-error-the-instruction-at/700e7092-7359-E011-8dfc-68b599b31bf5

  http://www.GeeksToGo.com/forum/topic/231828-0x7-errors/

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/error-message-on-boot-up-svchostexe-application/a1d7a2c2-2a9b-4145-A149-04ac389c0ffa

  Click on these links for possible solutions to your problem.

  Also, check out the related discussions, below your question.