11.1.2.4 planning metadata load errors RemoteException occurred in the server thread

Similar Questions

• ESXi 5.5u1 added iscsi storage adapter - reboot and now vSphere Client could not connect to "my ip" an unknown error has occurred.  The server could not interpret the customer's request.  The remote server returned an error (503) server unavailable

  I have not yet connect to an iSCSI target device.

  I can ping my host

  when I open http:// "hostip" in a web browser, I get a 503 service not available.

  restart the host gets me nowhere.

  SSH opens somehow, but can not connect

  Console seems OK

  vSphere Client can not connect

  If I reset to the default values of the console it is ok, but when I reconfigure the host, this error will be returned.

  I tried to reinstall from DVD

  I'm completely corrected to date via SSH esxcli

  This happens on both my hosts, although they are almost identical Lenovo thinkserver TS140s with broadcom 10Gig NIC and intel NETWORK card integrated

  It almost always seems to happen the next time I reboot after enabling iscsi support

  The only weird thing I have is that my Integrated NIC is a processor intel 217's and I have to use a special VIB so that it can be used in ESXi

  Customer's winning 8.1

  Here is my installation notes

  Install on USB/SSD stick with custimized ISO i217 NIC driver, reset the configuration and reboot

  Management NIC set to NIC0:1Gig

  IP management: hostIP/24 GW: my gateway

  DNS:DNS on windows vm1, vm2 Windows dns

  HostName:ESXi1.Sub.myregistereddomainname custom DNS Suffixes: sub.myregistereddomainname

  Reset

  Patch to date (https://www.youtube.com/watch?v=_O0Pac0a6g8)

  Download the VIB and .zip in a data store using the vSphere Client

  To get them (https://www.vmware.com/patchmgr/findPatch.portal)

  Start the SSH ESXi service and establish a Putty SSH connection to the ESXi server.

  Put the ESXi server in maintenance mode,

  example of order: software esxcli vib install /vmfs/volumes/ESXi2-2/patch/ESXi550-201404020.zip d

  Re install the Intel 217 NIC driver if removed by patch

  Change acceptance ESXi host sustained community level,

  command: esxcli software - acceptance-level = CommunitySupported

  Install the VIB

  command:esxcli vib software install - v /vmfs/volumes/datastore1/net-e1000e-2.3.2.x86_64.vib

  command: restart

  Connect via VSphere client

  -Storage

  Check/fix/create local storage. VMFS5

  -Networking

  vSwitch0

  Check vmnic0 (1)

  Network port group rename VM to the 'essential '.

  Rename management group of network ports for management of basic-VMkernel traffic.

  -Configuration time

  Enable NTP Client to start and stop the host. ntp.org set 0-3 time servers

  DNS and routing

  Start the virtual machine and stop

  -enable - continue immediately if tools start - stop - prompted action Shutdown - the two delay to 10 seconds

  Security profile

  Services

  SSH - startup - enable the start and stop with host

  Cache host configuration

  -Properties to start SSD - allocate 40GB for the cache host.

  Flashing warnings SSH:

  Advanced settings, UserVars, UserVars.SuppressShellWarning, change from 0 to 1.

  Storage adapters

  -Add - add-in adapter software iSCSI

  I think I saw that I was wrong.  In fact, I applied two patches when only suited. I started with 5.5u1rollup2 and then applied the ESXi550-201404001 and ESXi550-201404020.  Strangely I did not t o had problems until I worked with iSCSI.

• Often, I get the message error "Firefox cannot find the server.

  Often, I get the message error "Firefox cannot find the server. Page normally, refresh the page to load, even if sometimes it takes more than one try.

  I checked my connection settings. IPv6 and DNS prefetching are disabled, according to the recommendations in this article: https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can?s=Firefox+can%27t+find+the+server+at & r = 1 & as = s

  See also:

  • http://KB.mozillazine.org/Error_loading_websites
  • https://support.Mozilla.com/kb/error+loading+Web+sites

  You can try to reset (power off / on) of the router.

• None of my troubleshooting services work "an unexpected error has occurred and the convenience store could not be started" 0x8007045A error

  I can't use my convenience store. I can't even connect to the internet on the internet wireless network card. It says "an error occurred during the loading of the troubleshooting tool: an unexpected error has occurred." the Troubleshooting Wizard can not continue. 0x8007045A error code. Please help me. How can I fix it

  Hello Max,.

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. You did it all change (hardware or software) before the show?
  2. You receive error message when running the troubleshooter from network?

  0x8007045A error Codes are caused by files system badly configured in your windows operating system. It is format of common error code used by windows and other software compatible windows and driver vendors.

  There may be a lot of events which may have led to file system errors. An incomplete installation, an incomplete uninstallation, incorrect removal applications or equipment. It can also be caused if your computer is retrieved from an attack of the adware/spyware or virus or by an abnormal shutdown of the computer. All assets that the above may result in the deletion or corruption of entries in the windows system files. This corrupted system file will cause information missing and wrong linked and files needed for the proper functioning of the application.

  Try it out below mentioned steps and check if it helps.

  Method 1:

  Update or reinstall the Microsoft XML parser

  To download the latest XML parser, visit the following Microsoft Web site:

  http://msdn2.Microsoft.com/en-us/XML/bb190622.aspx

  (http://msdn2.microsoft.com/en-us/xml/bb190622.aspx)

  Method 2:

  Replace corrupted files

  To resolve this issue, follow these steps:

  1. Copy the following DLL files in the C:\WINDOWS\SYSTEM folder on a computer that runs on the computer that is experiencing the problem:
  • Msxml3.dll
  • Msxml3a.dll
  • Msxml3r.dll

  2. after replacing the files, you must save the files. To save the files, follow these steps:

  1. Click Startand then click run
  2. In the Open box, type REGSVR32 C:\WINDOWS\SYSTEM\MSXML. DLLand then click OK. You receive a message when the registration is successful.
  3. Repeat steps a and b with the following files:
  • C:\WINDOWS\SYSTEM\MSXML2. DLL
  • C:\WINDOWS\SYSTEM\MSXML3. DLL

  4 restart your computer.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Firefox Version 27 Action Menu error in Reporting Services. An error has occurred with the extraction of data.

  Hello, since I've updated for Firefox 27.0.1 on Windows 7, I have a problem with Reporting Services on a Sharepoint site. It is a site of Sharepoint 2010 with SQL Server Reporting Services 2012 Sharepoint integrated mode. I was already on Firefox version 26 and didn't meet with this problem.

  When a report is opened and you use the Actions link on the Reporting Services toolbar, I get the following error messages.

  An error has occurred with the extraction of data. Please, refresh the page and try again.

  I tried updating to the beta version of Firefox 28 but the same error occurs. I see that someone else is having the same problem here. http://SharePoint-community.NET/forum/topics/reporting-service-and-Firefox-27

  Any help would be appreciated. Thank you!

  Ryan

  Firefox version 28.0 has corrected this problem. Thank you!

• I can't send an e-mail. I get a message that says "an error has occurred on the POP3 mail server. What can or should I do? Thank you very much

  As I said, I use Mozilla Thunderbird for my emails. I can't send an e-mail. All I get is a message saying: "an error has occurred on the POP3 mail server. What should I do to get this working and sending emails? Thank you, Gary

  Suggest you try the Thunderbird support forum at http://getsatisfaction.com/mozilla_messaging.

• How can I fix, "an error has occurred in the script on this page line: 2107"?

  How can I fix "an error has occurred in the script on this page line: 2107, Char: 1? I've recently upgraded to Explorer 9

  Hello

  I'll try to uninstall IE9 as shown in the link below.

  http://www.uniquetipsonline.com/how-to-uninstall-Internet-Explorer-9-from-Windows-Vista-and-Windows-7/

  When this is complete and you have restarted the PC, see if you can now print.  If everything works well, try reinstalling IE9 with your security software temporarily disabled during installation.

  Kind regards

  DP - K

• Error-50400 occurred to the Invoke method: FIFO. Read in Host.vi

  Hey there,

  We have sensors on an engine which are connected to a Board of Directors OR cRIO 9014 (with a NI9411 6 digital input modul channels) and from there, via the network to a host computer.

  cRIO jury: the jury cRIO collects data from the engine and stores in a buffer, it's because the network is to slow for the size of the data

  Host: bed of the host computer in the network buffer on the map of cRIO, on the host computer, it takes specific portions of the data to create charts of the engine pressure

  Error:

  Error-50400 occurred to the Invoke method: FIFO. Read in Host.vi

  Possible reasons:
  The transfer did not complete in the time-out or the specified number of retries.

  This error occurs in the following scenario:

  -motor is running

  -cRIO is running

  When I press the Start button (boolean 3) in the host.VI to start reading the data of the card AFTER I pressed the button to run the host VI.

  The error will not occur if I pressed the button start (3-Boolean) BEFORE I pressed the button to run the host VI.

  We tried to increase the timeout, but it still does not work, the error occurs!

  We would be really happy if you could look over it and help us in this case! If you need more information or if we need to clarify a specific part, please let us know!

  We have included the VI in the attachment!

  Thanks in advance!

  CHRISSE,

  There are a few things wrong in your application, if I can offer a few suggestions.

  First of all, your loops are not running in parallel.  In fact, they are in while loops with a real constant wired for them. I don't know if this is normal for debugging, or on accident.  I would put the question (read pulling elements Dummies) out of your hand while loop.

  Your second nested while that the loop (that of the poll the number of items and then shooting them) will execute only once and can make only a few samples.  I don't think that that's what you're looking for here, and there are two ways we can go here.  You might question continually until you have 0 items available for x time, then you know that you have no more available samples and you can process all the data, OR you can put your computer through this loop and always just write in the file immediately in the form x samples are drawn.

  In addition, the stop of the main loop condition is ( <= 3)="" therefore,="" it="" will="" run="" once="" and="" then="" stop. ="" maybe="" you="" mean="">= 3?

  In addition, you have "add to the file" disabled on your writing to the worksheet, so whenever you write that you are overwriting the old data.  If you want to write constantly, you will lose data.  This can be cured in this affecting true (requiring a new name for file or programmatically removing the old worksheet each time that you run the vi) OR you can recover all your data in a shift register and only write to the file once you have all your available data.

  The error you see is because you try to close your FPGA reference twice.  Simply close it once.

  After seeing your overview, I think this can be cured by simply reading wiring to get your 1440 X 4 items, but as we have seen, this does not work.  Something happens in your system... that's what I want you do... just run the following... code and let me know how much remaining elements it gives you... Once the number remains (I hope for this, and your engine continue to function), press stop, and all values will be presented on a graph for you.  My broken wires are because I do not have the FPGA VI.

  

• Another thing appears and it says: "an error has occurred in the application. I hit restart request,

  I have a problem with my BSplayer. I'm trying to open a video and the BS 'bar' appears, but there is no video. Another thing appears and it says: "an error has occurred in the application. I hit restart request, it did not work. I also tried to see the bug report, but I couldn't understand him. Please help me. Moreover, it worked great yesterday. And I also tried with other videos but with the same result.

  Hello

  Uninstall/reinstall or you might ask their Support Forums.

  Cheer.

• Script error it appears on every page. An error has occurred in the script on this page don't you wanty to continue. How can I get rid of him.

  A small boc appears in the center of my screen.  Says: Script error on top.  Then, an error has occurred in the script on this page do you want to continue running the script on this page.  YES or NO how to stop this box to appear.

  Go to tools-Alt | Internet Options | Advanced (or control panel |) Internet Options | Advanced) in IE and the box disable script debugging and uncheck the box to show a notification of every script error.

  Steve

• Media Player an error has occurred in the script on this page.

  When I try to find album info I get the following:

  An error has occurred in the script on this page.

  Line: 1

  Tank: 243

  Error: Automation server can't create object

  Code: 0

  http://fai.music.metaservices.Microsoft.com/fai/scripts/default.js

  Do you want to continue running scripts on this page?

  Hello

  
  1 did you change on your computer before this problem?
  2. who is the operating system installed on the computer?
  Method 1:
  You can run the troubleshooter in the Windows Media Player library.

  Open the troubleshooter in the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2:
  You can try to re - register wmp.dll file.
  a. click on start.
  (b) in the type box command prompt search.
  c. right-click and select run as administrator.
  d. type the following commands
  
  regsvr32 wmp.dll, and ENTER.

  regsvr32 jscript.dll and ENTER.

  regsvr32 vbscript.dll and ENTER.
  

  Method 3
  
  You will have to perhaps to regenerate the database of Windows Media Player and see if it works very well.
  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:
  a. exit Windows Media Player.
  b. Click Start, in the search for box %LOCALAPPDATA%\Microsoft\Media Playertype and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.
  d. restart the Player Windows Media .
  
  Note: Windows Media Player automatically rebuilds the database
   
  Method 4:
   
   
  Windows Media Player, all by going online to find the information of the Album follows the same set of rules that governs the internet Explorer. Therefore, you can follow the steps mentioned in the article below for a possible resolution to the question:

   

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260

   

   

  I hope this helps.

• Error at startup, "an error has occurred in the program during installation... ox80070002.

  Original title: Constanr Error Message at startup.

  When I start my computer the message appears on the screen that says "an error has occurred in the program during installation... ox80070002" How can I fix?

  Open log on to Windows as administrator or an account with administrator rights.
  Click Start | All programs | Accessories | System Tools, and then click System Restore.

  Then, in the window system restore, click on the option "Restore my computer to an earlier time" (Note: this option)

  may already be selected), then click Next.
  In her select a Restore Point window, use the calendar to select a date before the day of the change or problem o

  Next.
  Note: A system restore message may appear that lists configuration changes that system restore will make. Click OK.
  In the page confirm the Restore Point selection, click Next.
  System Restore will now restore Windows XP configuration, and then restart the computer.

  Finally log on to the computer (using the same Admin account).
  The system restore restoration complete 'window' is displayed.
  Click OK.

  Your fact restore the PC to the point in time, you have selected.

  J W Stuart: http://www.pagestart.com

• an error has occurred in the script on this page. expected tank 21079 error code line 2 0

  Windows media player 11
  an error has occurred in the script on this page.
  line 2
  Char 21079
  expected error
  code 0

  Hello

  Thanks for the post. I understand that you meet the on Internet Explorer script error.

  I suggest you check out the link and follow the steps.

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260

  Hope it will be useful.

• Continually, I get the error that cannot reach the server while trying to install SP1.

  Win XP Pro reloading, get all updates

  I reinstalled Windows XP Pro and need to update to SP1 to 3 as well as all security updates.  (After download) installation, SP1, I continually get the error that cannot reach the server, visit Web of MS for a version that requires no web access if the problem persists. I can't find this version of SP1 that does not need to happen on the server from Ms.  In addition, isn't there an easier way to get all updates when you perform a new installation instead of going one by one with all the updates?

  If you have SP1A, then you can go straight to the installation of SP3.  If you have SP1, then you need to install SP1A or SP2 before going to SP3.  You can get the updates described in the following article:

  "How to obtain the latest Windows XP service pack"
    <>http://support.Microsoft.com/kb/322389/ >

  HTH,
  JW

• Message: "an error has occurred in the script.' when tried to open services

  Original title: Internet Explorer Script error

  When I go to administrative tools, and open Services, a notification stating 'an error has occurred in the script.'

  Online: 31

  Tank: 12

  Error: Library not regisetred

  Code: 0

  URL: res://C:\WINDOWS\System32\mmcndmgr.dll/views.htm

  Pls help me solve the problem.

  I am using windows xp sp3 and IE 8

  Hi daveliew1998,

  Try these steps and check the result.
  Step 1: Scanner of sfc (System File Checker) to see if any system file is missing or damaged. To do this, try the following steps:
  a. Click Start, click Run, type cmd and click ok.
  b. at the command prompt, type sfc/scannow and press ENTER.
  c. once the analysis is complete, restart the computer and check if the problem persists.

  Note: You will be asked to insert the Windows XP disk, if a file is missing.

  For more information, see Description of Windows XP System File Checker (Sfc.exe)

  Step 2: If the problem continues, check if it runs in safe mode, and you might consider the publication of details for further assistance
  See start the computer in safe mode

  Visit our Microsoft answers feedback Forum and let us know what you think.