1.2 of the ISE and ACL with several ports

Similar Questions

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• I'm administrator, but do messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator

  original title: administrator problem

  I am the administrator with a password (in fact the only user of my computor) but continue to receive messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator. How to work around this problem? My os is Vista Home Premium.This happens more frequently when I try to remove a program

  According to what "program", you tried to 'delete '.

  If one of these programs to the system, you will get the message.

  If it's one of those programs that you have installed from the web, try one of these programs to "Uninstall" part 3:

  Revo Uninstaller 1.91
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  IObit Uninstaller 1.1
  http://download.CNET.com/advanced-uninstaller-free/3000-2096_4-75157230.HTML?tag=mncol

  Advanced Uninstaller Free 10.1.1
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• perdir media that came with the license, and I made several downloads of the version most always displays the message is not valid

  perdir media that came with the license, and I made several downloads of the version most always displays the message is not valid

  Error: "serial number is not valid for this product". Adobe Creative Suite

• Need to insert the Date and time with AM or PM

  StartDate form has ' 25/07/2006' and Starttime "13:07.
  I need to add this field in the database to display the Date and time with the AM or PM. But the result I get is false.
  <! - concatenate fields - >
  "< cfset Startdate = #Startdate # &" "& #starttime # >.
  
  < cfset startdate = #DateFormat (CreateODBCDateTime (Startdate), ' mm/dd/yyyy hh: mm: tt ') # >
  Here is my production. This is not the AM or PM conversion part of the chain.
  
  25/07/2006 01:07 am
  
  My database is SQL 2000
  

  You use any of dateformat. The createodbcdatetime sends the correct your DB value if you do it right.

• Compare Dot1Q and QinQ with access ports and trunk?

  Hi all

  How do you compare Dot1Q and QinQ with access ports and trunk?

  Thank you

  Sunil Kumar

  Hey, Sunil,.

  With regard to your questions:

  1. we have a case of Dot1Q configured on the port of access of habit?  If not, then why? - Dot1q aims to tag executives leaving the switch and access is opposite, it does not therefore not used together marking.

  2. how the topology would be for QinQ case? - For QinQ as I mentioned in my last post one side will be set to while links to access than others. A simple example is explained on this link:http://networklessons.com/switching/802-1q-tunneling-q-q-configuration-example/

  HTH.

  Kind regards

  RS.

• 1.3 the ISE and multiple licensing requirements

  I am building a box of ISE 1.3 and I want to know if the following is feasible

  I have an AD forrest who has several groups of configured users

  1. Corporate
  2. BYOD
  3. demo

  What I want to do, use these groups to assign users wireless to the VLAN correct based on the membership of these groups AND the type of device they are connecting from.

  for example User1 connects to the network wireless from a Mac.  And they belong to the Group of corporate users.  I would like to be put on the vlan corporate.

  However, are they connect from their IPhone device and also belong to the Group BYOD, they get put on VLAN BYOD which has restricted access.

  I guess I should add User1 to the company and the BYOD AD groups, then the terms of use to determine what type of device they use and then create a profile for authorization to manage this VLAN they deleted in.  Then use airespace acl to determine what resources, they have access to.

  Unfortunately, the interface has changed a bit from 1.2 to 1.3, and I don't know if this is feasible.

  I advise to use the BYOD within the ISE feature that uses the device registration. All devices are on (default) RegisteredDevices group identity within the ISE, so that your authorization policy can look if EndPointIdentityGroup = ADGroup RegisteredDevices AND = BYOD then = BYOD VLAN + ACL.

  Put your saved rule BYOD above all others in the list for your rule of Group of companies don't replace the BYOD.

• 1.2 of the ISE and made maximum PSN supported in my Persona config

  Hello people, I am setting up a way large-scale distributed of ISE and I was wondering if anyone could tell me what the maximum number of PSN is allowed in this configuration.   I was reading through an older training document with version 1.1 and suggested 5, that's why I wonder if the specs changed on 1.2 but I can't find them anywhere to practice.

  I have a large virtual machine running the MAIN admin character who is also secondary to my report & follow-up in my main data centre.

  In another State (bound to 10G) is another large VM acting as my character high school admin with primary oversight & reports.

  Across several States I want to have multiple Ssnp through geographic patterns of each State, but I don't know if I can put across enough with my current version of 1.2 and my persona config Ssnp listed above.    I need about 12 to 15 Ssnp.

  I was wondering if I need two VMs more out of my control as a node in DC1 and secondary surveillance in DC2 for more extensibility PSN.

  Any help would be greatly appreciated.

  -Thank you

  As Marvin suggested, I would look at using 1.3 at this point, unless you have any specific concerns of this version and I really want to stay with 1.2. That being said, here are my recommendations/comments:

  -Two v1.2 and v1.3 fits in fact up to 40 knots PSN

  -If none of the nodes of your PSN will be put in the same place and are layer 2 adjacent I recommend putting them in a group node and behind a load balancer. If you do not have a load balancer, I would always put them in a node group. At this time a node group can have up to 10 PSN

  -If you have 10-15 knots PSN then you should spend 2 nodes for specifically for the character of monitoring

  -The period of maximum round trip between all nodes must not exceed 200 ms

  For more information, you can always reference the "Network deployment" section in the installation guide material for ISE:

  v1.3

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/1-3/installation_guide/b_ise_InstallationGuide13/b_ise_InstallationGuide12_chapter_00.html

  v1.2

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/1-2/installation_guide/ise_ig/ise_deploy.html

  Thank you for evaluating useful messages!

• 1.3 of the ISE and NAC

  I have a client that 5508 WLCs runs through the area, and I'm catching IEEE802.1x authentication for the enterprise WLAN and WebAuth for WLAN of comments... they PSK now :(

  They have ad and ISE and NAC great interest, so my immediate thoughts are to integrate ISE AD and use ISE as RADIUS server for .1x on the WLC. Then use the WLC and ISE do WebAuth for comments... It's all of the standard stuff, but it gives the background.

  Now, we come to the interesting bit... they want to run BYOD. They are involved in the financial markets, so the BYOD must be tightly controlled. They ask on ISE coupled with the NAC, but I am not convinced that I need the NAC since the arrival of the ISE1.3. Of course, I will examine three (min) SSID, corporate knowledge, comments and BYOD, just logically distinct. I have nothing that ISE 1.2 cannot press the company and comments but BYOD must full profiling and reclamation prohibition or device before access to the net.

  Someone at - he comments or suggestions? Is ISE 1.3 enough NAC-like that I don't need more, or if this is not the case, what additional benefits does that ISE can support

  Thanks for your advice/comments/experiences

  Jim

  Hi Jim -.

  Version 1.3 offers an integrated PKI and a significantly improved services reviews experience. The internal PKI is nice if the customer does not have a PKI solution in place. Don't forget however that the PKI ISE internal can only issue certificates to BYOD devices which have boarded through the ISE BYOD "flow", you cannot use the ISE PKI to issue certificates to computers in the domain.

  With regard to the NAC: you need to specify exactly what is needed here. If you were to make "posture assessment" then ISE can do for machines based on Windows and OSX. You can check for things like: A / V, a/s, status of the firewall, Windows hotfixes. If you want to make the posture on mobile devices, so you will need to integrate ISE with MDM (mobile device management) solution such as: Airwatch, Mobile, Extend360 iron, etc. ISE may question the MDM for things like: the device is protected with a PIN, is the rooted device, is the encrypted device, etc.

  I hope this helps!

  Thank you for evaluating useful messages!

• Will buy the Xoom and use with MIFI

  I intend to buy the Xoom and use it only with Mifi (on the road) and my wireless router (at home), if I have to buy with Verizon CDMA, I'll do it, but I don't intend to start a plan with Verizon, I hope that it works for the units that are selling from 02/17/11.

  The XOOM has wifi, so your Mifi will work with him. you wouldn't buy a package given just the XOOM.

• A few days, I bought a mac mini which I transferred the data and programs with time machine: programs have been updated except for iMovie, and now it seems that I have to pay for the update: possible? What I am doing wrong?

  A few days ago, I bought a mac mini and I transferred all my data and programs with time machine: all programs have been updated but iMovie (7.1.4)... However, it seems that, to update to the latest version, I have to pay to download on Appstore: is it possible? what I am doing wrong?

  If it were a new mac mini, you need already installed 10.1 iMovie.  Otherwise, but you already have iMovie 9 registered version to your Apple ID, you can upgrade to version 10 for free, but if (as it appears) is an earlier version then you have to buy version 10.

  Geoff.

• Synchronization of the inputs and outputs with different sampling frequencies

  I'm relatively new to LabView. I have a NOR-myDAQ, and I am trying to accomplish the following:

  Square wave output 10 kHz, duty cycle 50%.

  Input sampling frequency of 200 kHz, synchronized with the output that I get 20 analog input samples by square wave, and I know what samples align with the high and low output of my square wave.

  So far, I used a counter to create the square wave of 10 kHz, display on a digital output line. I tried to pull the document according to (http://www.ni.com/white-paper/4322/en), but I'm not sure how sample at a different rate than my clock pulse. It seems that this example is intended rather to taste one entry by analog clock pulse. There may be a way to create a faster clock (200 kHz) in the software and use that to synchronize the analog input collection as well as a slower 10 kHz output generation square wave?

  I eventually have to use the analog inputs to obtain data and an analog output to write the data channel, so I need the impetus of the square wave at the exit on a digital PIN.

  How could anyone do this in LabView?

  Hi Eric,.

  All subsystems (, AO, CTR) derive from the STC3 clocks so they don't drift, but in order to align your sample clock HAVE with pulse train that you generate on the counter, you'll want to trigger a task out of the other. I would like to start by a few examples taken from the example Finder > Input and Output material > DAQmx. You can trigger GOT off the train of impulses, start by Gen digital Pulse Train-keep -you probably already use a VI like this to generate 10 k pulse train. AI, start with an example like Acq Cont & chart voltage-Ext Clk - Dig Start.vi-you'll want to use the internal clock so just remove the control of the "Source of the clock" and it uses the internal clock. From there, simply set the "Source of the command" either be the PFI line generates the meter, or ' //Ctr0InternalOutput '-assuming that you are using the counter 0. You'll want to make sure that the start of the task HAVE faced the task of counter I is ready to trigger off the first impulse. They should be aligned at this point.

  For debugging, you can use DAQmx export Signal to export the sample clock - you can then brought the train line and the PFI pulse to make sure that they are aligned.

  Hope this helps,

  Andrew S

• Camera does not show the extent and automation with Legacy 1394 drivers

  Hello

  I have a Guppy AVT Firewire camera and try to get this camera working on a new Windows 7 PC, I have here.  The PC is running Windows 7 Professional 32 - bit.  When I connect the camera to the computer, it installs the driver NOR-IMAQdx IIDC, the camera appears in the studio of measurement and automation (version 4.6.2) under the heading "devices OR-IMAQdx", and everything seems to work great.  However, I need to use the legacy driver.  When I select the "Legacy IMAQ IEEE 1394 IIDC" driver, the device disappears from measurement and Automation Studio.  Reboot of the camera or to disconnect and reconnect the camera do not help.  In the Windows Device Manager, the la camera camera shows that the use of inheritance OR IMAQ IEEE 1394 driver (11/10/2006, version 2.0.5.0 that day), and windows reports it as working properly.  However, it is not always on display of the measurement and Automation and my application cannot see the camera.

  Here is what I tried:

  * Update the NI Vision Acquisition version 2009.11 software.

  * Make the legacy NOR-IMAQ for cameras 1394 2.0.5 is installed

  * A tried the same device with the same software on an old PC running Windows XP and found everything works as expected it.

  * A tried a card PCI IMAQ 1405 in the Windows 7 PC, which works very well.

  * Search in the forums.  I found several references to this document which refers to issues where disappear from the camera of measurement and Automation Explorer:

  http://digital.NI.com/public.nsf/allkb/22AD45D8A5B053AF86256EB5003B2811?OpenDocument

  It seems that it might apply to my situation, however, the link is dead for me.

  Thanks for any help!

  I suggest you to install the bus driver 1394 AVT on your PC.

  This replaces the microsoft implementation of the 1394 Protocol and is better suited to the activities of the vision.

  You always can choose IMAQdx or old drivers.

  http://www.alliedvisiontec.com/EMEA/products/software/Windows/AVT-1394-busdriverpackage.html

  However, I'm not sure if it will work on windows 7

  Ben Engelen

• All the icons and files with the extension .lnk and error message: "Windows cannot open these files.

  Original title: STUCK IN. LNK ??????????????????????????????????????????????????????????????

  all my icons turned into extensions of file and state that "windows is unable to open these files. I can't search the Web for a fix, because it downloads as a .lnk I can't open as well?

  Hi MarcSatz,
   
  -Did you change on your computer before this problem?
   
  This problem occurs when one or more of the following conditions are met:
  • The registry values that are associated with the file name extension are corrupted or missing values.
  • The computer is infected with a virus.

  Here is an article that will guide you in the process of fixing the issue:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
   

  Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer

• Ive accidentally lost all the icons off the coast of the opening of the page and left with a scanned document?

  Ive lost accidnetl all my icons amd left the documents scanned on my homepage?

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.