0xc0000094 Setup.exe application error occurred in the application at location 0x00498e1b
Printer HP Photosmart Prem C410a - Windows 7 64 bit - downloaded the driver - after extraction at 99% - the dialog box has disappeared - no niche diaolog appear setup.exe - error - Application error the entire division by zero 0xc0000094 occurred in the application at location 0x00498e1b
Hello
Please try following the steps below and check any changes:
http://support.HP.com/us-en/document/c03030583
Summary or...
Launch the installation of the printer,
Immediately that you will get the error message, run the following patch and check any changes:
http://ftp.HP.com/pub/softlib/software12/COL40390/OJ-98352-1/HPAMDC50PATCH.exe
Tags: HP Printers
Similar Questions
-
I've been a fight 2 days now trying to improve my iMac 21.5 2009 end of Mavericks in El Capitan, but as the installation is about to be launched I get this message "an error occurred during the preparation of the installation. Try running the application again".
Here is a list of all the things I've tried:
Running the application again;
Move the installation to another folder application;
Control date & time and it was already correct;
Do the installation in safe mode;
Installation of the upgrade of another user I created only for that purpose;
The computer restarts and I tried install the upgrade several times;
And, to be sure that the installation application was not corrupted I made a copy of it on an external HD and tried to install it on my 2011 MacBook Air and it worked (I didn't install because I have El Capitan installed on my MacBook).
Well, I don't know what else can be done, and I'd rather not have to completely restore my iMac.
Please try installing again after taking each of these steps you have already taken it.
Step 1
Reset the PRAM from your computer.
Step 2
If possible, set the clock system as indicated here. If you can only boot into recovery mode, see below.
In the OS X Utilities screen, select get online help. Safari will launch. While in recovery, you will have no access to your bookmarks or history. Load this web page.
Triple-click anywhere in the line below to select:
date 0801000014
Copy the selected text in the Clipboard by pressing Control-C key combination.
Quit Safari. You go back to the OS X Utilities screen.
Select
Utilities ▹ Terminal
in the menu bar. It will open a Terminal window. Paste in the window by pressing the command-V key combination.
Wait for a new line ending with a dollar sign ($) below what you entered. If it does not appear, press return.
Quit the Terminal to return to the main screen.
Step 3
If your model has replaceable memory by the user and you have upgraded modules of memory, reinstall the original memory and see if there is any improvement. Make sure not to touch the Gold contacts. Clean them with a mild solvent such as rubbing alcohol. Spare memory must exactly match the technical specifications of the machine. Do not install more memory to the maximum value specified, even if a seller of RAM, or someone else, said you that it will work.
Step 4
Back up the data at least two different storage devices, if you haven't done so already. A backup is not enough to be sure. Backups are possible with Time Machine or disk utility. Preferably both.
Erase and install OS X. This operation will destroy all the data on the boot volume, if you be better be sure backups.
-
An error internal occureed in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302
original title: an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302
Hello Stephen,
try to run the "Startup Repair" utility located on your installation DVD.
hope this helps
Eddie B. -
I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?
I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?
You have posted in forum Windows XP hardware and drivers. You should have posted in forum Windows 7, probably the forumprograms .
If you post here, remember to include the name of the application that could not be loaded. Is Yahoo Messenger? Something else ("all applications for which I get this error")?
Your question is also confusing: you get this error message every time that you do a reboot?
You can use msconfigor Autoruns (look at the 'Connection' tab) to temporarily disable programs that start automatically when you log in to isolate the application that is causing the problem.
-
Hello
I can't update the audio driver on my PC. When you try to install the driver (new sound card), I get the following message is displayed:
There was a problem installing this hardware:
An error occurred during the installation of the device
"The IO operation has been abandoned due to a thread exit or an application request."
The driver worked fine on this computer until a month ago. I think it's more a problem of Windows installation as a driver issue, but I do not know where to go from here. Any suggestions?
Thank you
I tried to install the sound card on different PCI expansion slots. I get the same message trying to install a USB sound card. The sound properties in the control panel are classified outside (non-active)Hello Smachbub,
Thank you for your message. Let's try one or two different things. Please follow step by step.1. we will try to completely remove the previous sound card driver, then reinstall.Click 'Start' > right click on 'My computer' > select 'manage '.Click on Device Manager.Click the (+) sign next to "sound, video and game controllers".Below, you should see your audio card, right click and select "Properties".Select the 'Drivers' tab and click 'uninstall '.After uninstalling the driver, reboot and go to your computer manufacture or website of the manufacturer of the sound card and download/install the latest driver for your device.If problems persist, try this same process as a new profile.2. to create a new profile:Click 'Start' > right click on 'My computer' > select 'manage '.Double-click 'Users and groups' > select 'users '.In the right pane, right click and select 'add a new user '.Fill in the appropriate information, and then select 'create '.The new user must be added, right click on the new user and select "Properties".Select the tab "member of ' and click on 'Add '.Type Administrators and click on "check names".Once the name is entered correctly, click 'OK '.Log off your computer and connect with the new credentials. Then try removing and reinstalling the driver.Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
original title: Lost Forever?
After you change the permissions for an external hard drive, I was unable to open the files on this disc. Then I tried to reverse what I did and when I choose apply I get the message error "an error occurred during the application of the security information to G:\. Trash' access denied. the user, I'm changing the permissions is "creator/owner.
If you choose to continue you get the same error message with different location after g:. If you click Cancel the message is ' stop the spread of the permissionsettings leads to a contradiction of State in which some objectshave settings but others not. " If you have made the change by mistake, you must apply the correct change immediately. to achieve a consistent state. I don't know what I did wrong. do not remember because she has been veterinary disabled brain damaged. Thank you!
Hello
You must take ownership of files and folders. Do follow link below:
Troubleshoot "access denied" when opening files or folders
-
Original title: Error 502
How to fix "an internal error occurred in the initialization stage. The application cannot be loaded, please, seller contact application, Error 502 "after installing Yahoo Messenger
Hello
1. Once you get this error?
2 are connected to any computer in the domain?
3. have you made changes on the computer before this problem?
I suggest you try to uninstall and reinstall Yahoo Messenger and check if it helps.
Uninstall a program:
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
Install a program: http://windows.microsoft.com/en-US/windows-vista/Install-a-program
If uninstalling and reinstalling Yahoo Messenger did not help, then it would be better to post the same question in community Yahoo for assistance.
Community of Yahoo: http://help.yahoo.com/l/us/yahoo/helpcentral/community_index.html
Hope the information is useful.
-
Hello
IM using fb 4.7 air sdk with xcode 6.1 10.9.4, Macosx 15.0.0.349 (8.1 ios Simulator) and I still get the following response when you debug with ios Simulator:
Error occurred during the installation of the application:
Session ended with error (null)
Can you help me? Is this a bug being fixed yet?
Thank you.
zed0784
Hello
The issue is fixed and will be available in the next beta of the AIR SDK.
Now, try the fix
Download BSI https://www.dropbox.com/s/sffwx8um12lkrzy/isb?dl=0
Replace it with that of
/lib/aot/bin/isb/isb
Thank you
Govind
-
Error occurred during the application of packaging: Android - x 86
Hello
I tried to export ARMAMENTS existing Android for Android - x 86:
This application uses to 2 ANE for In - App purchases. One for iOS and another for Android. I repacked the Android DONKEY file to be compatible with Android - x 86 and I also add the new Flash Builder ""-arch ' with the value of "x 86" and place it before '-shops ". "
Error occurred during the application of packaging:
output file is not writable
use:
ADT - checkstore SIGNING_OPTIONS
ADT-certificate - cn < name > (-UO < org - unit >)? (o < org - name >)? (-c < country >)? (- validityPeriod < years >)? (1024 RSA: 2048-RSA) < pfx file > < password >
ADT-help
ADT-migrate SIGNING_OPTIONS (< air-file-in > | < flown-file-in >) < fichier_resultat >
ADT-package SIGNING_OPTIONS (-aerial target)? <>Package-output (FILE_OPTIONS < app-desc > | < input-package >)
ADT-package SIGNING_OPTIONS-target flown < output-package > (< app-desc > FILE AND PATH OPTIONS | < input-package >)
ADT-package - target (apk | apk-debug | emulator apk | apk-captive-runtime) (CONNECT_OPTIONS? |) LISTEN_OPTIONS? ) (- airDownloadURL < url >)? (ARCH_OPTIONS)? SIGNING_OPTIONS < output-package > (< app-desc > PLATFORM-SDK-OPTION?) FILE-AND-PATH-OPTIONS | PLATFORM-SDK-OPTION < input-package >? )
ADT-package - target (ipa-test | ipa-debug | ipa-app-store | ipa-ad-hoc: ipa-test-interpreter | ipa-debug-interpreter | ipa-test-interpreter-Simulator | ipa-debug-interpreter-simulator) (CONNECT_OPTIONS? |) LISTEN_OPTIONS? ) (- sampler)? ANE_LINK_OPTIONS? AOT_MODE_OPTIONS? SIGNING_OPTIONS < output-package > (< app-desc > PLATFORM-SDK-OPTION?) FILE-AND-PATH-OPTIONS | PLATFORM-SDK-OPTION < input-package >? )
ADT-package SIGNING_OPTIONS? -target native SIGNING_OPTIONS? <>Output-package (< app-desc > FILE AND PATH OPTIONS | < input-package >)
ADT-package SIGNING_OPTIONS? -migrate SIGNING_OPTIONS-target native SIGNING_OPTIONS? OPTION-PATH < output-package > < app-desc > FILE_OPTIONS
ADT-package SIGNING_OPTIONS? -bundle target SIGNING_OPTIONS? <>Output-package (< app-desc > FILE AND PATH OPTIONS | < input-package >)
ADT-package SIGNING_OPTIONS? -target the donkey < output-package > < ext-desc > ANE_OPTIONS
ADT-prepare < airi-file > < app-desc > FILE_AND_PATH_OPTIONS
ADT-sign SIGNING_OPTIONS (-target (air: flown | ane))? (< airi-file > | < unsigned-ane-file >) < fichier_resultat >
ADT-devices OPTION of platform PLATFORM-SDK-OPTION?
ADT - installRuntime OPTION of platform PLATFORM-SDK-OPTION? DEVICE OPTION? (- < apk file > package)?
ADT - installApp OPTION of platform PLATFORM-SDK-OPTION? DEVICE OPTION? -package < apk file. IPA-file >
ADT - uninstallRuntime OPTION of platform PLATFORM-SDK-OPTION? DEVICE OPTION?
ADT - uninstallApp OPTION of platform PLATFORM-SDK-OPTION? DEVICE OPTION? -appid < app - id >
ADT - launchApp {OPTION of platform PLATFORM-SDK-OPTION? DEVICE OPTION? (port - debuggerPort)? -appid < app id >}
ADT - runtimeVersion OPTION of platform PLATFORM-SDK-OPTION? DEVICE OPTION?
ADT - appVersion OPTION of platform PLATFORM-SDK-OPTION? DEVICE OPTION? -appid < app - id >
ADT-version
SIGNING_OPTIONS:-< type > stores (-< store > keystore)? (- storepass < pass >)? (- alias < aliasName >)? (- keypass < pass >)? (- providerName < name >)? (- tsa < url >)? (- service-profile <>layout)?
FILE_OPTIONS: < fileOrDir > * ((C-< dir >< fileOrDir > +) |) (-e < file > < path >)) *
ARCH_OPTIONS:-arch (armv7 | x 86)
CONNECT_OPTIONS:-connect < host >
LISTEN_OPTIONS:-listening < port >
ANE_LINK_OPTIONS:-hideAneLibSymbols (yes | no)
ANE_OPTIONS:-CFC < EFA > (-platform < name > (-platformoptions < file >). < fileOrDir > * (C - < dir > < fileOrDir > +) *) *.
FILE-AND-PATH-OPTIONS: (OPTION-PATH |) FILE - OPTIONS) - AND-PATH-FILE OPTIONS?
OPTION: PATH - extdir < dir >
Platform-OPTION:-platform (android: ios)
PLATFORM-SDK-OPTION:-platformsdk < platform-sdk-home-dir >
OPTION: DEVICE-device (deviceID | ios simulator)
AOT_MODE_OPTIONS:-useLegacyAOT (yes | no)
Hello
I am able to repro the bug, if I change the 'DEMAND' while packing the apk and change it to "somedirectory/helloworld.apk' to 'helloworld.apk '. So a quick solution would be to remove all path and do simple APPLICATION parameter value 'helloworld.apk' when packing with - arch argument.
Also, there is a known issue with FB4.7 that it will fail to install the APK for Android device when they are packed with the option Ark on export Release version. So always choose option 'Keep bin-release-temp file' that will keep the APK even if FB fails to install/launch of the device.
-Nimisha
-
Original title: uninstall avast anti virus and then install AVG anti virus
I received the following error message when trying to install AVG anti virus after removing the 5.0 version 4.8 and installation, then after you uninstall 5.0, I tried AVG anti virus. Error 1935. an error occurred during the installation of Assembly 'microsoft. VC90. ATL, version = "9.0.30729.4148", publicKeyToken = "1fc8b3b9a1e18e3b" processorArchitecture = "x 86", type = "win32". If anyone has encountered this before?
Hello
Before upgrade you to the next version of AVG you will need to disable the resident shield. See the article below for more information.
3882 update AVG 9.0 from AVG 2011 fails with Error 1935
http://www.Avg.com/ww-en/FAQ-print.Num-3882I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
After download, ' an error occurred during the preparation of the installation.
Ok. I'm not very good with computers, so I'm going to do my best here:
I downloaded El Capitan last night, did the installation and rebooted. The questions endless gray on the screen. Relaunched in LANDAU several times; Install still 'stuck' 31 minutes downloading - every time. Restarted in safe mode; install 'stuck' 24 minutes - every time. I did the safe mode--> reinstalling OS X, which then made me download 'additional components' and then restarted automatically. That put me right back to get 'stuck' to 24 minutes Setup.
I could then go back to my previous OS X 10.7.5 then in safe mode (I don't remember how). I have so found the OS X 10.11 El Capitan install file in my applications folder, tried running the installer again and got "an error occurred during the preparation of the installation. Try to run the installation again. "I tried several times over with no different results. I checked the date in the terminal; It is correct. So I deleted the application (ten hours later!). Re-uploaded El Capitan on the App Store on the day the next day and just tried to run the installation program and still get "an error occurred during the preparation of the installation. Try to run the installation again. »
I do not have a "clean"... installation I didn't really know what it was before all these questions. All my stuff is backed up via Time Machine on an external hard drive that...
Any advice would be so appreciated. I am at a loss at this point.
Thank you!
So, everything was OK, two days ago? On Lion OS?
Of course, there was a hiccup during the installation. you said "makes installation and restarted."
During the installation (Setup in the applications folder), it restarts after installation, it installs effectively while restarting. So I guess the installation never finished, maybe because you the restarted.
This means that your operating system 'old' is always on it, but not completely healthy because of the "accidents" caused by ElCapitan failure install.
So I propose:
Connect your Time Machine disk (when not connected), start in the RecoveryPartition Time Machine restore, choose a date before that you tried to install ElCapitan, let him finish completely, it restarts automatically (I think). Then you are back where you started.
-
Following error message encountered when installing SSO64 bits on Windows Server 2008 R2 Standard 64-bit edition.
Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.
[12:40:34 of Info] List MessageBox with text: Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC. Return code: 1I tried to reinstall VC ++ 2005 SP1 Redistributable, but it did not work.
I tried to rename a folder for vc ++ in the winsxs folder, but without permission to do so.
Here's the Setup log:
= Recording started: 01/03/2012-12:40:11 Build type: SHIP UNICODE 5.00.7600.00 appeal process: C:\Users\SA_KPN~1\AppData\Local\EBZ28334.tmp\Setup.exe =.
MSI (c) (C0:58) [12:40:11:525]: Resetting cached policy values
MSI (c) (C0:58) [12:40:11:525]: value of strategy Machine 'Debug' is 0
MSI (c) (C0:58) [12:40:11:525]: * RunEngine:
Product: SSO x64\SSO64\SSO64.msi
Action:
Command line:
MSI (c) (C0:58) [12:40:11:525]: Client and UI is none or basic: full installation running on the server.
MSI (c) (C0:58) [12:40:11:525]: grabbed execution mutex.
MSI (c) (C0:58) [12:40:11:525]: Cloaking enabled.
MSI (c) (C0:58) [12:40:11:525]: attempt of activation of all disabled privileges before calling install on server
MSI (c) (C0:58) [12:40:11:525]: meter is incremented to disable the stop. Counter after increment: 0
MSI (s) (C AC:3) [12:40:11:525]: running the installation inside the multi-package transaction \SSO x64\SSO64\SSO64.msi
MSI (s) (C AC:3) [12:40:11:525]: grabbed execution mutex.
MSI (s) (AC:64) [12:40:11:525]: Resetting cached policy values
MSI (s) (AC:64) [12:40:11:525]: value of strategy Machine 'Debug' is 0
MSI (s) (AC:64) [12:40:11:525]: * RunEngine:
Product: SSO x64\SSO64\SSO64.msi
Action:
Command line:
MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 0
MSI (s) (AC:64) [12:40:11:540]: value of strategy Machine 'DisableUserInstalls' is 0
MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 1
MSI (s) (AC:64) [12:40:11:540]: SRSetRestorePoint is ignored for this transaction.
MSI (s) (AC:64) [12:40:11:540]: disable the stop against the decrement. If counter > = 0, will be denied the stop. Counter after decrement: 0
MSI (s) (AC:64) [12:40:11:540]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3:2
MSI (s) (AC:64) [12:40:11:571]: file will have the applied safety of OpCode.
MSI (s) (AC:64) [12:40:11:587]: disable the stop against the decrement. If counter > = 0, will be denied the stop. Counter after decrement:-1
MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: Verifying package--> 'SSO x64\SSO64\SSO64.msi' against the software restriction policy
MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi has a digital signature
MSI (s) (AC:64) [12:40:21:603]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi is allowed to run at the level of authorization 'unlimited '.
MSI (s) (AC:64) [12:40:21:603]: dialogue of end not activated
MSI (s) (AC:64) [12:40:21:603]: original ==> SSO x64\SSO64\SSO64.msi packing
MSI (s) (AC:64) [12:40:21:603]: we're running out of ==> C:\Windows\Installer\1ebf5f91.msi package
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: replacements of compatibility mode properties found.
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
MSI (s) (AC:64) [12:40:21:619]: MSCOREE already loaded, using the loaded copy
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'TransformsSecure' is 1
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisablePatch' is 0
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'AllowLockdownPatch' is 0
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableLUAPatching' is 0
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableFlyWeightPatching' is 0
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
MSI (s) (AC:64) [12:40:21:619]: transformations are not secure.
MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding MsiLogFileLocation property. Its value is ' C:\Users\acc\AppData\Local\Setup(030112 124011) .log.
MSI (s) (AC:64) [12:40:21:619]: command line: ADDLOCAL = froot, server, SSOMMC, Admin, Pwdsync INSTALLDIR = c: Files\Enterprise Single Sign - dans\ FILESINUSEERROR = CURRENTDIRECTORY=C:\Users\acc\AppData\Local\EBZ28334.tmp CLIENTUILEVEL = 3 MSICLIENTUSESEXTERNALUI = 1 CLIENTPROCESSID = 3776
MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding PackageCode property. Its value is '{824AA89B-CCCC-4D40-A6D3-71DF21FEE110} '.
MSI (s) (AC:64) [12:40:21:619]: Product Code passed to Engine.Initialize: "
MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties before transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties after transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
MSI (s) (AC:64) [12:40:21:619]: unregistered product: first start installation
MSI (s) (AC:64) [12:40:21:619]: product {F89B22BC-2768-4237-B300-5CFA52D9AC84} is not supported.
MSI (s) (AC:64) [12:40:21:619]: MSI_LUA: invites of credentials not required, the user is an administrator
MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding ProductState property. Its value is '-1'. '.
MSI (s) (AC:64) [12:40:21:619]: entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (AC:64) [12:40:21:634]: value 'SearchOrder' user policy is 'nmu '.
MSI (s) (AC:64) [12:40:21:634]: adding new sources is allowed.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding PackagecodeChanging property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:634]: Package name extracted from package path: 'SSO64.msi '.
MSI (s) (AC:64) [12:40:21:634]: package be registered: "SSO64.msi."
MSI (s) (AC:64) [12:40:21:634]: Note: 2 1: 2262: AdminProperties 3:-2147287038
MSI (s) (AC:64) [12:40:21:634]: Machine policy value 'DisableMsi' is 1
MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'AlwaysInstallElevated' is 0
MSI (s) (AC:64) [12:40:21:634]: "AlwaysInstallElevated" user policy value is 0
MSI (s) (AC:64) [12:40:21:634]: product installation will be high because the user is admin, and the product is to be installed by computer.
MSI (s) (AC:64) [12:40:21:634]: the product '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' is running with elevated privileges: product is affected.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding ADDLOCAL property. Its value is "froot, server, Admin, SSOMMC, Pwdsync.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding INSTALLDIR property. Its value is "C:\Program Files\Common Files\Enterprise Single sign-dans\ '."
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CURRENTDIRECTORY property. Its value is 'C:\Users\acc\AppData\Local\EBZ28334.tmp '.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MSICLIENTUSESEXTERNALUI property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTPROCESSID property. Its value is "3776".
MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (AC:64) [12:40:21:634]: MANAGER of REBOOT: disabled by the property MSIRESTARTMANAGERCONTROL. Windows Installer uses the built-in functionality of FilesInUse.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MsiSystemRebootPending property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:634]: TRANSFORMS property is now:
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding VersionDatabase property. Its value is "200".
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Favorites
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Network shortcuts
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Documents
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Printer shortcuts
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Local
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Pictures
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start start\program
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu\Programs\Administrative C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start of Directors
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start start\program
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Desktop
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (AC:64) [12:40:21:650]: Note: 1: 2898 2: MS without Serif 3: MS without Serif 4: 0 05:16
MSI (s) (AC:64) [12:40:21:650]: MSI_LUA: the MsiRunningElevated of the parameter property to 1 because the installation is already running high.
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding MsiRunningElevated property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding privileged property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding USERNAME property. Its value is 'KPN '.
MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding COMPANYNAME property. Its value is 'KPN '.
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding a DATABASE property. Its value is 'C:\Windows\Installer\1ebf5f91.msi '.
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding OriginalDatabase property. Its value is "SSO x64\SSO64\SSO64.msi...............................
................................
Property (S): GPTSupport = 1
Property (S): OLEAdvtSupport = 1
Property (S): ShellAdvtSupport = 1
Property (S): MsiAMD64 = 6
Property (S): Msix64 = 6
Property (S): Intel = 6
Property (S): PhysicalMemory = 3840
Property (S): VirtualMemory = 4312
Property (S): AdminUser = 1
Property (S): MsiTrueAdminUser = 1
Property (S): LogonUser = acc
Property (S): UserSID = S-1-5-21-1305377269-4159824490-449157577-297538
Property (S): UserLanguageID = 1033
Property (S): ComputerName = W1613
Property (S): SystemLanguageID = 1033
Property (S): ScreenX = 1024
Property (S): ScreenY = 768
Property (S): CaptionHeight = 19
Property (S): BorderTop = 1
Property (S): BorderSide = 1
Property (S): TextHeight = 16
Property (S): TextInternalLeading = 3
Property (S): ColorBits = 32
Property (S): TTCSupport = 1
Property (S): Time = 12:40:37
Property (S): Date = 01/03/2012
Property (S): MsiNetAssemblySupport = 2.0.50727.4927
Property (S): MsiWin32AssemblySupport = 6.1.7600.16385
Property (S): RedirectedDllSupport = 2
Property (S): MsiRunningElevated = 1
Property (S): The privilege = 1
Property (S): Name of USER = KPN
Property (S): COMPANYNAME = KPN
Property (S): basis of DATA = C:\Windows\Installer\1ebf5f91.msi
Property (S): OriginalDatabase = SSO x64\SSO64\SSO64.msi
Property (S): UILevel = 2
Property (S): MsiUISourceResOnly = 1
Property (S): Preselected = 1
Property (S): ACTION = INSTALL
Property (S): AccountAuthenticatedUsers = authenticated users
Property (S): AccountCreatorOwner = CREATOR OWNER
Property (S): AccountPowerUsers = power users
Property (S): AccountUsers = Users
Property (S): ROOTDRIVE = D:\
Property (S): CostingComplete = 1
Property (S): OutOfDiskSpace = 0
Property (S): OutOfNoRbDiskSpace = 0
Property (S): PrimaryVolumeSpaceAvailable = 0
Property (S): PrimaryVolumeSpaceRequired = 0
Property (S): PrimaryVolumeSpaceRemaining = 0
Property (S): INSTALLLEVEL = 1
Property (S): Complus_XML_Data =Property (S): SOURCEDIR = SSO x64\SSO64\
Property (S): SourcedirProduct = {F89B22BC-2768-4237-B300-5CFA52D9AC84}
Property (S): ProductToBeRegistered = 1
MSI (s) (AC:64) [12:40:37:260]: Note: 1: 1708
MSI (s) (AC:64) [12:40:37:260]: product: Microsoft Enterprise Single Sign-On - the Installation operation failed.MSI (s) (AC:64) [12:40:37:275]: Windows Installer installed the product. Product name: Microsoft Enterprise Single Sign-On. Product version: 6.0.0245.0. Product language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (AC:64) [12:40:37:275]: see clean files/packages, if there
MSI (s) (AC:64) [12:40:37:275]: MainEngineThread returned 1603
MSI (s) (C AC:3) [12:40:37:275]: sequence number number for this installation system restore.
= Logging stopped: 01/03/2012 12:40:37 =.
MSI (s) (C AC:3) [12:40:37:275]: strategy user 'DisableRollback' is 0
MSI (s) (C AC:3) [12:40:37:275]: policy value 'DisableRollback' Machine is 0
MSI (s) (C AC:3) [12:40:37:275]: meter is incremented to disable the stop. Counter after increment: 0
MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
MSI (s) (C AC:3) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop. Counter after decrement:-1
MSI (s) (C AC:3) [12:40:37:275]: restoration of the environment variables
MSI (s) (C AC:3) [12:40:37:275]: object to destroy RemoteAPI.
MSI (s) (C AC:3) [12:40:37:275]: end of thread Custom Action Manager.
MSI (c) (C0:58) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop. Counter after decrement:-1
MSI (c) (C0:58) [12:40:37:275]: MainEngineThread returned 1603
= Recording stopped: 01/03/2012 12:40:37 =.Hello Philippe Gupta.
Since the question you posted is on a Windows Server 2008-based computer, the question would be better suited on the TechNet support forum. Then I suggest you to post the question on the following link.
-
* Title *.
"An error occurred during the installation of assembly" Microsoft.VC80.CRT, version = "8.0.50727.4053", type = "win32", publicKeyToken ='1fc8b3b9a1e18e3b ", processorarchitecture ="x 86". See Help and Support for more information. HRESULT:0X800736FDWindows xp to Windows 7 32 bit install home premium. iTunes will not install. Installation hangs on publishing product information, gives this error message:
"An error occurred during the installation of assembly" Microsoft.VC80.CRT, version = "8.0.50727.4053", type = "win32", publicKeyToken ='1fc8b3b9a1e18e3b ", processorarchitecture ="x 86". See Help and Support for more information. HRESULT:0X800736FD
remains frozen and finally claims iTunes has been installed properly. Open iTunes generates an error indicating that Apple application support is not installed (Apple application support for mobile device support/Apple are not on the computer). (Software update Apple Hello and Quicktime are there).
I uninstalled programs that is fine, but try anything I can get itunes working. I tried to install itunes 8.0, running on a different administrator, as an administrator user, stopping all programs from running and installation in offline. I've read that it could be a problem with Microsoft Visual C++ 2005. My computer shows redistributable Microsoft Visual C++ 2005 and Microsoft Visual C++ 2008 Redistributable - x 86 9.0.21022.218 on this subject.I tried to install the
Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update file vcredist_x86.exe found at http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-40ff-b072-9112bab119c2&displaylang=en#filelist
but it freezes at around 100% completion.It is here where I am now. My Windows updates were not fault and my system is up to date. I don't know what to do as I need this program installed to be able to use my phone.
I thank you for your time and assistance, you might be able to offer.
-Daniel
I reinstalled Windows 7.
Good luck other people having the same problem.
-
I'm familiar with Oracle databases, but still learning my way around PeopleSoft administration.
After validating the connection information of database with sqlplus from the same platform, psadmin application server start command generated an error message in the console.
tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler
After the attempt failed to start the 8.49 application server, the journal entries were:
PSAPPSRV.55837058 (0) [28/09/15 09:30:31] (4) the Configuration of server settings: {Journal
Ging level = 5, sql trace = 12319, mask of trace sql client = 12319, peoplecode trace = 0,
mask trace client PC = 4095, timeout = 300, County recycling = 2000, max such svc fail
ures = 2, ORACLE, database name database type of == 'DBXX', database server = ", id = user
'PXXXXX', connect id is "CXXXXXX"}
...
PSAPPSRV.55837058 (0) [28/09/15 09:30:32] (1) GenMessageBox (0, 0, M): If the database
gnon: could not sign database DBXX with user PXXXXX.
PSAPPSRV.55837058 (0) [09:30:32 ago] (0) 28/09/15 start the server failed
PSWATCHSRV.6685110 (0) [28/09/15 09:30:33] closing
PSADMIN.58196170 (0) [28/09/15 09:30:39] (0) attempt to end on the dbxx field boot
While the connectivity of sqlplus had tested OK from a client, PeopleSoft Signon pside.exe two levels on the same client Windows resulted in Invalid User ID and password for the access code.
The psaccessprfl table had been updated with the connection of data validated by using a platform application server dms shell script.
The area has been configured using the application server platform psadmin. UserId, UserPswd, ConnectID and ConnectPswd had been entered and verified. Passwords have been encrypted by the suite.
The psoprdefn table showed correct SYMBOLICID uppercase and ACCTLOCK is zero on behalf of PXXXXX.
The psaccessprfl table showed too correct SYMBOLICID.
The psdbowner table showed the DBNAME and OWNERID both uppercase.
The values encrypted in the database matched other environments on the same server platform.
Why app server not sign to the Oracle database?
Using the pscfg.exe, Manager of the Windows client configuration utility, I selected the 5 first checkboxes dialog SQL Trace on the left side of the tab of the Trace, I entered the name and location of the trace people tools to create and store the output of client sessions on the same tab. Then tried another connection to the database, using the pside.exe utility. The text resulting in the newly created text file showed the last executed statement was a select on the table psdbowner. I removed my trace entries using pscfg.exe to stop tracing.
Using the information provided by the last executed statement, I ran a request and discovered that the length (dbname) for the value of the column in the psdbowner table was one character longer than the expected value.
After update the column value by removing the end interval, the utility psadmin on the server worked without error.
-
I just upgraded to Mac OS 10.12 Sierra. Now my HP Photosmart Premium C410A apparently scans the document perfectly (I can see it on the screen of the computer when the scan is complete). However, he craps out when I try to save the document. Enforcement either abnormally is abandoned and firm, giving me this error pop up with ad nauseam screen computer jibberish, or I get the following error message: "error: an error occurred saving the file because it could not be written to." Check the properties of the file to ensure that it is not dead. »
Scanning and saving documents are critical to my business. I just have to solve this ASAP. Looking for solutions. Any ideas?
Hello
It is incompatible with the Sierra of HP scanning.
Applications > file HP travel HP Scan to the trash, then empty the trash.
Download and install HP Easy Scan instead, it will be installed in the Applications folder:
Kind regards
Shlomi
Maybe you are looking for
-
Problems to add maps for portfolio apple
I recently bought a Apple SE and wanted to add my HSBC account we based as I live in France and could not complete the operation. I called HSBC and they say you must be present in the United States to do this. I entered my credit card Chase on my por
-
Did the update to Firefox today and now problems with Comcast
I did the update to Firefox today. I am able to connect to Comcast, but can't stay connected. I go to the home page, it tells me that I'm not connected, so I go to the log in page, log in, and it brings back me to the home page showing that I am conn
-
Cannot enter BIOS or boot from CD - Satellite 5100
Hello one of my friends has ruined his Toshiba Satellite 5100.He has erased all the partition on the disk hard while the laptop always using the default setting.so, I could not boot from the cd or enter the BIOS.Is there any solution for this? Thank
-
LabVIEW community support, we need your help. We found this question on a discussion of embedded design forum. A verilog programmer plans to LabVIEW FPGA to update his project. We feel that his question perhaps justify a wide discussion of real user
-
Hello I have a HP Envy all-in-one and have been very happy with it; It came with Windows 8. One of the applications on the start screen is HP help wehich has several tiles whne you open it; one of these is Windows Help. This brings to turn on the Mi